Laserfiche WebLink
* Machine fault codes shall be accessible from LCD screen <br />* Optional extendible stick shall be field adjustable using common hand tools. <br />MINIMUM SERVICE FILL CAPACITIES <br />Standard front axle capacity (4WD) shall not be less than 2.9 gallons (11 Q, with planetary <br />capacity no less than 0.2 gallons (0.7L). <br />Standard high -ambient cooling system capacity shall not be less than 5.9 gallons (22.5 L). <br />* Standard fuel tank capacity shall not be less than 42 gallons (160 L) <br />* Standard hydraulic system capacity shall not be less than 25.1 gallons (95 L). <br />Standard transmission (2WD, Power Shuttle) capacity shall not be less then 4.0 gallons (15 <br />Q <br />Standard transmission (4WD, Power Shuttle) capacity shall not be less than 4.0 gallons (15 <br />L) <br />* Optional transmission (2WD, Autoshift) capacity shall not be less than 5.0 gallons (19 L) <br />OWNING AND OPERATING COSTS <br />Front axles shall have sealed king pin and center pendulum bearings. <br />* Driveshaft universal joints shall be maintenance free. <br />• Standard fill hydraulic oil must be Advanced HYDO 10 with up to 6000hr service interval in <br />typical applications. <br />• Load Sensing Variable Displacement pump shall be standard for optimized fuel efficiency <br />and performance. <br />• Front and Rear Axle Oil change shall have a 1000- hour change interval for lowering <br />operating maintenance cost <br />• Cooling System shall have a 12,000-hour change interval for lowering operating maintenance <br />cost <br />* Engine shall have a 500-hour oil change interval for lowering operating maintenance cost. <br />ADDITIONAL FEATURES <br />• Machine shall be equipped with an optional, on -board machine communication system, <br />recording and transmitting GPS, service hour reading, fuel tank reading and ignition status. <br />• Machine shall be equipped with an optional, on -board machine communication system, <br />recording and transmitting GPS, service hour reading, fuel tank reading and ignition status. <br />• Optional front fenders shall be available from the OEM, articulating with the tires for <br />maximum coverage. <br />• An optional protective shield shall be available from the OEM for flying object applications, <br />such as hammer use. <br />* Ride -Control shall be optional and will smooth the ride under all operating conditions. <br />Machine shall be equipped with an optional OEM anti -theft system, utilizing programmable <br />key identification. <br />