Opening of Bids - Seitz Park Reconstruction Phase I Proj No. 117-093A - Northern Indiana Construction Co., Inc.

Home Browse Search

There will be two (2) Whelen Model M6BUW, LED backup lights provided in the tail light housing. LICENSE PLATE BRACKET There will be one (1) license plate bracket mounted on the rear of the body. A white LED light will illuminate the license plate. A stainless steel light shield will be provided over the light that will direct illumination downward, preventing white light to the rear. LIGHTING BEZEL There will be two (2) Whelen, Model M6FCV4P, four (4) place chromed ABS housings with Pierce dos provided for the rear M6 series stop/tail, directional, back up, scene lights or warning lights. BACK-UP ALARM A PRECO, Model 1040, solid-state electronic audible back-up alarm that actuates when the truck is shifted into reverse will be provided. The device will sound at 60 pulses per minute and automatically adjust its volume to maintain a minimum ten (10) dBA above surrounding environmental noise levels. MARKER LIGHTS There will be one (1) pair of amber and red, Britax, Model 1_427.203112, LED marker lights with rubber arm, located one each side rear body corners of truck. The amber lens will face the front and the red lens will face the rear of the truck and be the most rearward marker light. These lights will be activated with the running lights of the vehicle. CAB PERIMETER SCENE LIGHTS There will be four (4) Amdor, Model AY-LB-12HW020, 350 lumens each, 20.00" white LED strip lights provided, one (1) for each cab door. These lights will be activated automatically when the battery switch is on and the exit doors are opened or by the same means as the body perimeter scene lights. BODY PERIMETER SCENE LIGHTS There will be two (2) Amdor, Model AY-LB-12HW020, 350 lumens, 20.00" long, white LEDs, 12 volt DC lights provided at the rear step area of the body, one (1) each side shining to the rear. The perimeter scene lights will be activated when the parking brake is applied. STEP LIGHTS There will be two (2) white LED step lights will be provided at the rear to illuminate the tailboard/step area. In order to ensure exceptional illumination, each light will provide a minimum of 25 foot-candles (fc) covering an entire 15" x 15" square placed ten (10) inches below the light and a minimum of 1.5 fc covering an entire 30" x 30" square at the same ten (10) inch distance below the light. These step lights will be actuated with the perimeter scene lights. All other steps on the apparatus will be illuminated per the current edition of NFPA 1901. 53 of 89