PSA - JPR Corporation - Ravina Park Bowman Creek Restoration

Home Browse Search

This is EXHIBIT A, consisting of 7 pages, referred to in and part of the Agreement between Owner and Engineer for Professional Services dated , Engineer's Services PART 1— BASIC SERVICES The following Scope of Services is for the proposed streambank restoration activities in Ravina Park along Bowman Creek in South Bend, Indiana. Ravina Park is generally within the following roadway boundaries: Broadway Street to the North, Indiana Avenue to the south, High Street to the west, and Miami Street to the east. A1.02 Topographic Survey A. Topographic Survey Activities: The Engineer has reviewed the proposed concept drawing, aerial photographs as well as walked the site limits, to obtain a thorough understanding of the task at hand. The Engineer will provide the following information as it pertains to the survey tasks: I . Establish both horizontal and vertical control throughout the project limits utilizing both GPS survey grade equipment as well as conventional survey equipment. 2. Request utility locates per the Indiana 811 Call Before You Dig call center. Please note that the utilities that will be marked by this company do not include any private utilities. Should private utilities exist within the project limits it may be necessary to contact a private utility locating company to have these lines marked in the field. Fees associated with a private utility locating company are provided as an Allowance, as identified in Exhibit C. 3. Correspondence with utility companies to facilitate the locate process. This may include requesting record utility information so the location of the utilities may be graphically depicted on the drawings. 4. Collect the topographic information within the project limits, including but not limited to, sanitary and storm structures, edges of pavement and curb lines, building corners, observed utilities, trees and spot elevations. S. Collect invert information for the sanitary and storm structures within the project limits. 6. Perform research to acquire subdivision plats, prior surveys, and roadway plans. 7. Prepare a CAD drawing of the existing site conditions that will include a surface model with contours for design purposes. 8. If required, the Engineer shall prepare a Location Control Route Survey for the roadways associated with this project. The Location Control Route Survey will be necessary to facilitate the right-of-way engineering phase, should any additional area be needed for right- of-way. B. Limitations 1. Invert measurements made on storm and sanitary structures will be made from above ground only, utilizing methods that do not require confined space entry apparatus, such as ventilation and extraction equipment. 2. Utility lines will be shown based upon field evidence located during our field investigation and per plans and markings provided by the owner, utility companies, or their representatives. We cannot certify that all utilities required are available. Page 1