HomeMy WebLinkAboutOpening of Bids - Water Treatment Chemicals 2021-2022 - Alexander Chemical CorporationACKNOWLEDGEMENT BY SURETY
STATE OF ILLINOIS
COUNTY OF COOK
On this 6th day of April, 2021, before me, Bartlomiej Siepierski, a Notary
Public, within and for said County and State, personally appeared Aerie
Walton to me personally known to be the Attorney -in -Fact of and for Harco
National Insurance Company and acknowledged that s/he executed the said
instrument as the free act and deed of said Company.
IN WITNESS WHEREOF, I have hereunto set my hand and affixed my
official seal, at my office in the aforesaid County, the day and year in this
certificate first above written.
4C
Public in the State of Illinois
of Cook
OFFICIAL SEAL
BARTIDIVIM SIEPIERSIU
NOTARY PUBLIC, STATE OF ILUNOIS
COOK COUNTY
MY COMMISSION EXPIRES 0911WM1
NOTICE TO BIDDERS
Notice is hereby given that the City of South Bend, Indiana, Board of Public Works will receive
sealed electronic Responses at bpwbidsAsouthbendin.noy until 9:00 a.m., EST, on April 13, 2021
for the following:
Water Treatment Chemicals 2021-2022
Specifications are available for download by visiting the City of South Bend's web page at
www.southbendin. ov:
X Click on "I'm Looking For"
X Click on "Doing Business in South Bend"
X Click on "City Contracts — Invitations to Bid"
X Click on the "Required Link" to register your company. You must register to receive
addenda and updates to the specific bid you are interested in. Failure to do so
could render your bid non -responsive to the specifications.
There is no charge for the specifications. The specifications are also available for review only during
regular working hours in the Department of Public Works, Ste. 1316, County -City Building, 227 W.
Jefferson Blvd., South Bend, Indiana 46601.
Bids received after 9:OOAM, Local Time, on April 13, 2021, will be returned unopened.
Bids must be on the City of South Bend Bid/Proposal form provided, which includes a Non -Debarment
Affidavit, Non -Discrimination Commitment form, and a Non -Collusion Affidavit Form. Certified Check or Bid
Bond in the amount of not less than 10% must be submitted with the bid. A refund of the bid security will
be issued upon satisfaction of Bid Award.
The Board reserves the right to reject any or all bids or to accept a full or partial award of the bid or bids
which, in its judgment, will be to the best interests of the City of South Bend. If the Board elects to award
the base bid plus an alternate(s), the Board will look at the totality of the cost when determining the
lowest, most responsible bid.
The Board may reject any bid that does not conform to these requirements as non -responsive.
The Board reserves the right to reject any or all bids or to accept a full or partial award of the bid or bids
which, in its judgment, will be to the best interest of the City of South Bend.
BOARD OF PUBLIC WORKS
Anne Fuchs, Clerk
Publish two times:
March 29, 2021
April 5, 2021
0712412018
tip1i71t g ,: .
CITY OF SOUTH BEND, INDIANA
SELLER'S BID FOR SALE OR LEASE OF MATERIALS
BID NAME Water Treatment Chemicals 2021-2022
FOR BIDS DUE April 13, 2021; 9:00 AM, Local Time
Date: April 9, 2021
Address: 7593 S First Road
City/State/Zip: LaPorte, IN 46350
Agent of Bidder (if Applicable):
Bidder
(Firm): Alexander Chemical Corporation
Telephone Number: 800 348-8827
When the prospective Contractor is unable to certify to any of the statements below, it shall attach an explanation to this Affidavit.
CONTRACTOR'S NON -COLLUSION AND NON -DEBARMENT AFFIDAVIT,
CERTIFICATION REGARDING INVESTMENT WITH IRAN, EMPLOYMENT
ELIGIBILITY VERIFICATION, NON-DISCRIMINATION COMMITMENT AND
CERTIFICATION OF USE OF UNITED STATES STEEL PRODUCTS OR FOUNDRY
PRODUCTS
(Must be completed for all quotes and bids. Please type or print)
STATE OF INDIANA )
)SS-,
LAPORTE COUNTY )
The undersigned Contractor, being duly sworn upon his/her/its oath, affirms under the penalties of perjury
that:
1. Contractor has not, nor has any other member, representative, or agent of the firm,
company, corporation or partnership represented by him, entered into any combination,
collusion or agreement with any person relative to the price to be bid by anyone at such
letting nor to prevent any person from bidding nor to induce anyone to refrain from
bidding, and that this bid is made without reference to any other bid and without any
agreement, understanding or combination with any other person in reference to such
bidding. Contractor further says that no person or persons, firms, or corporation has, have
or will receive directly or indirectly, any rebate, fee, gift, commission or thing of value on
account of such sale; and
2. Contractor certifies by submission of this proposal that neither contractor nor any
of its principals are presently debarred, suspended, proposed for debarment, declared
ineligible, or voluntarily excluded from participation in this transaction by any Federal
department or agency; and
3. Contractor has not, nor has any successor to, nor an affiliate of, Contractor, engaged in
investment activities in Iran.
a. For purposes of this Certification, "Iran" means the government of Iran and any agency
or instrumentality of Iran, or as otherwise defined at Ind. Code § 5-22-16.5-5, as
amended from time -to -time.
b. As provided by Ind. Code § 5-22-16.5-8, as amended from time -to -time, a Contractor
is engaged in investment activities in Iran if either:
i. Contractor, its successor or its affiliate, provides goods or services of twenty
million dollars ($20,000,000) or more in value in the energy sector of Iran;
or
Contractor, its successor or its affiliate, is a financial institution that extends
twenty million dollars ($20,000,000) or more in credit to another person for
forty-five (45) days or more, if that person will (i) use the credit to provides
goods and services in the energy sector in Iran; and (ii) at the time the
financial institution extends credit, is a person identified on list published by
the Indiana Department of Administration.
4. Contractor does not knowingly employ or contract with an unauthorized alien, nor
retain any employee or contract with a person that the Contractor subsequently learns is an
unauthorized alien. Contractor agrees that he/she/it shall enroll in and verify the work
eligibility status of all of Contractor's newly hired employees through the E-Verify
Program as defined by I.C. 22-5-1.7-3. Contractor's documentation of enrollment and
participation in the E-Verify Program is included and attached as part of this bid/quote;
and
5. Contractor shall require his/her/its subcontractors performing work under this
public contract to certify that the subcontractors do not knowingly employ or contract with
an unauthorized alien, nor retain any employee or contract with a person that the
subcontractor subsequently learns is an unauthorized alien, and that the subcontractor has
enrolled in and is participating in the E-Verify Program. The Contractor agrees to maintain
this certification throughout the term of the contract with the City of South Bend, and
understands that the City may terminate the contract for default if the Contractor fails to
cure a breach of this provision no later than thirty (30) days after being notified by the
City.
6. Persons, partnerships, corporations, associations, or joint venturers awarded a
contract by the City of South Bend through its agencies, boards, or commissions shall not
discriminate against any employee or applicant for employment in the performance of a
City contract with respect to hire, tenure, terms, conditions, or privileges of employment,
or any matter directly or indirectly related to employment because of race, sex, religion,
color, national origin, ancestry, age, gender expression, gender identity, sexual orientation
or disability that does not affect that person's ability to perform the work.
In awarding contracts for the purchase of work, labor, services, supplies, equipment,
materials, or any combination of the foregoing including, but not limited to, public works
contracts awarded under public bidding laws or other contracts in which public bids are
not required by law, the City, its agencies, boards, or commissions may consider the
Contractor's good faith efforts to obtain participation by those Contractors certified by the
State of Indiana as a Minority Business ("MBE") or as a Women's Business Enterprise
("WBE") as a factor in determining the lowest, responsible, responsive bidder.
In no event shall persons or entities seeking the award of a City contract be required to
award a subcontract to an MBE/WBE; however, it may not unlawfully discriminate against
said WBE/MBE. A finding of a discriminatory practice by the City's MBE/WBE
Utilization Board shall prohibit that person or entity from being awarded a City contract
for a period of one (1) year from the date of such determination, and such determination
may also be grounds for terminating the contact for which the discriminatory practice or
noncompliance pertains.
7. The undersigned contractor agrees that the following nondiscrimination
commitment shall be made a part of any contract which it may henceforth enter into with
the City of South Bend, Indiana or any of its agencies, boards or commissions.
Contractor agrees not to discriminate against or intimidate any employee or applicant for
employment in the performance of this contract with privileges of employment, or any
matter directly or indirectly related to employment, because of race, religion, color, sex,
gender expression, gender identity, sexual orientation, handicap, national origin or
ancestry. Breach of this provision may be regarded as material breach of contract.
I, the undersigned bidder or agent as contractor on a public works project, understand my
statutory obligations to the use of steel products or foundry products made in the United
States (I.C. 5-16-8-1). I hereby certify that I and all subcontractors employed by me for
this project will use steel products or foundry products made in the United States on this
project if awarded. I understand I have an affirmative duty to notify the City in my bid that
my proposal does not include the use of steel products or foundry products made in the
United States. I understand it is my sole obligation and responsibility to provide a
justification to the City, subject to review and approval, why the cost of United States made
steel or foundry products is unreasonable. Prior to award and upon submission of bid
which does not use steel products or foundry products made in the United States, the City,
through its director of public works, shall make a determination if the price of United States
made steel or foundry is unreasonable. I understand that violations hereunder may result
in forfeiture of contractual payments.
I hereby affirm under the penalties of perjury that the facts and information contained in the foregoing bid
for public works are true and correct.
Dated this 9th _ day of April , 2021
Subscribed and sworn to before me this _
My Commission Expires C5 S
County of Residence
Alexander Chemical Corporation
Contractor/ - er (Firm)
Signature of Contractor/Bidder or Its Agent
Robert Davidson, President
Printed Name and Title
9th day of April , 2021
18A 0 L(e� CAN
Not ry Public
AIA Document A310T"" -2010
CONTRACTOR: SURETY:
(Maine, legal status and address) (Vanre, legal stalrrs and principal place
ALEXANDER CHEMICAL CORPORATION ofbusine,ss)
7593 S. First Road
Kingsbury, IN 46345 HARCO NATIONAL INSURANCE COMPANY
King702 Oberlin Road This document has important legal
Raleigh, NC 27605 consequences. Consultation with
OWNER: an attorney is encouraged with
(Name, legal stales and address) respect to its completion or
CITY OF SOUTH BEND modification.
1316 County -City Building, 227 West Jefferson Boulevard, South Bend, IN 46601 Any singular reference to
Contractor, Surety, Owner or
BOND AMOUNT: Ten Percent of Amount bid other party shall be considered
(10% of Amount Bid) plural where applicable.
PROJECT:
(Afame, location or address, and Project number, if anv)
Supply and Deliver Water Treatment Chemicals for 2021-2022 Project Number, if any:
The Contractor and Surely are bound to the Owner in the amount set forth above, for the payment of which the
Contractor and Surety bind themselves, their heirs, executors, administrators, successors and assigns, jointly and
severally, as provided herein. The conditions of this Bond are such that if the Owner accepts the bid of the Contractor
within the time specified in (lie bid documents, or within such time period as may be agreed to by the Owner and
Contractor, and the Contractor either (1) enters into a contract with the Owner in accordance with the terms of such
bid. and gives such bond or bonds as may be specified in the bidding or Contract Documents, with a surely, adnutted
in the jurisdiction of the Project and otherwise acceptable to the Owner, for the faithful performance of such Contract
and for the prompt payment of labor and material furnished in the prosecution thereof, or (2) pays to the Owner the
difference. not to exceed the amount of this Bond, between the amount specified in said bid and such larger amount
for which the Owner may in good faith contract with another party to perform (he work covered by said bid, then this
obligation shall be null and void, otherwise to remain in full force and effect. The Surely hereby waives any notice of
an agreement between the Owner and Contractor to extend the time in which the Owner may accept the bid. Waiver of
notice by the Surety shall not apply to any extension exceeding sixty (60) days in (lie aggregate beyond the time for
acceptance of bids specified in the bid documents, and the Owner and Contractor shall obtain the Surety's consent for
an extension beyond sixty (60) days.
if this Bond is issued in connection with a subconlractor's bid to a Contractor, the tern Contractor in this Bond shall
be deemed to be Subcontractor and the term Owner shall be deemed to be Contractor.
When this Bond has been furnished to comply with a statutory or other legal requirement in the location of the Project.
any provision in this Bond conflicting with said statutory or legal requirement shall be deemed deleted licrefrom and
provisions confomung to such statutory or other legal requirement shall be deemed incorporated herein. When so
furnished. the intent is that this Bond shall be construed as a statutory bond and not as a common law bond -
Si d and sealed this 6th day of April, 2021
(lI ress)
(11'itnc.ssi
Paul Allen
ALEXANDER CHEMICAL CQRPORATION
(Title) Rfbert Davidson, President
HARCO NATIONAL INSURANCE COMPANY
[�Srq•er t meal)
. e Aerie Walton, Attorney in Fact
AIA Document A3101"' — 2010. Copyright 0 1963, 1970 and 2010 by The American Institute of Architects. All rights reserved.
POWER OF ATTORNEY Bond # N/A
HARCO NATIONAL INSURANCE COMPANY
INTERNATIONAL FIDELITY INSURANCE COMPANY
Member companies of IAT Insurance Group, Headquartered: 702 Oberlin Road, Raleigh, North Carolina 27605
KNOW ALL MEN BY THESE PRESENTS: That HARCO NATIONAL INSURANCE COMPANY, a corporation organized and existing under the laws of
the State of Illinois, and INTERNATIONAL FIDELITY INSURANCE COMPANY, a corporation organized and existing under the laws of the State of New
Jersey, and having their principal offices located respectively in the cities of Rolling Meadows, Illinois and Newark, New Jersey, do hereby constitute and
appoint
CHRISTINA L. SANDOVAL, SANDRA M. NOWAK, JENNIFER L. JAKAITIS, SAMANTHA CHIERICI, KRISTIN L. HANNIGAN,
SANDRA M. WINSTED, MICHELLE D. KREBS, DIANE M. O'LEARY, JUDITH A. LUCKY-EFTIMOV, DEBRA J. DOYLE, SUSAN A. WELSH
Chicago, IL.
their true and lawful attorney(s)-in-fact to execute, seal and deliver for and on its behalf as surety, any and all bonds and undertakings, contracts of
indemnity and other writings obligatory in the nature thereof, which are or may be allowed, required or permitted by law, statute, rule, regulation, contract
or otherwise, and the execution of such instrument(s) in pursuance of these presents, shall be as binding upon the said HARCO NATIONAL
INSURANCE COMPANY and INTERNATIONAL FIDELITY INSURANCE COMPANY, as fully and amply, to all intents and purposes, as if the same had
been duly executed and acknowledged by their regularly elected officers at their principal offices.
This Power of Attorney is executed, and may be revoked, pursuant to and by authority of the By -Laws of HARCO NATIONAL INSURANCE COMPANY
and INTERNATIONAL FIDELITY INSURANCE COMPANY and is granted under and by authority of the following resolution adopted by the Board of
Directors of INTERNATIONAL FIDELITY INSURANCE COMPANY at a meeting duly held on the 13th day of December, 2018 and by the Board of
Directors of HARCO NATIONAL INSURANCE COMPANY at a meeting held on the 13th day of December, 2018.
"RESOLVED, that (1) the Chief Executive Officer, President, Executive Vice President, Senior Vice President, Vice President, or Secretary of the
Corporation shall have the power to appoint, and to revoke the appointments of, Attorneys -in -Fact or agents with power and authority as defined or limited
in their respective powers of attorney, and to execute on behalf of the Corporation and affix the Corporation's seal thereto, bonds, undertakings,
recognizances, contracts of indemnity and other written obligations in the nature thereof or related thereto; and (2) any such Officers of the Corporation
may appoint and revoke the appointments of joint -control custodians, agents for acceptance of process, and Attorneys -in -fact with authority to execute
waivers and consents on behalf of the Corporation; and (3) the signature of any such Officer of the Corporation and the Corporation's seal may be affixed
by facsimile to any power of attorney or certification given for the execution of any bond, undertaking, recognizance, contract of indemnity or other written
obligation in the nature thereof or related thereto, such signature and seals when so used whether heretofore or hereafter, being hereby adopted by the
Corporation as the original signature of such officer and the original seal of the Corporation, to be valid and binding upon the Corporation with the same
force and effect as though manually affixed."
IN WITNESS WHEREOF, HARCO NATIONAL INSURANCE COMPANY and INTERNATIONAL
FIDELITY INSURANCE COMPANY have each executed and attested these presents
on this 31 st day of December, 2019
STATE OF NEW JERSEY STATE OF ILLINOIS ;Y'v�lVSG9q
Count of Essex = p
��„ y County of Cook �or$•.cp :•
SfUll n
SEAL on
=0% 1994 : &:
y�ER� Kenneth Chapman 0b�f' o
d�lyl + lti� Executive Vice President, Harco National Insurance Company •' * }�•
and International Fidelity Insurance Company
On this 31 st day of December, 2019 , before me came the individual who executed the preceding instrument, to me personally known, and,
being by me duly sworn, said he is the therein described and authorized officer of HARCO NATIONAL INSURANCE COMPANY and
INTERNATIONAL FIDELITY INSURANCE COMPANY; that the seals affixed to said instrument are the Corporate Seals of said Companies; that the
said Corporate Seals and his signature were duly affixed by order of the Boards of Directors of said Companies.
0% A o.,+�' IN TESTIMONY WHEREOF, I have hereunto set my hand affixed my Official Seal, at the City of Newark,
New Jersey the day and year first above written.
I,irelle A.Out�leyJ a Notary Public of New Jersey !"""`�` CERTIFICATION My Commission Expires April 4, 2023
I, the undersigned officer of HARCO NATIONAL INSURANCE COMPANY and INTERNATIONAL FIDELITY INSURANCE COMPANY do hereby certify
that I have compared the foregoing copy of the Power of Attorney and affidavit, and the Qcpy of the Sections of the By -Laws of said Companies as set
forth in said Power of Attomey, with the originals on file in the home ❑ffice of said companies, and that the same are correct transcripts thereof, and of the
whole of the said originals, and that the said Power of Attorney has not been revoked and is now in full force and effect.
