Laserfiche WebLink
All lights and reflectors, required to comply with Federal Motor Vehicle Safety Standard #108, will be <br />furnished. Rear identification lights will be recessed mounted for protection. Lights and wiring mounted <br />in the rear bulkheads will be protected from damage by installing a false bulkhead inside the rear <br />compartments. <br />An operational test will be conducted to ensure that any equipment that is permanently attached to the <br />electrical system is properly connected and in working order. <br />The results of the tests will be recorded and provided to the purchaser at time of delivery. <br />BATTERY SYSTEM <br />There will be four (4) 12 volt Exide@, Model 31S950X3W, batteries that include the following features <br />will be provided: <br />• 950 CCA, cold cranking amps <br />• 190 amp reserve capacity <br />• High cycle <br />• Group 31 <br />• Rating of 3800 CCA at 0 degrees Fahrenheit <br />• 760 minutes of reserve capacity <br />• Threaded stainless steel studs <br />Each battery case will be a black polypropylene material with a vertically ribbed container for increased <br />vibration resistance. The cover will be manifold vented with a central venting location to allow a 45 <br />degree tilt capacity. <br />The inside of each battery will consist of a "maintenance free" grid construction with poly wrapped <br />separators and a flooded epoxy bottom anchoring for maximum vibration resistance. <br />BATTERY SYSTEM <br />There will be a single starting system with an ignition switch and starter button provided and located on <br />the cab instrument panel. <br />MASTER BATTERY SWITCH <br />There will be a master battery switch provided within the cab within easy reach of the driver to activate <br />the battery system. <br />An indicator light will be provided on the instrument panel to notify the driver of the status of the battery <br />system. <br />BATTERY COMPARTMENTS <br />Batteries will be placed on non -corrosive mats and stored in well ventilated compartments located <br />under the cab. <br />Heavy-duty, 2/0 gauge, color coded battery cables will be provided. Battery terminal connections will <br />be coated with anti -corrosion compound. <br />Battery solenoid terminal connections will be encapsulated with semi -permanent rubberized compound <br />48 of 89 <br />