Laserfiche WebLink
- � etworkSolutions <br />b. Connector Type: NEMA5-15 <br />d. Cisco APs <br />a. Quantity:1 <br />b. PoE Type: 802.3at (PoE+) <br />5. Airflow — Devices should be placed in such a manner that air flows from a 'cold' aisle (intake) to a 'hot' aisle <br />(exhaust). Airflow specifications for each piece of hardware are provided below. <br />a. Catalyst 9300 <br />a. Port -side intake <br />b. Catalyst 2960CX: <br />a. Fanless <br />c. Cisco APs <br />a. Fanless <br />6. Structured Cabling — Devices should be supported with current cabling standards. <br />a. City of South Bend will provide Cat5e or better structured cabling in support of the network devices. <br />If lesser cable is utilized NSI is not responsible for the performance of connected network devices. <br />b. For any 10Gbps multimode links, City of South Bend is responsible for providing 50um, OM3 grade <br />fiber (2000 Modal Bandwidth) or better, which will provide for 300m of connectivity for 10Gbps SR <br />optics. <br />i. If City of South Bend does not have 50um, OM3 grade fiber for the specified 10 gigabit <br />connections. LRM modules and mode -conditioning patch cables will be used for <br />transporting 10Gbps over lower grade fiber. <br />7. Transceivers and Twinax— NSI is providing only the transceivers and Twinax as specified in the quote. The <br />provided hardware accounts for all connections based upon the information provided by City of South Bend during <br />the design. If the transceiver counts change following project acceptance, a change order can be submitted to <br />create a quote for the required additions. Additional fees may apply. <br />8. Patch Cables — NSI is providing all necessary fiber patch cables per the transceiver counts (including possibly <br />none). If the transceiver counts change following project acceptance, a change order will be submitted to create a <br />quote for additional cables. City of South Bend is responsible for providing any and all additional patch cables, either <br />fiber or copper, for this project unless otherwise specified. <br />9. Support Contracts — Due to the critical nature of networking equipment the following support agreements have <br />been recommended and quoted. <br />a. SNT —Provides 8x5xNBD replacement for hardware, Cisco TAC support and Cisco.com access for <br />software updates. <br />b. E-LLW — Provides 8x5xNBD replacement of hardware. NBD is not guaranteed and in some <br />instances longer replacement times may occur. <br />i. Provided with all Catalyst 2000, 3000, and 9000 Series Switches <br />c. LLW — Provides 8x5 replacement of hardware with an expected replacement arriving within 10 <br />www.nsil.com WHY we do is as important as II.Al1" we do (574) 271-0900 <br />