Laserfiche WebLink
TYPE <br />Reservoir: <br />SHALL BE <br />AS <br />DESCRIPTION <br />SPECIFIED <br />(Circle One) <br />The hydraulic reservoir will have a minimum capacity of 35 gallons <br />YES NO <br />and be mounted on the chassis frame between the body and thee <br />chassis. The hydraulic tank shall be a minimum of 7 gauge and be <br />powder coated. The reservoir will include a sight/temp,gauge, a <br />suction strainer and a. magnetic drain plug. The reservoir top will <br />include a 90-gpm-cartridge style return filter with 10-micron <br />element and 25 psi bypass. One spare element to be furnished with <br />the truck at the time of delivery. <br />Reservoir shall have a float assembly wired to the console to notify <br />the operator of a low oil condition. <br />Reservoir shall include a tank magnet and drain plug. <br />Initial fill of AW-32 oil shall include antifoam and anti -wear <br />package. <br />The tank shall require no more than 13 inches in width and shall not <br />prevent the body from sitting a maximum of 16" from the back of <br />the chassis cab. <br />There shall be a clean out hole 7" x 6" located in bottom of hydraulic <br />tank. Hydraulic tank shall have shut off to allow service without <br />draining hydraulic tank. <br />There shall be an extra Hydraulic filter supplied with the unit. <br />Hydraulic Valve. The hydraulic valve will be a cast iron, sectional <br />type spool valve, Valve will feature individual section and flow <br />compensation for each section. The valve will be rated for a <br />nominal flow of 30 gpm. The load sensing shuttle network will be <br />accessible without valve disassembly. <br />Sections will be provided for following: <br />Dump hoist: double acting with down relief <br />Scraper: Dual Axis up- down right —left <br />Front plow double acting with reliefs <br />Front plow angle with reliefs. <br />22 <br />