Laserfiche WebLink
CITY OF SOUTH BEND <br />Reinforcement, Compartment Wall, For SCBA Bracket <br />COMPARTMENT WALL REINFORCEMENT <br />One (1) compartment wall(s) as specified by this Agency shall be reinforced with <br />1/4 inch flat bar for an SC13A bracket mounting. <br />Window,U P per, CS/Sl id e r. RrJF Ned, Priv Tint,PAN,Std Model oni <br />STEP WELL AND WINDOWS <br />The curb side door step well shall have a light recessed into wall one of the step <br />well. It shall be automatically lit when the side and rear doors are opened. The <br />light shall be activated by a switch. The step well shall be finished with a polished <br />aluminum diamond plate. There shall be a window in each of the three patient <br />access doors. The window frame shall be of an extruded aluminum design with a <br />protective anodized finish. The curbside entry door window shall include a <br />sliding window to allow for fresh air when needed. The two rear door windows <br />shall have fixed glass. The glass shall have a privacy tint. <br />The curbside window shall have the following dimensions: 26 1/2 inches high <br />and 19 1/2 inches wide. The rear windows shall be 22 1/2 inches high and 13 1/2 <br />inches wide. <br />Window, Body side, Fixed, Priv tint <br />A Curbside window shall be installed in the wall above the swquad bench seating, privacy <br />tint, 12V x 18"H between the seat back cushions and 6-point harnesses. <br />Handles, Patient EntrV <br />, Trimark Black/Chrome "SafePass" STQ <br />PATIENT ENTRY DOOR LATCHES, HINGES AND HARDWARE <br />When the doors are opened, the hinges, latches and door checks shall not protrude <br />into the patient compartment. All patient doors shall employ the same type of <br />locking hardware. All door latches shall comply with FMVSS 206. The locking <br />devices shall be two stage rotary latches and shall be in accordance with FMVSS. <br />There shall be two door latches, one at the top and one at the bottom, controlled <br />by a single locking handles. The latches shall look into an adjustable Nader type <br />pin located in the door frame. The Nader will utilize a captive nut to provide <br />adjustment and replacement without loss of the nut plate. The door latching <br />mechanism shall have an upper and lower patented "Emergency Release Latch" <br />to allow egress from the vehicle if a system failure should occur. <br />The door handles shall be Trimark OEM style handle with a large enough space <br />for gloved hands to operate the handle. The door handles shall be free floating <br />with 1008 cold rolled steel mechanical components with Nitrotee treated wear <br />10083-0016 08/27/18 <br />18 <br />