Laserfiche WebLink
(Jn e 4 <br />REGULAR MEETING <br />TUESDAY, JUNE 1, 1999 <br />the front facings and 1 snap and Velcro at the sleeve ends in place of the 5 snaps <br />at the front facings, and 2 snaps on cloth tabs at each sleeve end. (Does not meet <br />specification) Two snap fasteners (on a 1 inch, heat resistant cloth tab) shall be <br />attached on the right and left side seams near the bottom to engage the bottom of <br />the liner. (Excluded) does not meet specifications. <br />17.5 Hanger Loop: <br />6 ox. Nomex vs. Shell material <br />(Does not meet specifications) <br />17.10.1 Wristlet and sleeve well: <br />Total different system in construction (material and attachment) <br />(Does not meet specifications) <br />17.11 Front Closure Protective Overlap: <br />System supplied has a 4 inch opening in the circumference of a closed coat and <br />does not consist of specified shell, moisture barrier -and thermal liner material. <br />(Does not meet specifications) <br />17.12 Storm Flap: <br />The outside storm flap is constructed of a pile of outer shell material and a pile of <br />Nomex. <br />(Does not meet specifications) <br />17.13 Storm Flap and Jacket Closure system: <br />Hook and pile tape 1 'h in. <br />(Does not meet specifications) <br />17.14 Radio Pocket: <br />The oversized pocket furnished is a large for the radio, . giving the radio and <br />antenna and opportunity to get in the way of the firefighter. <br />17.16.1 Coat Trim: <br />The 3 inch strip above the elbow does not go completely around. <br />(Does not meet specifications) <br />17.17 Reflective lettering and numbering: <br />Scotchlite material #8987 not used and no explanation of what material type used. <br />(Does not meet specifications) <br />18.2 Moisture Barrier/Thermal Liner attachment: <br />Zipper vs. Snaps used to attach Thermal/Moisture barrier. <br />(Does not meet specifications) <br />18.3 Waistband: <br />One layer of black ripstop nomex and one layer of en -guard vs. outer shell <br />material and crosstech each suspender button shall be reinforced with a piece <br />of leather. Specific material was specified because of maintenance. <br />(Does not meet specifications) <br />18.4 Storm Fly/Closure: <br />The storm fly closure shall be outer shell material lined with crosstech and <br />thermal liner. Storm fly furnished is outer shell and nomex which does not <br />give equal thermal protection. <br />18.4.1 Dee Ring: <br />Not reinforced with leather. Leather added giving better strength and less <br />maintenance. <br />(Does not meet specifications) <br />