Laserfiche WebLink
A <br />41 AXON Dock Individual Bay for Axon Flex 2 Systems Specifications <br />MODEL MODEL NO. COLOR <br />Axon Dock Individual Bay and Core' 11536 Black <br />1. Input power requirements:' <br />Voltage: 12-18 V DC <br />Current: up to 5 A DC <br />Power: 60 W minimum <br />Connector: Barrel power connector, inner diameter 0,08" <br />(2.1 mm), outer diameter 0.22" (5.5 mm), length 0.39" <br />(10 imm), inside positive <br />2. Output specifications per port: <br />Voltage; 4.5-5.5 V DC <br />Current: 500 rnA (camera), 700 mA (controller) <br />Power: 2.75 W (camera), 3.9 W (controller) <br />3, Operating temperature: -4 'F to 122 T (-20 'C to 50 'C) <br />4. Humidity: 85 percent non -condensing <br />5. One USIB-13 input port, 2 USIB-C dock output ports, 1 USB-A <br />2.0 output port <br />• Modular design capable of managing 1 Axon, Flex 2 camera <br />and 1 Axon Flex 2 controller .4 <br />• Status LED on the device docked in the bay indicates <br />device status, Status can also be observed through web - <br />based status screens. <br />• Provides power to Axon Flex 2 controller docked in the bay <br />to enable battery charging. <br />• Uploads fifes to Evidence.com services when used with the <br />Axon Dock core module. <br />DIMENSIONS rear side <br />Depth 1.98' (5 cm) <br />Width <br />H <br />Height (H) 2.4" (6.16cm) <br />Weight 0.32 pounds (143 grams) <br />. ...... . . ........ . W.-- ---- D <br />Axon Enterprise, Inc. reserves the right to change this specification without notice. <br />A, A AXON, Axon, Axon Dock, Axon Flex, Axon Rex 2, Axon Body, Axon Body 2, Axon Fteet, and Evidence,com are trademarks of Axon Enterprise, Inc,, some of <br />which are registered in the US and other countries. IFor more information, visit www.axon/com/LegaL. AIL rights reserved. (c) 2017 Axon Enterprise, Inc. <br />Rev:2.0 April 5,2017 <br />1. This document only describes the bay. For information about the core, see the Axon Dock Core Specifications. 1k <br />2. Product specification may change without notice; actual product may vary from picture. italk, <br />;? Required AC service specifications for provided external AC -DC power supply are 100-240 V AC, 1.6A min, 47-63 Hz, <br />4. This bay is designed to work with the Axon Flex 2 system. It will not work with the Axon Flex system or with Axon Body, <br />Axon Body 2, orAxon Fleet cameras. AXON <br />