Laserfiche WebLink
Spec Formliners <br />I N C O R P O R A T E D <br />GENERAL INFORMATION <br />ATTACHMENT TO FORMWORK — Liners are <br />attached to the form using TEK screws <br />through the face of the liner spaced 12" C -C. <br />Optional form mounting T -nuts embedded <br />through the plywood backing is available for <br />Elastospec panels. <br />FORM RELEASE — Apply with low flow, wide <br />angle, flat spray nozzle and wipe with a cloth <br />to insure a complete even coat to the entire <br />form liner surface. Do not over apply form <br />release agent. Protect treated form liners <br />from precipitation, dust, and debris. Do not <br />apply to reinforcing steel. Dayton Superior <br />Liner Coat? (J-4 LC) form release is approved <br />for all form liner materials. <br />TECHNICAL SUPPORT — Contact Spec Formlin- <br />ers, Inc. 888429-9550 <br />Pattern Number: 1 5 0 5 <br />Madera Flagstone <br />1-3/4" to 2" relief, large irregular stone, pattern <br />matches side to side and top to bottom <br />Ends and sides are texture matched. <br />Panels can rotate, allowing random pattern layout. <br />Thermo5pect' <br />Single Use <br />ThermoSpectm Multi -Use <br />HIGH IMPACT STYRENE <br />ABS REUSABLE PLASTIC <br />600% <br />Tear Strength D624 <br />200pli <br />Material Weights - Ibs/ft2 <br />Varies by Pattern <br />Property <br />I ASTM <br />I Rating <br />I Property I ASTM I <br />Rating <br />Tensile <br />D638 <br />3,700 <br />Tensile D638 <br />5,300 <br />Izod Impact <br />D256 <br />20 <br />Flexural D790 <br />9,300 <br />Vicat Softening <br />D1525 <br />212 <br />Hardness D786 <br />105 <br />IMaterial Weights - <br />lbs/ft2 <br />I Material Weights - <br />lbs/ft2 <br />10.070 MIL <br />0.090 MIL <br />0.150 MIL <br />0.110 MIL 0.150 MIL <br />0.200 MIL <br />0.393 <br />0.506 <br />0.843 <br />I <br />0.621 0.8.47 <br />I I <br />1.129 <br />Note: Plastic Liners may <br />require additional backing <br />ElastoSpect' 100% Solid Urethane <br />BONDED TO 3/4" PLYWOOD <br />Property I ASTM I Rating <br />Shore A D2240 <br />50-55 <br />Tensile D638 <br />800 psi <br />Elongation D638 <br />600% <br />Tear Strength D624 <br />200pli <br />Material Weights - Ibs/ft2 <br />Varies by Pattern <br />ThermoSpect' Standard Panel Sizes: 48" x 96" or 48" x 120" Custom Sizes and Art Panels available <br />ElastoSpectrn Customized Panel Sizes and Art Panels <br />Spec Formliners, Inc. 530 East Dyer Road, Santa Ana, CA 92707 <br />www.specformliners.com - Phone: 714 429-9500 - FAX: 714 429-1460 <br />