Opening of Bids - Spec AD - One or More 2017 or Newer Tandem Axle Multi-Use Dump Truck - Trans Chicago Truck Group

Home Browse Search

TYPE Ladder: D-Rings: Tarp Rods: Tarp: Shall have a mir one in center, or (minimum). Ho wire minimum). factory on box. frame. LED Jig] SHALL BE AS DESCRIPTION SPECIFIED (Circle One) of 80,000 to 1,000,000 pounds. The cylinder tubing shall be D.O.M. Tubing, drawn over a mandrel, and shall have tensile strength of 70,000 pounds. The tube shall have a surface harness of 80 Rockwell "B". The cylinder shall dismantle easily and overlap between stages for greater stability. The trunnion collar shall be oscillation Each rod or pin eye shall have a cerk. There shall be a fold up stainless ladder located at the driver side (9/ NO front corner of the body for easy entrance to the dump body. In addition there shall also be a welded stainless step type insert on the front driver's side on the inside of the body. Bed shall have 3 D-Rings on each side of bed to mount leaf box. YES NO The D rings shall be mounted in approved location and place as what the City currently has on their fleet trucks. There shall be 2" wide stainless grip strut walk rails located on the. 91NO sides of the body. Tarp rods shall be installed in approved location and place as what the City currently has on their fleet trucks. Tarp system should be of the same system that is presently used by YES / NO the City now and shall be installed in a like manor. System shall be a Pull Tarp system with parts that interchange with City's existing traps. Mounting of Dump,Body num of three (3) brackets (each side) - 2"x 4" flat iron minimum, at least one at rear; at front. Shall be welded at rear and bolted with three (3) 5/8" bolts per bracket ;t cylinder shall be hooked to central hydraulics with 3/4" high pressure hose (two Floor of body to be approximately 54" off ground +/- 2". All welding to be done at Cher welding to be certified. Two rear hooks shall be supplied and bolted to rear of 18