Laserfiche WebLink
TEST 6: DIMENSIONAL TESTING <br />TEST DESCRIPTION: To determine if the dimensions of the container are within the required dimensions <br />of industry standards. <br />DATE: February, 2016 <br />SUBJECT: Plastic Refuse Container <br />PRODUCT IDENTIFICATION: Rehrig 95 EG ROC <br />MINIMUM PERFORMANCE STANDARD: ANSI Z-245.60 establishes dimensional requirements for the cart. <br />This ROC seems to have features for both type B and type G lifters, so dimensions are recorded for each. <br />TEST PROCEDURE: <br />1. The ROC is placed on a smooth, level, horizontal surface. <br />2. The dimensions of the cart are measured using a calibrated metric measuring tape. <br />TEST RESULTS: <br />Dimension ('Type <br />a <br />c <br />d <br />e <br />f <br />9 <br />h <br />1 <br />m <br />n <br />p <br />I- (minus) m <br />Dimension (TVpeG) <br />A <br />B <br />Specification <br />Min: 26.5", Max: 33.5" <br />Min: 14.511, Max: 15.25" <br />711 <br />Max: 2.5" <br />Max: 1.25" <br />Max: 1.5" <br />Min: 1", Max: 2.25" <br />Min: 0.5", Max: 1.5" <br />Min: 0.5" <br />Min: 8" <br />Min: 5" <br />Max: 0.5" <br />Min: 1.875" <br />Max: 6" <br />Specification <br />,.. <br />Min: 15" <br />Min: 20", Max: 35" <br />SUMMARY: The ROC passes the ANSI Z245.60 standard. <br />Appendix 6: Photos of measurement equipment used. <br />SETE 6E4 September 28, 2016 <br />Measurement <br />26.563" <br />15.252" <br />N/A <br />1.562" <br />0.528" <br />0.514" <br />1.182" <br />1.500" <br />2.870" <br />9.375" <br />5.715" <br />0.347" <br />2.125" <br />3.660" <br />Measurement <br />15.0001, <br />28.125" by Figure 7 in ANSI, <br />Page 7of16 <br />