HomeMy WebLinkAboutOpening of Bids - One or More, 2020 or Newer, 6 Yard Front End Rubber Tire Loader - McCann Industries, Inc.NOTICE TO BIDDERS
Notice is hereby given that the City of South Bend, Indiana, will receive sealed bids at the Office of the
Board of Public Works, Ste. 1316, County -City Building, 227 West Jefferson Blvd., South Bend,
Indiana, until the hour of 9:30 a.m. Local Time, on March 24, 2020 for the following:
Spec A — One (1) or More 2020 or Newer 6 Yard Front End Rubber Tire Loader
Specifications are available for download by visiting the City of South Bend's web page at
ww.southbendin.go :
X Click on "I'm Looking For"
X Click on "Doing Business in South Bend"
X Click on "City Contracts — Invitations to Bid"
X Click on the "Required Link" to register your company. You must register to receive
addenda and updates to the specific bid you are interested in. Failure to do so
could render your bid non -responsive to the specifications.
There is no charge for the specifications. The specifications are also available for review only during
regular working hours in the Department of Public Works, Ste. 1316, County -City Building, 227 W.
Jefferson Blvd., South Bend, Indiana 46601.
Bids received after 9:30 a.m. Local Time, on March 24, 2020 will be returned unopened.
Bids must be on the City of South Bend Bid/Proposal form provided, which includes a Non -Debarment
Affidavit, Non -Discrimination Commitment form, and a Non -Collusion Affidavit Form. Certified Check or
Bid Bond in the amount of not less than 10% must be submitted with the bid. A refund of the bid security
will be issued upon satisfaction of Bid Award.
The Board reserves the right to reject any or all bids or to accept a full or partial award of the bid or bids
which, in its judgment, will be to the best interests of the City of South Bend. If the Board elects to award
the base bid plus an alternate(s), the Board will look at the totality of the cost when determining the
lowest, most responsible bid.
The Board may reject any bid that does not conform to these requirements as non -responsive.
BOARD OF PUBLIC WORKS
Linda M. Martin, Clerk
Publish two times:
February 28, 2020
March 6, 2020
CITY OF SOUTH BEND INDIANA
SELLER'S BID FOR SALE OR LEASE OF MATERIALS�;�
AND NON -COLLUSION AND NON -DEBARMENT AFFIDAVIT AND
NON-DISCRIMINATION COMMITMENT FOR SELLERS'
BID NAME Spec A — One (1) More or Less 2020 or Newer 6 Yard Front End Rubber Tire Loader
F... ..........._........................................... ___...........
OR BIDS DUE March 24, 2020 9:30 a._..........................................,.,.......................,..,...w�__
m.
Bidder
Date: MARCH 19, 2020 (Firm): MCCANN INDUSTRIES„ INC
Address: 543 S ROHLWING RD
City/State/Zip: ADDISON, IL 60101 Telephone Number: _630 627-g000 mmmmmmmmmmmm......
Agent of Bidder (if Applicable): MICHAEL GENTRY
When the prospective Contractor is unable to certify to any of the statements below, it shall attach an explanation to this Affidavit.
CONTRACTOR'S NON -COLLUSION AND NON -DEBARMENT AFFIDAVIT,
CERTIFICATION REGARDING INVESTMENT WITH IRAN, EMPLOYMENT
ELIGIBILITY VERIFICATION, NON-DISCRIMINATION COMMITMENT AND
CERTIFICATION OF USE OF UNITED STATES STEEL PRODUCTS OR FOUNDRY
PRODUCTS
(Must be completed for all quotes and bids. Please type or print)
STATE OF
�" ) SS:
....._..... COUNTY )
The undersigned Contractor, being duly sworn upon his/her/its oath, affirms under the penalties of perjury
that:
1. Contractor has not, nor has any other member, representative, or agent of the firm,
company, corporation or partnership represented by him, entered into any combination,
collusion or agreement with any person relative to the price to be bid by anyone at such
letting nor to prevent any person from bidding nor to induce anyone to refrain from
bidding, and that this bid is made without reference to any other bid and without any
agreement, understanding or combination with any other person in reference to such
bidding. Contractor further says that no person or persons, firms, or corporation has, have
or will receive directly or indirectly, any rebate, fee, gift, commission or thing of value
on account of such sale; and
2. Contractor certifies by submission of this proposal that neither contractor nor any
of its principals are presently debarred, suspended, proposed for debarment, declared
ineligible, or voluntarily excluded from participation in this transaction by any Federal
department or agency; and
2
3. Contractor has not, nor has any successor to, nor an affiliate of, Contractor,
engaged in investment activities in Iran.
a. For purposes of this Certification, "Iran" means the government of Iran and any
agency or instrumentality of Iran, or as otherwise defined at Ind. Code § 5-22-16.5-5,
as amended from time -to -time.
b. As provided by Ind. Code § 5-22-16.5-8, as amended from time -to -time, a Contractor
is engaged in investment activities in Iran if either:
Contractor, its successor or its affiliate, provides goods or services of twenty
million dollars ($20,000,000) or more in value in the energy sector of Iran;
or
i i. Contractor, its successor or its affiliate, is a financial institution that extends
twenty million dollars ($20,000,000) or more in credit to another person for
forty-five (45) days or more, if that person will (i) use the credit to provides
goods and services in the energy sector in Iran; and (ii) at the time the
financial institution extends credit, is a person identified on list published by
the Indiana Department of Administration.
4. Contractor does not knowingly employ or contract with an unauthorized alien, nor
retain any employee or contract with a person that the Contractor subsequently learns is
an unauthorized alien. Contractor agrees that he/she/it shall enroll in and verify the work
eligibility status of all of Contractor's newly hired employees through the E-Verify
Program as defined by I.C. 22-5-1.7-3. Contractor's documentation of enrollment and
participation in the E-Verify Program is included and attached as part of this bid/quote;
and
5. Contractor shall require his/her/its subcontractors performing work under this
public contract to certify that the subcontractors do not knowingly employ or contract
with an unauthorized alien, nor retain any employee or contract with a person that the
subcontractor subsequently learns is an unauthorized alien, and that the subcontractor has
enrolled in and is participating in the E-Verify Program. The Contractor agrees to
maintain this certification throughout the term of the contract with the City of South
Bend and understands that the City may terminate the contract for default if the
Contractor fails to cure a breach of this provision no later than thirty (30) days after being
notified by the City.
6. Persons, partnerships, corporations, associations, or joint venturers awarded a
contract by the City of South Bend through its agencies, boards, or commissions shall not
discriminate against any employee or applicant for employment in the performance of a
City contract with respect to hire, tenure, terms, conditions, or privileges of employment,
or any matter directly or indirectly related to employment because of race, sex, religion,
color, national origin, ancestry, age, gender expression, gender identity, sexual
orientation or disability that does not affect that person's ability to perform the work.
In awarding contracts for the purchase of work, labor, services, supplies, equipment,
materials, or any combination of the foregoing including, but not limited to, public works
3
contracts awarded under public bidding laws or other contracts in which public bids are
not required by law, the City, its agencies, boards, or commissions may consider the
Contractor's good faith efforts to obtain participation by those Contractors certified by
the State of Indiana as a Minority Business ("MBE") or as a Women's Business
Enterprise ("WBE") as a factor in determining the lowest, responsible, responsive
bidder.
In no event shall persons or entities seeking the award of a City contract be required to
award a subcontract to an MBE/WBE; however, it may not unlawfully discriminate
against said WBE/MBE. A finding of a discriminatory practice by the City's MBE/WBE
Utilization Board shall prohibit that person or entity from being awarded a City contract
for a period of one (1) year from the date of such determination, and such determination
may also be grounds for terminating the contact for which the discriminatory practice or
noncompliance pertains.
7. The undersigned contractor agrees that the following nondiscrimination
commitment shall be made a part of any contract which it may henceforth enter into with
the City of South Bend, Indiana or any of its agencies, boards or commissions.
Contractor agrees not to discriminate against or intimidate any employee or applicant for
employment in the performance of this contract with privileges of employment, or any
matter directly or indirectly related to employment, because of race, religion, color, sex,
gender expression, gender identity, sexual orientation, handicap, national origin or
ancestry. Breach of this provision may be regarded as material breach of contract.
I, the undersigned bidder or agent as contractor on a public works project, understand my
statutory obligations to the use of steel products or foundry products made in the United
States (I.C. 5-16-8-1). I hereby certify that I and all subcontractors employed by me for
this project will use steel products or foundry products made in the United States on this
project if awarded. I understand I have an affirmative duty to notify the City in my bid
that my proposal does not include the use of steel products or foundry products made in
the United States. I understand it is my sole obligation and responsibility to provide a
justification to the City, subject to review and approval, why the cost of United States
made steel or foundry products is unreasonable. Prior to award and upon submission of
bid which does not use steel products or foundry products made in the United States, the
City, through its director of public works, shall make a determination if the price of
United States made steel or foundry is unreasonable. I understand that violations
hereunder may result in forfeiture of contractual payments.
I hereby affirm under the penalties of perjury that the facts and information contained in the foregoing bid
for public works are true and correct.
Dated this / day of tel' „ 20k
MCC'ANN I I S IR.IE
CC' tot IItr r�/B der (Firm)
ignatr,lre` of Contractor/Bidder or Its Agent
STEVE ROGGEANmCFO
Printed Name and Title
Subscribed and sworn to before me this day of , 20 X
My Commission Expires )�'ku
A"WPION"VERF05
•
County of Residence
LINDSEY TANIS
OFFICIAL SEAL
Notary Public - State of Illinois
My Commission Expires Dec 06, 2023
5
(To be completed only by Contractors/Bidders claiming to be a "local Indiana business " pursuant to I.C. 36-1-12-22)
INDIANA LOCAL BUSINESS PREFERENCE CLAIM
A "local Indiana business" refers to any of the following:
(1) A business whose principal place of business is located in an affected county.
(2) A business that pays a majority of its payroll (in dollar volume) to residents of affected counties.
(3) A business that employs residents of affected counties as a majority of its employees.
(4) A business that makes significant capital investments in the affected counties as defined in rules adopted by the political
subdivision.
