Laserfiche WebLink
SHALL BE <br />AS <br />TYPE DESCRIPTION SPECIFIED <br />(Circle One) <br />Scraper: Dual Axis up- down right —left with a pause <br />function on the controller with cushion valves. <br />Hoist and scraper sections will include a manual handle <br />override. Spreader sections will include a push pin manual <br />override. <br />Spreader-Storrn Guard Freedom controller, YE NO <br />Control: -Spreader control shall have ability to be touch screen with usb data <br />download. <br />-TEP wiring harness. <br />-Screw on crap and plug set for motor sensor connection. <br />-Detailed operators manual. <br />-Calibration manual. <br />-Wiring diagrains, <br />-Spreader Control Harness System: <br />-Spreader control and the hydraulic valve shall be connected via <br />TPE harness system. <br />-System will include a diagnostic board with direct reading LED <br />circuit indication. <br />-Wiring system will exclude any infusion of direct application of <br />1000 PSI pressure wash spray. Connectors shall withstand 500 <br />hours of 35C salt spray. <br />-There shall be an extra Hydraulic filter supplied with the unit. <br />One. hour of operator's training shall be provided at the Parks <br />department. <br />-Spreader controller shall include a rarn mount for mounting the <br />spreader controller to the dash in an approved location by South <br />Bend Central Service Garage. <br />-System shall be protected by two (2) filters to prevent damage all <br />hydraulic lines are to be wrapped in a protective loom. <br />Stainless There shall be stainless hydraulic lines for both pressure and return YES ' NO <br />Hydraulic mounted under the body on the chassis frame. Hydraulic lines shall <br />Limes: be connected via shortjumper hoses. <br />Stainless There shall be stainless hydraulic couplers used in regards to YE S l NO <br />Hydraulic Underbody, spreader and dump bed etc. <br />Couplers: <br />Put <br />