IN TESTIMONY WHEREOF, I have hereunto set my hand on this day, April 08„ 2021
A00370
Irene Martins, Assistant Secretary
(To be completed only by Contractors/Bidders claiming to be a "local Indiana business" pursuant to I.C. 36-1-12-22)
INDIANA LOCAL BUSINESS PREFERENCE CLAIM
A "local Indiana business" refers to any of the following:
(1) A business whose principal place of business is located in an affected county.
(2) A business that pays a majority of its payroll (in dollar volume) to residents of affected counties.
(3) A business that employs residents of affected counties as a majority of its employees.
(4) A business that makes significant capital investments in the affected counties as defined in rules adopted by the
political subdivision.
(5) A business that has a substantial positive economic impact on the affected counties as defined by criteria in rules
adopted by the political subdivision.
An "affected county" refers to St. Joseph County, Indiana, or the following counties located adjacent to St. Joseph
County: Elkhart County, Marshall County, Starke County and LaPorte County
There are the following price preferences for supplies purchased from a local Indiana business:
• 5% for a purchase expected by the purchasing agency to be less than $50, 000
• 3 % for a purchase expected by the purchasing agency to beat least $50, 000 but less than $100, 000.
• 1 % for a purchase expected by the purchasing agency to beat least $100, 000.
Date: April 9, 2021
Pursuant to I.C. 36-1-12-22, Alexander Chemical Corporation claims a local Indiana business
preference for Project Water Treatment Chemicals 2021-2022 (Project # ) located within the City of
South Bend, St. Joseph County, Indiana.
X The location of the principal place of business is 7593 S First Road
(Address)
❑ St. Joseph County, Indiana
X
The following county located adjacent to St. Joseph County, Indiana: LAPORTE
X The majority of the business's payroll for the 12 months prior to the date of this Bid is to residents of St.
Joseph County, Indiana or the adjacent county noted above.
❑ The majority of the business's employees for the 12 months prior to the date of this Bid are residents of St.
Joseph County, Indiana, or the adjacent county noted above.
If the business is deemed to be the apparent lowest, responsible, responsive bidder, then it shall provide
supporting documentation for the 12 month period prior to the date of the Bid of (i) the total payroll amount
paid to all employees of the business, and (ii) the total payroll amount paid to employees who are residents
of St. Joseph County and the adjacent county noted above.
WHEN SUPPLYING SUPPORTING PAYROLL RECORDS,
BIDDER SHALL REDACT ALL SOCIAL SECURITY NUMBERS.
Dated this 9th day of April , 2021.
Alexander Chemical Corporation
Co7=a
Signatur of Contractor) i er or Its Agent
Robert Davidson. President
Printed Name and Title
BID NAME
FOR BIDS DUE
•�pU
rl�...
SPECIFICATIONS
CITY OF SOUTH BEND
Water Treatment Chemicals 2021-2022
it 13, 2021; 9:00 AM, Local Time
Pursuant to notices given, the undersigned offers bid(s) to the City of South Bend in accordance with the
following attachment(s) which specify the class or item number or description, quantity, unit, unit price
BLENDED PHOSPHATE SEQUESTRANT CORROSION INHIBITOR............................................................................... 5
CHLORINESPECIFICATIONS.................................................................................................................................................. I
DRY POLYMER FLOCCULENT................................................................................................................................................ 8
FERRIC CHLORIDE .............................
FLUORISILICIC ACID
.............................................2
3
LIQUIDCALCIUM NITRATE 66%........................................................................................................................................... 9
POTASSIUM PERMANGANATE.............................................................................................................................................. 4
SALTSPECIFICATION............................................................................................................................................................... 6
SODIUM HYPOCHLORITE 12.5%.......................................................................................................................................... 10
SODIUM PERMANGANATE..
STRUVITE REMOVER/PREVENTATIVE................................................................................................12
SULFURDIOXIDE........................................................................................................................................................................ 7
FOR ALL CHEMICALS
For security Durnoses vendors shall confirm via Fax a cvDv of the delivery driver's license. truck and trailer
information alone witli the anticipated time of arrival not later than 24 hours nrior to arrival. failure to do
so will be cause for reieetion of material, no billable_ time will be Accepted.
Water Works facility deliveries are to be made on normal work days between 7:00 a.m. and 11:00 a.m. with unloading to be
completed before 1: 00 p.m, Wastewater facility deliveries are to be made between the hours of 6:00 AM and 4:00 PM Monday
through Friday.
No stop -off or fuel surcharges allowed; however, demurrage charges will be allowed after 2 hours
per stop. All deliveries are F.O.B. Delivery Point.
Awards of this bid will be divisible by product. Awards will be based on the lowest responsive
and responsible bidder per unit prices on the attached schedule.
All prices quoted are to be effective May 1, 2021 through April 30, 2022 (One Year). Prices are
to be firm throughout that period without increases.
Quantities are estimated and not guaranteed. The City reserves the right to exceed the estimate at
the price quoted here in.
I. CHLORINE SPECIFICATIONS
INCLUDE BOTH 150# AND TON CYLINDERS
A. GENERAL
1. Only containers which currently are authorized by regulation for chlorine,
which have been inspected and reconditioned as described herein, and which
have been tested within the period required by regulations should be filled. It
is illegal to ship chlorine containers that have been filled by or without the
consent of the owner.
2. Due to the volatile nature of this chemical, the chlorine provider must be able
to have one (1) accredited Safety and Handling of Chlorine class per year for
South Bend Personnel.
3. Chlorine quotes should be deposit -free. No cylinder deposit should be
included in the quote.
Boiling Point
-29.29°F-34.05°C)
Critical Density
35.77 lb./cu. ft.
Critical Pressure
1118.4 psia 76.1 Atmos.)
Critical Temperature
291.20' (144.°C
Critical Volume
0.02796 cu. ft./lb.
Latent Heat of Vaporization
123.7 Btu./lb. (a -_),Boiling point
Liquid Gas Relationship:
1 volume liquid chlorine = wt. at
457.6 volumes of chlorine, 825 @
standard conditions
Melting Point
-149.76°F (-100.98°C
Specific Gravity - Dry Gas
2.482
Specific Gravity —Liquid
1.468 0 ° - 4°C
B. CHLORINE 150 POUND CYLINDERS
1. Construction
a) All cylinders must be compatible with Chlorine Institute Emergency Kit "A". All
kit devices must be useable on any cylinder in chlorine service. The maximum
neck ring diameter that will accommodate an "A" hood is 4-314 inches.
2. Cylinder Types
a) Chlorine cylinders must comply with DOT specs, 3A480, 3AA480, 25, 3, 3BN480
or 3E1800. The regulations permit only one opening in chlorine cylinders -at
the top for the valve connection.
3. Cylinder Styles
a) Cylinders may be of three styles: footring, bumped bottom, or double bottom.
4. Cylinder Threads
a) The threads in new cylinders are NGT threads 314-14NGT(CI).
5. Chlorine Ton Containers
a) All ton containers must be compatible with Chlorine Institute Emergency Kit "B".
6. Ton Container Types
a) Chlorine ton container types must comply with DOT spec. 106A500X, DOT or
ICC 106A500, 27, BE27.
b) Ton Container Valve and Fuse Plug Opening Threads
c) The threads in new ton containers are 314-14NGT (CI).
7. Valve Protection
a) The cylinder and ton container valves are protected during shipment and storage
by a removable steel valve protective housing or cap. Pressure relief devices
shall not be covered by the housing.
8. Cylinder and Ton Container Capacity
a) In cases where the capacity of a chlorine container is not known, it can be
determined by weighing it empty and again when completely filled with water,
and by multiplying the weight ofwater at 60OF by 1.25. This is the maximum
allowable weight of chlorine allowed in the cylinder or ton container.
C. STAMPING
1. Cylinder Stamping
a) When manufactured, cylinders are stamped with DOT specification number,
serial number, and owners and/or builders identifying symbols as well as
inspector's official mark and initial test date [DOT Section 173.34(c)] of 49CFR.
2. Ton Container Stamping
a) When manufactured, ton containers are stamped with DOT specification number,
material, serial number, inspector's official mark, name, mark or initials of
company for whose use the tank is made, (or builder's symbol and serial
number), date of test, and water capacity [DOT Section 179.300-18]. Tare
weights may be stamped by builder. Changes in stamping must be made in
compliance with DOT Section 173.31(d) or 49CFR.
3. Retest Stamping
a) Retested cylinders [DOT 49 CFR, Section 173.34 (e)(6)J and ton containers
[DOT 49 CFR, Section 173.31(d)(7)J must be stamped to show date of retest.
For cylinders, the stamp must include the test facility's certification number in a
prescribed pattern. Ton containers do not require the test facility's number on
the container.
4. Tare -Weight Stamping
a) It is recommended that all new chlorine cylinders and ton containers be stamped
with the original tare weight by the container manufacturer.
D. VALVES
1. Cylinders
a) Chlorine cylinders are to have a single chlorine Teflon style valve produced by
Sherwood or Tekno which is equipped with a fusible metal plug -type relief
device. This is a must comply safety requirement.
2. Ton Container Valves
a) Chlorine ton containers are to have two identical Teflon style valves produced by
Sherwood or Tekno near the center of one head. This is a must comply safety
requirement. When vertically aligned, the valve in the upper position is used for
gas withdrawal, and the lower one for liquid withdrawal. The standard ton
container valve is identical to the cylinder valve except that it has no fusible
metal type relief device, and the valve seat diameter may be larger than on most
cylinder valves. There are tow sizes of ton container valves: 314 inch NGT and 1
inch NGT.
3. Valve Outlet Threads
a) Outlet threads on cylinder and ton containers are special straight threads
(1, 030" - 14NGO-AH-EXT) which conform to connection number CGA 820 and
B20C which utilize a yoke -type connection. These threads are to accommodate
the outlet cap only and are not to be used for chlorine hose connections.
E. PRESSURE RELIEF DEVICES
1. Cylinders
a) The relief device on chlorine cylinders is a fusible metal plug in the cylinder
valve located below the valve seat. The fusible metal is cast into an 'Alloy "B" or
Alloy "A"holder which is screwed into a tapped hole in the valve body. The
fusible plugs are designed to melt between 158 degrees F and 165 degrees F.
2. Ton Containers
a) Ton container valves contain no fusible plugs. The container itself is equipped
with six threaded fusible plugs, three in each head, spaced approximately 1200
apart.
3. Ton Container and Cylinder Inspection, Cleaning, and Reconditioning
a) In addition to the required period retest, it is recommended that each ton
container and cylinder be internally and externally inspected prior to each
filling. This includes all appurtenances, such as valves and fusible plugs.
Criteria for such inspection is outlined in "Cylinder and Ton container
Procedure for Chlorine Packaging, " Chlorine Institute Pamphlet 17, Sections 3,
4, and 5.
F. PERIODIC RETESTING AND RE -INSPECTION
1. Cylinder and Ton Containers to be Tested
a) Cylinders (except DOT 3E 1800) and ton containers must be retested at least
once in five years (DOT Section 173.34e and Section 173.31 d).
b) Cylinders cannot be filled until they are retested after the five year anniversary
of the month in which it was tested. Ton containers can be filled until the end of
the calendar year during which their five year test is due.
c) Retests are also required after any reheat treatment. In addition, retest any
container which shows evidence of weakness at any time, or show a S percent or
more loss in weight.
2. Test Procedure
a) Cylinders and ton containers are hydrostatically retested by the hydrostatic
expansion method [DOT Section 173.34 (a) and Section 173.31 (d)J. If at the
time of requalification a container shows a leak or a permanent expansion which
exceeds 10% of the total expansion, it must be condemned.
3. Container Records
a) Records must be kept showing results of the test. Each container must have the
test date plainly and permanently stamped into the metal of one head or the
chime of each task passing the hydrostatic retest.
G. CONDITIONS OF DELIVERY
1. A South Bend Water Works representative shall specify the location for
chlorine cylinder and ton container deliveries.
2. Delivery Locations:
Location
Type of Container
Address
North Station
2,000 lb. Ton Container
830 North Michigan Street
Carriage Hills
150 lb. Cylinder
52290 Shenandoah Drive
Erskine
150 lb. Cylinder
4116 South Fellows Street
South
2,000 lb. Ton Container
3600 South Main Street
Cleveland South
150 lb. Cylinder
4900 Cleveland Road
Cleveland North
1 150 lb. Cylinder
4949 Cleveland Road
Wastewater j
2,000 lb. Ton Container
3113 Riverside Drive
3. Vendor personnel shall conduct all activities related to the loading and
unloading of cylinders.
4. Ton containers will need to be delivered with a cherry picker.
Minimum deliveries are one (1) ton containers and twelve (12) 150#
cylinders.
6. Sunnlier must be able to guarantee delivery within 3 to 4 calendar daVs
after order_ placement
7. Vendor personnel shall not unload any filled cylinders or ton containers prior
to live inspection by South Bend Water Works Personnel.
8. Vendor personnel shall assist South Bend personnel in the visual inspection of
each cylinder or ton container for:
a) External damage or defect
b) Proper installation of valve protection housing or caps
c) Visual inspection of valves and fusible plugs
i) All old wire from previous hung tags are to be removed prior to delivery
H) All fusible plugs should be defect free (no pits or holes )
d.) Determination of markings of retest and recertification
Motor vehicles used to ship ton containers shall be properly equipped with lift
equipment suitable for handling containers to any point where the container is
to be loaded upon or unloaded from the vehicle.
1. Cylinders containing chlorine shall be securely lashed in
an upright position, loaded into racks securely attached
to the motor vehicle, or packed in boxes or crates of
such dimensions as to prevent their overturning.
E.) + E RRIC CHLORIDE
A. GENERAL
b. DELIVERY
i. Normal concentration percent by Weight; 33-35%
ii. Specific Gravity: 0.33
i. Full truck deliveries (4500 gallons) to the Ferric feed
facility Plant located at; 3113 Riverside Drive, South Bend,
IN 46628
F.) FL ORISILICIC ACID
A. GENERAL
The Fluorisilicic Acid supplied under these specifications shall be clean and
free of visible suspended matter and shall not contain more than 0.020 percent
of the "heavy metals", mercury, lead, bismuth and copper expressed as lead
(Pb); and shall contain no soluble mineral or organic substances in quantities
capable of a deleterious or injurious effect upon the health of those consuming
water that has been treated properly with fluorsilicic acid.
ii. Product to meet the latest AWWA standard for Fluorisilicic Acid (13703).
iii. Price is to be based on a 23% solution.
Bidders shall quote price per gallon. Prices must be submitted and billed in cost
per gallon with freight included, billed to the nearest penny.
B. DELIVERY
The vendor shall deliver bulk fluoride to the following well locations in the
quantities as specified by a representative of the South Bend Water Works.
All deliveries shall be made within 48 hours of the request
ii. 23% Fluorisilicic Acid delivered in tank truckloads.
iii. Deliveries are estimated at thirteen (13) tank trucks with two to four stop -offs
per 20,000 lb. load.
iv. No stop -off or fuel surcharges allowed however, demurrage charges will be
allowed after 2 hours per stop.
V. Suppliers must furnish own unloading hose at least 40 feet in length with
proper couplings to hook onto two male N.P.T., and must blow off hose to
bulk tank at each stop.
vi. fitwill not aece t delivery of more than 10% over the order guanifty.
vii. Delivery Locations:
Location
Bulk Tank
Address
North Station
1600 gallons
830 North Michigan Street
Carriage Hills
400 gallons
52290 Shenandoah Drive
Edison
1350 gallons
2708 Rockne Drive
Erskine
400. allons
4116 South Fellows Street
South
600 gallons
3600 South Main Street
Cleveland South
1100 gallons
4900 Cleveland Road
Cleveland North
600 gallons
4949 Cleveland Road
Pinhook
900 gallons
3801 Riverside Drive
Olive
2400 gallons
915 South Olive Street
G.)PGTASSIUM PERMANGANATE
A. MATERIAL
Free Flowing Grade Potassium Permanganate shall meet the requirements of
AWWA Specification 603-98 and shall be manufactured domestically and
certified suitable for use in public water supply by appropriate state and
federal agencies.
B. DELIVERY
The potassium permanganate shall be delivered in 55 pound pails made of 24-
gauge steel or plastic and shall be equipped with a handle.
1. The pails shall remain the property of the South Bend
Water Works.
2. The pails shall be unloaded and neatly stacked at the
pumping stations.
ii. Deliveries will be ordered on an as needed basis with each delivery consisting
of approximately 8 to 16 (55 Lb.) pails.
iii. Deliveries must be made within 5 days of placement of the order.
iv. Vendor shall deliver pails to the following site:
1. Water Works North Station — 830 North Michigan Street
H.)PYROPHOSPHATE SE UESTRANT AGENT
A. STANDARDS
Product shall be a minimum of 85% sodium pyrophosphate.
ii. The remaining ingredient(s) shall also be sodium phosphate material(s).
Product must already be listed in the latest National Sanitation Foundation
(NSF) Standard 60 directory.
iii. The percent phosphate as PO4 must be disclosed and by Indiana law, be
marked on the outside of the container.
B. TECHNICAL ASSISTANCE
The successful vendor giving a quote must also provide on -site technical
assistance to the Authority for an eight hour day per month for the first six
months of product usage.
ii. After the first 6 months of on -site technical assistance, the Authority will
request further on -site technical assistance on an as needed basis.
iii. The vendor shall provide a per visit cost in their quote for the additional site
visits.
iv. Each visit will be one workday (Monday through Friday only), from 7:00 a.m.
to 3:30 p.m. EST.
V. Vendor must submit the name(s) and resume(s) of the technical representative
that will perform the on -site assistance with your quote submittal.
vi. The technical representative shall be an employee or certified representative
of the vendor and have a minimum of three years of experience in the
application of pyrophosphate sequestering products in municipal water supply
and be available Monday through Friday from 7:00 a.m. to 3:30 p.m. EST to
answer questions which may arise in applying their product.
C. REQUIREMENTS
i. A list of two municipal references within a one hundred mile radius of South
Bend using the product for a minimum of one year.
ii. Each reference must include the name of the municipality, the
superintendent's name, and phone number.
iii. A one pint sample must be submitted with bid for analysis.
iv. During the contract period, additional sampling and analysis will be made.
