|
ExxonMobil
<br />Linear Polyethylene
<br />HD-6605 Injection Molding Resin
<br />Description
<br />HD-6605 is a narrow molecular weight high
<br />density copolymer polyethylene designed for
<br />superior impact and environmental stress crack
<br />resistance properties. This resin is ideal for heavy
<br />duty applications exposed to tough handling at
<br />ambient and low temperatures. Long-term UV
<br />stabilization is available for this grade.
<br />E*onMobil
<br />Chemical
<br />Typical Applications
<br />• Waste management carts
<br />• Industrial components
<br />• Recreational products
<br />• Large part durables
<br />Resin Properties
<br />Test Based Ono
<br />Unit
<br />Typical Value'
<br />Melt Index
<br />ASTM D-1238
<br />g/10 min.
<br />5
<br />Density
<br />ASTM D-4883
<br />g/cm3
<br />0.948
<br />Melting Point
<br />Exxon Mobil Method
<br />°c
<br />130
<br />Molded Properties'
<br />Yield Tensile Strength'
<br />ASTM D-638
<br />MPa (psi)
<br />22A (3200)
<br />Yield Elongation @ Yield
<br />ASTM D-638
<br />%
<br />19
<br />Flexural Modulus
<br />ASTM D-790
<br />MPa (psi)
<br />586 (85,000)
<br />Impact Strength
<br />Exxon Mobil Method
<br />N (Ibf)
<br />Max. Force @ 23eC
<br />2220 (500)
<br />@ - 40°C 3500 (785)
<br />Brittleness Temperature ASTM D-746 °C < -70
<br />Environmental Stress Crack ASTM D-1693 hr 17
<br />Resistance, Fso Condition B
<br />1. Values given above are typical and should not be used as specification limits.
<br />2. All physical properties were measured on injection molded specimens.
<br />3. Tensile testing was conducted at a crosshead speed of 500 mm/min. The tensile strength
<br />reported refers to the maximum load reached during the test
<br />4. ASTM test procedures may be modified to accommodate operating conditions or facility
<br />limitations -
<br />Food Packaging
<br />HD-6605 is an olefin copolymer which complies with FDA Regulations 21CFR 177.1520, (c) 3.1
<br />and 3.2 and may be used in articles which are intended to contact food at or below cooking
<br />temperatures. Health and Welfare Canada has no objection to the use of this resin in food
<br />packaging. Contact your ExxonMobil representative to review specific applications.
<br />AMEWCAS-9R9
<br />43Wa EeaonModl. Th. uw may luxard, rWr lalb 1, arson pholods, IMs coyyiryhted darbal ut .1, if unWered and c.,let., irunding ep of it. headers, foam.
<br />dntloimen, sad Whet Information. You may not mpy pee Jau,ment to a W. ere, &xwlMobll does nIX W.,a.,. IM lypcal (or abler) ¢dude, Fnalysie may be pedurmad on
<br />mproaentaMe ampled and not the ¢Neal pro., slapped The irdamans n the dowmalf status only to the named prod¢t or ma eriuls dMen not in eombinafimt MM1 any
<br />other Ind' s or matetiah. We Lewd The etbrmatun on dot. bMMM to be holders on the date comgled, but we W not taptawX, baulent or otnnMea 9ua anNe, eYp .sal, or
<br />in ioiod'. Ibe mmd-u.bWry, filnex for . pmticular alarne sitsbilily, az acy, reliability or umpletanam of Ida Information or the prWncta, nmtenele or procesrss
<br />dea b,, Tire ctet e finer n o, ropmmide on all datermhuticm r,a en, dry ,za of m.fnlal or au tub and a., psuseac in ihe trahodas d into, eat We expessly dl teem
<br />Rebid, for any low, damage. or in,y dtetly or Ind,oc9y ¢uttered or Inuarso as a moult of or leased to anyone users, m nap, on any of the afwma4on in the domment
<br />There is no wan.ft a,b run Potanl inhln9emrvN, nor a,ry enoduarl. l of any prWUG or pramw, and we mrpready ,fistffin any coolish, Impl rnuden The lens, W,'cur',
<br />-EaxonMOLN Chemicel', or 'EararMaril' ore used far aomeni s... and are,inuoda any arse or niae of Eamlater. Charrvcro al C.,,on,, Exn Metal , l Consulter, or mV
<br />afrades they directly or aniontly oMvtd The Exuadlobil Chemical Emblemand is'Intadoobnata' 9eoibe am tradema4.1 basso MCLil¢donation.
<br />
|