(5) A business that has a substantial positive economic impact on the affected counties as defined by criteria in rules adopted by
the political subdivision.
An "affected county" refers to St. Joseph County, Indiana, or the following counties located adjacent to St. Joseph County:
Elkhart County, Marshall County, Starke County and LaPorte County
There are the following price preferences for supplies purchased from a local Indiana business:
• S% for a purchase expected by the purchasing agency to be lam Man $50, 000
• 3% for a purchase expected by the purchasing agency to beat least $50, 000 but less than $100, 000.
• 1 % for a purchase expected by the purchasing agency to beat least $100, 000.
Date:
Pursuant to I.C. 5-22-15-20.9, claims a local Indiana business
preference for Project „mmmITITmmmmmww m (Project #y ) located within the City of
South Bend, St. Joseph County, Indiana. w�
❑ The location of the principal place of business is
(address)
❑ St. Joseph County, Indiana
❑ The following county located adjacent to St. Joseph County, Indiana.;
The majority of the business's payroll for the 12 months prior to the date of this Bid is to residents of St.
Joseph County, Indiana or the adjacent county noted above.
The majority of the business's employees for the 12 months prior to the date of this Bid are residents of
St. Joseph County, Indiana, or the adjacent county noted above.
If the business is deemed to be the apparent lowest, responsible, responsive bidder, then it shall provide
supporting documentation for the 12 month period prior to the date of the Bid of (i) the total payroll
amount paid to all employees of the business, and (ii) the total payroll amount paid to employees who are
residents of St. Joseph County and the adjacent county noted above.
WHEN SUPPLYING SUPPORTING PAYROLL RECORDS, RIDD 'R SHALL REDACT ALL
SOCIAL SECURITY NUMBERS.
Dated this ._ ................................. day of ... ..........................120
Contractor/Bidder (Firm)
Signature of Contractor/Bidder or Its Agent
Printed Name and Title
0
SPECIFICATIONS
CITY OF SOUTH BEND
Spec A — One (1) More or Less 2020 or Newer 6 Yard Front End Rubber
BID NAME Tire Loader
FOR BIDS DUE March 24, 2020 9:30 a.m.
Pursuant to notices given, the undersigned offers bid(s) to the City o "South Bend in accordance
with the following attachment(s) which specify the class or item number or description, quantity,
unit, unit price.
SPEC A- ONE 1 MORE OR LESS 2020 OR NEWER 6 YARD FRONT END RUBBER
TIRE LOADER
It is the intent of these specifications to describe a new rubber -tired, articulated, four-wheel
drive, diesel powered, front end loader. Loader bucket to have a 6-yard minimum struck
capacity. Operating weight minimum 58,000 lbs. Unit to be bid with and without trade in. The
City reserves the right to award with or without a trade in.
The City of South Bend reserves the right to reject any and all bids or to accept a full or partial
award of the bid or bids which, in its judgment, will be in the best interest of the City of South
Bend. Vendor to complete bid proposal, non-discrimination commitment, and options contained
in this bid specification and attach to the submitted bid.
Any exceptions to the following specifications must be noted by the dealer on a separate sheet of
paper at the time of bidding in order for the bid to be valid.
Engine: Tier four certified six (6) cylinder Cummins QSG12 electronic diesel or
equal with a minimum of 331 horsepower. Emergency shut down for low
oil pressure and high-water temperature. Fuel system to include primary
and secondary fuel filters and fuel -water separator. Air cleaner to be dual
stage equipped with restriction indicator. Engine to be equipped with cold
weather starting aid engine block heater. Reversible hydraulic fan for easy
clean out.
Transmission: Torque converter drive, electronic controlled shifts. Five (5) forward and
three (3) reverse speeds, minimum travel speed 24 mph. Down shift
control button to be located on the loader control levers. Clutch
disconnect to work through brake pedal.
Axles/Differentials: Limited slip — outboard planetaries
Brakes: Outboard four-wheel, wet disc, self-adjusting fully hydraulic brake
system. Brakes to be oil cooled and operated by one of two brake pedals.
Parking brake to be spring applied and hydraulically released. Parking
brake to be manually applied and automatic with loss of engine power.
Dual pedals.
7
Steering: Fully hydraulic power steering with 40-degree minimum articulation in
each direction.
Hydraulics: Variable displacement piston pump minimum 90 GPM, pressure
compensating system, 42-gallon minimum reservoir with sight glass.
System to include 10-micron full flow filter and oil cooler. Loader
controls to be two -function valve with single control lever. Must be
equipped with ride control.
Electrical: 24-volt system, 110-amp minimum output alternator, 2-12 volt 950 CCA
minimum batteries. System to be waterproof. 24-volt systems to include
converter to 12 volts to operate City owned communication equipment.
Must be capable of handling 20 AMPS. Unit shall be controlled by
ignition switch. Unit will have 3' of wire including ground, battery, and
ignition feed capable of handling 20 amps coiled up in center of dash.
Tires: 26.5 X R25, 20 PR L3 Radial Tires
Bucket: The loader shall be equipped with a 6-yard minimum struck capacity with
3-piece bolt on reversible cutting edge. Hole punch shall be like other
loaders in the City Fleet. Bucket hydraulic system to have automatic
return -to -dig, return -to -travel, boom height kick -out control, and bucket
level indicator. Bucket to be automatic self -leveling. Unit to be equipped
with two bar linkage.
Cab: All steel R.O.P.S. design with access from both sides. Sound suppressed,
vented, heavy duty heater/defroster, air conditioning, front wiper and
washer, interior light, adjustable air suspension seat, tinted windshield,
rear window sunshade, door locks, dual outside rear view mirrors, full
front & rear fenders. The following dash mounted illuminated gauges shall
be included: fuel, voltmeter, hour meter, engine oil pressure, engine
coolant temperature, transmission oil temperature. AM/FM radio. On
board scale. All around four camera monitoring system.
Lights: Lighting system to include two rubber mounted head lights and two rear
mounted brake and turn lights. In addition, two front and two rear work
lights shall be included, along with a roof mounted amber strobe light.
Frame & General: 138" minimum wheelbase. 136" maximum height. Operating weight
58,000 lbs. minimum. Equipped with side and bottom guards for
transmission and front frame. Rear counterweight to be included. The
loader shall be serviceable from ground level and have remote grease
fittings for all lube points. Fuel tank 100 gallons minimum. DEF Tank
shall be 15 gallons minimum. Vendor to supply two each, parts, service,
and operator's manual at time of delivery.
8
i oa 1 6
Performance:
44,090 lb minimum tipping
load straight, 44,455 lbs. -
minimum at full turn.
Oeo 4 LCI
0 0 _ LA� r
Minimum DumpClearance
YES �� 12102
of 123 inches.
Minimum breakout for
51,665 lbs.
51,500 lbs. minimum break
YE
out force.
Performance
Evaluation: Each bidder should be prepared to provide the City with a unit for
evaluation. A performance evaluation will be conducted by a team of City
employees. Performance as determined by the City will be used to decide
if the unit bid is responsive to the needs of the City of South Bend. The
City of South Bend reserves the right to have a representative from an
outside agency attend the performance evaluations. The results of these
performance evaluations will be used to determine if the unit bid meets the
minimum performance standards of the City of South Bend. The
evaluation results are the property of the City of South Bend and cannot be
used by anyone other than City employees for evaluation purposes.
Safety: Unit to conform to all state and federal occupational health and safety
requirements. Loader to be equipped with back up alarm and seat belt.
Training: The first service will be performed at Central Services, 1045 West Sample
Street, and will also serve as a training session on loader maintenance for
mechanics. The cost of this service will be included in the bid price.
The loader shall be full of fuel, serviced and checked in
accordance with the manufacturer's recommendations prior to delivery.
The successful bidder shall provide up to eight hours instruction for
maintenance and operation at time of delivery.
Warranty/Service: Successful bidder is responsible for all warranty repairs. Vendor to state
nearest warranty dealer. If travel outside the City of South Bend is
required for warranty repairs, transportation of the unit is the
responsibility of the successful bidder. Transportation must take place
within the next normal working day or the responsible party will be
charged $100.00 per day late fee.
9
Loaner to be supplied for any warranty work when machine is down for
five days or more.
Complete unit 12 month/2,000 hours except for tires and batteries. 5
year/10,000 hour, 100% parts and labor, engine and drive train warranty to
be included. Vendor to include pricing for extended warranties.
Quantity: One (1) or more
Alternate 1: Hydraulically operated bucket coupler system compatible with a JRB
Grapple Bucket. Must include axillary hydraulic system to operate grapple
and broom.
Alternate 2: Grapple Rake 108" grapple rake with 9 tines and dual paddle design
Alternate 3: Broom 96" hydraulically driven rotary angle broom capable of 30-degree
swivel.
Alternate 4: Forks 96" fork carriage with 60" adjustable fork tines.
Alternate 5: Snow Pusher 168" x 18 cubic yard snow pusher with rubber edge
Trade -In: Unit SN613, 2006 Hyundai, VIN# LB0410028
Unit 299, 2000 Case 921C Loader, VIN# JEE0123503
Delivery: Bidder must state an accurate delivery date which shall not exceed
150 days from the date of bid award. Due to the age of the City's
existing fleet, it is imperative that the units be delivered as quickly as
possible. Stated delivery lead time will be included as an integral part
of our bid selection process. FOB Central Services. Liquidated damages
of $100.00 dollars per day, per unit will be assessed by the City and
deducted from any monies owed to the vendor if the units are not
delivered complete to the City by the stated date. The unit and all related
paperwork is to be delivered to:
Central Services Division
1045 West Sample Street
South Bend, Indiana 46619
The Board will award the bid to the lowest responsible and responsive
bidder. If the bid is not awarded to the lowest bidder, the factors used to
justify the awards will be stated in writing at the request of any bidder.
The Board reserves the right to reject any and/or all bids or portions
thereof and to waive any irregularities or informalities
10
BID/PROPOSAL
CITY OF SOUTH BEND
Spec A — One (1) More or Less 2020 or Newer 6 Yard Front End Rubber
BID NAME Tire Loaders _
FOR BIDS DUE March 24, 2020 9:30 a.m.
