Laserfiche WebLink
SHALL BE <br />TYPE DESCRIPTION SPECIFIEI <br />(Circle One) <br />additional electronic equipment under the clear cover. The cover will <br />include a side and bottom cable pass through access port and row of <br />attachment points to secure wiring or strain reliefs for cables exiting the <br />power distribution panel. <br />The preferred mounting location will be on the back of cab wall in a <br />location that offers ease of access for maintenance. <br />Warning lights, strobes, and plow lights each to be run off OEM <br />switches. <br />Lights to be installed in rear corner posts of body shall be four sets of 6" <br />oval LED lights with the following configuration per side. Top: 15t: LED <br />Amber Strobe 2nd: & 3rd LED Stop/ tail turn 4th shall be an LED reverse. <br />Minimum 12" excess wire on rear lights for ease of changing lights. <br />The body cab shield shall include Six (6) LED oval strobe lights <br />mounted in the front of cab shield facing forward and six (6) LED oval <br />strobe lights facing rearward built into the cab shield. Configuration of <br />the forward -facing lights shall be 1 st LED amber 2nd LED clear 3rd LED <br />amber 4th LED amber 5th LED clear 6th LED amber. <br />Configuration of the rear facing lights shall be 1 st LED amber 2nd LED <br />clear 3rd LED amber 4th LED amber 5th LED clear 6th LED amber. <br />One pair of LED amber oval strobe lights mounted on each side of front <br />corner of cab shield — lights shall be built into the cab shield facing <br />sideways. Cab shield light wires shall be run in solid steel tube for <br />protection on top of cab shield. <br />One pair of LED amber oval strobe lights mounted on each side of body <br />top rub rail. Lights shall be built into the factory body rub rail. <br />Also included will be a pair of Truck Lite LED Model #80880 or equal <br />heated plow lights mounted to stainless steel brackets on hood. Plow <br />lights to LED and integral to OEM headlights. <br />Spreader light: One LED flood light mounted on the rear of the dump <br />body. Location to be approved by Central Services. <br />There shall be one LED mounted spot light for the underbody mounted <br />on the passenger side. Location to be approved by Central Services. <br />16 <br />