V. Contract can be nullified if testing indicates unauthorized changes have been
made to product.
vi. Samples of product being used by references may also be sampled.
vii. Evaluation
viii. Testing
ix. Other evaluation:
X. Certified Analysis
1. Sample product analysis
2. Reference interview and possible sample analysis
3. Verification of ingredients.
1. The City reserves the right to submit samples of the
polyphosphate product to an independent laboratory of
the City's choice for chemical, biological, and physical
analysis and testing.
2. Any product which, in the City's opinion, contains
hazardous or deleterious substance or fails to comply
with these specifications will be disqualified.
3. The cost of this analysis and testing will be incurred by
the vendor with the understanding that a maximum of
ten samples per year will be submitted.
4. Guaranteed minimum available phosphate percentage
as PO4 is to be Eighty Percent (80016).
1. List of data that confirms products effect on (a) copper,
(b) sequestration
2. List of data that confirms company' experience in other
cities and technical support.
1. The supplier shall provide a certified chemical analysis
of a pyrophosphate product sample taken from the
production facilityfrom which he proposes to supply the
City of South Bend.
2. He shall further certify analysis to be representative of
the product he proposes to provide the City.
xi. Performance Requirements
When applied at a rate yielding not more than four (4)
parts ofpyrophosphate as PO4 to each part of iron and
manganese, the product shall be capable of holding iron
and manganese in solution for no fewer than five (5)
days at seventy (70) degrees Fahrenheit in the presence
of one-half milligram per liter (0. 5 mg/I) free chlorine
residual and for no less than twenty-four (24) hours at
140 degree F.
2. The City reserves the right to run performance tests once
a month.
3. Any product which, in the City's opinion, does not meet
the specified performance requirements or fails to
comply with the specifications will be disqualified.
D. COVERAGE
i. These specifications cover pyrophosphate compounds used to stabilize or
sequester soluble iron and manganese in potable water.
E. PHYSICAL FORM
i. Product shall be a granular form. Powdered material will not be accepted.
F. PHYSICAL STANDARDS
i. Phosphate blend shall comply with the following physical requirements:
1. Color: White
2. Solubility: Completely miscible in water
3. Percent Phosphate as PO4 Minimum of 80%
4. Physical Form: Granular
G. CHEMICAL STANDARDS
i. Phosphate blend shall contain only NSP approved phosphorous ingredients.
ii. No amines or other chelating agents shall be used.
iii. Blended phosphate product formulation shall be only sodium salts of
phosphate compounds.
iv. No potassium salts shall be used.
V. Impurities in pyrophosphate products shall not exceed the following
concentrations:
Arsenic as AS
0.001 mg/1
Copper as CU
0.2 mg/1
Heavy Metals total as Pb
0.001 mg/1
Iron FE
0.1 mg/1
Manganese as MN
< .05 mg/1
Organics as C
None
Silica as S1O2
1.0
Zinc as ZN
0.01 m /1
vi. In addition to the above standards, pyrophosphate products shall contain no
substance, for which the Indiana Pollution Control Board has established a
limit in potable water, in a concentration exceeding the limit established for
potable water.
H. PACKAGING & DELIVERY
i. Product shall be shipped in 50 pound bags and stored locally.
ii. Deliveries are to be made within two to three days of notice.
iii. Vender will be required to deliver product weekly or as needed to each well
field in order to maintain specified stock levels.
iv. Weekly delivery receipts will be issued.
V. Delivery sites are as follows:
Location
Address
Carriage Hills
52290 Shenandoah Drive
Erskine
4116 South Fellows Street
South
3600 South Main Street
Cleveland South
4900 Cleveland Road
Cleveland North
4949 Cleveland Road
I.) SULFUR DIOXIDE
A. PROPERTIES
Boiling Point
-10°C
Color
Colorless
Specific Gravity
80°F
1.363
Critical Temp.
314.82°F
Critical Pressure
1141.5 PSIA
B. USAGE
i. Estimated annual usage is 100 tons, more or less, to be delivered in 2,000 lb
containers of liquid SO2 in truckload lots of 10 containers.
C. DELIVERY
i. Supplier must be able to guarantee delivery of 10 tons (20,000 lbs) within five
(5) calendar days from release of requirement.
ii. Material to be delivered F.O.B.
iii. No freight surcharges allowed.
iv. Billing must be submitted on a CWT unit basis.
V. Delivery Location: Wastewater Treatment Plant located at 3113 Riverside
Drive, South Bend, Indiana 46628.
J.) DRY POLYMER FLOCCULENT
A. GENERAL
The purpose of this specification is to outline minimum acceptable properties
of a polymer at the Bureau of Wastewater in the treatment process.
ii. Quantity of the polymer stated in this specification is intended as an estimated
usage during a 12 month period rather than an absolute quantity.
iii. Polymer is considered a performance product and must meet certain standards
due to compliance related issues on the NPDES Permit.
iv. Any supplier that has not been previously approved must perform bench
testing on any polymer bid to prove the product will meet the standards
necessary to ensure permit compliance.
V. When samples are required, such samples shall be delivered or shipped at the
vendor's expense to the following name and address: Nancy Clay, 3113
Riverside Dr. South Bend, IN 46628.
vi. Samples must be clearly labeled with your company's name, address, and
(item number).
vii. All samples must be representative of the item bid.
viii. All samples will become the property of the City of South Bend, and will not
be returned.
B. PROPERTIES
Products will be a high molecular weight cationic polyelectrolyte, supplied as
a micro -bead or in granular form.
ii. The product must be completely non -dusting, free flowing and completely
soluble in water with a very rapid dissolving rate.
iii. Typical Properties
Bulk Density
50 lbs. per cubic ft.
Particle Size
95% less than 1 mm
H of 1 % Solution
3.5 — 4.5
C. PACKAGING/DELIVERY
Packaging to be in 50 — 55 lb polyethylene bags.
ii. Must be able to guarantee delivery of 9,000 lbs within 14 calendar days after
order placement.
iii. Prices must be submitted in cost per pound with freight included.
iv. Material to be delivered F.O.B. the Wastewater Treatment plant located at
3113 Riverside Drive, South Bend, IN. 46628.
K.)LI UI❑ CALCIUM NITRATE 66%
A. GENERAL
i. The estimated annual usage of Liquid Calcium Nitrate (66%) is 45,000
gallons, more or less.
ii. Supplier must be able to guarantee delivery of 4,000 to 5,200 gallons within
five (5) calendar days after order placement.
B. TYPICAL PROPERTIES
Concentrations:
Ca 03 2
46.34%
Ca 03 2.4H20
66.5%
Ca
11.2%
Mn m
Less than 1
Specific Gravity:
1.454 /ml at 20°C
H:
6.00 at 20°C
C. DELIVERY
Full truck load quantities are to be approximately 3,500 gallons
ii. Delivery will be to two separate remote locations. Geyer Ditch GPS location
41.69565,-86.40614. Sage Road GPS location 41.71024,-86.41629.
iii. Remote locations are accessed via a combination lock. Delivery requests will
include the combination lock if City personnel will not be on -site during
deliveries. If City personnel will be on -site the combination will be omitted
from the manifest.
iv. Prices must be submitted in cost per gallon with freight included.
L.) SODIUM HYPOCHLOR:I.TE 12.5%
A. GENERAL
i. The estimated annual usage of Sodium Hypochlorite is 62,000 gallons more or less.
ii. The City owns multiple 2,550+ gallon tanks for the storage of Sodium Hypochlorite 12.5%.
iii. These tanks come equipped with all necessary fittings and outlets, as well as secondary
containment for increased safety.
iv. Supplier must have necessary hoses and connectors to connect to a 2 inch quick disconnect
fitting.
V. Product delivered to a Water Filtration Facility must meet the required ANSI/NSF Standard
60.
vi. No stop -off fees or surcharges allowed however, demurrage charges will be allowed after 2
hours per stop
B. TYPICAL PROPERTIES
Concentrations
Sodium Hypochlorite
12.5%
Specific Gravity
1.1964
H
12.5 to 13.5
Molecular Weight
74.44
Boilina Point
>212°F
Freezing Point
-11°F
C. DELIVERY
i. Supplier must be able to guarantee delivery of 1,800 to 4,500 gallons within 3 to 4 calendar
days after order placement. All deliveries shall be made within 48 hours of the request
ii. Full truck load quantities of approximately 1,800 to 4,500 gallons are to be delivered, F.O.B.
to:
a.) Wastewater Treatment Plant, 3113 Riverside Drive, South Bend, IN. 46628.
b.) Pinhook Filtration Plant, 2801 Riverside Drive, South Bend, IN 46628.
c.) Edison Filtration Plant, 2708 Rockne Drive, South Bend, IN 46615.
d.) Olive GAC Building, 915 S. Olive Street, South Bend, IN 46613.
3.) Prices must be submitted and billed in cost per gallon with freight included, billed to the
nearest penny.
4.) Multiple stops per load are to be expected.
m.) SODIUM PERMANGANATE
a. GENERAL:
The bid will be for two separate line items for the same product (20%
Liquid Sodium Permanganate)
ii. One line item will be for deliveries of 275-gallon totes.
iii. The other will be for deliveries between 500 and 550 gallon increments.
b. TYPICAL PROPERTIES
i. Product shall be bulk 20% (by weight) +/- 0.5% liquid sodium
permanganate (NaMnO4).
ii. 20% Liquid Sodium Permanganate shall be produced domestically with in
the United States.
iii. Product shall meet or exceed ANSI/AWWA standard B603-03 or
subsequent revisions.
iv. Product shall be listed by the NSF as being in full compliance with NSF
Standard No. 60 for Drinking Water Treatment Chemicals — Health
Effects.
C. DELIVERY
1. All deliveries shall be made within 48 hours of the request to the following address: 2801
Riverside Drive, South Bend IN 46628.
2. The product is to be delivered in clean containers/tanks and is free of contamination.
Contamination of stock shall render the contractor liable for disposal of contaminated material,
cleanup of storage facilities and full replacement of stock at the Supplier's expense.
3. All deliveries shall be made on weekdays (excluding holidays) between the hours 7:00 AM
and 11:00 AM
4. The off-loading of the 275-gallon totes containing sodium permanganate from the delivery
vehicle to the City's storage location will be performed by pressurizing the container to our point
of delivery or by transfer pump.
5. Deliveries must be coordinated with the City. The Identity of the driver must be made known
by fax or email 24 hr. prior to delivery. The delivery vehicle operator must call the City contact
no less than one hour prior to delivery.
6. The Contractor and shipper shall be responsible for all health, safety, and costs associated with
the transportation of the product to the Pinhook WTP. 2801 Riverside Drive 46628.
7. The City reserves the right to reject any delivery which does not conform to these
specifications or which has been contaminated.
N.) STRUVITE REMOVER AND PREVENTATIVE
A. GENERAL
The purpose of this specification is to outline minimum acceptable properties of a struvite
remover/preventative at the Bureau of Wastewater in the treatment process.
ii. Quantity of the product stated in this specification is intended as an estimated usage during a
12 month period rather than an absolute quantity.
B. PROPERTIES
i. The product must be non -toxic and require no additional PPE to handle and/or maintain.
ii. Vendor shall supply (at no charge) and maintain (at no charge) all chemical feed pumps,
spray bars, spray nozzles and injection equipment (where applicable).
iii. Product must have a minimum dilution rate of 40 000:1.
iv. Vendor must have a minimum of five (5) installations with five (5) years of proven process
application of struvite removal and prevention.
V. Product must be manufactured and distributed solely from the U.S.A.
vi. Typical Properties
Flammability
None
H
Neutral
Solubility
Miscible
C. PACKAGING/DELIVERY
i. Packaging to be in 275 gallon totes.
ii. Must be able to guarantee delivery of 275 gallons within 10 calendar days after order
placement.
iii. Material to be delivered F.O.B. the Wastewater Treatment plant located at 3113 Riverside
Drive, South Bend, IN. 46628.
BID/PROPOSAL
CITY OF SOUTH BEND
BID NAME Water Treatment Chemicals 2021-2022
FOR BIDS DUE April 13.2021 : 9:00 a.m., Local Time
Total
Item
Est. Qty.
Item
Units
Unit Price
No.
Per Year
$ 90,000.00
r $ 6,300.00
$ -----
1
150
Chlorine— 1 Ton Cylinders
Ton
$ 600.00
2
140
Chlorine —150 Lb. Cylinder
Cyl
$ 45.00
3
90,0000
Ferric Chloride
Gal.
$ NO BID
Fluorisilicic Acid — 23%
Gal.
4
13,000
Price Below 1943 gallons
$ 2.20
ce beic
$28,600.00 * (1g43 gal)
Price Above 1943 gallons
""
$ 2.08
$27,040.00 1943 gal)
Potassium Permanganate — 55 Lb. Pails
Lbs.
5
1,600
$ NO BID
$ --�-
6
22,500
Pyrophosphate Sequestrant Agent
Lbs.
$ NO BID
$ -----
7
100
Sulfur Dioxide — 1 Ton Cylinders
Ton
$ 569.00
$ 56,900.00
8
40,000
Dry Polymer Flocculent — 50 / 55 Lb.
Lbs.
Polyethylene Bag
$ NO BID
$
Liquid Calcium Nitrate
Gal.
9
25,000
$ 2.03
$ 50, 750.00
Sodium Hypochlorite — 12.5%
Gal.
10
62,000
Price Below 1800 gallons
$ 0.952
$ 59,024.00 1800ga1)
Price Above 1800 gallons
$ 0.791
$ 49,042.00 180 gal)
Sodium Permanganate
Gal.
11
1100
275 Gallon Totes
$ NO BID
$ -----
Sodium Permanganate
Gal.
12
250
500 Gallon Bulk
$ NO BID
—
$
13
1100
Struvite Remover 275 Gallon Totes
Gal.
$ NO BID
$ ---
TOTAL **'
$ (See directly below.)
Bidder (Firm): Alexander Chemical Corporation
Address: 7593 S First Road
City/State/Zip: LaPorte, IN 46350
q
*** Unsure how to compute a total
with two items having multiple
quantity quotes. (ie. Above/Below
for Fluorisilicic Acid and Sodium
Hypochlorite.)
800-348-8827 or
Telephone Number: 219-393-3770
2
BOARD OF PUBLIC WORKS
Elizabeth A. Maradik, President
Gary A. Gilot, Member
Jordan V. Gathers
Fax Number: 219-393-5364
(Signature)
Robert Davidson
(Printed Name)
President
(Title)
Joseph R. Molnar, Member
Attest: Anne Fuchs, Clerk
yi�u� rr er..
t 3!
l AN .Jf.
CITY OF SOUTH BEND
INSTRUCTIONS TO BIDDERS A
f:4 f.
BID FORMS AND EXECUTION
A. Bidders are expected to examine the Drawings, Specifications, Proposal and all Instructions.
Failure to do so will be at the Bidder's risk.
B. Each Bidder shall furnish all information required by the Notice, Instructions to Bidders and
Specifications. Bids must be made on the form provided. The Bidder shall sign the Proposal
and Non -Collusion Affidavit, which is a part of the provided form, where indicated, provide a
notary signature and provide all other information required.
C. The Bidder shall sign the Proposal in the following manner: If the Proposal is made by an
individual, his/her name and post office address must be shown. If made by a partnership or
joint venture, the name and post office address of each member of the partnership or joint
venture must be shown. If made by a corporation, the Proposal must be signed by an officer
of the corporation or by a representative duly authorized by the corporation to execute the
Proposal in its behalf.
2. SEALED BIDS ONLY
A. The City of South Bend, Indiana, Board of Public Works will receive sealed electronic Responses at
bpwbidAs southbent{in.goy.
B. "Bid for Computer Equipment," "Bid for Front End Loader," or "Bid for Office Supplies."
C. When samples are required, such samples shall be delivered or shipped at the bidder's
expense to the address specified in the Invitation to Bid. Samples must be shipped
separately from bid documents and labeled clearly with the Bidder's name, address and the
commodity or equipment classifications and documents, the item (and item number, if any),
and Material Safety Data Sheets (if applicable). All samples must be representative of the
commodities or equipment which will be supplied by the successful Bidder. All samples will
become the property of the City of South Bend and none will be returned, unless otherwise
stated in the Specifications.
D. In the event of an inconsistency between provisions of the contract documents, the
inconsistency shall be resolved by giving precedence in the following order:
ORDER OF PRECEDENCE
A. Bid Form attached Proposal
B. Amendments to Specifications
C. Specifications
D. Special Provision
E. Instructions to Bidders
F. Notice to Bidders
DELIVERY OF BIDS
The City of South Bend, Indiana, Board of Public Works will receive sealed electronic
Responses at bpwbids(&southbendin.gov.
ADDENDA— NO VERBAL INTERPRETATIONS
A. No inquiries by Bidders relative to interpretation of Plans, Specifications, Special Provisions,
or other Bidding Documents will be answered verbally. If any prospective Bidder is unable or
unwilling to comply with one or more requirements of the bidding document, such Bidder
should so inform the Board of Public Works in writing. Upon receipt of such information,
consideration will be given to the advisability of issuing an Addendum which would thereupon
become applicable to all Bidders. Any such inquiry must be submitted at least seven (7) days
prior to the bid opening date in order to give the Board sufficient time to consider any
necessary Addendum. All answers to such inquiries, in the form of Addenda, will be furnished
to all prospective Bidders who have registered with the City. All Bidders are required to
acknowledge receipt of any Addenda by inserting the Addendum number and the issuing date
on executed Proposals.
REJECTION OF PROPOSALS CONTAINING ALTERATION, ERASURES, INCOMPLETE
BIDS AND ETC.
A. Proposals shall be rejected if they show any alteration of form, additions not called for,
conditional or alternate bids (except when and insofar as are invited), incomplete bids,
erasures or irregularities of any kinds.
B. All blank spaces for bid prices must be filled in, in ink, with the unit price and total price for
each item (This does not apply to divisible bids). In case of incorrect totaling of amounts and
where the unit price and the extension thereof do not agree, the unit price for each item shall
govern, and the City is authorized to correct all erroneous extension and totals for the purpose
of comparing bids.
7. TRADE DISCOUNTS
A. Trade discounts shall not be shown separately, but shall be incorporated in the Bidder's unit
price, unless otherwise specified.
8. VEHICLE BIDS
A. Bidders may bid on one (1) or more vehicles, provided however, that the bid submitted for
each vehicle is delivered in a separate, sealed envelope, by vehicle, with the envelope clearly
labeled on Bidders may bid on one (1) or more vehicles, provided however, that the bid
submitted for each vehicle is delivered in a separate, sealed envelope, by vehicle, with the
envelope clearly labeled on the outside as to the specific vehicle for which the bid is being
submitted. Bidders may submit separate bid bonds for each vehicle being bid upon OR may
submit one (1) bid bond equal to 10% of the combined total of all vehicle bids submitted.