Description
Year/Make/Model
Unit Price
Wh,2LL L icy-p—
$ 293 5-2 I. ri
Year
Make/Model — Trade In
Unit Price
2006
Unit SN613, Hyundai, VIN# LB0410028
2000
Unit 299, Case 921C Loader, VIN# JEE0123503
Alternate #
Description
Unit Price
1
.........
Hydraulically operated bucket coupler system
$
78
compatible with a JRB Grapple Bucket. Must include
axill hydraulic system tooperate gppple and broom.
2
Grapple Rake 108" grapple rake with 9 tines and dual
$
paddle design
3 D, Q01. no
3
Broom 96" hydraulically driven rotary angle broom
$
ca able of 30-de ree swivel.
la S 7 9. �
4
Forks 96" fork carriage with 60" adjustable fork tines.
$
5
Snow Pusher 168" x 18 cubic yard snow pusher with
$
rubber edge
7 Zo . ®®
_..
Estimated number of days for delivery from award date.
/ �O
Bidder
(Firm): MCCANN INDUSTRIES INC
Address: 543 S ROHLWING RD
City/State/
Zip: ADDISON, IL 60101
Telephone
Number: 630-627-0000
Fax
Number: _,,.-7_630-627 8700
MC DUSTRIES INC
By ..... �.
I
11
1w w
BOARD OF PUBLIC WORKS
ATTEST:
Linda M. Martin, Clerk
I (Signature)
STEVE ROGGEMAN
(Printed Name)
CFO
(Title)
Gary A. Gilot, President
Elizabeth Maradik, Member
Therese Dorau, Member
Jordan Gathers, Member
Joseph Molnar, Member
12
CITY OF SOUTH BEND
INSTRUCTIONS TO BIDDERS
BID FORMS AND EXECUTION
A. Bidders are expected to examine the Drawings, Specifications, Proposal and all Instructions.
Failure to do so will be at the Bidder's risk.
B. Each Bidder shall furnish all information required by the Notice, Instructions to Bidders and
Specifications. Bids must be made on the form provided. The Bidder shall sign the Proposal
and Non -Collusion Affidavit, which is a part of the provided form, where indicated, provide a
notary signature and provide all other information required.
C. The Bidder shall sign the Proposal in the following manner: If the Proposal is made by an
individual, his/her name and post office address must be shown. If made by a partnership or
joint venture, the name and post office address of each member of the partnership or joint
venture must be shown. If made by a corporation, the Proposal must be signed by an officer
of the corporation or by a representative duly authorized by the corporation to execute the
Proposal in its behalf.
2. SEALED BIDS ONLY
A. Bids, Proposals, Guaranty, and other required documents must be submitted in a sealed
envelope marked on the outside with the general classification of material bids, i.e. "Bid for
Computer Equipment," "Bid for Front End Loader," or "Bid for Office Supplies."
B. When samples are required, such samples shall be delivered or shipped at the bidder's
expense to the address specified in the Invitation to Bid. Samples must be shipped
separately from bid documents and labeled clearly with the Bidder's name, address and the
commodity or equipment classifications and documents, the item (and item number, if any),
and Material Safety Data Sheets (if applicable). All samples must be representative of the
commodities or equipment which will be supplied by the successful Bidder. All samples will
become the property of the City of South Bend and none will be returned, unless otherwise
stated in the Specifications.
C. In the event of an inconsistency between provisions of the contract documents, the
inconsistency shall be resolved by giving precedence in the following order:
1 ORDER OF PRECEDENCE
A. Bid Form attached Proposal
B. Amendments to Specifications
C. Specifications
D. Special Provision
E. Instructions to Bidders
F. Notice to Bidders
4. DELIVERY OF BIDS
A. Bids must be delivered to the Office of the Board of Public Works, 131h Floor, County -City
Building, Room 1316, 227 West Jefferson Boulevard, South Bend, Indiana 46601 (574) 235-
9251, by the time specified (local time) in the Notice to Bidders. If not delivered personally,
the sealed envelope containing the Bid must be mailed to the following address:
City of South Bend
Clerk of the Board of Public Works
1316 County -City Building
227 West Jefferson Boulevard
South Bend, Indiana 46601
B. The Post Office Department will be considered agent of the Bidder in delivering the bid. The
City will not be responsible for deliveries. Any Bids received after the time specified will
be returned unopened.
13
C. Bids will be opened and read publicly at the time and place designated in the Notice to
Bidders. Bidders, their authorized agents, and the public are invited to be present.
D. Bidders may bid on one (1) or more item, provided however, that the bid submitted for each is
delivered in a separate, sealed envelope, with the envelope clearly labeled on the outside
as to the specific item for which the bid is being submitted. Bidders may submit separate bid
bonds for each item being bid upon OR may submit one (1) bid bond equal to 10% of the
combined total of all bids submitted.
E. The Board may reject any bid that does not conform to these requirements as non-
responsive.
5. ADDENDA— NO VERBAL INTERPRETATIONS
A. No inquiries by Bidders relative to interpretation of Plans, Specifications, Special Provisions,
or other Bidding Documents will be answered verbally. If any prospective Bidder is unable or
unwilling to comply with one or more requirements of the bidding document, such Bidder
should so inform the Board of Public Works in writing. Upon receipt of such information,
consideration will be given to the advisability of issuing an Addendum which would thereupon
become applicable to all Bidders. Any such inquiry must be submitted at least seven (7) days
prior to the bid opening date in order to give the Board sufficient time to consider any
necessary Addendum. All answers to such inquiries, in the form of Addenda, will be furnished
to all prospective Bidders who have registered with the City. All Bidders are required to
acknowledge receipt of any Addenda by inserting the Addendum number and the issuing date
on executed Proposals.
6. REJECTION OF PROPOSALS CONTAINING ALTERATION ERASURES, INCOMPLETE BIDS
AND ETC.
A. Proposals shall be rejected if they show any alteration of form, additions not called for,
conditional or alternate bids (except when and insofar as are invited), incomplete bids,
erasures or irregularities of any kinds.
B. All blank spaces for bid prices must be filled in, in ink, with the unit price and total price for
each item (This does not apply to divisible bids). In case of incorrect totaling of amounts and
where the unit price and the extension thereof do not agree, the unit price for each item shall
govern, and the City is authorized to correct all erroneous extension and totals for the purpose
of comparing bids.
7. TRADE DISCOUNTS
A. Trade discounts shall not be shown separately, but shall be incorporated in the Bidder's unit
price, unless otherwise specified.
VEHICLE BIDS
A. Bidders may bid on one (1) or more vehicles, provided however, that the bid submitted for
each vehicle is delivered in a separate, sealed envelope, by vehicle, with the envelope clearly
labeled on Bidders may bid on one (1) or more vehicles, provided however, that the bid
submitted for each vehicle is delivered in a separate, sealed envelope, by vehicle, with the
envelope clearly labeled on the outside as to the specific vehicle for which the bid is being
submitted. Bidders may submit separate bid bonds for each vehicle being bid upon OR may
submit one (1) bid bond equal to 10% of the combined total of all vehicle bids submitted.
B. The Board may reject any bid that does not conform to these requirements as non-
responsive.
9. TAX EXEMPTIONS
A. The City of South Bend is exempt from the payment of federal excise and transportation taxes
levied under the provision of the Internal Revenue Code. It is also exempt from the Indiana
State Gross Retail Tax (sales tax). The City will furnish the successful Bidder with any
certificate of exemption required.
10. WITHDRAWAL OF BIDS
A. Withdrawal of bids will be allowed only in those cases in which a written request to withdraw a
bid is received by the Board of Public Works prior to the date and hour for receiving and
opening bids. In such cases, the same will be returned to Bidder unopened.
14
IL ESCALATOR OR CONTINGENT CLAUSES
A. The use of escalator clauses or other contingent clauses by the Bidder is prohibited, unless
requested or permitted by the Invitation to Bid. No Proposal shall contain nor be
accompanied by any writing purporting to limit or qualify the City's right to accept such
Proposal or purporting to alter such Proposal or any Contract which may be executed
pursuant thereto.
12, PRICES MUST BE DELIVERED PRICES
A. The bid price shall be a delivered price. All materials shall be shipped F.O.B. destination as
specified in the Invitation to Bid. No fuel surcharges accepted.
11 AWARD — WAIVER OF TECHNICALITIES
A. The Award of Bid, if any award be made, will be made within sixty (60) calendar days after the
opening of Proposals to the lowest responsible and responsive Bidder who's Proposal
complies with all the requirements prescribed, exclusive of technicalities waived. Until the
final award of the Bid, however, the right is reserved by the City to reject any and all
Proposals and to waive technical errors.
14, SPLITTING OF AWARDS/DIVISIBLE BIDS
A. Bids will be awarded on the basis of the total dollar amount for all items in the Proposal unless
the bid is described by the City as a Divisible Bid. The City may award a Divisible Bid to the
lowest responsible and responsive Bidder for each item or class of items as indicated in the
bid documents.
15. BIDDER QUALIFICATION
A. The City may require any Bidder to submit evidence of qualifications, and may consider any
evidence of the financial, technical, and other qualifications and abilities of the Bidder. The
City will not award a Contract to a Bidder who, in its opinion, is not fully qualified on the basis
of financial resources and responsibility, possession of adequate equipment, personnel,
experience, and past record of performance to perform the obligations to be undertaken
competently and without delay.
16. PURCHASE ORDERS
A. A Purchase Order will be issued to the successful Bidder after formal acceptance of the bid is
made by the City.
IT NEW MANUFACTURE
A. Unless otherwise specified in the Invitation to Bid, the items offered shall all be new and the
latest model of manufacture.
18. SOURCE OF SUPPLY
A. If the Bidder is not a manufacturer, the source of supply must be shown and all sub-
contractors must be identified.
19. PACKAGING
A. All items shall be delivered strongly packed and marked according to accepted commercial
practice unless otherwise directed in the Specifications. No charge shall be made for
containers and the City shall have no obligation to return containers unless otherwise
provided by the Specifications or Special Provisions. Any items not received in good
condition will be rejected.
