6B (2) - Laserfiche WebLink

Home Browse Search

identification signs must be approved by the Committee. a. Identification signs shall be constructed of masonry or stone materials. Where Identification signs use aluminum or other such metal, box construction, masonry or stone materials must represent more than fifty percent of the total area of the sign face. b. In the case of multiple tenants, all may be identified on the same sign, up to a maximum of three tenants. Where there are more than three tenants, the building should be identified with a name and the tenants listed on a Directory inside the Building. C. No sign shall exceed forty sq. ft. per face. It is the intention of the guidelines that sign sized be in aesthetic balance with the site and building sizes. The sign shall be placed no closer than twenty -five (25) feet and no further than thirty (30) feet from the street. e. The sign must be placed so it does no obscure any other identification, information, or vehicular control signs. Building mounted identification signs must be specifically approved by the Committee. 2. Temporary Signage: Temporary signs can be used for real estate sales or leasing, construction and design team information or future Occupant identification. Temporary signs, including real estate signage, must be approved by the Committee in writing. 3. Electronic and digital signage is not permitted in Blackthorn Corporate Park without specific approval of the Committee. CONSTRUCTION PHASE The purpose of the Construction Phase Guidelines is to minimize the adverse impacts of construction on the site's natural systems and other related activities: Prior to starting construction of each major project phase, a pre- construction conference with the Committee shall be conducted by the Applicant. The Applicant shall arrange for representatives of the following organizations to attend the conference: Blackthorn Corporate Park — Development Guidelines 2123112 draft