Laserfiche WebLink
QUOTE NAME <br />FOR BIDS DUE <br />SPECIFICATIONS <br />CITY OF SOUTH BEND <br />Beck's Lake: Overflow Valve Materials Procurement <br />April 24, 2018 <br />Pursuant to notices given, the undersigned offers quote(s) to the City of South Bend in accordance with the following <br />attachment(s) which specify the class or item number or description, quantity, unit, unit price. <br />SPECIFICATIONS FOR BECK'S LAKE OVERFLOW VALVE MATERIALS PROCUREMENT <br />April 13, 2018 <br />PART 1 — GENERAL <br />1.1 DESCRIPTION <br />A. Scope: <br />1. Supplier shall provide domestically produced materials. <br />1.2 REFERENCES <br />A. Standards referenced in this Section shall comply with current editions of the following: <br />1. City of South Bend Engineering and Construction Standards. <br />2. ANSI/AWWA C111, Rubber -Gasket Joints for Ductile Iron Pressure Pipe and Fittings. <br />1.3 SUBMITTALS <br />A. Action Submittals: Submit the following: <br />1. Product Data — Ductile Iron Wall Sleeve <br />a. Provide manufacturer and material product data. <br />b. Provide Shop Drawings and data for pipe, fittings, gaskets, appurtenances, linings, and coatings. <br />c. Provide surface preparation and application reports and procedures as required for lining and <br />coating of pipe and fittings. Ductile iron pipe and fitting manufacturer and manufacturer and <br />applicator of lining and coating, as specified, shall mutually determine recommended surface <br />preparation and application methods, and provide written verification of mutually selected method <br />in submittals. <br />d. Provide U.S. Steel and Foundry Products Certifications. <br />e. Provide certificates signed by the manufacturer of each product that product conforms to applicable <br />referenced standards and the procurement documents. <br />f. Submit results of specified shop tests for pipe, fittings, linings, and coatings. <br />2. Product Data — Flanged Check Valve <br />a. Provide manufacturer and material product data. <br />1.4 QUALITY ASSURANCE <br />A. Supplier shall be responsible for coordinating the procurement of the specified materials. <br />B. Supplier shall verify that the Ductile Iron Wall Sleeve and Flanged Check Valve flanges have drilled and <br />tapped holes with identical flange patterns for each flanged component. Compatibility and mating of the <br />flanges shall be verified by the supplier prior to delivery and demonstrated at the time of delivery to insure <br />proper fit can be obtained in the field upon installation. <br />C. Manufacturers: <br />1. Manufacturers shall have a minimum of five years' successful experience producing ductile iron pipe <br />and fittings and shall be able to show evidence of at least five installation in satisfactory operation in <br />the United States that are similar applications to the specified service. <br />2. Lining and coating products shall be manufactured by a firm with a minimum of five years successful <br />experience in protecting pipelines exposed to the specified service conditions, and shall be able to <br />show evidence of at least five installations in satisfactory operation in the United States that are similar <br />Version 10/18/2016 Page - 6 Public Works Quote <br />