HomeMy WebLinkAboutOpening of Bids - Spec U - One or More 2019 or Newer Single Axle Multi Use Dump Truck - Truck Centers Inc° 1
BID/PROPOSAL
CITY OF SOUTH BEND
BID NAME Spec U - One (1) or More 2019 or Newer Single Axle Multi -Use Dump Truck
FOR BIDS UE October 22, 2019; 9:30 a.m.
Description
Complete Unit
Year/Make/Model
2021 Freightliner Model 114SD
$
Unit Price
176,508.00
Alternate# — Description
Cost
Total
1 Front Snow Plow
$ 10, 435.00
$
10, 435.00
2 CNG Fuel System
$ 40,716.00
$
4 0 , 716.0 0
3 Electric Plow Controls
$ 5,163.00
$
5,163.00
Estimated number of days for delivery from award
270 Days
date.
Bidder (Firm): Truck Centers, Inc.
Address: 1011 W. Sam le St.
City/State/Zip: South Bend, IN 46619
Telephone Number: 574-289-4065 Fax Number: 574-289-1497
By .p�
S) nature)
Rich Stopczynski
(Printed Name)
BOARD OF PUBLIC WORKS
Gary A. Gilot, President
David P. Relos, Member
James Mueller, Member
30
Sales Executive
(Title)
Therese J. Dorau, Member
Elizabeth A. Maradik, Member
Attest: Linda M. Martin, Clerk
BID NAME
FOR BIDS DUE
CITY OF SOUTH BEND INIIANIA
SELLER'S BID FOR SALE OR LEASE OF MATERIALS
AND NON -COLLUSION AND NON DEBARMENT AFFIDAVIT AND
NON-DISCRIMINATION COMMITMENT FOR SELLERS
Spec U —One1 or MoreIT2019 or Newer Single Axle Stainless Steel Multi -Use Dump Truck
October 22,, 2019; 9:30 a.m.
Bidder
Date: October 17, 2019 (Firm): Truck Centers Inc.
Address: 1011 W. Sample St.
City/State/Zip: South Bend IN 46619 Telephone Number: (574) 289-4065
Agent of Bidder (if Applicable) Rich Stopczynski, Sales Executive
When the prospective Contractor is unable to certify to any of the statements below, it shall attach an explanation to this Affidavit.
CONTRACTOR'S NON -COLLUSION AND NON -DEBARMENT AFFIDAVIT,
CERTIFICATION REGARDING INVESTMENT WITH IRAN, EMPLOYMENT
ELIGIBILITY VERIFICATION, NON-DISCRIMINATION COMMITMENT AND
CERTIFICATION OF USE OF UNITED STATES STEEL PRODUCTS OR FOUNDRY
PRODUCTS
(Must be completed for all quotes and bids. Please type or print)
STATE OF
SS:
The undersigned Contractor, being duly sworn upon his/her/its oath, affirms under the penalties of perjury
that:
1. Contractor has not, nor has any other member, representative, or agent of the firm,
company, corporation or partnership represented by him, entered into any combination,
collusion or agreement with any person relative to the price to be bid by anyone at such
letting nor to prevent any person from bidding nor to induce anyone to refrain from
bidding, and that this bid is made without reference to any other bid and without any
agreement, understanding or combination with any other person in reference to such
bidding. Contractor further says that no person or persons, firms, or corporation has, have
or will receive directly or indirectly, any rebate, fee, gift, commission or thing of value
on account of such sale; and
2. Contractor certifies by submission of this proposal that neither contractor nor any
of its principals are presently debarred, suspended, proposed for debarment, declared
ineligible, or voluntarily excluded from participation in this transaction by any Federal
department or agency; and
3. Contractor has not, nor has any successor to, nor an affiliate of, Contractor, engaged in
investment activities in Iran.
2
a. For purposes of this Certification, "Iran" means the government of Iran and any
agency or instrumentality of Iran, or as otherwise defined at Ind. Code § 5-22-16.5-5,
as amended from time -to -time.
b. As provided by Ind. Code § 5-22-16.5-8, as amended from time -to -time, a Contractor
is engaged in investment activities in Iran if either:
i. Contractor, its successor or its affiliate, provides goods or services of twenty
million dollars ($20,000,000) or more in value in the energy sector of Iran;
or
ii. Contractor, its successor or its affiliate, is a financial institution that extends
twenty million dollars ($20,000,000) or more in credit to another person for
forty-five (45) days or more, if that person will (i) use the credit to provides
goods and services in the energy sector in Iran; and (ii) at the time the
financial institution extends credit, is a person identified on list published by
the Indiana Department of Administration.
