Laserfiche WebLink
Four Winds Stadium <br />Scope of work: continued <br />Condensing units <br />1. Check condenser coil for cleanliness. <br />2. Check refrigerant charge. <br />3. Perform refrigerant leak test. <br />4. Check crankcase heater. <br />5. Check compressor amp draw. <br />6. Check condenser motor amp draw and operation. <br />7. Check electrical connections. <br />8. Check condenser fan blades. <br />Air handlers <br />1. Provide and replace blower drive belt once per year. <br />2. Inspect bearings and lubricate same if applicable. <br />3. Clean condensate drain pan and trap. <br />4. Check and lubricate damper linkages. <br />5. Check coils for cleanliness. <br />• Make up air units <br />1. Clean burner. <br />2. Test burner combustion and provide a report. <br />3. Check operation of burner operating and safety controls. <br />4. Check gas pressure. <br />5. Replace blower drive belt once per year. <br />• Boiler <br />1. Clean burner. <br />2. Check burner combustion and provide a report. <br />3. Check operating and safety control operation. <br />4. Check operation of pressure temperature relief valve. <br />5. Check operation of the water pressure reducing valve. <br />6. Check and record boiler operating pressure. <br />7. Check gas pressure. <br />