Opening of Bids - One or More, 2017 or Newer Tub Grinder - Spec I - Vermeer of Indiana

Home Browse Search

Vermeer TG5000 Page 5 of 10 Tub is 60" (152.4 cm) deep and 146" (370.8 cm) across the lop opening to allow loading of large amounts of material. Bottom of the tub flares outward from tub wall, allowing the hammermilt to cut under the vertical wall of the tub, reducing bridging and allowing steady feeding of material. This highly effective placement of the mill reduces the amount of material buildup which may cause excess wear on the table and tub. The 6" (15.2 cm) cutting depth moans more aggressive hammermill cuts to help provide continuous grinding and a high rate of production, Four tub wall agitators move material to help reduce bridging and increase production. Tub rotation is driven by a low -speed, high -torque hydraulic motor and positive chain drive for greater durability. Vertical tub walls and flares are 114" (.6 cm) thick Tt steel. The tub floor is 3I8" (1 cm) thick T1 steel. The tub flares fold in for 150" (259 cm) transport width 99" (251.5 cm) tub at bottom flare and a 146" (370.8 cm) lop flare opening with a tub depth of 60" (152.4 ear). Hainr umill Box Open mill box design mounted to the frame located at the front of the tub. Screens are supported by integral ribs for less restriction. Mill box is removable or replaceable. 9.6" (24.9 cm) of clearance behind screen provides increased material flow through screens and reduced plugging. Undarmillieonyeyor. +; The continuous flow ronveycr system is designed to handle fluid material flow through transition area and less spillage. using this single -belt design eliminates the typical transition area between the loadout belt and undermill conveyor redudng the chances of material bridging. Discharge height capability of 14' (4.3 m). The single discharge also reduces the amount of spell underneath and at the rear transition area of the machine Single 36" (91 A cm) wide oontinuous discharge belt with V-cleat. Control Papal The control panel provides a display of the microprocessor and the CAT engine systems, providing the operator with real-time performance information. The control panel also provides full instrumentation and diagnostic ports for monitoring hydraulic systems and troubleshooting. The panel is located under the protective Falling Object Canopy, which helps protect operator from falling objects. Centralized controls are located near the front left side of the machine with operator protection from falling objects. Combination of displays and gauges and fault code, as well as multiple switch controls for all operations of the grinder. Cab Door interlock Salim - Switch Cab door must be closed and secure before loader boom and rotation is operational providing a safe area for operator in cab from thrown and falling objects. Interlock switch located on cab door disables loader rotation and knuckle boom functions when door is opened. �oystick�lctivateSutfon Enables controls to the joysticks. If the cab door is opened during operation, the joystick controls are nonoperational. Joystick activate button located on overhead control panel in the cab. https:Hapex,vermeer.com/apex/Pp=178:5:105800661199775 4/24/2017