4. Contractor does not knowingly employ or contract with an unauthorized alien, nor
retain any employee or contract with a person that the Contractor subsequently learns is
an unauthorized alien. Contractor agrees that he/she/it shall enroll in and verify the work
eligibility status of all of Contractor's newly hired employees through the E-Verify
Program as defined by I.C. 22-5-1.7-3. Contractor's documentation of enrollment and
participation in the E-Verify Program is included and attached as part of this bid/quote;
and
5. Contractor shall require his/her/its subcontractors performing work under this
public contract to certify that the subcontractors do not knowingly employ or contract
with an unauthorized alien, nor retain any employee or contract with a person that the
subcontractor subsequently learns is an unauthorized alien, and that the subcontractor has
enrolled in and is participating in the E-Verify Program. The Contractor agrees to
maintain this certification throughout the term of the contract with the City of South
Bend, and understands that the City may terminate the contract for default if the
Contractor fails to cure a breach of this provision no later than thirty (30) days after being
notified by the City.
6. Persons, partnerships, corporations, associations, or joint venturers awarded a
contract by the City of South Bend through its agencies, boards, or commissions shall not
discriminate against any employee or applicant for employment in the performance of a
City contract with respect to hire, tenure, terms, conditions, or privileges of employment,
or any matter directly or indirectly related to employment because of race, sex, religion,
color, national origin, ancestry, age, gender expression, gender identity, sexual
orientation or disability that does not affect that person's ability to perform the work.
In awarding contracts for the purchase of work, labor, services, supplies, equipment,
materials, or any combination of the foregoing including, but not limited to, public works
contracts awarded under public bidding laws or other contracts in which public bids are
not required by law, the City, its agencies, boards, or commissions may consider the
Contractor's good faith efforts to obtain participation by those Contractors certified by
the State of Indiana as a Minority Business ("MBE") or as a Women's Business
3
Enterprise ("WBE") as a factor in determining the lowest, responsible, responsive
bidder.
In no event shall persons or entities seeking the award of a City contract be required to
award a subcontract to an MBE/WBE; however, it may not unlawfully discriminate
against said WBE/MBE. A finding of a discriminatory practice by the City's MBE/WBE
Utilization Board shall prohibit that person or entity from being awarded a City contract
for a period of one (1) year from the date of such determination, and such determination
may also be grounds for terminating the contact for which the discriminatory practice or
noncompliance pertains.
7. The undersigned contractor agrees that the following nondiscrimination
commitment shall be made a part of any contract which it may henceforth enter into with
the City of South Bend, Indiana or any of its agencies, boards or commissions.
Contractor agrees not to discriminate against or intimidate any employee or applicant for
employment in the performance of this contract with privileges of employment, or any
matter directly or indirectly related to employment, because of race, religion, color, sex,
gender expression, gender identity, sexual orientation, handicap, national origin or
ancestry. Breach of this provision may be regarded as material breach of contract.
I, the undersigned bidder or agent as contractor on a public works project, understand my
statutory obligations to the use of steel products or foundry products made in the United
States (I.C. 5-16-8-1). 1 hereby certify that I and all subcontractors employed by me for
this project will use steel products or foundry products made in the United States on this
project if awarded. I understand I have an affirmative duty to notify the City in my bid
that my proposal does not include the use of steel products or foundry products made in
the United States. I understand it is my sole obligation and responsibility to provide a
justification to the City, subject to review and approval, why the cost of United States
made steel or foundry products is unreasonable. Prior to award and upon submission of
bid which does not use steel products or foundry products made in the United States, the
City, through its director of public works, shall make a determination if the price of
United States made steel or foundry is unreasonable. I understand that violations
hereunder may result in forfeiture of contractual payments.
rd
I hereby affirm under the penalties of perjury that the facts and information contained in the foregoing bid
for public works are true and correct.
Dated this .,_..._. % 7 7_....... day of ; 20 1 �/
Si- ILA WALLACE,
c Notary Public
• SEAL A Resident of St. Joseph County, IN
Commission No. 684431
OF My Commission Expires 04/28/2024
�.��...Al�.�............__._...�.
Contractor/Bidder (Firm)
�t t�vre of ° ��n � � w�°��"C��a�clm��r• or Its Agent
Printed Name and Title
Subscribed and sworn to before me this day of ��� f� 20
P
JMy Commission Expires. _...................... ........ .._.....___....
Notar Public
County of Residence
(To be completed only by Cottlrrrctors/Bidtlers cialnritig to be a "local Indi(uta bnsiiiess" ptirsuarrt to LC 36-1-12-22)
INDIANA LOCAL BUSINESS PREFERENCE CLAIM
A 'local Indiana business" refers to any of the following:
(l) A business ishose principal place of`bitsiness is located in an cffc4c.led county.
(2) A business thal pays a nicrlorib, opts payroll (in dollar vola ine) to residents of offecwted Ctrnties.
