Laserfiche WebLink
TRIUMPH COURT LIGHTING ADDITION <br />120-006E <br />Ins <br />ADDENDUM NO. 1 <br />Date: September 2, 2020 <br />To: All Plan Holders <br />From: Finnian Cavanaugh, Project Engineer <br />The following information is to be changed/added to the contract documents: <br />I. LIGHTING <br />A. Prevailing Specifications: INDOT807 <br />B. Additions: <br />I . Luminaries and Accessories <br />A. Light Pole: <br />1. Manufacturer: Sternberg or approved equal. <br />2. Pole, Type "A" catalog nuttiber 2600RFP5(Vernon)-16AG- <br />GFI-BK <br />3, Material: 20" x 30" high base shall be designed with a <br />cylindrically shaped lower section with gradually slopes to a <br />curved upper section and shall be made of heavy wall, 356 alloy <br />cast aluminum. It shall have a I" thick floor cast as an integral <br />part of the base, Straight fluted shaft shall be made of ASTM <br />6061 extruded aluminum and tempered to a T6 condition, The <br />shaft shall be externally welded circurnterentially to the base. <br />4. Section Shape: Straight flitted shaft with candy cane arm. <br />Candy cane arm shall be welded and parallel to straight fluted <br />shaft. <br />5. Height: Bottom of Lurninaire at 16', <br />6. Accessories: <br />a. Handhole: Secure with tamper -proof, stainless steel <br />hardware, <br />bo Anchor Bolts- Hot dipped galvanized "L" type. <br />C. Refer to pole detail sheet, see attached, for mounting <br />locations of bolt on breakaway banner anus, (WI weather- <br />proof receptacle and bolt on speaker hub, <br />d. Wind load for pole to be designed at 90 rnpli. <br />