Laserfiche WebLink
FiHe d �ri by W A Jw�es <br />lights, one per side. The sealed lighting system shall be boxed <br />into the rear corner posts, not to exceed a total box width of 99". <br />All light wiring shall be in sealed tubing. All lights shall be <br />standard 3 pin plug in style. There shall be a set of LED amber <br />strobe lights mounted in weather protected boxes mounted <br />under the cab shield facing forward. There shall be a second set <br />of LED strobes mounted under the cab shield facing on both <br />sides of body. Lights shall be installed in approved manor by the <br />City. There shall also be an underbody plow light that will <br />direct light on the underbody plow and a spreader light <br />positioned at the left rear lower corner of the bed. <br />Rear Pintle Wallace Forge 2044101, 50,000 lb or equal, mounted rear of 8/NO <br />Hitch: truck, center of hitch 25 1/2" from ground and center of truck. <br />Capacity: 6,000 lbs, maximum vertical load YES NO <br />50,000 lbs. maximum gross trailer load <br />Drawbar eye dimensions: 2" to 3" ID 1 1/4" to 15/8" diameter <br />section. <br />7 <br />Note: Vendor will check with Central Services on exact location of CNO <br />hitch and exact location of all rear mounted lights, <br />Minimum Specifications For A Close Center Load Sensing Hydraulic System <br />Hydraulic The hydraulic pump shall be US manufactured axial piston OES/NO <br />Pump: pressure and flow compensated load sensing type. The pump <br />shall be cast iron construction and rated to 4.00 cubic inches per <br />revolution at maximum stroke. The pump shall have a two inch <br />suction line. The pump shall be rated for up to 3000 rpm and <br />pressure. The pump shall have a 1 1/4" keyed drive shaft and <br />SAE type C mounting flange. The pump shall be model PAVC <br />65 Parker load sensing pump or equal. A 1 " steel ball valve shall <br />be at the outlet of the pump. <br />Hydraulic Pump The hydraulic purnp will be a cast iron, variable <br />displacement piston pwnp with load sensing control. Pump to feature <br />internal bleed down compensator and separate adjustments for stand by <br />and main pressure. Purnp shall be Sauer Danf-oss FRL series pump or prior <br />approved equal. Pump capacity 90CC, <br />18 <br />