M INSPECTION OF GOODS
A. The City of South Bend reserves the right to inspect and have any goods tested after delivery
for compliance with the specifications. Notice of latent defects, which would make the item
unfit for the purposes for which they are required, may be given at any time within one year
after discovery of the defects.
B. All items rejected must be removed immediately by the Contractor at the expense of the
Contractor. If the Contractor fails or refuses to remove the rejected items, they may be sold
by the City of South Bend.
C. In some cases, at the discretion of the City, inspection of the commodities or equipment will
be made at the factory, plant, or other establishment where they are produced before
shipment.
15
D. The above provision shall not be construed in limitations of any rights the City may have
under any laws including the Uniform Commercial Code.
21. ASSIGNMENTS
A. No person to whom a Contract has been awarded may assign his interest in the Contract
without the consent, in writing, of the City.
22. CANCELLATION
A. The City of South Bend reserves the right to cancel any Contract for failure or refusal of
performance, fraud, deceit, misrepresentation, collusion, conspiracy, or any other misconduct
on the part of the Contractor.
21 DEDUCTION OF DAMAGES
A. If the City cancels the contract for any cause, it shall deduct from whatever is owed the
Contractor on the Contract or any other Contract, any amount sufficient to compensate the
City for any damages suffered by it because of the Contractor's wrongdoing.
24. METHOD OF INVOICING FOR PAYMENT
A. Contractor shall bill the City of South Bend
1. On regular invoice form giving a complete and detailed description of the goods delivered,
including purchase order number.
2. If the Contractor allows a discount, the period of time in which the City must make
payment to qualify for the discounts shall be computed from the date the City received the
invoice (completely filled out), or the date the goods are delivered and accepted,
whichever may be later, and shall not be less than twenty (20) days.
3. If more than one shipment is made under the Contract and on the same purchase order,
the City will make partial payments on a basis that is agreeable to both parties.
25. OWNERSHIP OF GOODS
A. The goods which are the subject of the Contract shall remain property of the Contractor until
delivered to and accepted by the City of South Bend.
26. ESTIMATED QUANTITIES
A. If the quantity set forth in the Notice to Bidders and Proposal is approximate and represents
the estimated requirements of the City for a specified period of time, the unit price and the
extended total price thereof shall be used only as a basis for the evaluation of bids. The
actual quantities necessary may be more or less than the estimate, but the City shall neither
be obligated nor limited to any specific amount. The City will, if at all possible, restrict
increases to twenty percent (20%) of the estimated quantity and will, if at all possible, restrict
decreases to twenty percent (20%) of the estimated quantity.
27, TERM "OR EQUAL"
A. Where the term "OR EQUAL" is used in these Specifications, the Bidder deviating from
specified item shall file with his/her bid a letter fully explaining and justifying his/her proposed
article or equal. The City of South Bend shall be the sole judge in determining if the "OR
EQUAL" offered meets the Specifications.
28. INDEMNIFICATION CLAUSE
A. The Contractor agrees to indemnify, defend, and hold harmless the City of South Bend, its
agents, officers, and employees from all costs, losses, claims and suits, including court costs,
attorney fees, and other expenses, arising from or out of the negligent performance of this
Contract by the Bidder or because or arising out of any defect in the goods, materials or
equipment supplied by the Bidder.
NOTE: Incoming mail does not reach the Board of Public Works until after 9:30 a.m. If
you are sending your bid via Federal Express or another overnight source, please
confirm that your package will arrive before the bid opening time and date.
16
Bid Bond
CONTRACTOR:
(Name, legal status and address)
McCann Industries, Inc.
543 S. Rohlwing Road
Addison, IL 60101
OWNER:
Warne, legal status and address)
City of South Bend
227 West Jefferson Blvd.
South Bend, IN 46601
D'ocument a 310TM 2010
Conforms with The American Institute of Architects AIA Document 310
SURETY:
(Name, legal status and principal place of buwinexw)
RLI Insurance Company
9025 N. Lindbergh Drive
Peoria, IL 61615
Mailing Address for Notices
BOND AMOUNT: 10% Ten Percent of Amount Bid
PROJECT:
(Name, location or addmn and Pr ojec! number, if aiti)
Spec A One (1) or More 2020 or Newer 6 Yard Front End Rubber Tire Loader
This document has Important
legal consequences. Consultation
with an attorney is encouraged
with respect to its completion or
modification.
Any singular reference to
Contractor, Surety, Owner or
other party shall be considered
plural where applicable.
The Contractor and Surety are bound to the Owner in tine anioutit set forth a�bovc. for the payment ofwhich the Contractor and Surety bind
flicroselves. their heirs, oxccutors, administrators, successors and assigns. jointly and severally, as provided herein, "fire conditions of this
Bond are such that if the Owwancr accc,pts the bid of file Contractor within the thttc specified in ilia Laid docuntcttts, or wilhin such (into period
as may be agreedto by the Owner and C:ontroctor, and [lie Contractor either (1,) caters into a contract with the Owwncr in accordance with
the ternis of such bid, mid gives such bond or bonds as may be specified in die bidding or Contract Documents, with a surety admitted in
the jurisdiction of the Project and otherwise acceptable to the Owvncr, for the faithful performance of such Contract and for the prompt
payment of labor and material furnished in the prosecution thereof. or (2) pays to the Owner the difference, not to exceed the amount of
this Bond, between the aniount specified in said bid and such larger amount for which the Owner may in good faith contract with another
party to peribmi the work- covered by said bid, then (his obligation shall be null and void, otherwise to remain in lull force and ellect. The
Surety hereby wvuives any notice of, an ugrceiwient between tiie Owner and Contractor to extend the time in which the Owner may accept llie
bid. Wuiver or notice by (lie Surety shall not apply to uny extension exceeding :sixty (60) days in the aggregate beyond the time Ibr
acceptance of bids specilied in the bid documents, and tile Owner usid Contractor shall obtain the Surely's consent liar an extension beyond
sixty (60) days.
If this Bond is issued in connection with a subcontractor's bid to a Contractor, the term Contractor in this Bond shall be deemed to be
Subcontractor and the tern Owner sliall be deemed to be Contractor.
When this florid has been ttirni:shcd to comply with a statutory or other legal requirement in the location ol'the Project, any provision in
this Bond conllicling wvilh said statutory or legal requirement shall be deemed deleted herellrom and provi%ions coniiimting to such
statutory or other legal requirement shall be deemed incorporated herein. When so famished, the intent is that this Bond sliall be construed
as a statutory bond and not as a cmnnwn law bond.
Signed and scaled this 24th day of March, 2020.
!11'inicss)
tLI Insurance Company
aurclyj
!lf lhPemv) Rebecca R: Alves
S-0054/AS 8/10 �e
RLI Insurance Company
Contractors Bonding and Insurance Company
9025 N. Lindbergh Dr. Peoria, IL 61615
Phone: 800-645-2402 Bond No. Bid Bond
Know All Men by These Presents:
That this Power of Attorney is not valid or in effect unless attached to the bond which it authorizes, but may be detached by the
approving officer if desired.
That this Power of Attorney may be effective and given to either or both of RLI Insurance Company and Contractors Bonding and
Insurance Company, required for the applicable bond.
That RLI Insurance Company and/or Contractors Bonding and Insurance Company, each Illinois corporations (as applicable),
each authorized and licensed to do business in all states and the District of Columbia do hereby make, constitute and appoint:
William Reidin er in the City of Schaumburg , State of II_ ,
it's true and lawful Agent and Attorney in Fact, with full power and authority hereby conferred upon him/her to sign, execute,
acknowledge and deliver for and on its behalf as Surety, in general, any and all bonds and undertakings in an amount not to exceed
Twenty Five Million Dollars ($25,000,000) for any single obligation, and specifically for the following described bond.
Principal: McCann Industries, Inc.
Obligee: City of South Bend
RLI Insurance Company and Contractors Bonding and Insurance Company, as applicable, have each further certified that the
following is a true and exact copy of a Resolution adopted by the Board of Directors of each such corporation, and now in force,
to -wit:
"All bonds, policies, undertakings, Powers of Attorney or other obligations of the Corporation shall be executed in the
corporate name of the Corporation by the President, Secretary, any Assistant Secretary, Treasurer, or any Vice President,
or by such other officers as the Board of Directors may authorize. The President, any Vice President, Secretary, any
Assistant Secretary, or the Treasurer may appoint Attorneys in Fact or Agents who shall have authority to issue bonds,
policies or undertakings in the name of the Corporation. The corporate seal is not necessary for the validity of any bonds,
policies, undertakings, Powers of Attorney or other obligations of the Corporation. The signature of any such officer and
the corporate seal may be printed by facsimile or other electronic image."
IN WITNESS WHEREOF, RLI Insurance Company and/or Contractors Bonding and Insurance Company, as applicable, have
caused these presents to be executed by its respective Vice President with its corporate seal affixed this 24th day of
March 2020
,
aceco
ffik
,,10„W10111.,,,,
,
�
��,,,
"'gyre, r
oox"o
.doorwo
SLAT,
M
SLALA
State of Illinois l 4 1 as
} SS
County of Peoria JJJ
On this 24th day of March , 2020, before me, a Notary
Public, personally appeared „ who
being by sate duly sworn, acknowledged that fie signed the above lower of
Attorney as the aforesaid officer of the RLI 'Insurance Company and./or
Contractors Bonding and .Insurance Company, and acknowledged said
instrument to be the voluntary act and deed of said corporation.