9. The Board may reject any bid that does not conform to these requirements as non-
responsive.
10. TAX EXEMPTIONS
A. The City of South Bend is exempt from the payment of federal excise and transportation taxes
levied under the provision of the Internal Revenue Code. It is also exempt from the Indiana
State Gross Retail Tax (sales tax). The City will furnish the successful Bidder with any
certificate of exemption required.
11. WITHDRAWAL OF BIDS
A. Withdrawal of bids will be allowed only in those cases in which a written request to withdraw a
bid is received by the Board of Public Works prior to the date and hour for receiving and
opening bids. In such cases, the same will be returned to Bidder unopened.
12. ESCALATOR OR CONTINGENT CLAUSES
A. The use of escalator clauses or other contingent clauses by the Bidder is prohibited, unless
requested or permitted by the Invitation to Bid. No Proposal shall contain nor be
accompanied by any writing purporting to limit or qualify the City's right to accept such
Proposal or purporting to alter such Proposal or any Contract which may be executed
pursuant thereto.
13. PRICES MUST BE DELIVERED PRICES
A. The bid price shall be a delivered price. All materials shall be shipped F.O.B. destination as
specified in the Invitation to Bid. No fuel surcharges accepted.
14. AWARD — WAIVER OF TECHNICALITIES
A. The Award of Bid, if any award be made, will be made within sixty (60) calendar days after the
opening of Proposals to the lowest responsible and responsive Bidder who's Proposal
complies with all the requirements prescribed, exclusive of technicalities waived. Until the
final award of the Bid, however, the right is reserved by the City to reject any and all
Proposals and to waive technical errors.
15. SPLITTING OF AWARDS/DIVISIBLE BIDS
A. Bids will be awarded on the basis of the total dollar amount for all items in the Proposal unless
the bid is described by the City as a Divisible Bid. The City may award a Divisible Bid to the
lowest responsible and responsive Bidder for each item or class of items as indicated in the
bid documents.
16. BIDDER QUALIFICATION
A. The City may require any Bidder to submit evidence of qualifications, and may consider any
evidence of the financial, technical, and other qualifications and abilities of the Bidder. The
City will not award a Contract to a Bidder who, in its opinion, is not fully qualified on the basis
of financial resources and responsibility, possession of adequate equipment, personnel,
experience, and past record of performance to perform the obligations to be undertaken
competently and without delay.
17. PURCHASE ORDERS
A. A Purchase Order will be issued to the successful Bidder after formal acceptance of the bid is
made by the City.
18. NEW MANUFACTURE
A. Unless otherwise specified in the Invitation to Bid, the items offered shall all be new and the
latest model of manufacture.
19. SOURCE OF SUPPLY
A. If the Bidder is not a manufacturer, the source of supply must be shown and all sub-
contractors must be identified.
20. PACKAGING
A. All items shall be delivered strongly packed and marked according to accepted commercial
practice unless otherwise directed in the Specifications. No charge shall be made for
containers and the City shall have no obligation to return containers unless otherwise
provided by the Specifications or Special Provisions. Any items not received in good
condition will be rejected.
21. INSPECTION OF GOODS
A. The City of South Bend reserves the right to inspect and have any goods tested after delivery
for compliance with the specifications. Notice of latent defects, which would make the item
unfit for the purposes for which they are required, may be given at any time within one year
after discovery of the defects.
B. All items rejected must be removed immediately by the Contractor at the expense of the
Contractor. If the Contractor fails or refuses to remove the rejected items, they may be sold
by the City of South Bend.
C. The above provision shall not be construed in limitations of any rights the City may have
under any laws including the Uniform Commercial Code.
22. ASSIGNMENTS
A. No person to whom a Contract has been awarded may assign his interest in the Contract
without the consent, in writing, of the City.
23. CANCELLATION
A. The City of South Bend reserves the right to cancel any Contract for failure or refusal of
performance, fraud, deceit, misrepresentation, collusion, conspiracy, or any other misconduct
on the part of the Contractor.
24, DEDUCTION OF DAMAGES
A. If the City cancels the contract for any cause, it shall deduct from whatever is owed the
Contractor on the Contract or any other Contract, any amount sufficient to compensate the
City for any damages suffered by it because of the Contractor's wrongdoing.
25. METHOD OF INVOICING FOR PAYMENT
A. Contractor shall bill the City of South Bend
1. On regular invoice form giving a complete and detailed description of the goods delivered,
including purchase order number.
2. If the Contractor allows a discount, the period of time in which the City must make
payment to qualify for the discounts shall be computed from the date the City received the
invoice (completely filled out), or the date the goods are delivered and accepted,
whichever may be later, and shall not be less than twenty (20) days.
3. If more than one shipment is made under the Contract and on the same purchase order,
the City will make partial payments on a basis that is agreeable to both parties.
26. OWNERSHIP OF GOODS
A. The goods which are the subject of the Contract shall remain property of the Contractor until
delivered to and accepted by the City of South Bend.
27, ESTIMATED QUANTITIES
A. If the quantity set forth in the Notice to Bidders and Proposal is approximate and represents
the estimated requirements of the City for a specified period of time, the unit price and the
extended total price thereof shall be used only as a basis for the evaluation of bids. The
actual quantities necessary may be more or less than the estimate, but the City shall neither
be obligated nor limited to any specific amount. The City will, if at all possible, restrict
increases to twenty percent (20%) of the estimated quantity and will, if at all possible, restrict
decreases to twenty percent (20%) of the estimated quantity.
28. TERM "OR EQUAL"
A. Where the term "OR EQUAL" is used in these Specifications, the Bidder deviating from
specified item shall file with his/her bid a letter fully explaining and justifying his/her proposed
article or equal. The City of South Bend shall be the sole judge in determining if the "OR
EQUAL" offered meets the Specifications.
29. INDEMNIFICATION CLAUSE
A. The Contractor agrees to indemnify, defend, and hold harmless the City of South Bend, its
agents, officers, and employees from all costs, losses, claims and suits, including court costs,
attorney fees, and other expenses, arising from or out of the negligent performance of this
Contract by the Bidder or because or arising out of any defect in the goods, materials or
equipment supplied by the Bidder.
A 111--
L )MD R
ALEXANDER CHEMICAL CORPORATION
Alexander Chemical Corporation is a 100% women owned business and will offer free saftey training for
Certified Education Credits.
Robert Davidson, President
7593 S First Road, LaPorte, IN 46350
Tel 800.348.8827, Fax 219.393.5364
AEANDEP
PRODUCT SPECIFICATION SHEET
Chlorine
ALFX/ NDFP CHEMIC/.\L C PA11ON
Effective: 07/05/2018
Chemical Properties:
CAS#:
Chemical formula:
Chlorine, weight W
Moisture, ppm:
Non-volatile residue ppm:
Bromine, ppm:
Physical Properties:
Boiling point:
Freezing point:
Specific gravity (Gas), g/mL:
Specific gravity (Liquid), g/mL:
Vapor pressure, psig:
Appearance:
Odor:
7782-50-5
C12
99.50 Minimum
50.00 Maximum
50.00 Maximum
180 Maximum
- 29.39 'F
- 150.00 T
2.49 @ 32 T
1.47 @ 32/39.2 T
72@60T
Amber -colored liquid, vaporizes
to greenish -yellow gas
Sharp, suffocating, pungent
Meets ANSI/AVWUA specification B301
NSF International maximum use: 30.00 mg/L
Packaged by:
Alexander Chemical Corporation
7593 South First Road
La Porte, Indiana 46350
800-348-8827
AE>MDER
ALEXANDER CHEMICAL CORPORATION
SAFETY DATA SHEET
1. Identification
Product identifier Chlorine - Chlorine Liquefied Gas Under Pressure
Other means of identification None.
Recommended use Chlorine is primarily used as a water treatment chemical as a disinfectant.
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Supplier
Company name Alexander Chemical Corp
Address 7593 S. First Road
Kingsbury, Indiana 46345 USA
Telephone (800) 348-8827
E-mail info@alexanderchemical.com
Website www.alexanderchemical.com
Contact name Keith Bonner
For Hazardous Materials [or Dangerous Goods] Incidents ONLY(spill, leak, fire, exposure or
Emergency
accident), call CHEMTREC at
Telephone
CHEMTRECO, USA: 001 (800) 424-9300
CHEMTRECO, Mexico :001-800-13-203-9987
CHEMTREC®, Other countries: 001 (703) 527-388
2. Hazard(s) identification
Physical hazards
Oxidizing gases
Category 1
Gases under pressure
Liquefied gas
Health hazards
Acute toxicity, inhalation
Category 2
Skin corrosion/irritation
Category 2
Serious eye damage/eye irritation
Category 2A
Environmental hazards Specific target organ toxicity, single exposure Category 3 respiratory tract irritation
Hazardous to the aquatic environment, acute Category 1
OSHA defined hazards hazard
Label elements Not classified.
Signal word Danger
Hazard statement May cause or intensify fire; oxidizer. Contains gas under pressure; may explode if heated. Fatal if
inhaled. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Very
toxic to aquatic life.
Chlorine - Chlorine Liquefied Gas Under Pressure SDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 1 / 8
Precautionary statement
Prevention
Keep/Store away from clothing and other combustible materials. Keep reduction valves/valves
and fittings free from oil and grease. Do not breathe gas. Use only outdoors or in a well -ventilated
area. In case of inadequate ventilation wear respiratory protection. Wear protective
gloves/protective clothing/eye protection/face protection. Wash hands thoroughly after handling.
Avoid release to the environment.
Response
In case of fire: Stop leak if safe to do so. If inhaled: Remove person to fresh air and keep
comfortable for breathing. Immediately call a poison center/doctor. If on skin: Wash with plenty of
water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and
wash it before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention. Get medical advice/attention if you feel unwell. Collect spillage.
Storage
Store locked up. Protect from sunlight. Store in a well -ventilated place. Keep container tightly
closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
None known.
classified (HNOC)
Supplemental information
None.
3. Composition/information on ingredients
Substances
Chemical name
Common name and CAS number %
synonyms
Chlorine
7782-50-5 > 99
Composition comments
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume.
4. First -aid measures
Inhalation
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or
artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance.
Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device. Call a physician or poison control center immediately.
Skin contact
Frostbite: Do not remove clothes, but flush with copious amounts of lukewarm water. Get medical
attention immediately.
Eye contact
Frostbite: Immediately and briefly flush with lukewarm, gently flowing water. Cover both eyes with
a sterile dressing. Immediately obtain medical attention. GAS: Not applicable. No effects expected.
Ingestion
Not likely, due to the form of the product.
Most important
May cause central nervous system effects. Dizziness. Headache. Nausea, vomiting. Severe eye
symptoms/effects, acute and
irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.
delayed
Permanent eye damage including blindness could result. May cause respiratory irritation.
Coughing. Burning pain and severe corrosive skin damage. May cause redness and pain.
Indication of immediate
Provide general supportive measures and treat symptomatically. Keep victim under observation.
medical attention and special
Symptoms may be delayed.
treatment needed
General information
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Show this safety data sheet to the doctor in attendance.
5. Fire -fighting measures
Suitable extinguishing media
Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing None known.
media
Specific hazards arising from Contents under pressure. Greatly increases the burning rate of combustible materials. Containers
the chemical may explode when heated. During fire, gases hazardous to health may be formed. Hydrogen
chloride gas.
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters
Chlorine - Chlorine Liquefied Gas Under Pressure SDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 2/8
Fire fighting Allow gas to burn if flow cannot be shut off immediately. Apply water from safe distance to cool
equipment/instructions container and protect surrounding area. In case of fire: Stop leak if safe to do so. Do not move
cargo or vehicle if cargo has been exposed to heat. ALWAYS stay away from tanks engulfed in
flame. Move containers from fire area if you can do so without risk. Do not direct water at source of
leak or safety devices as icing may occur. Use water spray to cool unopened containers. Do not
get water inside containers. Withdraw immediately in case of rising sound from venting safety
device or any discoloration of tanks due to fire. For massive fire in cargo area, use unmanned
hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out.
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials. Cool
containers exposed to flames with water until well after the fire is out.
General fire hazards May intensify fire; oxidizer.
6. Accidental release measures
Personal precautions,
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of
protective equipment and
low areas. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area).
emergency procedures
Wear appropriate protective equipment and clothing during clean-up. Avoid breathing gas.
Emergency personnel need self-contained breathing equipment. Do not touch damaged
containers or spilled material unless wearing appropriate protective clothing. Ventilate closed
spaces before entering them. Local authorities should be advised if significant spillages cannot be
contained. For personal protection, see section 8 of the SDS.
Methods and materials for
If this gas leaks without igniting, extreme caution must be used; flammable or explosive mixtures
containment and cleaning up
with air may be formed. Extinguish all flames in the vicinity. This product is miscible in water. Stop
leak if you can do so without risk. Use water spray to reduce vapors or divert vapor cloud drift.
Isolate area until gas has dispersed. Dike far ahead of spill for later disposal. Prevent entry into
waterways, sewer, basements or confined areas. Following product recovery, flush area with
water. For waste disposal, see section 13 of the SDS.
Environmental precautions
Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into
drains, water courses or onto the ground. Runoff from fire control or dilution water may cause
pollution.
7. Handling and storage
Precautions for safe handling Do not handle, store or open near an open flame, sources of heat or sources of ignition. Protect
material from direct sunlight. Keep away from combustible material. Contents under pressure.
Keep reduction valves free from grease and oil. Valve protection caps must remain in place unless
container is secured with valve outlet piping to use point. Close valve after each use and when
container is empty. Do not drop, drag, slide or roll cylinders on their sides. Use a suitable hand
truck to move gas containers. Use a pressure reducing regulator when connecting container to
piping or systems. Never insert an object (e.g. wrench, screwdriver, pry bar) into cap openings.
Use an adjustable strap wrench to remove over -tight or rusted caps. Open valve slowly. Do not
use gas directly from containers. Do not heat container by any means to increase the discharge
rate of product from the container.
Avoid breathing gas. Use only outdoors or in a well -ventilated area. Avoid contact with eyes, skin,
and clothing. Wash hands thoroughly after handling. Avoid release to the environment. Observe
good industrial hygiene practices. Wear appropriate personal protective equipment. Use personal
protection as recommended in Section 8 of the SDS.
Conditions for safe storage, Store locked up. Store in a cool, dry place out of direct sunlight. Store in original tightly closed
including any incompatibilities container. Store in a well -ventilated place. Store in cool place. Refrigeration recommended. Do not
store near combustible materials. Keep away from food, drink and animal feedingstuffs. Store
away from incompatible materials (see Section 10 of the SDS). Store in accordance with NFPA
430 requirements for Class II oxidizers.
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components Type Value
Chlorine (CAS 7782-50-5)
Ceiling
3 mg/m3
1 ppm
US. ACGIH Threshold Limit Values
Components
Type
Value
Chlorine (CAS 7782-50-5)
STEL
0.4 ppm
TWA
0.1 ppm
Chlorine - Chlorine Liquefied Gas Under Pressure SDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 3/8
US. NIOSH: Pocket Guide to Chemical Hazards
Components Type
Chlorine (CAS 7782-50-5)
Ceiling
Value
1.45 mg/m3
0.5 ppm
Biological limit values
No biological exposure limits noted for the ingredient(s).
Appropriate engineering
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
controls
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency
shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier. Be aware that the liquid may penetrate the gloves. Frequent change is advisable.
Skin protection
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
considerations as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash
work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Form
Color
Odor
Odor threshold
pH
Melting point/freezing point
Initial boiling point and boiling
range
Flash point
Gas.
Compressed liquefied gas.
Greenish yellow.
Pungent.
Not available.
Not available.
-149.8 °F (-101 °C)
-29.3 °F (-34 °C) at 1 (atmosphere)
Not available.
Evaporation rate
Not available.
Flammability (solid, gas)
Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower
Not available.
N
Flammability limit - upper
Not available.
N
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
Vapor density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto -ignition temperature
4800 mmHg (77 °F (25 °C))
Not available.
Slightly soluble in water.
Not available.
Not available.
Chlorine - Chlorine Liquefied Gas Under Pressure SDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 4/8
Decomposition temperature Not available.
Viscosity Not available.
10. Stability and reactivity
Reactivity
Greatly increases the burning rate of combustible materials.
Chemical stability
Material is stable under normal conditions.
Possibility of hazardous
Reacts violently with water or moist air to form hydrogen chloride.
reactions
Conditions to avoid
Keep away from combustible material. Contact with incompatible materials.
Incompatible materials
Combustible material. Reducing agents. Ammonia. Alcohols. Water.
Hazardous decomposition
Chlorine reacts with water and generate hydrogen chloride.
products
11. Toxicological information
Information on likely routes of exposure
Inhalation Fatal if inhaled. May cause irritation to the respiratory system.
Skin contact Causes skin irritation.
Eye contact Causes serious eye irritation.
Ingestion Causes digestive tract burns. However, ingestion is not likely to be a primary route of occupational
exposure.
Symptoms related to the May cause central nervous system effects. Dizziness. Headache. Nausea, vomiting. Severe eye
physical, chemical and irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin
toxicological characteristics irritation. May cause redness and pain. May cause respiratory irritation. Coughing.
Information on toxicological effects
Acute toxicity Fatal if inhaled.
Components
Chlorine (CAS 7782-50-5)
Acute
Inhalation
LC50
Skin corrosion/irritation
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Respiratory sensitization
Skin sensitization
Germ cell mutagenicity
Species
Rat
Causes skin irritation.
Causes serious eye irritation.
Not available.
Test Results
293 ppm, 1 Hours
This product is not expected to cause skin sensitization.
No data available to indicate product or any components present at greater than 0.1 % are
mutagenic or genotoxic.
Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
IARC Monographs. Overall Evaluation of Carcinogenicity
Not listed.
NTP Report on Carcinogens
Not listed.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)
Not listed.
Reproductive toxicity This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity -
single exposure
Specific target organ toxicity -
repeated exposure
Aspiration hazard
12. Ecological information
Ecotoxicity
May cause respiratory irritation.
Not classified.
