Laserfiche WebLink
4. Temporary Signage: Temporary signs can <br />b. The correct size for identification signs <br />be used for construction and design team <br />is determined according to the size of <br />information or future Occupant <br />the site and building. This is <br />identification. All temporary signs shall <br />essentially and aesthetic judgement. <br />match the identification signage in all <br />Placement of the sign must respond <br />respects except materials. <br />to two factors: best position for <br />viewing from the roadway and best <br />Only one temporary sign is allowed per <br />visual relationship to the architecture <br />site. All temporary signs, including real <br />of the building. <br />estate signage must be approved by the <br />Committee in writing. <br />c. The final signage plan shall be <br />submitted to the Committee for <br />5. Procedures: The following are general <br />approval. <br />guidelines for the use of the Blackthorn <br />signage system. In every case, a site <br />analysis must be conducted when the <br />building has been designed. This analysis <br />is normally conducted with a landscape <br />CONSTRUCTION PHASE <br />architect. <br />The purpose of the Construction Phase Guidelines <br />a. Exterior pedestrian and vehicular <br />is to minimize the adverse impacts of construction <br />traffic flow must be analyzed to define <br />on the site's natural systems and other related <br />those points at which people make <br />activities: <br />decisions. Once the decision points <br />are defined, signage can be placed on <br />1. In order to minimize soil erosion by water <br />the site plan in its most effective <br />and wind, practical combinations of the following <br />location, according to the above <br />shall be used: <br />placement rules. <br />16 Blackthron Corporate Center - Development Guidelines 411193 <br />