By:
Gretchen L. Johnigk Notary Public
GRETCHEN L JOHNIGK
'OFFICIAL SEAL"
Ar" My Commission Expires
May 26, 2020
RLI Insurance Company
Contractors Bonding and Insurance Company
Barton W. Davis Vice President
CERTIFICATE
I, the undersigned officer of RLI Insurance Company and/or
Contractors 'Bonding and Insurance Company, do hereby certify
that the attached Power of Attorney is in full force and effect and is
irrevocable; and furthermore, that the Resolution of the Company as
scat forth in the power of Attorney, is now in force, In testimony
whereof, I have heremito; scat ray hand and the seal of the RLI
Insurance Company Viand/or Corrtt°actna^s 'llonding and Insurance
Company this ?itt day of March 2020
RLI Insurance Company
Contractors Bondir_g and Insurance Company
10
BY:
Jean M w tephemoat Corporate Secretary
A00AI817
CASE
<,, `CONST„R,UCTIO,N'
Make
FPT
Model
F2CFE614H
Emissions Certification Tier 4 Final
Emissions Technology SCR/DOC
Type
4-stroke, turbocharged
and air-to-air cooled
Cylinders
6-cylinder in -line
Bore/Stroke
4.61 x 5.31 in
(117 x 135 mm)
__ ....--_ITITIT531
Displacement
------ -----------
in' (8.7 L)
Fuel
#2 Diesel, #1 and #2 mixture
permitted for cold temperatures
Fuel infection
Direct injection - electronic
Fuel filter
Replaceable, spin -on cartridge
Fuel pump
Bosch CP 3.3
Gradeability:
Side -to -side
35"
Fore and aft
35'
......... .......................
Air filter
2-element dry type
w/ warning restriction indicator
Rear -mount cooling module„
..._____....
Rear -mount air/water
.......
Fan - hydraulic
driven:
Style
9 blade puller
Diameter
36 in (914 mm)
.................-...........—..__.
Water pump
Integral
Engine oil pump operating angle ratings:
Side -to -side
35'
Fore and aft
35°
Oil filtration
Replaceable,
..................................................
full flow spin -on cartridge
....
Engine speeds
RPM
Rated - full load 2100
Horsepower:
Maximum Power Mode:
Peak gross @ 1800 RPM
320 hp (239 kW)
Net rated @ 2100 RPM
262 hp (195 kW)
Peak net @ 1800 RPM
296 hp (221 kW)
Standard Power Mode:
Peak gross @ 1800 RPM
297 hp (222 kW)
Net rated @ 2100 RPM
242 hp (180 kW)
Peak net @ 1800 RPM
273 hp (204 kW)
Economy Power Mode:
Peak gross @ 1400 RPM
253 hp (188 kW)
Net rated @ 1800 RPM
178 hp (133 kW)
Peak net @ 1400 RPM
241 hp (180 kW)
Torque - peak:
Maximum Power Moder
Gross @ 1100 RPM
1,091 Ib•ft (1 479 N•m)
Net @ 1100 RPM
1,064 Ib•ft (1 442 N•m)
Standard Power Mode:
Gross @ 1100 RPM
1,013 lb-ft (1 374 N•m)
Net @ 1100 RPM
986 Ib•ft (1 337 N•m)
Economy Power Mode:
Gross @ 1300 RPM
948 Ib•ft (1 285 N•m)
Net @ 1300 RPM
910 Ib•ft (1 234 N,m)
Torque rise:
Maximum power range 50%
NOTE: Gross horsepower and torque per SAE J1995,
Net horsepower and torque per SAE J1349,
'r
i�ii
Transmission:
4F/3R Proportional w/ Electronic Control
Module torque sensing autoshift/manual
shift and modulation
Gears_ Helical cut
Gear ratios Forward/Reverse
1 st 3.731 /3.731
2 nd 2.207 / 2.207
3rd 1.421/0.970
4th 0.625/ —
.....
Torque converter:
Stall ratio 3.089
Differential:
Auto locking Front Differential
Open Differential Rear
Rear axle oscillation _ 26' totalm
Front and rear axles Front/Rear:mmmmX
Differential ratio 4.25/4.50
Planetary ratio 6.35/6.00
Final axle ratio 27.00/27.00
Heavy-_ _...................
duty axles -standard:
Front axle equipped w/ locking differential
Rear axle equipped w/ open differential
Planetaries Outboard
Service brakes:
Hydraulically actuated, maintenance -free,
multiple wet disc w/ accumulator to all
four wheels
Brake surface area:
Front hub - each 1,144 in' (0.738 m2)
Rear hub - each 841 in2 (0.542 m2)
Parking brakes:
Spring -applied hydraulic release disc on
transmission output shaft neutralizes power
flow to wheels when engaged
_._.-._.-........... .....
.
Travel speeds - 4-speed transmission:
Forward Reverse
mph (kph) mph (kph)
1st 4.3 (7.0) 4.3 (7.0)
2nd 7.2 (11.6) 7.2 (11.6)
3rd 10.8 (17.4) 15.3 (24.6)
4th 22.0 (35.4) -
_...........................................-__................... —
NOTE: Travel speeds at full engine throttle
w/ 26.5-R25 L3 Radial tires.
1021G
Z-BAR/XR WHEEL LOADER
TIER 4 FINAL CERTIFIED
Vottage 24 Volts, negative ground
Alternator 120 am
Batteries (2) 12-volt
BOPS cab AC w/ heat; Key start; Articulated
power steering w/ tilt column; Fully adjustable,
suspension seat; Foot throttle; Single lever loader
control w/ fully adjustable wrist rest, 2 cup
holders; 2 interior rear view mirrors; 2 in (51 mm)
retractable seat belt; Multiple storage trays; Single
brake pedal; F/N/R shuttle switch; External
rearview mirrors; Pressurized air filtering;
Anti -glare window strip; Front and Rear Defroster;
Side window, partial/fully open; 2 Dome lights;
Wipers, rear and intermittent front; Windshield
washers, front and rear; Rubber floor mat; Horn.
Dispays/Gauges:
Digital:
Transmission oil temperature; Engine coolant
temperature; Fuel level; DEF level.
LCD screen:
Hour meter; Time; FNR indication; Trip
computer A/B; Metric/english; Differential
lock'; Engine speed; Automatic trans
indication; DeClutch indication; Fuel
consumption; Engine diagnostics; Error
reporting; Travel speed; Current gear
selection; Engine mode indication; Multiple
languages; Transmission diagnostics;
Warning prompts.
_........._.
Audible/Visual alarms:-...�..............
Warning lights:
Four-way flashers and turn signals; Brake
pressure; Lamp/high beam indication;
Grid heater".
Caution warnings:
Parking brake; Coolant temperature;
Hydraulic oil temperature; Transmission
oil temperature; Air filter; Transmission filter;
Hydraulic filter; Alternator; Low fuel.
Critical warnings:
Engine oil pressure; Brake pressure;
Steering pressure - w/ aux. steering'; Coolant
temperature; Hydraulic oil temperature;
Transmission oil temperature.
Backup alarm
Maintenance reminders:
Cab air filter; Engine oil filter; Fuel pre -filter;
DEF tank vent filter; SCR supply filter;
Hydraulic oil and filter; Engine air filter;
Engine coolant drive belt; Cab recirculation
filter; Engine breather filter; Transmission
breather; Front and rear axle fluid; SCR
supply module filter.
NOTE:: "- equipped w/ option_._ ...... ........_... ..._......_....
f of 7
Key, Inot Case Actual
Z-Bar
Unit equipped w/ ROPS cab w/ heater and
A/C; Standard counterweight; 26.5-R25 L3
Radial tires; 5.5 yd3 (4.2 m3) GP pin -on w/ bolt
on edge; Full fuel; 165 lb (75 kg) operator:
55,282 lb (25 075 kg)
XR
Unit equipped w/ ROPS cab w/ heater and
A/C; Standard counterweight; 26.5-R25 L3
Radial tires; 5.5 yd3 (4.2 m3) HD pin -on w/ bolt
on edge; Full fuel; 165 lb (75 kg) operator:
58,711 lb (26 631 kg)
Main pumps - steering/implement:
Closed center pressure/flow compensated
Tandem variable displacement - load -sensing
Max. rated flow Pi: 50.2 gpm @ 2000 RPM
(190 Umin @ 2000 RPM)
Max. rated flow P2: 42.8 gpm @ 2000 RPM
(162 Umin @ 2000 RPM)
Loader control valve:
Closed -center, sectional 2, 3 or 4-function
w/ control for lift, tilt and auxiliary hydraulics
Loader auxiliary steering: _
Hydraulic orbital center -pivot articulating
w/ on -demand oil flow
High pressure standby:
Implement 3,650 psi (25 165 kPa)
Steering 3.495 psi (24 097 kPa)
.....................
Filtration:
...
Filtered vent w/ relief on hydraulic reservoir,
maintains 3-5 psi on reservoir, 10-micron,
return filter furnishes only clean oil to all
components of the system
Fuel tank
125 gal (473.0 L)
DEF tank - Diesel Exhaust Fluid:
Usable capacity
16 gal (61.0 L)
Total _
24 gal (90.8 L)
Hydraulic system:
Reservoir
35.4 gal (134 L)
Total
66 gal (250 L)
Transmission:
Service w/ filter
12 gal (45.4 L)
Front and rear axle:
Front axle
65.5 qt (62 L)
Rear axle
44,4 qt (42 L)
Engine oil w/ filter ......_
30 qt (28.5 L)
Cooling system
15 gal (56.8 L)
Lift cylinder:
Bore diameter 7.00 in (177.8 mm)
Rod diameter 4.50 in (114.3 mm)
Stroke 30.73 in (780.6 mm)
...
Dump cylinder - Z-Bar and XR:
Bore diameter 8.00 in (203.2 mm)
Rod diameter 5.00 in (127.0 mm)
Stroke 22.91 in (581.9 mm)
Loader:
Z-Bar loader linkage; Single control for
lift and tilt; Positive hold float; Automatic
return -to -dig; Automatic height control;
Automatic return -to -travel; Brake pedal
transmission disconnect; Bucket position
indicator on bucket.
Cycle time:
Raise w/ rated bucket load 6.2 sec
Dump w/ rated bucket load 1.3 sec
Float down 2.8 sec
..--.---._-.....-...........�.-.w
Sound level in Cab (LpA) 69 dB(A)
Exterior sound level (LwA) 105 dB(A)
NOTE: Sound level data tested In accordance
with ISO6395, 6396, 3744.
1021G 2of7
J
'Engine- [-.-'PT Model l F2CFE614H (Fiat Power Technologies)
hinologies)
2) Minimum Horsepower: 331
***Maximum Horsepower: 320
3) Transmission Speeds: (S) Forward are (3) reverse
(4) Forward and (3) Reverse
Latta ro es 900 CCA
) Operating Weight:58,00011lbs. Minimum (ease Machias w/o Cplr/ kt'?)
