Opening of Bids - Three Twenty at the Cascade Glazed Assemblies Project No 118-074A - Precision Wall Systems Inc

Home Browse Search

Specific Inclusions, Exclusions, Terms and Conditions General • Sales Tax is EXCLUDED. • Protection of our work (installed or stored) on site is EXCLUDED. • Final cleaning is included. • We have assumed embed layout is correct and embeds are sized appropriately, • We have assumed payment for stored materials, • We have assumed structure is capable of handling loads imposed by our systems. • We require minimum 15' clear access at perimeter of our work, • Glass breakage as a warranty itern is excluded. • If required, performance and payment bond is in effect for one (1) year from substantial completion, Section 084313 - Aluminum -Framed Storefronts • We have included approximately 2,250 SF of 2" x 4-1/2" thermally -broken aluminum storefront framing, • Manual aluminum entrance doors are included as standard (non -thermal) wide stile. • Finish for all aluminum framing and entrances under this section is painted in lieu of anodized. • Hardware for aluminum doors is included (von duprin panics, LCN 4040 closers, continuous hinges). • Glass for this section is included as specified. • Perimeter caulking of our work is included (2 lines). • We have included break metal sill flashing but not as shown in detail 2/A30'2. • Blocking and structural studs will be required (by others) at head of storefront for attachment. • Interface with EIFS and other substrates needs to be reviewed to insure continuity of weather barrier. Section 084413.10 -Glazed Aluminum Curtain Wall (Ribbon Window) • Approximately 17,700 SF of PWS 6525UW curtain wall is included as pail of this proposal. • We have included 20 thermal terrace doors for balconies. • Approximately 70 zero-sightline vents are included where noted in floor plans. • Finish for all training, doors and vents is painted (silver/gray color to mimic clear anodized). • Curtain wall framing members will be painted with an acrylic paint. • Exterior curtain wall components, terrace doors and vents will have kynar paint. • We have included a curtain wall approach in lieu of ribbon window approach. Framing will "fly" past slabs from level 2 through level 7. Top of slab anchors will be attached to existing embed anchors. Stool trim will be utilized to cover top of slab anchors. • An insulated metal panel will be used at slab -edge "spandrel" location to mirnic current design. • Fire-safing and insulation will be required and is included as part of this, proposal. • EIFS transitions will need to be addressed. • Vision glass is included. Specifications seem to be written backwards. Inboard lite should be clear. • We assume the embed layout correct and will perform a survey after award to confirm. If the embeds are not located correctly additional cost and time may be required to develop a solution. • We have included perimeter caulking (2 lines) of our work only. • Interface with EIFS and other substrates needs to be reviewed to insure continuity of weather barrier, • Detail I /A501 needs to be reviewed and corrected to create a continuous vapor barrier. Section 088000 - Glazing • We have included insulated glazing by a specified manufacturer, • Glass makeup in spec seems to be backwards. We assumed tinted lite should be outboard. • We have included black warm -edge spacers and argon fill. • Glass warranties are manufacturer standard. Proposed by - Jason Christy Accepted by - Mobile - 574.210.9'643 Page 2 of 2