Not available.
Very toxic to aquatic life.
Chlorine - Chlorine Liquefied Gas Under Pressure SIDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 5/8
Persistence and degradability No data is available on the degradability of this product.
Bioaccumulative potential No data available.
Mobility in soil
No data available.
Other adverse effects
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions
Consult authorities before disposal. Do not allow this material to drain into sewers/water supplies.
Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of
contents/container in accordance with local/regional/national/international regulations.
Local disposal regulations
Dispose in accordance with all applicable regulations.
Hazardous waste code
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Waste from residues / unused
Dispose of in accordance with local regulations.
products
Contaminated packaging
Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied.
14. Transport information
DOT
UN number
UN1017
UN proper shipping name
Chlorine
Transport hazard class(es)
Class
2.3
Subsidiary risk
5.1, 8
Label(s)
2.3, 5.1, 8
Packing group
Not applicable.
Environmental hazards
Marine pollutant
Yes
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Special provisions
2, B9, B14, N86, T50, TP19
Packaging exceptions
None
Packaging non bulk
304
Packaging bulk
314,315
IATA
UN number
UN1017
UN proper shipping name
Chlorine
Transport hazard class(es)
Class
2.3
Subsidiary risk
5.1, 8
Label(s)
2.3, 5.1, 8
Packing group
Not applicable.
Environmental hazards
Yes
ERG Code
2CP
Special precautions for user
Passenger and Cargo Aircraft Quantity limitation: Forbidden.
IMDG
UN number
UN1017
UN proper shipping name
CHLORINE
Transport hazard class(es)
Class
2.3
Subsidiary risk
5.1, 8
Label(s)
2.3, 5.1, 8
Packing group
Not applicable.
Environmental hazards
Marine pollutant
Yes
EmS
F-C, S-U
Special precautions for user
Read safety instructions, SDS and emergency procedures before handling.
Chlorine - Chlorine Liquefied Gas Under Pressure SDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 6/8
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
US federal regulations This product is a "Hazardous Chemical' as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Chlorine (CAS 7782-50-5) Listed.
SARA 304 Emergency release notification
CHLORINE (CAS 7782-50-5) 10 LBS
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1063)
Not listed.
Toxic Substances Control Act (TSCA) This substance is not on the TSCA 8(b) inventory or is designated
"inactive".
Superfund Amendments and Reauthorization Act of 1986 (SARA)
SARA 302 Extremely hazardous substance
Chemical name CAS number Reportable Threshold Threshold Threshold
quantity planning quantity planning quantity, planning quantity,
(pounds) (pounds) lower value upper value
(pounds) (pounds)
Chlorine
SARA 311/312 Hazardou
chemical
Classified hazard
categories
7782-50-5 10
s Yes
SARA 313 (TRI reporting)
Chemical name
Chlorine
100
Oxidizer (liquid, solid, or gas)
Gas under pressure
Acute toxicity (any route of exposure)
Skin corrosion or irritation
Serious eye damage or eye irritation
Specific target organ toxicity (single or repeated exposure)
CAS number % by wt.
7782-50-5 > 99
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Chlorine (CAS 7782-50-5)
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Chlorine (CAS 7782-50-5)
Safe Drinking Water Act Contains component(s) regulated under the Safe Drinking Water Act.
(SDWA)
Chlorine - Chlorine Liquefied Gas Under Pressure SDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 7/8
US state regulations This chemical is a pesticide product registered by the Environmental Protection Agency and is
subject to certain labeling requirements under federal pesticide law. These requirements differ
from the classification criteria and hazard information required for safety data sheets, and for
workplace labels of non -pesticide chemicals. Following is the hazard information as required on
the pesticide label:
DANGER/POISON
Keep out of reach of children.
Liquefied Gas Under Pressure.
Non-flammable.
Fatal if inhaled.
Liquid causes severe burns.
Hazardous to Humans and domestic animals.
Corrosive. Causes irreversible eye damage and skin burns.
Fatal if swallowed inhaled or absorbed through skin.
Harmful if swallowed.
Do not swallow or inhale.
This product is toxic or highly toxic to fish and aquatic invertebrates to fish and wildlife.
Chlorine is a Non-flammable gas, liquefied, under pressure.
US. Massachusetts RTK - Substance List
Chlorine (CAS 7782-50-5)
US. New Jersey Worker and Community Right -to -Know Act
Chlorine (CAS 7782-50-5)
US. Pennsylvania Worker and Community Right -to -Know Law
Chlorine (CAS 7782-50-5)
US. Rhode Island RTK
Chlorine (CAS 7782-50-5)
California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 2016 (Proposition 65): This material
is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. For
more information go to www.P65Warnings.ca.gov.
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3,
subd. (a))
Chlorine (CAS 7782-50-5)
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date
Revision date
Version #
NFPA ratings
05-August-2014
5/20/2020
02
D
ox
Disclaimer The information contained herein is accurate to the best of our knowledge. However, data, safety
standards and government regulations are subject to change and, therefore, holders and users
should satisfy themselves that they are aware of all current data and regulations relevant to their
particular use of product. ALEXANDER CHEMICAL CORPORATION DISCLAIMS ALL LIABILITY
FOR RELIANCE ON THE COMPLETENESS OR ACCURACY OR THE INFORMATION
INCLUDED HEREIN. ALEXANDER CHEMICAL CORPORATION MAKES NO WARRANTY,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF
MERCHANTIABILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE OF THE PRODUCT
DESCRIBED HEREIN. All conditions relating to storage, handling, and use of the product are
beyond the control of Alexander Chemical Corporation, and shall be the sole responsibility of the
holder or user of the product.
Chlorine - Chlorine Liquefied Gas Under Pressure SIDS US
921762 Version #: 02 Revision date: 05/20/2020 Issue date: 05-August-2014 8/8
3/31 /2021
Listing Category Search Page I NSF International
The Public Health and Safety Organization
NSF Product and Service Listings
These NSF Official Listings are current as of Wednesday, March 31, 2021 at 12:15 a.m. Eastern Time. Please
contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this
information by clicking on the below link for the most accurate information:
http://info.nsf.org/Certified/PwsClic,niicalslLi�stings.as ?Comp :ina:--j746o&Standard=oho&
NSF/ANSI/CAN Go
Drinking Water Treatment Chemicals - Health
Effects
Alexander Chemical
Corporation
7593 South First Road
Kingsbury Industrial Park
Kingsbury, IN 46345
United States
800-445-9458
630-955-6050
Facility :Kingsbury, IN
Ammonia, Anhydrous
Trade Designation
Anhydrous Ammonia
Ammonium Hydroxide
Trade Designation
Ammonium Hydroxide
Chlorine [CL]
Trade Designation
Chlorine
Product Function Max Use
Chloramination 5 mg/L
Product Function Max Use
Chloramination 10 mg/L
Product Function Max Use
Disinfection & Oxidation 30 mg/L
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 1/3
3/31/2021 Listing Category Search Page I NSF International
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
Hydrofluosilicic Acid
Trade Designation Product Function Max Use
Fluosilicic Acid - Water Treatment Grade Fluoridation 5 mg/L
Hydrofluosilicic Acid - Water Treatment Grade Fluoridation 5 mg/L
Sodium Sisulfite[i]
Trade Designation Product Function Max Use
Sodium Bisulfite Solution, 38% Dechlorination 46mg/L
[1] This product contains sulfite.
Sulfites have been known to cause potentially lethal
allergic reactions in sulfite -sensitive individuals.
The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
Sodium Hydroxide
Trade Designation
Caustic Soda -Liquid
Sodium Hydroxide -Liquid (Diaphragm Cell)
Sodium Hydroxide -Liquid (Membrane Cell)
Sodium Hypochlorite[CL]
Trade Designation
12.5% Sodium Hypochlorite
Liquid Bleach
Liquid Bleach 15
Sodium Hypochlorite 12.5%
Sodium Hypochlorite 15%
Product Function
Max Use
Corrosion & Scale Control
10o mg/L
pH Adjustment
Corrosion & Scale Control
too mg/L
pH Adjustment
Corrosion & Scale Control
10o mg/L
pH Adjustment
Product Function
Max Use
Disinfection & Oxidation
84mg/L
Disinfection & Oxidation
84 mg/L
Disinfection & Oxidation
67mg/L
Disinfection & Oxidation
84 mg/L
Disinfection & Oxidation
67mg/L
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
Sulfuric Acid
Trade Designation
Product Function
Max Use
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 2/3
3/31/2021
Sulfuric Acid
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was o seconds
Listing Category Search Page I NSF International
Corrosion & Scale Control 50 mg/L
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 3/3
E
PRODUCT SPECIFICATION SHEET
HYDROFLUOSILICIC ACID ANDER
ALEXANDER CHEMICAL COPPOPATION Effective 01 /11 /2021
Chemical Properties:
CAS#:
Chemical formula:
Molecular weight:
Hydrofluosilicic acid, %:
Hydrofluoric acid (HF), %:
Heavy metals as lead, ppm:
Color:
16961-83-4
H2SiF6
144.06
23.00 - 25.00
1 Maximum
200.00 maximum
25 APHA maximum
Physical Properties:
Boiling point, OF:
Freezing point, OF:
Specific gravity @ 60 OF:
Vapor pressure, mm Hg @ 167 OF
pH:
Appearance:
Odor:
Solubility in water:
225.00
- 4.00
1.223 @ 25.00 %
218
1.2
White to Straw Yellow
Sour, pungent
Complete
NSF International maximum use: 5.00 milligrams per liter
Packaged by:
Alexander Chemical Corporation
7593 South First Road
La Porte, Indiana 46350
800-348-8827
SAFETY DATA SHEET
1. Identification
Product identifier Hydrofluosilicic acid
Other means of identification
Synonyms Fluorosilicic acid, Hydrofluorosilicic acid
Recommended use Hydrofluosilicic acid is an acid used in water treatment application.
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Company name Alexander Chemical Corporation
7593 S. First Road,
Address Kingsbury Industrial Park, USA
Fax 219-393-5364
Website www.alexanderchemical.com
Contact Person Keith Bonner
Telephone (800) 348-8827 - non -emergency inquiries only
Emergency telephone
number
For Hazardous Materials [or Dangerous Goods] Incidents ONLY
(spill, leak, fire, exposure or accident), call CHEMTREC at
CHEMTRECO, USA: 001 (800) 424-9300
CHEMTRECO, Mexico (Toll -Free - must be dialed from within country):
001-800-13-203-9987
CHEMTRECO, Other countries: 001 (703) 527-388
2. Hazard(s) identification
Physical hazards Acute toxicity, oral Category 4
Health hazards Skin corrosion/irritation Category 1 B
Serious eye damage/eye irritation Category 1
Not classified.
OSHA defined hazards
Label elements
0< •
Signal word Danger
Hazard statement Harmful if swallowed. Causes severe skin burns and eye damage.
Precautionary statement
Prevention Do not breathe mist. Do not eat, drink or smoke when using this product. Wear protective
gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling.
Hydrofluosilicic acid SDS US
920631v Version #: 01 Revision date: 5/20/20 Issue date: 28-January-2015 1 / 8
Response
If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all
contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If
inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse
cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. Immediately call a poison center/doctor.
Storage
Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
None known.
classified (HNOC)
3. Composition/information on ingredients
Substances
Chemical name
Common name and CAS number %
synonyms
Hydrofluorosilicic acid
16961-83-4 24
Composition comments
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume.
4. First -aid measures
Inhalation
Move injured person into fresh air and keep person calm under observation. Get medical attention
if symptoms occur.
Skin contact
Immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing
and shoes. Get medical attention immediately. Chemical burns must be treated by a physician.
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Hold eyelids apart. Continue rinsing. Get medical attention immediately.
Ingestion
Rinse mouth thoroughly with water and give large amounts of milk or water to people not
unconscious. Do not induce vomiting. If vomiting occurs, the head should be kept low so that
stomach vomit doesn't enter the lungs. Obtain medical attention and take along these instructions.
Most important
Corrosive. Prolonged contact causes serious eye and tissue damage. May cause burns in mucous
symptoms/effects, acute and
membranes, throat, esophagus and stomach. May cause lung edema. Symptoms may be delayed.
delayed
Indication of immediate
In case of shortness of breath, give oxygen. Keep victim warm. Keep victim under observation.
medical attention and special
Symptoms may be delayed.
treatment needed
General information
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Wash contaminated clothing before reuse.
5. Fire -fighting measures
Suitable extinguishing media
Use fire -extinguishing media appropriate for surrounding materials.
Unsuitable extinguishing
Do not use waterjet as an extinguisher, as this will spread the fire.
media
Specific hazards arising from
Fire may produce irritating, corrosive and/or toxic gases.
the chemical
Special protective equipment
Firefighters should wear full protective clothing including self contained breathing apparatus.
and precautions for firefighters
Structural firefighters protective clothing will only provide limited protection.
Fire -fighting
Use standard firefighting procedures and consider the hazards of other involved materials. Use
equipment/instructions
water spray to cool unopened containers. Cool containers with flooding quantities of water until
well after fire is out. Prevent runoff from fire control or dilution from entering streams, sewers, or
drinking water supply.
6. Accidental release measures
Personal precautions,
Keep unnecessary personnel away. Local authorities should be advised if significant spillages
protective equipment and
cannot be contained. Stay upwind. Keep out of low areas. Ensure adequate ventilation. Avoid
emergency procedures
contact with eyes, skin, and clothing. Avoid breathing mist or vapor. Use personal protection
recommended in Section 8 of the SIDS.
Hydrofluosilicic acid
SDS US
920631 v Version #: 01 Revision date:
5/20/20 Issue date: 28-January-2015 2/8
Methods and materials for
Should not be released into the environment.
containment and cleaning up
Large Spills: Dike far ahead of liquid spill for later disposal. Use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Small Spills: Absorb spill with vermiculite or other inert material. Clean contaminated surface
thoroughly. After removal flush contaminated area thoroughly with water.
Never return spills in original containers for re -use.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not contaminate water
7. Handling and storage
Precautions for safe handling
Handle and open container with care. Use only with adequate ventilation. Avoid contact with skin,
eyes and clothing. Avoid breathing mist or vapor Wash thoroughly after handling. Observe good
industrial hygiene practices.
Conditions for safe storage,
Keep in a well -ventilated place. Keep containers tightly closed in a dry, cool and well -ventilated
including any incompatibilities
place. Keep this material away from food, drink and animal feed. Use care in handling/storage.
Transfer and storage systems should be compatible and corrosion resistant.
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Components Type Value
Hydrofluorosilicic acid (CAS PEL 2.5 mg/m3
16961-83-4)
US. OSHA Table Z-2 (29 CFR 1910.1000)
Components Type Value Form
Hydrofluorosilicic acid (CAS TWA 2.5 mg/m3 Dust.
16961-83-4)
US. ACGIH Threshold Limit Values
Components Type Value
Hydrofluorosilicic acid (CAS TWA 2.5 mg/m3
16961-83-4)
US. NIOSH: Pocket Guide to Chemical Hazards
Components Type Value
Hydrofluorosilicic acid (CAS TWA 2.5 mg/m3
16961-83-4)
Biological limit values
ACGIH Biological Exposure Indices
Components Value Determinant Specimen Sampling Time
Hydrofluorosilicic acid (CAS 3 mg/I Fluoride Urine
16961-83-4)
2 mg/1 Fluoride Urine
* - For sampling details, please see the source document.
Appropriate engineering Provide adequate ventilation. Observe Occupational Exposure Limits and minimize the risk of
controls inhalation of vapors. Eye wash facilities and emergency shower must be available when handling
this product.
Individual protection measures, such as personal protective equipment
Eye/face protection Wear approved safety glasses or goggles.
Skin protection
Hand protection Wear protective gloves. Be aware that the liquid may penetrate the gloves. Frequent change is
advisable. Suitable gloves can be recommended by the glove supplier.
Other Wear appropriate chemical resistant clothing. Protective shoes or boots. Structural firefighters
protective clothing provides limited protection in fire situations ONLY; it is not effective in spill
situations. Wear chemical protective equipment that is specifically recommended by the Personal
Protective Equipment manufacturer.
Hydrofluosilicic acid SIDS US
920631v Version #: 01 Revision date: 5/20/20 Issue date: 28-January-2015 3/8
Respiratory protection If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn. In case of inadequate ventilation or risk
of inhalation of mist, use suitable respiratory equipment with particle filter. In the United States of
America, if respirators are used, a program should be instituted to assure compliance with OSHA
29 CFR 1910.134 and ANSI Z88.2.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene When using, do not eat, drink or smoke. Wash hands before breaks and immediately after
considerations handling the product. Remove and isolate contaminated clothing and shoes. Handle in accordance
with good industrial hygiene and safety practice. Launder contaminated clothing before reuse.
9. Physical and chemical properties
Appearance White to straw yellow solution.
Physical state Liquid.
Form Liquid.
Color White to straw yellow.
Odor Pungent, sour penetrating odor.
Odor threshold Not available.
pH 1.2
Melting point/freezing point -4 °F (-20 °C)
Initial boiling point and boiling 225 °F (107.22 °C)
range
Flash point Not available.
Evaporation rate Not available.
Flammability (solid, gas)
Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower
Not available.
N
Flammability limit - upper
Not available.
N
Vapor pressure
218 mm Hg (100 °F / 38 °C)
Vapor density
Not available.
Relative density
1.22 t 0.03
Relative density temperature
77 °F (25 °C)
Solubility(ies)
Solubility (water)
Completely soluble in water.
Partition coefficient
No data available.
(n-octanol/water)
Auto -ignition temperature
Not available.
Decomposition temperature
Not available.
Viscosity
Not available.
Other information
VOC (Weight %)
Not available
10. Stability and reactivity
Reactivity The product is non -reactive under normal conditions of use, storage and transport.
Chemical stability Stable at normal conditions.
Possibility of hazardous Contact with metals may evolve flammable hydrogen gas.
reactions
Conditions to avoid Keep away from water, steam or other incompatible materials.
Incompatible materials Glass. Stoneware. Metals. Bases.
Hazardous decomposition Hydrogen fluoride. Silicon tetrafluoride. Hydrogen gas.
products
Hydrofluosilicic acid
920631v Version #: 01 Revision date: 5/20/20 Issue date: 28-January-2015
SDS US
4/8
11. Toxicological information
Information on likely routes of exposure
Ingestion Harmful if swallowed. Causes digestive tract burns.