""Operating Weight 8,00fts or greater (inn es IRIB Coupler and 6 Cu. Yd, Bucket)
I....leigh to'Top of RODS Cab 1.4 0 "
7 Warranty: S Year/10,000 Dour, (parts and I1...,albors engine and drive
warranty to be included.
5 Year/7,500 I....Nours.
Line drawings are for illustrative purpose only and may not be exact representation of unit.
r
A. Height to top of ROPS cab
...... ._.__...................�.--__....--...........-
140.8 in (3 577 mm) ,.
...............................--
Height to drawbar
45.0 in (1 143 mm)
B. Wheelbase ....
�..._. ._ ._...................................... 139.8 in (3 550 mm)
-
C. Ground clearance ........ ._-__.
17.2 in (437 mm)
.._.M................................ ................. -... ... ..--........... _..
D. Angle of departure
........._ . ............ ._.._.._..-_-. _._-.....--
23°
Width:
. ..... ....... _........._.-
Overall* without bucket
117.2 in (2 978 mm)
Centerline tread ...-..-..-........ __.__._ .........
90.6 in (2 300 mm)
�-.......
Turning radius* - outside - ...........................
250.6 in (6 366 mm)
Turning angle:
From center
40°
Total angle ..................._.........._..._...................................W ..
80*
Rear axle oscillation -total
_..__.._._.._._._._._._._26° .
NOTE: *Dimensions taken with 26.5-R25 L3 Radial tires. Additlonal dimensions on pages 4 through 5.
Tipping Load Tipping Load
Weight Adjustment Adjustment
Select Options Adjustment Straight: Deflected` 40' Turn: Deflected*
26.5 x 25 L5 Radial Tires +1,500 Ito (+680 kg) +1,179 lb (+535 kg) +1,056 lb (+479 kg)
NOTE: Unit equipped with Z-Bar loader arms, 5.5 yd3 (4.2 ml) pin on bucket w/ bolt -on edge, 26.5-R25 L3 Radial tires, ROPS cab with heater and A/C, full counterweight
front and rear fenders, full fuel and 165 lb (75 kg) operator. Adjust select options from rated weight.
*Tipping loads: ISO 14397-1 Deflected Tires.
1021G 3 of 7
1021 G Z-Bar"
4.75 yd3 (3.6 m3) Bucket
4.6 yd3 (3.5 m3) Bucket
5.5 yd3 (4.2 m3) Bucket
- _.............. ......-....._.._......0........................
with Bolt -on Edge - Pin On
with Teeth - Pin On
with Bolt -on Edge - Pin On
.....__..- ........
Operating weight
............._. ........._ _ _ _ ..._._.... ...�........ .....
..__- _u 56,106 lb (25 449 kg)
56,102 lb (25 447 kg)
................... 56,365 lb (25 567 kg)
E. Operating height - fully raised with spillguard
_._...........................W
224.4 in (5 701 mm)
.
224.4 in (5 701 mm)
229.3 in (5 824 mm)
._......_
F. Hinge pin height - fully raised
.....
167.2 in (4 246 mm)
---..�..... _ .W ..... ........
167.2 in (4 246 mm)
167.2 in (4 246 mm)
G. Overall length - bucket level on ground
347.6 in (8 829 mm)
354.8 in (9 011 mm)
352.3 in (8 948 mm)
Dump angle - fully raised
530
53°
53'
H. Dump height - fully raised, 45' dump
124.2 in (3 154 mm)
119.5 in (3 036 mm)
.uu._uuuuu- 121.2 in (3 078 mm)
J. Bucket reach - fully raised, 45' dump
................. _................. ..___.. ......_____
46.2 in (1 175 mm)
51.5 in (1 308 mm)
_ _.. ..___._ 49.8 in (1 265 mm)
K. Bucket reach - 7 ft 0 in (2.13 m) height, 450 dump
.............................................
72.0 in (1 829 mm)
75.3 in (1 913 mm)
74.3 in (1 888 mm)
L.WWWWDig depth
..._...... _. - _.
..................... 4.8 in (123 mm)
5.0 in (128 mm)
4.9 in (123 mm)
_ .......__-.
Operating load - I_SO Deflected Tires
18.033 lb (8 180 kg)
18,155 lb (8 235 kg)
_ 17,858 lb (8 100 kg)
Maximum material density - ISO Deflected Tires
............._... ...._.............-.._.._.._..............._.........._........_..........
3.796 Ib/yd3 (2 253 kg/m')
___.... �
3,947 Ib/yd3 (2 342 kg/m3)
3,247 Ib/yd3 (1 927 kg/m3)
_.�_.....
Tipping load - ISO Deflected Tires:
Straight
45,419 lb (20 602 kg)
45,730 lb (20 743 kg)
45,126 lb (20 469 kg)
40' turn
36,066 lb (16 359 kg)
36,310 lb (16 470 kg)
..............................
35,717 lb (16 201 kg)
Lift capacity:.
Full height
31,284 lb (14 190 kg)
31,225 lb (14 164 kg)
31,048 lb (14 083 kg)
Ground
53,070 lb (24 072 kg)
m
53,621 lb (24 322 kg)
52,015 lb (23 593 kg)
Breakout force with tilt cylinder
49,787 lb (22583 kg)
53,661 lb (24 340 kg)
45.056 lb (20 437 kg)
Loader clearance circle with bucket
555.7 in (14 115 mm)
560.6 in ( 14 238 mm)
558.2 in (14 177 mm)
1021 G XR
Operating weight
E. Operating height - fully raised with spillguard
4.75 yd3 (3.6 m3) Bucket
with Bolt -on Edge - Pin On
58,453 lb (26 514 kg)
247.3 in (6 282 mm)
4.6 yd3 (3.5 m3) Bucket
with Teeth - Pin On
...............58,449 lb (26 512 kg)
247.3 in (6 282 mm)
5.5 yd3 (4.2 m3) Bucket
with Bolt -on Edge - Pin On
58,711 lb (26 631 kg)
252.2 in (6 405 mm)
F. Hinge pin height - fully raised
190.0 in (4 827 mm)
190.0 in (4 827 mm)
190.0 in (4 827 mm)
.... - _.......... -
G. Overall length - bucket level on ground
368.0 in (9 348 mm)
375.2 in (9 529 mm)
372.7 in (9 467 mm)
Dump angle -- Wily raised
500
50°
50'
H. Dump height - fully raised, 450 dump
147.1 in (3 735 mm)
142.4 in (3 617 mm)
_ 144.1 in (3 659 mm)
�.................
J. Bucket reach - fully raised, 450 dump
46.7 in (1 187 mm)
52.0 in (1 321 mm)
50.3 in (1 278 mm)
--
-92.8
K. Bucket reach - 7 ft 0 in (2.13 m) height, 450 dump
90.3 in (2 294 mm)
93.9 in (2 385 mm)
_ in (2 358 mm)
L. Dig depth
f
5.0 in (26 mm)
5.2 in (131 mm)
5.0 in (127 mm)
�ITITmmmmm15,259
Operating load - ISO Deflected Tires
15,439 lb (7 003 kg)
15,533 lb (7 046 kg)
lb (6mm921 kg)mw
Maximum material density - ISO Deflected Tires
... ... --___.............mm----------,_,_,.-...-,_,
3,250 Ib/yd3 (1 929 kg/m3)
� -IT
3,377 lb/yd3 (2 004 kg/m3)
2,774 Ib/yd3m(1ITm646 kg/m3)
......ITIT
Tipping load -ISO Deflected Tires
Straight
38,219 lb (17 336 kg)
38,463 lb (17 447 kg)
37,816 lb (17 153 kg)
40' turn
30.878 lb (14 006 kg)
31,066 lb (14 091 kg)
30,518 lb (13 843 kg)
Lift capacity:
Full height
27,990 lb (12 696 kg)
42,661 lb (19 351 kg)
27,948 lb (12 677 kg)
43,039 lb (19 522 kg)
27,746 lb (12 585 kg)
41,798 lb (18 959 kg)
_Ground_ _
Breakout force with tilt cylinder
-� -
50,267 lb (22 801 kg)
54,190 lb (24 580 kg) -...........�_..........578.1
-,....,.,... 45,493 lb (20 636 kg)
Loader clearance circle with bucket
575.2 in (14 611 mm)
580.7 in (14 751-mm)
in (14 684 mm)
1021 G
Z-Bar/XR
Z-Bar/XR
Z-Bar/XR
................._............_ww _._._...................
Maximum rollback: Ground
44°/42°
45°/42°
44°/42°
Carry position
49°/48°
49°/48°
49°/48°
® Full height
................................................
65°/66°
65°/66°
65°/66°
Maximum grading angle with bucket - back dragging
61 °/63°
60°/62°
60°/63°
SAE bucket capacity - struck
4.07 yd3 (3.11 m3)
3,87 yd3 (2.96 m3)
4.75 yd3 (3.63 m3)
Heaped
4.75 yd3 (3.63 m3)
4,60 yd3 (3,52 m3)
5.50 yd3 (4.21 m3)
Bucket width - outside
125.8 in (3 195 mm)
126.9 in (3 223 mm)
125.8 in (3 195 mm)
Bucket weight
4,418 lb (2 004 kg)
4,413 lb (2 002 kg)
4,676 lb (2 121 kg)
1O21G 4 of 7
i,,,,,,,,,,,, ,,,,,,,;,,1,,.U„3„�,,,
1021'G Z-Bar* 5.3 yd3 (4.1 m3) Bucket with Teeth - Pin On
Operating weight
mm E. mmOperating height - fully raised with spillguard
F. Hinge pin height - fully raised
G. Overall length - bucket level on ground
Dump angle - fully raised _ H. Dump height_- fully raised, 45' dump
J. Bucket reach - fully raised, 45' dump
K. Bucket reach - 7 ft 0 in (2.13 m) height, 45° dump
�................................... .
