Laserfiche WebLink
<br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />Lids: Containers are shipped with the lids completely attached and assembled. However when the <br />need to attach a lid does arise, it will be very easy to accomplish. To assemble the lid, place the lid <br />on top of the container, lining up the two (2) extended pieces of plastic from the lid into the handle <br />area. Then place the hinge pins into the side holes on each side of the handle area making sure <br />the hinge pins pass through the extended piece of plastic from the lid. Finally, push the hinge pins <br />into place using a fair amount of pressure with either your hand or rubber mallet. <br /> <br />Nestable Catch Bar: Carts are shipped with Nestable Catch Bar pre-installed. However when the <br />need arises, simply push metal bar to snap in. <br /> <br />Axle and Wheels: Our containers are shipped in stacks of (9) high with the bottom cart of each <br />stack fully assembled (lids, axles and wheels). All other containers have the axles and wheels with <br />integrated spacers conveniently placed in the bottom of each individual container. To assemble the <br />axle assembly, first slide the axle through all four holes in the axle housing until there is an equal <br />amount of axle space extending beyond the end of the axle housing. Finally, place the wheel onto <br />the axle until it “snaps” firmly into the groove on the axle. It’s that easy! <br /> <br />The average wheel assembly time utilizing our integrated spacer snap on wheel is 8 to 10 seconds! <br /> <br /> <br /> <br /> <br />© 2020 Rehrig Pacific Company <br />Assembly <br />Instructions