Industrial Discharge Permits - T K Finishing & Imagineering Finishing Technologies

Home Browse Search

FYI: Reminders regarding Imaginnering's draft permit: 1) Imagineering shall report flow daily. 2) Irnagineering's Authorized Representative shall sign all reports including but not limited to Periodic Compliance Reports (PCR), Slug Control Plans, Flow Measurement Plans, and corrective actions in response to permit violations. 3) Imagineering shall, within ninety (90) days of the effective date of this permit, submit an Accidental Discharge/Slug Control Plan, or report as to whether the exisiting plan is still being implemented. See Part III (E) (1). 4) Imagineering shall submit a Flow Measurement Plant (FMP) within 90 days of the issuance of this permit. The IMP shall describe, at a minimum, how the permittee will meaure and record water and wastewater flow in their facility. See Part III (H) (1). 5) When collecting composite samples, samples must be obtained over a 24 hour period or for the duration of discharge within the 24 hour sampling period including, if applicable, multiple batches. 6) Samples shall be obtained through a flow -proportional sampling technique. If Imagineering can demonstrate that time -proportional sampling is as representative as flow -proportional sampling, then a time -proportional sample may be collected. If Imagineering chooses to demonstrate that time -proportional sampling is accurate they must do so within 120 days of the effective date of this permit or they shall commence flow -proportional sampling at that time. Please see Part II(B)(1) of your wastewater discharge permit for details. 7) To be submitted with the PCR, the Certified Operator shall sign one of the following statements: "Pretreatment Standards and Requirements are being met on a consistent basis" or "Pretreatment Standards and Requirements are not being met on a consistent basis. Additional operation and/or additional pretreatment is required to meet the Pretreatment Standards and Requirements". 8) Only the Authorized Representative shall be required to sign the certification statement found in Part III (A)(4) of this draft permit. 9) Section Part IV (B) (15) has been added in order to clarify the requirements concerning the Authorized Representative. 10) For all after hours (4:00 PM) required oral notifications call: 574-277-8515 and dial zero (0) to reach an operator. See Part III (I) of your permit for details. Imagineering Finishing Technologies Industrial Wastewater Discharge Permit Page 2 of 25