Inhalation Causes respiratory tract burns. May cause lung edema.
Skin contact Causes severe skin burns.
Eye contact Causes severe eye burns.
Symptoms related to the Corrosive. Prolonged contact causes serious eye and tissue damage. May cause burns in
physical, chemical and mucous membranes, throat, esophagus and stomach. May cause lung edema. Symptoms may be
toxicological characteristics delayed.
Information on toxicological effects
Acute toxicity
Components
Harmful if swallowed.
Species
Hydrofluorosilicic acid (CAS 16961-83-4)
Acute
Oral
LD50
Skin corrosion/irritation
Serious eye damage/eye
irritation
Rat
Causes severe skin burns.
Causes severe eye damage.
Respiratory or skin sensitization
Respiratory sensitization
No data available.
Skin sensitization
No data available.
Germ cell mutagenicity
No data available.
Carcinogenicity
No data available.
OSHA Specifically Regulated
Substances (29 CFR 1910.1001-1050)
Not listed.
Reproductive toxicity No data available.
Specific target organ toxicity - No data available.
single exposure
Specific target organ toxicity - No data available.
repeated exposure
Aspiration hazard No data available.
Test Results
430 mg/kg
Chronic effects
Prolonged overexposure to fluorides may increase fluoride content of bones and teeth, and may
result in fluorosis, with mottling of teeth (in children) and brittleness of bones. Absorbed fluoride
can cause metabolic imbalances with irregular heartbeat, nausea, dizziness, vomiting and
seizures. Risk of hypocalcemia with nervous problems (tetany) and cardiac arrhythmia.
12. Ecological information
Ecotoxicity
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Persistence and degradability
No data available.
Bioaccumulative potential
No data available.
Mobility in soil
The product is water soluble and may spread in water systems.
Other adverse effects
The product may affect the acidity (pH -factor) in water with risk of harmful effects to aquatic
organisms.
13. Disposal considerations
Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Dispose of contents/container in accordance with
local/regional/national/international regulations. Dispose in accordance with all applicable
regulations.
Hazardous waste code D002: Waste Corrosive material [pH —2 or=>12.5, or corrosive to steel]
Waste codes should be assigned by the user based on the application for which the product was
used.
Hydrofluosilicic acid SIDS US
920631 v Version #: 01 Revision date: 5/20/20 Issue date: 28-January-2015 5/8
Waste from residues / unused Dispose of in accordance with local regulations.
products
Contaminated packaging Dispose of in accordance with local regulations. Since emptied containers may retain product
residue, follow label warnings even after container is emptied.
14. Transport information
DOT
UN number
UN1778
UN proper shipping name
Fluorosilicic acid
Transport hazard class(es)
Class
8
Subsidiary risk
-
Label(s)
8
Packing group
II
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Special provisions
A6, A7, 132, B15, 1132, N3, N34, T8, TP2, TP12
Packaging exceptions
None
Packaging non bulk
202
Packaging bulk
242
DOT BULK
BULK
UN number
UN1778
UN proper shipping name
Fluorosilicic acid
Transport hazard class(es)
Class
8
Label(s)
8
Packing group
II
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Special provisions
A6, A7, 132, B15, I132, N3, N34, T8, TP2, TP12
Packaging exceptions
None
Packaging non bulk
202
Packaging bulk
242
IATA
UN number
UN1778
UN proper shipping name
Fluorosilicic acid
Transport hazard class(es)
Class
8
Subsidiary risk
-
Label(s) Packing
8
group Environmental
II
hazards ERG Code
No.
8L
Special precautions for user Read safety instructions, SIDS and emergency procedures before handling.
IMDG
UN number
UN1778
UN proper shipping name
FLUOROSILICIC ACID
Transport hazard class(es)
Class
8
Subsidiary risk
-
Label(s) Packing
8
group Environmental
II
hazards
Marine pollutant
No.
Ems
F-A, S-B
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Transport in bulk according to
This product is a liquid and when transported in bulk is covered under MARPOL 73/78 Annex 11.
Annex II of MARPOL 73/78 and
This product is listed in the IBC Code.
the IBC Code
Ship type: 3
Pollution category: Y
Hydrofluosilicic acid SDS US
920631v Version #: 01 Revision date: 5/20/20 Issue date: 28-January-2015 6/8
15. Regulatory information
US federal regulations This product is a "Hazardous Chemical' as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard -Yes
Delayed Hazard - No
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - Yes
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous Yes
chemical
SARA 313 (TRI reporting)
Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act Not regulated.
(SDWA)
US state regulations This product does not contain a chemical known to the State of California to cause cancer, birth
defects or other reproductive harm.
US. Massachusetts RTK - Substance List
Hydrofluorosilicic acid (CAS 16961-83-4)
US. New Jersey Worker and Community Right -to -Know Act
Hydrofluorosilicic acid (CAS 16961-83-4)
US. Pennsylvania Worker and Community Right -to -Know Law
Hydrofluorosilicic acid (CAS 16961-83-4)
US. Rhode Island RTK
Not regulated.
US. California Proposition 65
US - California Proposition 65 - Carcinogens & Reproductive Toxicity (CRT): Listed substance
Not listed.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date 25-July-2014
Revision date Revision date: 5/20/20
Version # 01
Hydrofluosilicic acid
920631v Version #: 01 Revision date: 5/20/20 Issue date: 28-January-2015
SDS US
7/8
NFPA ratings
a
References Registry of Toxic Effects of Chemical Substances (RTECS)
GESTIS Substance Database
US. IARC Monographs on Occupational Exposures to Chemical Agents
Disclaimer The information contained herein is accurate to the best of our knowledge. However, data, safety
standards and government regulations are subject to change and, therefore, holders and users
should satisfy themselves that they are aware of all current data and regulations relevant to their
particular use of product. ALEXANDER CHEMICAL CORPORATION DISCLAIMS ALL LIABILITY
FOR RELIANCE ON THE COMPLETENESS OR ACCURACY OR THE INFORMATION
INCLUDED HEREIN. ALEXANDER CHEMICAL CORPORATION MAKES NO WARRANTY,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF
MERCHANTIABILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE OF THE PRODUCT
DESCRIBED HEREIN. All conditions relating to storage, handling, and use of the product are
beyond the control of Alexander Chemical Corporation, and shall be the sole responsibility of the
holder or user of the product.
Hydrofluosilicic acid
920631v Version #: 01 Revision date: 5/20120 Issue date: 28-January-2015
SDS US
8/8
3/31/2021
Listing Category Search Page I NSF International
The Public Health and Safety Organization
NSF Product and Service Listings
These NSF Official Listings are current as of Wednesday, March 31, 2021 at 12:15 a.m. Eastern Time. Please
contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this
information by clicking on the below link for the most accurate information:
httF:L/hifo.nsf.org/Certified/PwsChemicals/l.istiaa gs. asp?C:ornpany:1746o&Standard=o62&
NSF/ANSI/CAN Ga
Drinking Water Treatment Chemicals - Health
Effects
Alexander Chemical
Corporation
7593 South First Road
Kingsbury Industrial Park
Kingsbury, IN 46345
United States
800-445-9458
630-955-6050
Facility: Kingsbury, IN
Ammonia, Anhydrous
Trade Designation
Anhydrous Ammonia
Ammonium Hydroxide
Trade Designation
Ammonium Hydroxide
Chlorine[CL]
Trade Designation
Chlorine
Product Function Max Use
Chloramination 5 mg/L
Product Function Max Use
Chloramination 10 mg/L
Product Function Max Use
Disinfection & Oxidation 30 mg/L
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 1/3
3/31/2021 Listing Category Search Page I NSF International
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
Hydrofluosilicic Acid
Trade Designation Product Function Max Use
Fluosilicic Acid - Water Treatment Grade Fluoridation 5 mg/L
Hydrofluosilicic Acid - Water Treatment Grade Fluoridation 5 mg/L
Sodium Bisulfite[i]
Trade Designation Product Function Max Use
Sodium Bisulfite Solution, 38% Dechlorination 46mg/L
[1] This product contains sulfite.
Sulfites have been known to cause potentially lethal
allergic reactions in sulfite -sensitive individuals.
The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
Sodium Hydroxide
Trade Designation
Caustic Soda -Liquid
Sodium Hydroxide -Liquid (Diaphragm Cell)
Sodium Hydroxide -Liquid (Membrane Cell)
Sodium Hypochlorite[CL]
Trade Designation
12.5% Sodium Hypochlorite
Liquid Bleach
Liquid Bleach 15
Sodium Hypochlorite 12.5
Sodium Hypochlorite 15%
Product Function
Max Use
Corrosion & Scale Control
too mg/L
pH Adjustment
Corrosion & Scale Control
too mg/L
pH Adjustment
Corrosion & Scale Control
too mg/L
pH Adjustment
Product Function
Max Use
Disinfection & Oxidation
84mg/L
Disinfection & Oxidation
84 mg/L
Disinfection & Oxidation
67mg/L
Disinfection & Oxidation
84 mg/L
Disinfection & Oxidation
67mg/L
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
Sulfuric Acid
Trade Designation
Product Function
Max Use
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 2/3
3/31 /2021
Sulfuric Acid
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was o seconds
Listing Category Search Page I NSF International
Corrosion & Scale Control 50 mg/L
https://Info.nsf.org/Certified/PwsChemlcals/Listings.asp?Company=17460&Standard=060 3/3
PRODUCT SPECIFICATION SHEET
EANDER
Sulfur Dioxide
Effective 07/05/2018
ALEMEP CHEMICAL COpPOPATiON
Chemical Properties:
CAS#:
7446-09-5
Chemical formula:
SOz
Sulfur Dioxide, weight W
99.9 Minimum
Moisture, ppm:
100.00 Maximum
Sulfuric acid, ppm:
25.00 Maximum
Non-volatile residue ppm:
100.00 Maximum
Physical Properties:
Boiling point:
14 OF
Freezing point:
- 104 OF
Specific gravity (Gas), g/mL
2.25 @ 32 OF
Specific gravity (Liquid), g/mL:
1.43 @ 32/39 OF
Vapor pressure, psig:
28 @ 60 OF
Appearance:
Colorless
Odor:
Suffocating, pungent odor
Packaged by:
Alexander Chemical Corporation
7593 South First Road
La Porte, Indiana 46350
800-348-8827
SAFETY DATA SHEET
-'-so
1. Identification
Product identifier Sulfur dioxide
Other means of identification
CAS number 7446-09-5
Recommended use Chemical feedstock. Industrial applications.
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Supplier
Company name Carus Corporation
Address 315 5th Street
Peru, Illinois 61354, USA
Telephoine (815) 223-1500
Toll Free (800) 435-6856
Fax (815) 224-6816
E-mail salesmkt@caruscorporation.com
Website www.caruscorporation.com
Company name ALEXANDER CHEMICAL CORPORATION
Address 7593 S First Road, LaPorte, IN 46350
Contact name Ryan Craft
Telephone 800-348-8827- All other non -emergency inquiries about the product should be directed to the
company
Emergency telephone For Hazardous Materials [or Dangerous Goods] Incidents ONLY
number
(spill, leak, fire, exposure or accident), call CHEMTREC at
CHEMTREC@, USA: 001 (800) 424-9300
CHEMTREC@, Mexico (Toll -Free - must be dialed from within country):
001-800-13-203-9987
CHEMTREC@, Other countries: 001 (703) 527-388
2. Hazard(s) identification
Physical hazards Gases under pressure Liquefied gas
Health hazards Acute toxicity, inhalation Category 3
Skin corrosion/irritation Category 1 B
Serious eye damage/eye irritation Category 1
OSHA defined hazards Not classified.
Label elements
Signal word Danger
Hazard statement Contains gas under pressure; may explode if heated. Toxic if inhaled. Causes severe skin burns
and eye damage.
Precautionary statement
Prevention Do not breathe gas. Use only outdoors or in a well -ventilated area. Wear protective
gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling.
Sulfur dioxide SIDS US
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014 1 / 8
Response
If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all
contaminated clothing. Rinse skin with water/shower. If in eyes: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If inhaled:
Remove person to fresh air and keep comfortable for breathing. Immediately call a poison
center/doctor. Wash contaminated clothing before reuse.
Storage
Protect from sunlight. Store in a well -ventilated place. Keep container tightly closed. Store locked
up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
None known.
classified (HNOC)
Supplemental information
None.
3. Composition/information on ingredients
Substances
Chemical name Common name and CAS number %
synonyms
Sulfur dioxide
7446-09-5 100
Composition comments
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume.
4. First -aid measures
Inhalation
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Call a physician or poison control center immediately.
Skin contact
Frostbite: Do not remove clothes, but flush with copious amounts of lukewarm water. Call an
ambulance and continue to flush during transportation to hospital.
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Ingestion
Call a physician or poison control center immediately. DO NOT induce vomiting. If victim is fully
conscious, give a cupful of water. Never give anything by mouth to an unconscious person. If
vomiting occurs, keep head lower than the hips to help prevent aspiration. This material is a gas
under normal atmospheric conditions and ingestion is unlikely.
Most important
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms include
symptoms/effects, acute and
itching, burning, redness, and tearing of eyes. Permanent eye damage including blindness could
delayed
result. Contact with liquefied gas may cause frostbite. Be aware that symptoms of lung edema
(shortness of breath) may develop up to 24 hours after exposure.
Indication of immediate
Provide general supportive measures and treat symptomatically.
medical attention and special
treatment needed
6. Fire -fighting measures
Suitable extinguishing media Carbon dioxide or dry powder.
Unsuitable extinguishing Do not use a solid water stream as it may scatter and spread fire.
media
Specific hazards arising from By heating and fire, harmful vapors/gases may be formed. Carbon oxides. Sulfur oxides.
the chemical
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters Selection of respiratory protection for firefighting: follow the general fire precautions indicated in
the workplace.
Fire fighting Evacuate area. Allow gas to burn if flow cannot be shut off immediately. Apply water from safe
equipment/instructions distance to cool container and protect surrounding area.
6. Accidental release measures
Personal precautions,
Evacuate the area promptly. No action shall be taken involving any personal risk or without
protective equipment and
suitable training. Keep unnecessary personnel away.
emergency procedures
Ensure adequate ventilation. In case of inadequate ventilation, use respiratory protection. For
personal protection, see Section 8 of the SIDS.
Methods and materials for
Ventilate well, stop flow of gas or liquid if possible. Immediately contact emergency personnel. For
containment and cleaning up
waste disposal, see Section 13 of the SDS.
Environmental precautions Should not be released into the environment. Prevent further leakage or spillage if safe to do so.
Prevent from entering into soil, ditches, sanitary sewers, waterways and/or groundwater.
Sulfur dioxide SIDS US
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014 2/8
7. Handling and storage
Precautions for safe handling
Use only with adequate ventilation. Do not breathe gas. Do not get in eyes, on skin, on clothing.
Wear appropriate personal protective equipment (See Section 8). Wash thoroughly after handling.
Wash contaminated clothing before reuse. Eating, drinking, and smoking should be prohibited in
areas where this material is handled, stored, and processed. Observe good industrial hygiene
practices.
Conditions for safe storage,
Store locked up. Store in a cool, dry, well -ventilated place. Secure cylinders in an upright position
including any incompatibilities
at all times, close all valves when not in use. Keep container tightly closed and sealed until ready
for use. Protect cylinders from damage. Protect from sunlight. Store away from incompatible
materials (See Section 10).
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Material Type Value
Sulfur dioxide (CAS PEL 13 mg/m3
7446-09-5)
5 ppm
US. ACGIH Threshold Limit Values
Material Type Value
Sulfur dioxide (CAS
7446-09-5)
STEL
US. NIOSH: Pocket Guide to Chemical Hazards
Material Type
0.25 ppm
Value
Sulfur dioxide (CAS STEL 13 mg/m3
7446-09-5)
5 ppm
TWA 5 mg/m3
2 ppm
Biological limit values No biological exposure limits noted for the ingredient(s).
Appropriate engineering Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne
controls levels below recommended exposure limits. The engineering controls also need to keep gas,
vapor, or dust concentrations below any lower explosive limits.
Individual protection measures, such as personal protective equipment
Eyelface protection Wear approved safety glasses or goggles.
Skin protection
Hand protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Skin protection
Other Wear protective clothing appropriate for the risk of exposure.
Respiratory protection If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene Do not eat, drink or smoke when using the product. Wash thoroughly after handling. Provide
considerations eyewash station and safety shower. Handle in accordance with good industrial hygiene and safety
practices.
9. Physical and chemical properties
Appearance Colorless gas or liquid.
Physical state Liquid, Gas.
Form Gas or liquid.
Color Colorless.
Odor Pungent.
Odor threshold Not available.
Sulfur dioxide SIDS US
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014 3/8
pH Acidic.
Melting point/freezing point -104 °F (-75.56 °C)
Initial boiling point and boiling 14 °F (-10 °C)
range
Flash point Not available.
Evaporation rate Not available.
Flammability (solid, gas) Non flammable.
Upper/lower flammability or explosive limits
Flammability limit - lower Not available.
M
Flammability limit - upper Not available.
N
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Auto -ignition temperature
Decomposition temperature
Viscosity
10. Stability and reactivity
Reactivity
Chemical stability
Possibility of hazardous
reactions
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
2475 mm Hg (68 °F (20 °C))
2.26 (air = 1) (68 °F (20 °C))
1.36 (77 °F (25 °C))
Moderate soluble in water.
Not available.
Not available.
Not applicable.
The product is non -reactive under normal conditions of use, storage and transport.
Stable under normal temperature conditions and recommended use.
Polymerization will not occur.
In a fire or if heated, a pressure increase will occur and the container may burst or explode.
Contact with incompatible materials.
Alkali metals. Water. Ammonia. Zinc. Aluminum. Copper. Brass. Oxidizing agents.
Sulfur oxides (SOx.).
11. Toxicological information
Information on likely routes of exposure
Inhalation Toxic if inhaled.
Skin contact Causes severe skin burns.
Eye contact Causes serious eye damage.
Ingestion
This material is a gas under normal atmospheric conditions and ingestion is unlikely.
Symptoms related to the
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms include
physical, chemical and
itching, burning, redness, and tearing of eyes. Permanent eye damage including blindness could
toxicological characteristics
result. Contact with liquefied gas may cause frostbite. Be aware that symptoms of lung edema
(shortness of breath) may develop up to 24 hours after exposure.
