Laserfiche WebLink
(B) Round,hexagon, and octagonal shapes shall only used only as <br /> accents. <br /> (C) Solid windowless walls are prohibited unless necessary to the <br /> function of the building. If such walls are necessary to the function <br /> of the building, they shall incorporate arches,piers, columns, <br /> murals,tasteful graphics,planters and/or other elements that <br /> reduce building scale and add visual interest. <br /> (D) Commercial or mixed-use buildings with ground-level retail or <br /> office space shall include clear glass windows to allow views into <br /> building interiors. Opaque or reflective glass is prohibited. <br /> (E) Storefront windows shall be constructed of painted or clad wood or <br /> metal and clear glass. <br /> (F) Solid metal security gates,metal roll-down windows, and link or <br /> grill security devices are prohibited. <br /> (7) Commercial/Mixed Use Building Materials <br /> (A) Unarticulated or finished concrete block and plywood are <br /> prohibited on commercial mixed-use building facades or on walls <br /> that are visible from streets, sidewalks and parking areas. <br /> (B) Stucco,metal, exterior insulation systems (EIFS),unfinished pre- <br /> cast concrete panels and cast-in-place concrete are prohibited as <br /> the primary material used on commercial mixed-use building <br /> facades or walls visible from streets, sidewalks and parking areas. <br /> Up to 10%of facades facing streets, sidewalks or parking areas can <br /> be comprised of one or a combination of these materials. <br /> (C) Decorative block, "renaissance stone," smooth/textured synthetic <br /> plaster and wood trim should may be used only for decorative <br /> accent purposes and shall be limited to 10%of facades facing <br /> streets, sidewalks or parking areas. <br /> (D) Roofs, if sloped, shall be clad in cedar shake wood, fiberglass, <br /> asphalt shingles, tile or real/synthetic slate and shall meet all <br /> standards required by the City building code. Standing seam <br /> finished metal roofing should be used for accent purposes only and <br /> shall be limited to 15%of the roof surface area. <br />