Opening of Bids - One (1) or More New Positive Displacement Hydro-Excavating Machine with Tandem Axle Cab & Chassis Spec U - Jack Doheny Companies, Inc.

Home Browse Search

shall be included. Drain to include 10 feet of 6 inch lay flat hose. Debris body shall be dumped by raising the body to a 60 degree angle utilizing a forward mounted, double acting hydraulic dump cylinder or equal. Debris body internal wash out system shall be included that operates directly from the high pressure water pump and is capable of full pump capacity. Wash out jets (6 minimum) shall be located in front upper part of debris body. The debris body shall be fixed on an independent frame, separate from the chassis frame and mounted via a 3 point mounting system to allow flexing to occur without causing frame damage. Dump controls and accessory controls shall be provided at a central curb side location directly behind the cab of truck for safety. The rear door shall include a reflective chevron for safety. Water Tanks: I Water tanks must have a minimum metered capacity of YES NO 650 gallon minimum. The water tank capacity shall be achieved via four separate cells, which must be constructed of a non- corrosive material, aluminum or stainless steel, painted due to water spotting, etc. The water cells shall not require internal coatings and shall be easily repaired or patched if required. The water tank shall not be a part of the debris hopper or tank. The four cells shall be hung via rubber line "J" straps which will allow cells to easily be removed from the unit if required. The water cells shall be located beginning directly behind the cab of the truck and ending at the very rear of the unit, thus providing the best possible weight distribution. The water tanks shall be adequately vented and connected to provide complete filling. A minimum 6" and 4" connection between tanks shall be provided. The water tanks shall be totally separate from and provide no structural support for the debris tanks. The 13