Information on toxicological effects
Acute toxicity
Toxic if inhaled. Suffocation (asphyxiant) hazard - if allowed to accumulate to concentrations that
reduce oxygen below safe breathing levels. Exposure to rapidly expanding gas or vaporizing liquid
may cause frostbite ('bold burn").
Skin corrosion/irritation
Causes severe skin burns.
Serious eye damage/eye
Causes serious eye damage.
irritation
Respiratory or skin sensitization
Respiratory sensitization No data available.
Skin sensitization No data available.
Germ cell mutagenicity No data available.
Carcinogenicity This product is not considered to be a carcinogen by NTP, IARC, or OSHA.
Sulfur dioxide SDS US
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014 4/8
IARC Monographs. Overall Evaluation of Carcinogenicity
Sulfur dioxide (CAS 7446-09-5) 3 Not classifiable as to carcinogenicity to humans.
NTP Report on Carcinogens
Not listed.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)
Not listed.
Reproductive toxicity No data available.
Specific target organ toxicity -
No data available.
single exposure
Specific target organ toxicity -
No data available.
repeated exposure
Aspiration hazard
Not classified.
12. Ecological information
Ecotoxicity
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Persistence and degradability
No data available.
Bioaccumulative potential
No data available.
Mobility in soil
The product is water soluble and may spread in water systems.
Other adverse effects
None known.
13. Disposal considerations
Disposal instructions Dispose in accordance with all applicable regulations. Empty containers may contain product
residues. Do not puncture or incinerate even when empty. This material and/or its container must
be disposed of as hazardous waste. Return the empty cylinder to the supplier.
Hazardous waste code Waste codes should be assigned by the user based on the application for which the product was
used.
Waste from residues / unused Dispose of in accordance with local regulations.
products
Contaminated packaging Since emptied cylinders may retain product residue, follow label warnings even after cylinder is
emptied.
14. Transport information
DOT
UN number
UN1079
UN proper shipping name
Sulfur dioxide
Transport hazard class(es)
Class
2.3
Subsidiary risk
8
Packing group
Not applicable.
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Special provisions
3, 1314, T50, TP19
Packaging exceptions
None
Packaging non bulk
304
Packaging bulk
314,315
IATA
UN number
UN1079
UN proper shipping name
Sulphur dioxide
Transport hazard class(es)
Class
2.3
Subsidiary risk
8
Label(s)
2.3, 8
Packing group
Not applicable.
Environmental hazards
No
ERG Code
2CP
Special precautions for user
Read safety instructions, SDS and emergency procedures before handling.
IMDG
UN number
UN1079
UN proper shipping name
SULPHUR DIOXIDE
Sulfur dioxide SDS US
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014 5/8
Transport hazard class(es)
Class
2.3
Subsidiary risk
8
Label(s)
2.3, 8
Packing group
Not applicable.
Environmental hazards
Marine pollutant
No
EmS
F-C, S-U
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Transport in bulk according to
Not applicable. This product is a compressed or liquefied gas and when transported in bulk is
Annex II of MARPOL 73/78 and
covered under IGC code.
the IBC Code
15. Regulatory information
US federal regulations This product is a "Hazardous Chemical' as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
SARA 304 Emergency release notification
SULFUR DIOXIDE (CAS 7446-09-5) 500 LBS
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1063)
Not listed.
Toxic Substances Control Act (TSCA) This substance is not on the TSCA 8(b) inventory or is designated
"inactive".
Superfund Amendments and Reauthorization Act of 1986 (SARA)
SARA 302 Extremely hazardous substance
Chemical name CAS number Reportable Threshold Threshold Threshold
quantity planning quantity planning quantity, planning quantity,
(pounds) (pounds) lower value upper value
(pounds) (pounds)
Sulfur dioxide 7446-09-5 100 500
SARA 311/312 Hazardous
chemical
Classified hazard
categories
SARA 313 (TRI reporting)
Chemical name
Sulfur dioxide
Yes
Gas under pressure
Acute toxicity (any route of exposure)
Skin corrosion or irritation
Serious eye damage or eye irritation
CAS number % by wt.
7446-09-5 100
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Sulfur dioxide (CAS 7446-09-5)
Clean Water Act (CWA) Hazardous substance
Section 112(r) (40 CFR
68.130)
Safe Drinking Water Act Not regulated.
(SDWA)
FEMA Priority Substances Respiratory Health and Safety in the Flavor Manufacturing Workplace
Sulfur dioxide (CAS 7446-09-5) High priority
Sulfur dioxide SDS US
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014 6/8
US state regulations This chemical is a pesticide product registered by the Environmental Protection Agency and is
subject to certain labeling requirements under federal pesticide law. These requirements differ
from the classification criteria and hazard information required for safety data sheets, and for
workplace labels of non -pesticide chemicals. Following is the hazard information as required on
the pesticide label:
DANGER
Keep out of reach of children.
Pressurized Liquid Gas
Hazardous vapor and liquid.
Liquid causes burns of skin and eyes.
Hazardous to Humans and domestic animals.
Harmful if swallowed. Do not swallow or inhale.
This product is toxic to fish and wildlife.
Sulfur dioxide is a Non-flammbale, whitish colored gas of pungent odor.
Corrosive in presence of water.
US. Massachusetts RTK - Substance List
Sulfur dioxide (CAS 7446-09-5)
US. New Jersey Worker and Community Right -to -Know Act
Sulfur dioxide (CAS 7446-09-5)
US. Pennsylvania Worker and Community Right -to -Know Law
Sulfur dioxide (CAS 7446-09-5)
US. Rhode Island RTK
Sulfur dioxide (CAS 7446-09-5)
California Proposition 65
WARNING: This product can expose you to Sulfur dioxide, which is known to the State of California to cause
birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
California Proposition 65 - CRT: Listed date/Developmental toxin
Sulfur dioxide (CAS 7446-09-5) Listed: July 29, 2011
US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69602.3,
subd. (a))
Sulfur dioxide (CAS 7446-09-5)
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date 11-July-2014
Revision date 22-August-2019
Version # 04
NFPA ratings
41 : >
0
References Registry of Toxic Effects of Chemical Substances (RTECS)
GESTIS Substance Database
Sulfur dioxide
920566 Version M 04 Revision date: 22-August-2019 Issue date: 11-July-2014
SDS US
7/8
Disclaimer The information contained herein is accurate to the best of our knowledge. However, data, safety
standards and government regulations are subject to change and, therefore, holders and users
should satisfy themselves that they are aware of all current data and regulations relevant to their
particular use of product. CARUS CORPORATION DISCLAIMS ALL LIABILITY FOR RELIANCE
ON THE COMPLETENESS OR ACCURACY OR THE INFORMATION INCLUDED HEREIN.
CARUS CORPORATION MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTIABILITY OR FITNESS
FOR PARTICULAR USE OR PURPOSE OF THE PRODUCT DESCRIBED HEREIN. All conditions
relating to storage, handling, and use of the product are beyond the control of Carus Corporation,
and shall be the sole responsibility of the holder or user of the product.
(Carus and design) is a registered service mark of Carus Corporation.
Sulfur dioxide
920566 Version #: 04 Revision date: 22-August-2019 Issue date: 11-July-2014
SDS US
8/8
AEANDER
.kfMDEP CHEMCAL COPPOPATION
CAS #:
PRODUCT SPECIFICATION SHEET
CALCIUM NITRATE 66%
Effective 11/12/2018
Chemical Properties:
Chemical Formula:
Molecular Weight:
Chemical Name/Class:
Calcium Nitrate (wt.%):
pH @ 15°C (591F);
Specific Gravity @ 15°C (59°F)
13477-34-4
Ca(NO3)2
164.088 g/mol
Inorganic Nitrate Solution
66% - 70%
3.0 — 8.0
1.465 — 1.475
Physical Properties:
Vapor Density:
Evaporation Rate:
Freezing Point or Range:
Solubility in Water:
Boiling Point:
Vapor Pressure:
Odor Threshold:
Appearance:
Odor:
Product Use:
Not applicable
Similar to water.
-350C (-31OF)
Completely
1000C (>212°F)
Not applicable.
Not applicable
Colorless
Odorless
Variety of industrial applications
Distributed by:
Alexander Chemical Corporation
7593 South First Road
La Porte, Indiana 46350
800-348-8827
C
1. Identification
SAFETY DATA SHEET
Product identifier Calcium nitrate solution
Other means of identification Not available.
Recommended use Calcium nitrate solution is used as a water treatment chemical and in a variety of industrial
applications.
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Company name
Carus Corporation
Address
315 5th Street
Peru, Illinois 61354, USA
Telephone
(815) 223-1500
Toll Free
(800) 435-6856
Fax
(815)224-6816
E-mail
salesmkt@caruscorporation.com
Website
www.caruscorporation.com
Company name
Alexander Chemical Corporation, a Carus Group Inc. Company
Address
7593 S. First Road,
Kingsbury Industrial Park, Kingsbury, Indiana 46345, USA
Website
www.alexanderchemical.com
Company name
Sierra Chemical Co, a Carus Group Inc. Company
Address
2302 Larkin Circle
Sparks, Nevada 89431, USA
Website
www.sierrachemsales.com
Contact person
Dr. Chithambarathanu Pillai
Telephone
(800) 348-8827 - All other non -emergency inquiries about the product should be
directed to the company
Emergency telephone
For Hazardous Materials [or Dangerous Goods] Incidents ONLY
number
(spill, leak, fire, exposure or accident), call CHEMTREC at
CHEMTRECO, USA: 001 (800) 424-9300
CHEMTRECO, Mexico (Toll -Free - must be dialed from within country):
001-800-13-203-9987
CHEMTRECO, Other countries: 001 (703) 527-388
2. Hazard(s) identification
Physical hazards Not classified.
Health hazards Acute toxicity, oral Category 4
Serious eye damage/eye irritation Category 1
OSHA defined hazards Not classified.
Label elements
r
Signal word Danger
Hazard statement Harmful if swallowed. Causes serious eye damage.
Precautionary statement
Prevention Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Wear
protective gloves/eye protection/face protection.
Response If swallowed: Call a poison center/doctor if you feel unwell. If in eyes: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor. Rinse mouth.
Calcium nitrate solution SDS US
921755 Version #: 01 Revision date: - Issue date: 05-August-2014 1/6
Storage Store away from incompatible materials.
Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise None known.
classified (HNOC)
3. Composition/information on ingredients
Mixtures
Chemical name CAS number %
Calcium nitrate
13477-34-4 66-70
Composition comments
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume.
4. First -aid measures
Inhalation
Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact
Wash off with soap and water. Get medical attention if irritation develops and persists.
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention immediately.
Ingestion
If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Get medical
advice/attention if you feel unwell.
Most important
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
symptoms/effects, acute and
vision. Permanent eye damage including blindness could result.
delayed
Indication of immediate
Provide general supportive measures and treat symptomatically. Keep victim under observation.
medical attention and special
Symptoms may be delayed.
treatment needed
General information
Take off all contaminated clothing immediately. Contact with combustible material may cause fire
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Show this safety data sheet to the doctor in attendance. Wash contaminated
clothing before reuse.
5. Fire -fighting measures
Suitable extinguishing media
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing
Do not use water jet as an extinguisher, as this will spread the fire
media
Specific hazards arising from
During fire, gases hazardous to health may be formed.
the chemical
Special protective equipment
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters
Fire -fighting
In case of fire and/or explosion do not breathe fumes. In case of fire: Stop leak if safe to do so
equipment/instructions
Move containers from fire area if you can do so without risk.
Specific methods
Use standard firefighting procedures and consider the hazards of other involved materials.
6. Accidental release measures
Personal precautions,
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep away
protective equipment and
from clothing and other combustible materials. Wear appropriate protective equipment and
emergency procedures
clothing during clean-up. Do not touch damaged containers or spilled material unless wearing
appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if
significant spillages cannot be contained. For personal protection, see section 8 of the SDS.
Calcium nitrate solution SDS US
921755 Version #: 01 Revision date: - Issue date: 05-August-2014 2/6
Methods and materials for
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep
containment and cleaning up
combustibles (wood, paper, oil, etc.) away from spilled material. Ventilate the contaminated area
This product is miscible in water.
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible Use a non-combustible material like vermiculite, sand or earth to soak up the product
and place into a container for later disposal. Prevent entry into waterways, sewer, basements or
confined areas. Following product recovery, flush area with water.
Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containers
for later disposal. Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re -use. For waste disposal, see section 13 of the SDS.
Wear appropriate protective equipment and clothing during clean-up.
Environmental precautions
Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling
Provide adequate ventilation. Keep away from heat. Keep away from clothing and other
combustible materials. Take any precaution to avoid mixing with combustibles. Do not get this
material in contact with eyes. Do not taste or swallow. When using, do not eat, drink or smoke.
Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Observe
good industrial hygiene practices.
Conditions for safe storage,
Keep away from heat. Store in a cool, dry place out of direct sunlight. Store in original tightly
including any incompatibilities
closed container. Store in a well -ventilated place. Do not store near combustible materials. Store
away from incompatible materials (see Section 10 of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits No exposure limits noted for ingredient(s).
Biological limit values No biological exposure limits noted for the ingredient(s).
Appropriate engineering Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
controls should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Provide
eyewash station.
Individual protection measures, such as personal protective equipment
Eye/face protection Wear safety glasses with side shields (or goggles) and a face shield.
Skin protection
Hand protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier. Be aware that the liquid may penetrate the gloves. Frequent change is advisable.
Other Wear suitable protective clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene Keep from contact with clothing and other combustible materials. Remove and wash contaminated
considerations clothing promptly. Keep away from food and drink. Always observe good personal hygiene
measures, such as washing after handling the material and before eating, drinking, and/or
smoking. Routinely wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Clear liquid.
Color
Colorless.
Odor
No distinct odor.
Odor threshold
Not available.
pH
3-8
Melting point/freezing point
-31 °F (-35 °C)
Initial boiling point and boiling 212 °F (100 °C) 760 mm Hg
range
Flash point Not available.
Evaporation rate Not available.
Calcium nitrate solution SIDS US
921755 Version #: 01 Revision date: - Issue date: 05-August-2014 3/6
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower Not available.
(%)
Flammability limit - upper Not available.
(%)
Explosive limit - lower (%) Not available.
Explosive limit - upper (%) Not available.
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto -ignition temperature
Decomposition temperature
Viscosity
10. Stability and reactivity
Reactivity
Chemical stability
Possibility of hazardous
reactions
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
Not available.
Not available.
1.47 ±0.03 for 20% solution at 15 Celcius.
Completely soluble in water.
Not available.
Not available.
Not available.
Not available.
The product is stable and non -reactive under normal conditions of use, storage and transport.
Material is stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Heat. Contact with incompatible materials.
Reducing agents.
No hazardous decomposition products are known.
11. Toxicological information
Information on likely routes of exposure
Ingestion Harmful if swallowed.
Inhalation No adverse effects due to inhalation are expected.
Skin contact No adverse effects due to skin contact are expected.
Eye contact Causes serious eye damage.
Symptoms related to the Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
physical, chemical and vision. Permanent eye damage including blindness could result.
toxicological characteristics
Information on toxicological effects
Acute toxicity Harmful if swallowed.
Skin corrosion/irritation Prolonged skin contact may cause temporary irritation.
Serious eye damage/eye Causes serious eye damage
irritation
Respiratory or skin sensitization
Respiratory sensitization Not available.
Skin sensitization This product is not expected to cause skin sensitization.
Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1 % are
mutagenic or genotoxic.
Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
Reproductive toxicity This product is not expected to cause reproductive or developmental effects.
Calcium nitrate solution
921755 Version #: 01 Revision date: - Issue date: 05-August-2014
SIDS US
4/6
Specific target organ toxicity -
Not classified.
single exposure
Specific target organ toxicity -
Not classified.
repeated exposure
Aspiration hazard
Not classified
12. Ecological information
Ecotoxicity
The product is not classified as environmentally hazardous. However, this does not exclude the
possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Persistence and degradability
No data is available on the degradability of this product.
Bioaccumulative potential
No data available.
Mobility in soil
No data available.
Other adverse effects
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose of
contents/container in accordance with local/regional/national/international regulations.
Local disposal regulations Dispose in accordance with all applicable regulations.
Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Waste from residues / unused Dispose of in accordance with local regulations.
products
Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied.
14. Transport information
DOT
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
Transport in bulk according to This substance/mixture is not intended to be transported in bulk
Annex II of MARPOL 73/78 and
the IBC Code
15. Regulatory information
US federal regulations This product is a "Hazardous Chemical' as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
All components are on the U.S. EPA TSCA Inventory List.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
CERCLA Hazardous Substance List (40 CFR 302.4)
Not listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard - Yes
Delayed Hazard - No
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous Yes
chemical
Calcium nitrate -solution SDS US
921755 Version #: 01 Revision date: - Issue date: 05-August-2014 5/6
SARA 313 (TRI reporting)
Chemical name
Calcium nitrate
Other federal regulations
CAS number % by wt.
13477-34-4 66-70
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act Not regulated.
(SDWA)
US state regulations
US. Massachusetts RTK - Substance List
Not regulated.
US. New Jersey Worker and Community Right -to -Know Act
Calcium nitrate (CAS 13477-34-4)
US. Pennsylvania Worker and Community Right -to -Know Law
Not listed.
US. Rhode Island RTK
Calcium nitrate (CAS 13477-34-4)
US. California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
US - California Proposition 65 - Carcinogens & Reproductive Toxicity (CRT): Listed substance
Not listed.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date
Revision date
Version #
NFPA ratings
05-August-2014
Disclaimer The information contained herein is accurate to the best of our knowledge. However, data, safety
standards and government regulations are subject to change and, therefore, holders and users
should satisfy themselves that they are aware of all current data and regulations relevant to their
particular use of product. CARUS CORPORATION DISCLAIMS ALL LIABILITY FOR RELIANCE
ON THE COMPLETENESS OR ACCURACY OR THE INFORMATION INCLUDED HEREIN.
CARUS CORPORATION MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTIABILITY OR FITNESS
FOR PARTICULAR USE OR PURPOSE OF THE PRODUCT DESCRIBED HEREIN. All conditions
relating to storage, handling, and use of the product are beyond the control of Carus Corporation,
and shall be the sole responsibility of the holder or user of the product.
