My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Opening of Bids - Spec S - One or More 2018 or Newer Emergency Medical Vehicle - Fire Service Inc - Part 1
sbend
>
Public
>
Public Works
>
Board of Works Documents
>
2018
>
Opening of Bids
>
Opening of Bids - Spec S - One or More 2018 or Newer Emergency Medical Vehicle - Fire Service Inc - Part 1
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
4/10/2025 11:51:13 AM
Creation date
8/30/2018 9:12:56 AM
Metadata
Fields
Template:
Board of Public Works
Document Type
Projects
Document Date
8/28/2018
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
147
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
10083-0016 <br />CITY OF SOUTH BEND <br />Switch, Momentary, Rocker, (1) <br />ADDITIONAL SWITCHES <br />A momentary rocker switch shall be located in the front control panel and shall <br />activate tie White Light Cut -Off circuit. <br />Alarm, Back-Un, Auto Reset, Std Model only <br />BACKUPALARM <br />A backup alarm with a cutoff switch shall activate when the vehicle is shifted into <br />reverse. The alarm shall automatically be reset and engage when the vehicle is <br />placed in reverse again. The device must meet OSHA and SAE J994 <br />requirements, and shall be rated (SAE) for Type C or B. <br />VEHICLE EXTERIOR LIGHTING <br />VEHICLE EXTERIOR LIGHTING REQUIREMENTS <br />The basic exterior ambulance lighting shall comply with FMVSS standard <br />number 108 and the requirement herein and include: <br />1. Amber front, rear directional signals, red brake and hazard warning <br />lights. <br />2. Front and rear side marker lights. <br />3. Back up light(s). <br />4. Loading lights. <br />5. Clearance lights <br />6. Ambulance emergency lights. <br />7. Flood lights. <br />8. Spotlight(s) <br />Note: This agency is concerned for the safety of the patients, crew, and the public <br />sharing the roadways. Therefore, this agency requires the primary manufacturer <br />incorporate recessed DOT marker lights at the highest point of the vehicle. The <br />marker lights shall be visible 360 degrees. In addition each comer marker light <br />shall be visible 180 degrees, also at each comer the marker light lens cover shall <br />be tilted -upward on a 45 degree angle be visible above the horizontal plane for <br />360 degrees, These measures will insure the vehicle will be visible in low light <br />conditions with the headlights in the "on" position. Bolt on upper clearance <br />lights or clearance lights within the support side extrusions will not be <br />acceptable. The rear side marker light shall be a minimum of two inches in <br />diameter and shall function as a turn signal indicator as described in KKK - <br />A1822 - E. <br />08/27118 <br />35 <br />
The URL can be used to link to this page
Your browser does not support the video tag.