L. nDig depth
Operating load - ISO Deflected Tires
Maximum material density - ISO Deflected Tires
µ Tipping load - ISO Deflected Tires:
Straight
40' t.... .......-..............
Lift
..�_.........
opacity:
Full height
Ground
Breakout force with tilt cylinder
Loader clearance circle with bucket
1021G XR
6,361 lb (25 565 kg)
229.3 in (5 824 mm)
167.2 in (4 246 mm)
359.4 in (9 130 mm)
116.5 in (2 959 r
55.1 in (1 399 r
77.5 in (1 969 r
5.0in(128r
17,980 lb (8 155
3,392 Ib/yd3 (2 013 kg,
45,428 lb (20 606 kg)
35,959 lb (16 311 kq)
30,993 lb (14 058 kg)
52,533 lb (23 829 kg)
48,219 lb (21 872 kg)
563.1 in (14 303 mm)
5.3 yd3 (4.1 m3) Bucket with Teeth - Pin On
Operating weight
�- ... ...._.. _ ...
.... .... .......I 58,707 lb (26 629 kg)
E. Operating height - fully raised with spillguard ._._....
252.2 in (6 405 mm)
_. ................ _..........................
F. Hinge pin height - fully raised
_.._ ...............
.... _ ........................................ _ ........ 190.0 in (4 827 mm)
G. Overall length - bucket level on ground
379.8 in (9 648 mm)
Dump angle - fully raised
....
50'
H. Dump height - fully raised, 45' dump
�... . _-___........... ........
................... ....... —
............ 139.4 in (3 541 mm)
J. Bucket reach - fully raised, 45' dump
_ �_.�.....
........ 55.6 in 1 411 mm
K. Bucket reach - 7 ft 0 in (2.13 m) height, 45' dump
_._... -........... _.._..__. ......
...._ ........ 96.3 in (2 446 mm)
L. Dig depth
. ............
............................... 5.2 in (131 mm)
Operating load - ISO Deflected Tires _
"---....-..�........... _. _.............
_ 15,346 lb (6 961 kg)
-
Maximum material densityISO Deflected Tires
2,896 Ib/yd3 (1 718 kg/m3)-
Tipping load - ISO Deflected Tires:
Straight
40' turn
...........
Lift capacity:
Full height
Ground
Breakout force with tilt cylinder
Loader clearance circle with bucket .........................
38,047 lb (17 258 kg)
30,692 lb (13 922 kg)
27,705 lb (12 567 kg)
42,153 lb (19 120 kg)
48,698 lb (22 089 kg)
583.7 in (14 826 mm)
1021 G
Z-Bar/XR
Maximum rollback: Ground
45°/42°
Carry position
49°/48°
Full height
65°/66°
Maximum grading angle with bucket - back dragging
._..�,.......,... ..................�
60°/62°
SAE bucket capacity - struck
...... . ..........
4.56 yd3 (3.49 m3 )
Heaped
5.30 yd3 (4.05 m3)
Bucket width - outside _. -... ................................................—
126.9 in (3 223 mm)
Bucket weight
4,672 lb (2 119 kg)
NOTE: 'Z-Bar performance data shown w/ standard counterweight.
Performance data unit equipped with 26.5-R25 L3 Radial tires, ROPS cab w/ heater and A/C, standard counterweight, full fuel and 165 lb (75 kg) operator.
Specifications per SAE J732, J1234, J695, J742, and J818.
1021G 5of7
See page 1
r KI r MI !i I
Case/FPT F2CFE614H
Tier 4 Final Certified
Selective Catalytic Reduction (SCR) with
Diesel Oxidation Catalyst
Selectable work modes:
Maximum power
Auto power
Standard power
Economy power
Automatic shutdown - idle reduction device
Turbocharger
Charge air cooling
Automatic fan belt tensioner
Integral engine oil cooling
Fuel filter with water trap
Dual -element dry -type air cleaner
Hydraulic -driven cooling fan
Air-cooled radiator
Rear -mounted cooling module
Common rail electronic fuel injection
RNM
See page 2 - Operating weight,
Other specifications
r `
4-wheel drive
4F/3R Selectable autoshift/manual
shift transmission
Electronic Control Module — programmable,
computer controlled proportional shifting
with programmable gear selection
Onboard diagnostics
Heavy-duty axles:
Larger size axles front and rear with auto
locking differential on front axle, open
differential on rear axle.
Single lever electronic shift control
F/N/R switch in loader control handle
Downshift button
Torque converter
Outboard planetary axles
Transmission oil cooler
Brake pedal transmission disconnect
Hydraulic wet disc brakes
Spring -applied hydraulic release
parking brake
Limp -Home Mode
Greasable rear axle trunnion
r
Electro-hydraulic (EH) joystick loader control
Low -effort steering
Hydraulic driven fan
8 Diagnostic quick couplers
Split flange hydraulic connections -
1 inch or greater
Hydraulic oil cooler
rr !r r r
r /i �f//f�% %�
120 amp alternator and voltage regulator
Battery isolator/electrical disconnect
(2) 1000 CCA 12-volt batteries
Electric starter
Lights:
Front and rear halogen flood lights
2 Front driving headlights - high/low beam
2 Front flood
2 Rear flood
2 LED stop and tail lights
Front and rear turn signal/flash
Key start/stop switch
Centrally located fuse box with all electrical
circuits protected
Backup alarm
Remote jump start posts
Electric hood lift
Front and rear fenders, partial coverage
Standard counterweight
Drawbar hitch
Articulation locking bar
Lift arm locking bar
Lift and tie -down points - front/rear
Backup alarm
3-piece rims
Grouped remote -mounted ecology drains:
Engine oil
Engine coolant
Hydraulic oil
CASE SiteWatchTM Telematics - includes
hardware and a 3-yr Advanced
data subscription
1O21G 6 of 7
Cloth -covered heated air -suspension seat
Leather trimmed heated air seat with
active suspension
Cloth mechanical suspension seat
3 in (76 mm) retractable seat belt
Sound Shield noise suppression package
Bluetooth radio, 12V AM/FM with
auxiliary input
Radio -ready -12 or 24-volt
with auxiliary power -12-volt
Cab convenience package:
Rear sun shade, interior mirror, under the
seat drawer, coat hook, 12V accessory
port, and an ash tray
In cab powered cooler box
In cab accessory mount
LED rotating beacon
Joystick steering
Rear view camera
External rear view mirrors
External heated rear view mirrors
Front LED driving/headlights
LED front and rear work lights
Extra front -facing LED work lights
;ddl l 11u11 U'Ia1/+,Ir ,w 1I III1I I I t ao IvI eh , 1: 19 +
Irs,Iflrulrlsi Ip,P 1i1311',11u IJul1a'h,,Ifi1I u1r 1 11111„1111l'1oIIln'Iri,h
„wd r=/ro 14 11 11 c tr ,I11,111IIII,IIrIIIa1I1.J 1I, 1»Ifhulr lI
I iI, 1JIJIIIrI j, IIaI, ,I�I,I ;j1iA11LIIaJkI(1111 I),II1,II rI'I
III), IA I,1 r1)Iji°INC-; 11 , uInd I ly I, I Iwo &Id to CH 11I a 11 i';Irlv1
d;I;Iu1i=!III VI11h1,,, l wrlr;1111 1 I, a 0i tl,tlu, IM1
oyo"o'ma I111aa. G C E20Y "70810?1G
114, 1, ur.r;k'`lurrPly lCCI:J1116101PI(I
Open type differential axle, front and rear
Axle coolers
Axle oscillation stops
Cold weather package:
Engine block heater
Fuel heater
Hydraulic oil cooler bypass
Low temperature hydraulic oil
Grid heater
Auxiliary hydraulics
Ride Control'"
Secondary steering
3- or 4-function loader valves with 2- or
3-lever loader control
R/10I,I,VJI,, gI)Ip1I1(',nf,II1;� flIIeIii)III
ii11i Iih 111 �1:;r1„11h �IUI'rsf iuuulluu,i�;;,= �i11 �,dl,r;uth, uiliil
joy 10I11,ofa.,ll lr�Ialgj 11) I)d'ulh1111a ftilall,alnllll u9111)0I1 S
:tru'11 r1)II)II II1 [rJlbf, ! a1! ,ff;v;11111Ir/1 to lh,^,1,o III]); 1�I v-hh,l.1hri
Uo I,IgIIMIItN In.IJ1,afIdaMIrI ,i]IHI9 iv,i llullu1up dI�J�1+il
011 Ilrlvu,11131 d ICI , ,u1i taol u1,i 1110 ildlI 11 d1,,Prai10,11 J
I Idpi 1rI11 I1mj R i,, jo/'91 91IInrfI ji ,. d hi II Ili U) glvI JI°,I
,I ^1 rd" , f lhr NfAl l l u7 a 11 l 3l1 , Jpucd , nlllri li, �A, dl ahk, In'f' 11 Aim'')
Extended Reach XR
Attachment auxiliary hydraulics
Buckets - see pages 4 and 5
26.5 x 25 L3 Bias
26.5-R25 L3 Radial
26.5 x 25 L5 Bias
26.5-R25 L5 Radial
Variable speed hydraulic reversing fan
Sy-Klone® ejector type pre -cleaner
Special paint
Tool box
Fire extinguisher
Side guards for rear frame
License plate brackets, front and rear
12 mph (20 kph) maximum speed control
Wide full coverage fenders with right and left
hand steps
I
fq°Fl,�/,v ,IM . 1 , u ^,1rl.ldlwl 111111fll 1 ffl N,AII ,,1..
