Laserfiche WebLink
• Left turn <br />• Right turn <br />• Battery on <br />The following blue telltale lamp will be provided: <br />• High beam <br />Alarms <br />Audible steady tone warning alarm: A steady audible tone alarm will be provided whenever a warning <br />message is present. <br />Audible pulsing tone caution alarm: A pulsing audible tone alarm (chime/chirp) will be provided <br />whenever a caution message is present without a warning message being present. <br />Alarm silence: Any active audible alarm will be able to be silenced by holding the ignition switch at the <br />top position for three (3) to five (5) seconds. For improved safety, silenced audible alarms will <br />intermittently chirp every 30 seconds until the alarm condition no longer exists. The intermittent chirp <br />will act as a reminder to the operator that a caution or warning condition still exists. Any new warning <br />or caution condition will enable the steady or pulsing tones respectively. <br />Indicator Lamp and Alarm Prove -Out <br />A system will be provided which automatically tests telltale indicator lights and alarms located on the <br />cab instrument panel. Telltale indicators and alarms will perform prove -out at initial power -up to ensure <br />proper performance. <br />Control Switches <br />For ease of use, the following controls will be provided immediately adjacent to the cab instrument <br />panel within easy reach of the driver. All switches will have backlit labels for low light applications. <br />Headlight/Parking light switch: A three (3)-position maintained rocker switch will be provided. The first <br />switch position will deactivate all parking and headlights. The second switch position will activate the <br />parking lights. The third switch will activate the headlights. <br />Panel back lighting intensity control switch: A three (3)-position momentary rocker switch will be <br />provided. Pressing the top half of the switch, "Panel Up" increases the panel back lighting intensity and <br />pressing the bottom half of the switch, "Panel Down" decreases the panel back lighting intensity. <br />Pressing the half or bottom half of the switch several times will allow back lighting intensity to be <br />gradually varied from minimum to maximum intensity level for ease of use. <br />Ignition switch: A three (3)-position maintained/momentary rocker switch will be provided. The first <br />switch position will turn off and deactivate vehicle ignition. The second switch position will activate <br />vehicle ignition and will perform prove -out on the telltale indicators and alarms for 3 to 5 seconds after <br />the switch is turned on. A green indicator lamp is activated with vehicle ignition. The third momentary <br />position will temporarily silence all active cab alarms. An alarm "chirp" may continue as long as alarm <br />condition exists. Switching ignition to off position will terminate the alarm silence feature and reset <br />function of cab alarm system. <br />33 of 89 <br />