PSA - JPR - Geotechnical Survey & Design for Charles Black Center Renovations

Home Browse Search

This is EXHIBIT A, consisting of 8 pages, referred to in and part of the Agreement between Owner and Engineer for Professional Services dated Engineer's Services Article 1 of the Agreement is supplemented to include the following agreement of the parties. Engineer shall provide Basic and Additional Services, as set forth below. PART 1— BASIC SERVICES A1.01 Topographic Survey Activities: A. The project area is located within LaSalle Park and is bound by Washington Street to the South, and Falcon Street to the West. Any areas needing to be surveyed outside of the project limits shall be provided by the City of South Bend. B. JPR will provide the following information as it pertains to the survey tasks: • Establish both horizontal and vertical control throughout the project limits utilizing both GPS survey grade equipment as well as conventional survey equipment. • Request utility locates per the Indiana 811 Call Before You Dig call center. Please note that the utilities that will be marked by this company do not include any private utilities. Should private utilities exist within the project limits it may be necessary to contact a private utility locating company to have these lines marked in the field. Fees associated with a private utility locating company are not a part of this proposal. • Correspondence with utility companies to facilitate the locate process. This may include requesting record utility information so the location of the utilities may be graphically depicted on the drawings. • Collect the topographic information within the project limits, including but not limited to, sanitary and storm structures, edges of pavement and curb lines, building corners, observed utilities, trees and spot elevations • Collect invert information for the sanitary and storm structures within the project limits. • Perform research to acquire subdivision plats, prior surveys, and roadway plans. • Prepare a CAD drawing of the existing site conditions that will include a surface model with contours for design purposes. Limitations • Invert measurements made on storm and sanitary structures will be made from above ground only, utilizing methods that do not require confined space entry apparatus, such as ventilation and extraction equipment. • Utility lines will be shown based upon field evidence located during our field investigation and per plans and markings provided by the owner, utility companies, or their representatives. We cannot certify that all utilities required are available. Page 18 (Exhibit A — Engineer's Services) EJCDC E-500 Agreement Between Owner and Engineer for Professional Services Copyright © 2008 National Society of Professional Engineers for EJCDC. All rights reserved.