Laserfiche WebLink
The fuel system capacity shall be a minimum of 50 gallons and shall meet FMVSS <br />301 "Fuel System Integrity". <br />Y N <br />2_A TIRFR <br />The vehicle shall be equipped with seven (7) wheels and tires. The tires shall be <br />OEM supplied 245/70R19.5 12-ply load range F steel belted radials as specified in <br />chassis specification segment. <br />Y N <br />2.5 REAR AXLE <br />The rear axle shall be as specified in the chassis details of this specification. To <br />ensure patient comfort, assist with vehicle stability, and provide the required loading <br />height, a rear air suspension with a 12,000-pound capacity shall be used. This <br />system shall include a 5.3" ride height, an air reservoir, an engine -mounted <br />compressor, shock absorbers, and dump control. <br />Y N <br />2.5.1 ANTI -SWAY CONTROL <br />A Road Master Brand 1.50" diameter front and rear sway bar (or equal) shall be <br />provided to assist vehicle stability. This Road Master Brand sway bar shall be <br />engineered to improve handling characteristics by reducing the body roll and <br />balancing the weight transfer during cornering. <br />Y N <br />2.6 ELECTRIC THROTTLE <br />The OEM throttle device shall be preset to the proper RPM. Depressing the brake <br />pedal or shifting into gear shall deactivate it. <br />2.7 APPOINTMENTS <br />The manufacturer's heaviest duty heating and air conditioning package must be <br />used. The vehicle shall be equipped with dual electric multi-speed/delay windshield <br />wipers and washer mechanism. The seatbelt/shoulder harness mechanisms shall be <br />encased with a high impact plastic trim housing color keyed to match the driver's <br />compartment. The balance of the driver's compartment trim shall be accomplished <br />by the use of Formica, carpet, and cloth backed vinyl trim panels with 3/8" high - <br />density foam padding (having an R factor of 0.25). <br />Y xN <br />2.8 HEADLINER <br />The cab headliner shall be OEM standard automotive cloth. <br />Y1CN <br />2.9 BULKHEAD CAB <br />The bulkhead cab wall shall be the OEM wall, which matches the dash color <br />scheme. <br />YX N <br />2in SIGN <br />