Laserfiche WebLink
Due to weld fume compositions and resultant build-up over time, it is recommended that duct and <br />overall system be routinely inspected and cleaned. Periodic inspection and cleaning of duct will <br />preserve effectiveness and life of weld fume extraction system, and help prevent any potential fire <br />hazards. <br />NOTE: When using weld fume extraction or Local Exhaust Ventilation (LEV) equipment, sparks from <br />welding, cutting or grinding processes can cause fire within the equipment. To minimize potential fire <br />operation, service and maintenance guidelines for fume extraction for LEV equipment should be <br />followed. <br />Improper maintenance of filter unit such as operation with fully saturated main filter over extended <br />period of time may reduce equipment life, filter efficiency, and increase chance of overheating blower <br />motor(s) and potential fire hazard. <br />The filter media is made of a cellulose material and is designed for dry air filtration. If the air and fume <br />extracted contains any type of oils, anti -spatter, tip -dip and/or moisture, this can affect filter and system <br />performance and life expectancy. It is recommended that routine system maintenance be performed at <br />one month intervals for robotic welding applications and three month intervals for semi -automatic <br />manual welding applications. For robotic welding application(s) with hood canopy fume extraction <br />system(s) design, this includes monthly inspection and cleaning of inner hood canopy, deflector plate <br />and hood outlet, extraction duct, preseparator, filter, fan housing, fan blade condition and filter surface <br />condition, recirculation duct and/or exhaust stack (if applicable). For semi -automatic welding <br />application(s) with multiple arm fume extraction system(s), this includes inspection and cleaning every <br />three months of extraction arm(s), extraction duct, preseparator, filter, fan housing, fan blade condition, <br />filter surface condition, recirculation duct and/or exhaust stack (if applicable). Based on the cleanliness <br />or condition of the system components (i.e. hood, arm, duct, filter, fan), the maintenance schedule may <br />have to be adjusted for shorter or longer intervals. <br />NOTE: If routine service and maintenance is not performed, applications and processes with oils, anti - <br />spatter, tip -dip and/or moisture may cause damage to system equipment and may void the equipment <br />and filter warranty. <br />Brake release <br />This robot's design, by Fanuc, includes capability of moving the robot axis without drive power. This <br />functionality requires a brake release or other provisions. Contact Lincoln Automation for pricing and <br />availability. <br />End -User Warranty Period* <br />LECO will assume parts expense of correcting defects during the full warranty period. All warranty <br />periods start from the date of purchase to the original end -user or from the date of manufacture if the <br />original invoice cannot be provided, and are as follows: <br />3 Years <br />- All welding machines, wire feeders and plasma cutting machines unless listed below <br />www.1incoJnelectric.com <br />gg zs Auton78tion <br />Solutions <br />