Laserfiche WebLink
BID PROPOSAL REQUIREMENTS AND CONFORMITY <br />2.0 Equipment (continued) <br />9 2 - Front end loaders with bucket and forks <br />• 2 - Rolloff container trucks <br />• 10 - 30 yd Rolloff containers <br />• 7 - 20 yd. Rolloff containers <br />• 14 Semi Tractors <br />• 30+ Semi Trailer (Lowboy, dovetail, flatbed, dry van, walking floor, water tanker) <br />* LCG Bed - Low Center of Gravity bed is 6" lower than industry standard rollback beds which allows us <br />to haul taller loads while staying within legal height as well as keeping the weight closer to the ground <br />for safer transport. This low -profile bed also gives us an <11 degree loading angle which allows us to <br />load vehicles with extreme low ground clearance without damaging the bumper, valance, and exhaust. <br />** Right Approach and Extreme Angle Bed - This bed is ultra specialized for the loading of vehicles <br />with extremely low ground clearance and exotic vehicles. The release handle allows the rear hinged <br />deck section to be lowered to a 6' load angle. A cable guide is inserted in the deck to keep the cable <br />low while winching the vehicle onto the rear deck. After the vehicle's front wheels are on the carrier, <br />the deck can be leveled out and the cable guide removed allowing the vehicle to overcome the second <br />clearance problem with the forward section of the deck. With the front wheels on the front section of <br />the deck the process can be repeated to eliminate clearance problems such as extreme low front and <br />rear bumpers as well as low exhausts or extended rear overhang. <br />Vehicle Equipment — the following is included in each company vehicle — list includes but is not <br />limited to: <br />■ A minimum of four LED flashing emergency lighting. <br />■ Debris removal equipment, consisting of: Two oversized containers, a broom, <br />shovel, fluid absorbent (oil -dry), safety chains, straps, and emergency beacons. <br />■ Company employees are provided with reflective uniforms, vests/jackets that <br />meet OSHA/ANSI-3 requirements. All employees are required to wear reflective <br />clothing when on scene and during the transport of removal vehicles. <br />■ Forward and rear facing dash cameras. <br />■ GPS tracking devices for more accurate dispatching and estimated times of arrival. <br />14 <br />