Opening of Bids - 6000 More or Less, Universal Nestable Refuse and Yard Waste Containers - Otto Environmental Systems

Home Browse Search

PAGE 3 of 6 PRODUCT SPECIFICATION © OTTO ENVIRONMENTAL SYSTEMS NORTH AMERICA, INC. to support the lifting platform under maximum load lifting forces. This upper pouch is reinforced with a pattern of eight (8) internal ribs. These ribs add strength and structure to the lifting pouch and front of the container. Otto containers are designed for nesting and easy stacking for shipment and storage. Stacking ribs are molded onto the exterior of the top rim to prevent containers from becoming wedged together during shipment. The weight of the container body is approximately 16.6 lbs. This weight does not include any other components. LID: The Otto MSD-45E container Lid is injection- molded from HDPE and is attached to the container body using two HDPE snap-lock hinge pins. The lid rotates freely about the hinge a full 270 degrees. The lid, when closed, rests on the top rim of the container body, providing a secure, tight fit around the entire perimeter between the lid and base. This prevents rain, insects and vermin from entering the container, as well as preventing the escape of most odors when the lid is closed. The lid is molded with a hand-hold lip that extends across the full width of the front of the lid, and wraps around both corners. This allows the lid to be easily opened from three sides without contact with refuse or residue. The Otto MSD-45E lid attachments are cylindrical-shaped and double-ribbed, creating an extremely robust attachment to the container body. The locking mechanism for the lid hinge pin, which is inserted into the attachments, is retained beneath a molded-in step feature within the lid. The minimum material thickness in the lid is 0.12". The weight of the lid is approximately 2.7 lbs. HINGE PIN: The Otto MSD-45E lid Hinge Pins are injection-molded from HDPE. The hinge pins secure the lid to the integrally molded lid hinge and handle detail. Two (2) hinge pins are used to secure the lid. The hinge pins are installed at the factory using a rubber mallet. At installation, the truncated conical center portion of the hinge pin compresses and snaps into the open slot in each side of the handle detail. This prevents vandalism and securely fastens the lid to the container base. The hinge pins can be removed with a special tool available from Otto.