(Carus and design) is a registered service mark of Carus Corporation.
Calcium nitrate solution SDS US
921755 Version #: 01 Revision date: - Issue date: 05-August-2014 6/6
AE>0NDER
ALEXANDER CHEMICAL CORPORATION
PRODUCT SPECIFICATION SHEET
Sodium Hypochlorite 12.5 Trade% Solution
Effective 03/31/2020
Chemical Properties:
Chemical formula: NaOCI
Molecular weight: 74.44 g
Appearance: Bright yellow to yellow -green liquid
Odor: Chlorine odor
pH: 12.5 - 13.5
Solution Strength
Available Chlorine
by % Volume
Available Chlorine
by % Weight
Specific Gravity
@ 60OF (g/mL)
Excess Alkalinity (Typical) '
12.0-13.0
10.27-11.01
1.168-1.181
NaOH%
NaOH g/L
0.2 - 0.5
2.0 —5.0
* Excess Alkalinity on finished product is customized to specific customer requirements.
Physical Properties:
Boiling Point, OF: > 212 @ 10.50% (wt.) Available Chlorine
Freezing Point, OF: 2 @ 10.50% (wt.) Available Chlorine
Solubility in Water: Complete
NSF International maximum use for 12.50 % (wt.) Available Chlorine: 84 mg/L.
Manufacturedby:
Alexander Chemical Corporation NSF
Kingsbury Industrial Park
Kingsbury, Indiana 46345 NSF/ANSIt60
800/348-8827 Maximum Usage
Level: 84mg/L
AE>4NDER
ALEXANDER CHEMICAL CORPORATION
1. Identification
SAFETY DATA SHEET
Product identifier Sodium hypochlorite solution - sodium hypochlorite
Other means of identification Not available.
Recommended use Primarily used as a water treatment chemical as a disinfectant. Also used as a bleaching agent.
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Company name Alexander Chemical Corporation
Telephone 800-348-8827
Fax 219-393-5364
E-mail info@alexanderchemical.com
Website www.alexanderchemical.com
Address 7593 S. First Road,
Kingsbury Industrial Park, Kingsbury, Indiana 46345, USA
Emergency telephone number All other non -emergency inquiries about the product should be directed to the
company.
For Hazardous Materials [or Dangerous Goods] Incidents ONLY(spill, leak, fire,
exposure or accident), call CHEMTREC at
CHEMTRECO, USA: 001 (800) 424-9300
CHEMTRECO, Mexico (Toll -Free - must be dialed from within country):
001-800-13-203-9987
CHEMTRECO, Other countries: 001 (703) 527-388
2. Hazard(s) identification
Physical hazards Corrosive to metals Category 1
Health hazards Skin corrosion/irritation Category 1
Serious eye damage/eye irritation Category 1
Environmental hazards Hazardous to the aquatic environment, acute Category 1
hazard
OSHA defined hazards Not classified.
Label elements
Signal word Danger
Hazard statement May be corrosive to metals. Causes severe skin burns and eye damage. Toxic to aquatic life.
Precautionary statement
Prevention Keep only in original container. Do not breathe mist or vapor. Wash thoroughly after handling.
Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face
protection.
Sodium hypochlorite solution - sodium hypochlorite SDS US
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014 1 / 8
Response
If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all
contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and
keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison
center/doctor. Wash contaminated clothing before reuse. Absorb spillage to prevent material
damage.
Storage
Store locked up. Store in corrosive resistant container with a resistant inner liner.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise
None known.
classified (HNOC)
3. Composition/information on ingredients
Mixtures
Chemical name
CAS number %
Sodium hypochlorite
7681-52-9 5-20
Sodium hydroxide
1310-73-2 1-5
Water
7732-18-5 Balance
Composition comments
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume.
4. First -aid measures
Inhalation
Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact
Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or
poison control center immediately. Chemical burns must be treated by a physician. Wash
contaminated clothing before reuse.
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Call a physician or poison control center immediately.
Ingestion
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Most important
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
symptoms/effects, acute and
include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
delayed
blindness could result.
Indication of immediate
Provide general supportive measures and treat symptomatically. Chemical burns: Flush with water
medical attention and special
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
treatment needed
ambulance. Continue flushing during transport to hospital. Keep victim under observation.
Symptoms may be delayed.
General information
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
5. Fire -fighting measures
Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
Specific hazards arising from During fire, gases hazardous to health may be formed.
the chemical
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters
Fire -fighting Move containers from fire area if you can do so without risk.
equipment/instructions
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
6. Accidental release measures
Personal precautions, Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of
protective equipment and low areas. Wear appropriate protective equipment and clothing during clean-up. Do not breathe
emergency procedures mist or vapor. Do not touch damaged containers or spilled material unless wearing appropriate
protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant
spillages cannot be contained. For personal protection, see section 8 of the SIDS.
Sodium hypochlorite solution - sodium hypochlorite SDS US
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014 2/8
Methods and materials for This product is miscible in water
containment and cleaning up
Large Spills: Stop the flow of material, if this is without risk. Use water spray to reduce vapors or
divert vapor cloud drift. Dike the spilled material, where this is possible. Absorb spillage to prevent
material damage. Use a non-combustible material like vermiculite, sand or earth to soak up the
product and place into a container for later disposal. Prevent entry into waterways, sewer,
basements or confined areas. Following product recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination
Never return spills to original containers for re -use. For waste disposal, see section 13 of the SIDS.
Environmental precautions Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into
drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling Do not breathe mist or vapor. Do not get in eyes, on skin, or on clothing. Provide adequate
ventilation. Wear appropriate personal protective equipment. Avoid release to the environment.
Observe good industrial hygiene practices.
Conditions for safe storage, Store locked up. Store in corrosive resistant container with a resistant inner liner. Keep only in the
including any incompatibilities original container. Store away from incompatible materials (see Section 10 of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits
for Air Contaminants (29 CFR 1910.1000)
Components
Type Value
Sodium hydroxide (CAS
PEL 2 mg/m3
1310-73-2)
US. ACGIH Threshold Limit Values
Components
Type Value
Sodium hydroxide (CAS
Ceiling 2 mg/m3
1310-73-2 )
US. NIOSH: Pocket Guide to Chemical Hazards
Components
Type Value
Sodium hydroxide (CAS
Ceiling 2 mg/m3
1310-73-2)
US. Workplace Environmental Exposure Level (WEEL) Guides
Components
Type Value
Sodium hypochlorite (CAS
STEL 2 mg/m3
7681-52-9)
Biological limit values
No biological exposure limits noted for the ingredient(s).
Appropriate engineering
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
controls
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower must be available when handling this product.
Individual protection measures,
such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles) and a face shield.
Skin protection
Hand protection
Wear appropriate chemical resistant gloves. Be aware that the liquid may penetrate the gloves.
Frequent change is advisable. Nitrile or neoprene gloves are recommended.
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
Always observe good personal hygiene measures, such as washing after handling the material
considerations
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
Sodium hypochlorite solution - sodium hypochlorite SIDS US
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014 3/8
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Greenish yellow liquid.
Color
Light greenish yellow.
Odor
Chlorine.
Odor threshold
Not available.
pH
11.5 t0.3
Melting point/freezing point
-11 T (-23.9 °C)
Initial boiling point and boiling
> 212 T (> 100 °C)
range
Flash point
Not available.
Evaporation rate
Not available.
Flammability (solid, gas)
Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower
Not available.
N
Flammability limit - upper
Not available.
N
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
Vapor density
Relative density
Solubility(ies)
Solubility (water)
Partition coefficient
(n-octanol/water)
Auto -ignition temperature
Decomposition temperature
Viscosity
Not available.
Not available.
1.09 -1.21
Completely soluble in water.
Not available.
Not available.
Not available.
Not available.
10. Stability and reactivity
Reactivity May be corrosive to metals.
Chemical stability Material is stable under normal conditions.
Possibility of hazardous No dangerous reaction known under conditions of normal use.
reactions
Conditions to avoid Contact with incompatible materials.
Incompatible materials Acids. Metals. Strong oxidizing agents.
Hazardous decomposition No hazardous decomposition products are known. Contact with acids liberates toxic gas.
products
11. Toxicological information
Information on likely routes of exposure
Ingestion
Causes digestive tract burns.
Inhalation
May cause irritation to the respiratory system. Prolonged inhalation may be harmful.
Skin contact
Causes severe skin burns.
Eye contact
Causes serious eye damage.
Symptoms related to the
Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
physical, chemical and
include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
toxicological characteristics
blindness could result.
Information on toxicological effects
Sodium hypochlorite solution - sodium hypochlorite SIDS US
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014 4/8
Acute toxicity
Components Species Test Results
Sodium hydroxide (CAS 1310-73-2)
Acute
Dermal
LC50 Rabbit
1350 mg/kg, (Calculated)
Oral
LDLo Rabbit 500 mg/kg, (Calculated)
Sodium hypochlorite (CAS 7681-52-9)
Acute Rat
Oral Causes severe skin burns and eye damage. 8.91 g/kg
LD50
Causes serious eye damage.
Skin corrosion/irritation
Serious eye damage/eye
irritation
Respiratory or skin sensitization
Respiratory sensitization
Not classified.
Skin sensitization
This product is not expected to cause skin sensitization.
Germ cell mutagenicity
No data available to indicate product or any components present at greater than 0.1 % are
mutagenic or genotoxic.
Carcinogenicity
This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
IARC Monographs. Overall Evaluation of Carcinogenicity
Sodium hypochlorite (CAS
7681-52-9) 3 Not classifiable as to carcinogenicity to humans.
OSHA Specifically Regulated
Substances (29 CFR 1910.1001-1050)
Not listed.
Reproductive toxicity
This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity -
Not classified.
single exposure
Specific target organ toxicity -
Not classified.
repeated exposure
Aspiration hazard
Not classified.
Chronic effects
Prolonged inhalation may be harmful.
12. Ecological information
Ecotoxicity
Components Species
Sodium hydroxide (CAS 1310-73-2)
Aquatic
Crustacea EC50
Fish LC50
Test Results
Western mosquitofish (Gambusia affinis) 125 mg/I, 96 hours
Water flea (Ceriodaphnia dubia) 34.59 - 47.13 mg/I, 48 hours
Sodium hypochlorite solution - sodium hypochlorite SDS US
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014 5/8
Components
Species Test Results
Sodium hypochlorite (CAS 7681-52-9)
Aquatic
Fish
LC50 Rainbow trout,donaldson trout 0.03 - 0.07 mg/I, 96 hours
(Oncorhynchus mykiss)
Persistence and degradability
No data is available on the degradability of this product.
Bioaccumulative potential
No data available.
Mobility in soil
No data available.
Other adverse effects
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow
this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches
with chemical or used container. Dispose of contents/container in accordance with
local/regional/national/intemational regulations.
Local disposal regulations
Dispose in accordance with all applicable regulations.
Hazardous waste code
D002: Waste Corrosive material [pH —2 or=>12.5, or corrosive to steel]
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
Waste from residues / unused
Dispose of in accordance with local regulations.
products
Contaminated packaging
Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied.
14. Transport information
DOT
UN number
UN1791
UN proper shipping name
Hypochlorite solutions
Transport hazard class(es)
Class
8
Subsidiary risk
-
Label(s)
8
Packing group
II
Environmental hazards
Marine pollutant
Yes
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Special provisions
A7, 62, B15, 1132, IPS, N34, T7, TP2, TP24
Packaging exceptions
154
Packaging non bulk
202
Packaging bulk
242
IATA
UN number UN1791
UN proper shipping name Hypochlorite solution
Transport hazard class(es)
Class 8
Subsidiary risk -
Packing group II
Environmental hazards Yes
ERG Code 8L
Special precautions for user Read safety instructions, SDS and emergency procedures before handling
IMDG
UN number UN1791
UN proper shipping name HYPOCHLORITE SOLUTION
Sodium hypochlorite solution - sodium hypochlorite SDS US
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014 6/8
Transport hazard class(es)
Class 8
Subsidiary risk -
Label(s) 8
Packing group II
Environmental hazards
Marine pollutant Yes
EmS F-A, S-B
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Transport in bulk according to This product is a liquid and when transported in bulk is covered under MARPOL 73/78 Annex II
Annex II of MARPOL 73/78 and This product is listed in the IBC Code.
the IBC Code Ship type: 2
Pollution category: Y
15. Regulatory information
US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
All components are on the U.S. EPA TSCA Inventory List.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
CERCLA Hazardous Substance List (40 CFR 302.4)
Sodium hydroxide (CAS 1310-73-2) LISTED
Sodium hypochlorite (CAS 7681-52-9) LISTED
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard - Yes
Delayed Hazard - Yes
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
SARA 302 Extremely hazardous substance
Not listed.
SARA 311/312 Hazardous Yes
chemical
SARA 313 (TRI reporting)
Not regulated.
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Not regulated.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Not regulated.
Safe Drinking Water Act Not regulated.
(SDWA)
US state regulations This chemical is a pesticide product registered by the Environmental Protection Agency and is
subject to certain labeling requirements under federal pesticide law. These requirements differ
from the classification criteria and hazard information required for safety data sheets, and for
workplace labels of non -pesticide chemicals. Following is the hazard information as required on
the pesticide label:
DANGER
Keep out of reach of children. Hazardous to Humans and domestic animals.
Corrosive, causes severe skin and eye irritation or chemical burns to broken skin.
Causes eye damage.
This pesticide is toxic to fish and aquatic organisms.
Strong oxidizing agent.
US. Massachusetts RTK - Substance List
Sodium hydroxide (CAS 1310-73-2)
Sodium hypochlorite solution - sodium hypochlorite
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014
SDS US
7/8
Sodium hypochlorite (CAS 7681-52-9)
US. New Jersey Worker and Community Right -to -Know Act
Sodium hydroxide (CAS 1310-73-2)
Sodium hypochlorite (CAS 7681-52-9)
US. Pennsylvania Worker and Community Right -to -Know Law
Sodium hydroxide (CAS 1310-73-2)
Sodium hypochlorite (CAS 7681-52-9)
US. Rhode Island RTK
Sodium hydroxide (CAS 1310-73-2)
Sodium hypochlorite (CAS 7681-52-9)
US. California Proposition 66
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
US - California Proposition 66 - Carcinogens & Reproductive Toxicity (CRT): Listed substance
Not listed.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
"A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).
16. Other information, including date of preparation or last revision
Issue date
Revision date
Version #
NFPA ratings
30-July-2014
26-January-2021
04
Disclaimer The information contained herein is accurate to the best of our knowledge. However, data, safety
standards and government regulations are subject to change and, therefore, holders and users
should satisfy themselves that they are aware of all current data and regulations relevant to their
particular use of product. ALEXANDER CHEMIAL CORPORATION DISCLAIMS ALL LIABILITY
FOR RELIANCE ON THE COMPLETENESS OR ACCURACY OR THE INFORMATION
INCLUDED HEREIN. CARUS CORPORATION MAKES NO WARRANTY, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTIABILITY OR
FITNESS FOR PARTICULAR USE OR PURPOSE OF THE PRODUCT DESCRIBED HEREIN. All
conditions relating to storage, handling, and use of the product are beyond the control of Alexander
Chemical Corporation, and shall be the sole responsibility of the holder or user of the product.
Sodium hypochlorite solution - sodium hypochlorite
Version #: 04 Revision date: 26-January-2021 Issue date: 30-July-2014
SIDS US
8/8
3/31 /2021
Listing Category Search Page I NSF International
NSC
The Public Health and Safety Organization
NSF Product and Service Listings
These NSF Official Listings are current as of Wednesday, March 31, 2o2i at 12:15 a.m. Eastern Time. Please
contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this
information by clicking on the below link for the most accurate information:
http_Jliiifo.nsf.orglCertificd/PwsChcmicals/Listings.as ?n Com- any�YZ46o&Standard=o6o&
NSF/.ANSI/CAN 60 i Health Drinking Water Treatment Chemicals - ea th
Effects
Alexander Chemical
Corporation
7593 South First Road
Kingsbury Industrial Park
Kingsbury, IN 46345
United States
800-445-9458
630-955-6050
Facility: Kingsbury, IN
Ammonia, Anhydrous
Trade Designation
Anhydrous Ammonia
Ammonium Hydroxide
Trade Designation
Ammonium Hydroxide
Chlorine[CL]
Trade Designation
Chlorine
Product Function Max Use
Chloramination 5 mg/L
Product Function Max Use
Chloramination 10 mg/L
Product Function Max Use
Disinfection & Oxidation 30 mg/L
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 1/3
3/31/2021 Listing Category Search Page I NSF International
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
Hydrofluosilicic Acid
Trade Designation Product Function Max Use
Fluosilicic Acid - Water Treatment Grade Fluoridation 5 mg/L
Hydrofluosilicic Acid - Water Treatment Grade Fluoridation 5 mg/L
Sodium Bisulfite[i]
Trade Designation Product Function Max Use
Sodium Bisulfite Solution, 38% Dechlorination 46mg/L
[1] This product contains sulfite.
Sulfites have been known to cause potentially lethal
allergic reactions in sulfite -sensitive individuals.
The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/Q.
Sodium Hydroxide
Trade Designation
Caustic Soda -Liquid
Sodium Hydroxide -Liquid (Diaphragm Cell)
Sodium Hydroxide -Liquid (Membrane Cell)
Sodium Hypochlorite[CL]
Trade Designation
12.5% Sodium Hypochlorite
Liquid Bleach
Liquid Bleach 15
Sodium Hypochlorite 12.5%
Sodium Hypochlorite 15%
Product Function
Max Use
Corrosion & Scale Control
too mg/L
pH Adjustment
Corrosion & Scale Control
too mg/L
pH Adjustment
Corrosion & Scale Control
loo mg/L
pH Adjustment
Product Function
Max Use
Disinfection & Oxidation
84mg/L
Disinfection & Oxidation
84 mg/L
Disinfection & Oxidation
67mg/L
Disinfection & Oxidation
84 mg/L
Disinfection & Oxidation
67mg/L
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
Sulfuric Acid
Trade Designation
Product Function
Max Use
https://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=17460&Standard=060 2/3
3/31 /2021
Listing Category Search Page I NSF International
Sulfuric Acid Corrosion & Scale Control 50 mg/L
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was o seconds
https://info.nsf.org/Certified/PwsChemicals/LIstings.asp?Company=17460&Standard=060 3/3