Laserfiche WebLink
SHALL BE <br />AS <br />TYPE DESCRIPTION SPECIFIED <br />(Circle One) <br />spread patterns and is self -leveling at all dump -box angles. <br />-The unit shall be a self -center without the use of and stabilizer <br />anns. <br />-Quick disconnect mounting hardware is to be provided. Spreader <br />mount shall be pin on and interchange with the body stone apron. <br />Optional <br />There shall be an option shown on the bid for electric hydraulic <br />YES / NO <br />Electric <br />controls in lien of the cable mounted controls the optional item shall <br />Controls: <br />be in accordance with the following specifications: <br />Hoist, Scraper, <br />-The hoist and scraper functions will be controlled from the cab via <br />QDES/ NO <br />& Plow <br />four (2) separate proportional joystick assemblies. The hoist <br />Controls: <br />control will include a neutral loch. Controls to be mounted in a <br />floor mounted console that will include an ann rest and provision <br />for mounting the spreader control to. Control installation to include <br />indicator lights for body up, low oil. Control console to be a Storm <br />Guard Freedom series. <br />-The following series shall be followed as to functions of the <br />electric joystick controls: <br />Ist stick: Body up down; <br />2°d stick: Scraper dual axis up down right left swing; <br />-The control console shall incorporate both the below spreader <br />control and a light switch pack to operate all emergency light <br />functions, Twitches shall be backlit. <br />Spreader The spreader control will be provided by programmable <br />OE I NO <br />Control: microprocessor. The controller will include separate, rotary knobs <br />for adjusting the spinner and feeder motors, on screen indication of <br />rate settings, open loop automatic or manual operation, separate <br />push buttons for pause and blast and open loop Iiquid capability. <br />The spreader control will include a self -diagnostic capability that <br />will display on screen text messages if a fault or loss of accuracy is <br />detected. A USB 2.0 port will be included for data downloading <br />and the installation of software updates. Spreader (control to be a <br />Storm Guard Freedom series model 2.1. <br />Color: White Cab, Stainless Steel Dump Bed <br />CY #/ NO <br />25 <br />