Laserfiche WebLink
functions. <br />Vendor to supply information describing all components of <br />the system including capacities. Any vendor bidding an <br />alternative power source should include a list of all <br />components, their function, periodic maintenance required, <br />and system advantages. <br />High Pressure <br />Hose to be Parker Parflex Predator S616/HPSH- 16. The jet <br />[YES/1qO <br />Jet Hose: <br />rodder will be 1" inner diameter with an operating pressure <br />of 2500 PST and burst pressure of 7500 PST; it will bear a blue <br />stripe to indicate its operating and burst pressures. The hose <br />will have a smooth interior bore created by the heat <br />annealing and mandrel manufacttuing process that is <br />wrapped with high tensile, braided cording, and additional <br />layered and molecularly bonded coating that is abrasion and <br />cut resistant. The hose will have a minimum 4" bend radius <br />and high kink resistance because of its fabrication, 600 feet <br />of hose to be included, along with 20 feet of leader hose. <br />Four jet nozzles will come furnished with the unit. A 15 <br />degree sand nozzle and a 30 degree sanitary nozzle shall be <br />furnished. These nozzles should both be equipped with <br />tungsten carbide orifices for added life. <br />15 degree sand 80 G.P.M. nozzle <br />15 degree penetrator 80 G.P.M. nozzle <br />30 degree sanitary 80 G.P.M. nozzle <br />"Duck Bill" culvert nozzle for 15" to 60" lines 80 G.P.M. <br />Two nozzle supports are to be furnished with unit. 1" <br />diameter narrow 12" and a one inch diameter wide 20". <br />Lights: <br />All lighting to be LED type. In addition to all lights <br />YES 0 <br />customarily provided with this type of equipment, strobe <br />lights are to be mounted, one on the rear of the debris body <br />and one on cab guard in front of debris body. An arrow is to <br />be mounted on the highest point possible on the rear debris <br />door. <br />Mirror mounted strobe lights and mid -body work lights to <br />be included. <br />Boom to be equipped with two spot lights for operation at <br />night. <br />A hand held spot light is to be provided powered by chassis, <br />Ver. 2 — March 2018 <br />