Laserfiche WebLink
Med un by AA/ /\J",',nus SHALL BE <br />AS <br />TYPE DESCRIPTION SPECIFIED <br />(Circle One) <br />Valve Enclosure: The hydraulic valve will be mounted in a scaled <br />enclosure. The enclosure will feature an automotive type bulb seal <br />and a bolt on lid. Enclosure will be constructed of 304 stainless <br />steel and be 7 gauge in thickness. The hydraulic valve will mount <br />inside and be plumbed to the enclosure will steel tubing. <br />Connections on the front of the enclosure will be JIC bulkhead type. <br />A drain will be provided in the enclosure bottom and equipped with <br />a 5/8 nylon extension. <br />"W""""4", <br />Hydraulic Lines Stainless Hydraulic lines: There shall be stainless steel tubing YES , NO <br />& Plumbing: used to run the hydraulic lines from the rear of the bed to the front. <br />Tubing shall be SAE stainless with flared ends and hydraulic hose <br />used for short iumpers. Stainless lines shall be both to the rear <br />spreader and to the front for the plow operation. <br />The hydraulic system will be plumbed to SAE standards with no <br />black or iron pipe connections or components. National Pipe Thread <br />connections are allowed at the reservoir provided they are dry seal <br />type and sealed with liquid sealant. Pressure lines to be SAE 100- <br />Rl 6, Return lines to be SAEl 00-RI, Suction line to be SAEl 00-R4. <br />Front plow angle, auger and spinner couplers to be stainless steel <br />with dust covers. Coupler halves to be reversed for ease of book <br />up. Installation will include a full flow -32 ball valve in the suction <br />line and a - 16 high pressure steel ball valve in the pressure line to <br />shut off oil flow to the valves. <br />Stainless Hydraulic Couplers: There shall be stainless hydraulic <br />couplers used in regards to plow underbody dump bed etc. <br />Couplers to be poppet style and all stainless. Couplers to be <br />Safeway model 10 and include dust caps and plugs <br />Electronic The spreader control will utilize PWM technology to control the <br />Spreader variable feed and spread widths. The feed rate knob will <br />Control: accommodate 9 different settings while the spread width knob will <br />also accommodate 9 settings. The control head will have a power <br />switch with an indicator lamp to provide status, on the operation of <br />the controller. Unit to be mounted for safe use by driver. <br />Controller shall be Storm Guard Freedom 2 controller. <br />Spreader control shall have ability to be touch screen with USB data <br />23 <br />YES NO <br />