Opening of Bids - Spec V - Two More or Less 2019 or Newer Tandem Axle Stainless Steel Multi Use Dump Truck - Selking International

Home Browse Search

ii I led iri by W A J air ie TYPE DESCRIPTION The spinner assembly shall have adjustable deflectors manufactured from 3/16" stainless steel. The spinner motor shall be high torque/low speed mounted directly to the spinner disc with a cast hub. The spinner disc shall be 20" in diameter and manufactured of polyurethane. Spinner motor shall be installed with seal savers. SHALL BE AS SPECIFIED (Circle One) Cab Shield: Cab shield Shall be 7 Ga 201 #4 stainless high strength steel YES NO � Y strength w/ ical yield h of 50,000 PSI. Cab shield shall extend 24" � €� and be full width and shall be attached by welding. Cab shield shall have six (6) laser cut oval holes pre punched at the factory for emergency oval strobes facing forward. Cab shield shall have six (6) laser cut oval holes pre punched at the factory for emergency oval strobes facing rearward. Cab shield shall also have two (one per side) laser cut oval holes mounted on the side of the cab shield facing sideways. Telescopic The hoist shall be of telescopic design and have a Trunnion / NO Hoist: mounting. The hoist shall have a lifting capacity of 35 tons and shall be equal to a Mailhot cs130-5.5 3 stage double acting cylinder. The hoist shall be designed to operate up to 2,500 PSI and shall be self -bleeding. The hoist shall have a 1/4" wall construction with bronze glands and pistons to assure a smooth and durable bearing surface. The glands shall each be a continuous cast bearing, SAE-660 bronze with a tensile strength of 44,000 PSI. The cylinder head and piston shall be of a "ductile" continuously cast iron, with a tensile strength of 60,000 PSI. Each cylinder shall be internally sealed. The inside seals shall be of a u-cup design made of nitrate packing. The cylinder shall have a Melonized/Q.P. Running surface. 14