+ ",rll�'a vul) 'lliInxllY NOII.::.,Adofi1pr1:;;,11u,Nculuul I.IIIA
1i�11u i r,' i+;t;11,i111 un All y31 r III,,,i11ulL> r�u'0
GI,a1,,1u1 r11n111,f11 vdflh M1 "I Ol jd IIII
I''G+I,luIII] n )dl)d hil)I�I ri11 II, IppliiJa1hle
AA�,p III M'-'�W m" @ WN) f^ ld U'Ik (a110 l Yhai t'�A rrfl Id lle,, ul'�
�".M Nil: WILR IId4 NIIS
uvlar r,ltrlor ,alrh va�I v1 un � �d 0n,;q a V � tp+v7dfrtli;nN
1a14IrlIius[II,JII, 11III v;;I„Iv("01 rgvaimlfnl,r,,y
piglnlly,111 ]10�:1vydI1( l IrlI[10, u1v1y kpl„tflrl
lug. ^ ti q WIWIy Ir w lens f+ivae,IQ)d
C 1G 7 of 7
a pn ,Ill
C,11 r I TI
from I f:11Nc fil C
hi, "C"', 4Ali aped
III c, 1) I 9.o
Dual hydraulic cylinders allow independent
actuation of each cylinder for clamping
uneven loads.
P EA331W A
tag �'4 y r:,Id i ii'(1,"',
I I- n 1 1 il I " P, J I' (I I I I f�5 fitII
"C" shaped radius
Multi -tine grapples allow for better material
retention.
BRADCO rp CUSTOhWORKS FFC HARLEY J;S hl a M I L LCE N SWEEPSTIM
01 Erl��z� :rot �i�� i ,,11(i1mf'Iro.�, ��,311 �J c III)r, iiIId Vor,i�r 1ia117rIng
"�w °�q(r�I�.�i�7�1 II(u(:Iliu��� r,��.r,:f :�� auir�ll ��Il,la�u� I�b�u1l�,rl�gltu Ilalrttl�r,uru ��rVu1rIV
M IIti 1 1)1, I(I�i yll I, o t01>>r,11,111
'1 Ilr4.f V,i"I k:� il'ry�('11 a wvI kI�fi�Jr➢(,IKI(JIIV ritl,luUt' II11r 4U1 i"9�cV �IV �,ii'�lIII: l k' 111�111InV'I„fVNov(J I r1a,Is
q„V(1I1 �I 's deIJaI's a fail�ll�i(�
fiI)I[� a II V rI l rarr,,%fIV11I JI", , (Glul1rk ",ouIp'ileIr.��r� pr;, 11
(IIoI i.dI'.1 II II dr',I III n 211 Ir1}rr;i Vun i .qlIlI"or 411;1(""ZZ11111
A. Catalog Number
150GBR
225GBR
30OGBR
350GBR
45OGBR
60OGBR
B. Capacity (Cubic Yard)
1.50
2.25
3.00
3.50
4.50
6.00
D. No. of Tines
8
8
8
8
9
10
"A" Maximum Opening
61.35"
71.42"
74.83"
74.83"
100.891,
119.59"
"B" Minimum Opening
20.99"
26.39"
28.94"
28.94"
35.32"
45.35"
"T" Tine Spacing
12.25"
13.25"
13.86"
13.86"
14.14"
12.69"
"W" Width
92.00"
94.00"
99.00"
99.00"
113.50"
117.50"
Weight
1,822lbs.
2,326lb&
4,693lbs,
4,723lbs.
7,170lbs.
8,500lbs
"Paladin attachments have the
durability and performance l
can always count on."
r o, Jim W.., Construction Contractor
www,
m
820 Glaser Parkway, Akron, OH 44306 II PH: (800) 428.2538 II You gon
POWERFUL AT VM,,CH MEET TODL1 9
ir�ir r I
GRAPPLE BUCKET RAKE
ASSEMBLY# 90Z0088 (PAGE 1)
ITEM REQ'D
1
2
3
4
5
6
7
8
1
2
2
4
4
4
2
2
2
4
1
Illustration may vary from
actual equipment
PART Nth,
D18485
DESCE11PIUN
Backframe Assembly
A15942
Long Pivot Pin Assembly
A18638
Short Pivot Pin Assembly
104050130100
.50"-13 x 1.00" Hex Capscrew GR8
158050000000
.50" Flat Washer
162050000000
.50" Lock Washer
A16440
Cylinder Base Pin
104038160400
.38"-16 x 4.00" Hex Capscrew GR8
148038160000
.38"-16 Lock Nut
A31294-1
Grease Fitting
96Z0006
Hydraulic Kit
8-21-14
1 800-428-2538 1 www.paladinattachments.com 90Z0088
GRAPPLE BUCKET RAKE
ASSEMBLY# 90Z0088 (PAGE 2)
ITEM
REQ'D
E613I NQ.
1
2
D13193
2
4
A15968
3
4
A18636
4
2
A16442
5
2
104050130100
2
158050000000
2
162050000000
Illustration may vary from
actual equipment
Clamp Assembly (includes Item # 2 & 3)
Bushing
Bushing
Cylinder Rod Pin
.50"-13 x 1.00" Hex Capscrew GR8
.50" Flat Washer
.50" Lock Washer
2 800-428-2538 1 www.paladinattachments.com 9OZ0088
�q
BY PALADIN
QCTL Utility Tractor Loader Angle Sweeper- Heavy duty cleanup
Hydraulic Drive
UtilityCS
Utility Tractor Loader Collector Sweeper- Heavy duty cleanup, hydraulically -activated high
Tractor
Loaders Hydraulic Drive dump, front mounted hopper
Utility Tractor Loader Collector Sweeper Heavy duty cleanup, hydraulically -activated high
VCS with Waterless Dust Abatement- dump, front mounted hopper, waterless dust
Hydraulic Drive abatement
• Heavy duty cleanup, millings, snow removal
• Powered from loader hydraulics
• 10-36 GPM flow required
• 32" brush diameter
• 5', 6', 7' brush widths available
• Quick attach and pin -on mounts available
• Mechanical angle standard, hydraulic optional
• Quick change core
Specifications
Model #
Width
Width
Motors
Brush
Weight
GPM
30'
Diameter
(approx.)
Range
22059
60"
54"
single
32"
793
10-18
22060
60"
54"
single
32"
793
12-25
22061
60"
54"
dual
32"
829
18-36
22071
72"
64"
single
32"
852
10-18
22072
72"
64"
single
32"
852
12-25
22073
72"
64"
dual
32"
890
18-36
22083
84"
75"
single
32"
915
10-18
22084
84"
75"
single
32"
915
12-25
22085
84"
75"
dual
32"
953
18-36
22096
96"
85"
single
32"
982
12-25
22097
96"
85"
dual
32"
1,022
18-36
t III Ai„Return to Table of Contents %�
ju
BY PALADIN
"i n tj l'o d (I f [i (,,, i it vu 11 �i
oiv 111)4r�e'd Dfl
Ndoci fol,
fil,
ICII'Wh"kird
dMil"d
.,qw6k,fl oaJf?[ c�m'la�oe akfth
,anti lliw avadali,dc
Cfdl M3
Construction Utility Forks
Class 100, 600-900
J R F' l"; u 1, 1 "irl"�ctlon PHI'Ly IFixks Loy, ':'ak'adln Yurn wtlr�id inbci hp��'ivy dui 'y
'r S4-'J-I'dy l 1Y': lll:lpu�i lo'ads od, �,xmsl '1'jchW I
Hydraulic Option Available
Easy Manual Tine Placement
JRB Quick Hitch Mount Standard,
Pin -On Mount Available
i 11RA3LAID I I Po
- 114" -The wer of Combined Excellence'—
F BRADCO CP CUSTOWOFIKS FFC HARLEY j -.8 MCMILLEN SWEEPSTER
1-
dkav i[aat�lla; With urnaainu,,.fl tii adju.o:rtnlalaa fires, or dryv��uaa[irsOlyt
rnr,lhiIne's foli- sicOtn -Jo - side iroin the, c;ab
Third kiru("tioin lolaaat r Vrydrai.uN,r,and j,i.iir finer r Iliosan kit
k)lr ttaaiclr ra:rtuir:d flof Irydruuhr; tsnl earrr tivn.
flydraais600a kairlks Mili r util ar:krnrsint ,>Ae nAlhip h ase,s
firer; ,tairic Road :.,apaaclt ss are mated loa.;rond
�oja(lrr Inlli, r;aiiaablhiliss
* V=euirlk carria,gle vvidIhs mnge tironi 60 " to 106''
'a.finern rra Inge tiraaina 48" to 96"
ttptioi,4 hydraulic Mde shifr roWi us aaraaolaNe,
JRB Wick Hltr,,h Maa nru�t a�,�tlindard, flin-sue li.-ipklrrro�s avaadzflde
"Paladin attachments have
what it takes to get the job
done quickly and efficiently."
Ron C. - Equipment Dealer
You ru
POWERFUL AnAcldmizil,.m_s 820 Glaser Parkway, Akron, OH 44306 II PH: (800) 428.2538 II
w
Snow Pushes
The FFC Snow Push, by Paladin is engineered of heavy-
duty, fully welded steel with 3/8" thick end plates to
capture and remove even the heaviest snow without
leaving windrows or spillover. For SSL, Compact Utility
Loaders, Small Wheel Loaders and Backhoe Loaders.
• Moves large volumes of snow efficiently.
• Rubber edge standard on all models.
• Ideal for waste water, manure, feed lot and food
cleanup.
• Optional Pull Back Kit draws back snow from
buildings, fences and confined areas.
Model
. ° PthtNth
Working `
`Height
Depth
DveragA
`4ldth
Weight
;
(approx)
22812
142.5"
48.8"
71.8"
149.7"
2485
22814
166.5°"
48.8"
71.8"
173.7"
2660
22816
190.5"
48.8"
71.8"
197.7"
2835
22820
238.5"
48.8"
71.8"
245.7"
3185
Carrier Specifications: Lift Capacity: <9,500 Ibs; Operating Weight <30,000 Ibs
r r
r
r• r
Model
Patfi Wudth
'Working
Depth8roV"
23272-0022
71.5"
23.7"
38.1"
77.3"
525lbs
23284-0022
83.5"
1 23.7"
38.1"
89.3"
570lbs
23296-0022
95.5"
23.7"
38.1"
101.3"
610lbs
23220-0022
119.5"
1 23.7"
1 38.1"
125.3-
705lbs
Carrier Specifications: Lift Capacity: <9,500 Ibs; Operating Weight <11,500 Ibs
Carrier Specifications: Lift Capacity: <11,000 Ibs; Operating Weight <20,000 Ibs
Subject to change without notice.