Laserfiche WebLink
WOOD TILT PACS - ALL <br />TILT PAC FULL SCREEN MEASUREMENTS <br />9-s <br />MARVIN 0 <br />Windows and Doors <br />Made foryou: <br />Screen Opening -s► <br />Instructions: <br />To insure a proper screen fit, it is recommended to order a screen after the Tilt Pac installation. <br />Side Casing <br />1. To find the screen opening height: <br />Measure from the top casing to the edge of where the screen will rest at the sill, minus 3/32" (2) for the outside <br />measurement (OSM) of the screen height. <br />2. To find the screen opening width: <br />Measure from the inside edge of the side casing to theinside edge of the opposite side casing, minus 1/8" (3) for <br />the outside measurement (OSM) of the screen width,. . <br />NOTE: <br />Double Hung sash and screen are shown above. Instructions and measuring locations apply to Single Hung, Magnum <br />Double / Single Hung sash, and Magnum Historical sash. Screen measuring instructions also apply to Combination Storm <br />/ Screen measurements. Standard angle on combination bottom rails is 14 degrees, other angles must be specified. <br />+1'7103 25.6 <br />