(.) A bitsiness than employs resiclerats tf a'affccied eminta,ts as a najority of its eniplcryeev.
O A btrsrness that iarakcs signiftont ccaprtal iiaveslrrierits in the r ft,cted connties as deflned in rules adopted by the political
subdivision.
(5) A business that has a substantial positive econontic impact on the affected counties as defined by criteria in Titles adopted by
the political subdivision.
An "qjjecied cotenty " refers to St. Joseph Counly, Indiana, or the f bllotiving cotinties located adjacent to St. Joseph County:
Elkhart Coinay„ itlarshall Cminly, Starke County and LaPorte Cotinty
There are the following price preferences for supplies ptirchased from a local Indiana business:
• 5% for a purchase expected by the purchasing agency to be less then $50, 000
• 3% for a purchase expected by the purchasing agency to be at least $50, 000 but less than S 100, 000.
' 1 % br a lr-chase enc o beat least $100,0Wrr
Date: 10-22-19
Pursuant to I.C. 5-22-15-20.9, um Truck Project # �claims a local Indiana business
k Centers Inc. _
preference for Project Single Axle D„ . p rq ( j ec U located within the City of
South Bend, St. Joseph County, Indiana.
❑X The location of the principal place of business is 1. 011 _
ter<tzt� µit
® St. Joseph County, Indiana
❑ The following county located adjacent to St, Joseph County, Indiana:
❑X The majority of the business's payroll for the 12 months prior to the date of this Bid is to residents of St.
Joseph County, Indiana or the adjacent county noted above.
The majority of the business's employees for the 12 months prior to the date of this Bid are residents of
St. Joseph County, Indiana, or the adjacent county noted above.
If the business is deemed to be the apparent lowest, responsible, responsive bidder, then it sliall provide
stipporting documentation for the 12 month period prior to the date of the Bid of (i) the total payroll
atnotrnt paid to all employees of the business, and (ii) the total payroll amount paid to employees who are
residents of St. Joseph County and the adjacent county noted above,
WHEN SUPPLYING SUPPORTING PAYROLL RECORDS, BIDDER, `-JAL L RED CT AI' L
SOCIAL SECURITYNUMBERS.
Dated this 22nd day of October , 20 19
Truck mmCenters, ___Inc.
Contractor/Bidder (Finn)17 l�
412911"a'11
ire . f o 61
c Bidder or Its Agent
Rich StoiDczvnski, Sales Executive
Printed Narne and Title
r
A"'+ilr�;%
1_1111" A-1
CONTRACTOR:
(Name, legal status and address)
TRUCK CENTERS INC.
1011 W. Sample Street
South Bend, IN 46619
OWNER:
(Name, legal status and address)
CRT, of South Bend
104"a W. Sam le Street
South Bend, FIN 46619
SURETY:
(Name, legal status and principal place ofbusiness)
Travelers Casualty And Surety Company Of
America
One Tower Square
Hartford, CT 06183
Mail Notices To:
Travelers
Attn: Surety Claim Dept.
One "Tower 'Square 2S1A
Hartford, CT 06183
BOND AMOUNT: Ten Percent of the Amount Bid ----------------- dollars ($10% of Amount Bid)
PROJECT: Spec U- One Single Axle Multi -Use Dump Truck
(Name, location or address, and Project number, if any)
This document has important
legal consequences.
Consultation with an
attorney is encouraged with
respect to its completion or
modification.
Any singular reference to
Contractor, Surety, Owner,
or other party shall be
considered plural where
applicable.
The Contractor and Surety are bound to the Owner in the amount set forth above, for the payment of which the Contractor and
Surety bind themselves, their heirs, executors, administrators, successors and assigns, jointly and severally, as provided herein. The
conditions of this Bond are such that if the Owner accepts the bid of the Contractor within the time specified in the bid documents, or
within such time period as may be agreed to by the Owner and Contractor, and the Contractor either (I) enters into a contract with the
Owner in accordance with the terms of such bid, and gives such bond or bonds as may be specified in the bidding or Contract
Documents, with a surety admitted in the jurisdiction of the Project and otherwise acceptable to the Owner, for the faithful
performance of such Contract and for the prompt payment of labor and material furnished in the prosecution thereof, or (2) pays to the
Owner the difference, not to exceed the amount of this Bond, between the amount specified in said bid and such larger amount for
which the Owner may in good faith contract with another party to perform the work covered by said bid, then this obligation shall be null
and void, otherwise to remain in full force and effect. The Surety hereby waives any notice of an agreement between the Owner and
Contractor to extend the time in which the Owner may accept the bid. Waiver of notice by the Surety shall not apply to any extension
exceeding sixty (60) days in the aggregate beyond the time for acceptance of bids specified in the bid documents, and the Owner and
Contractor shall obtain the Surety's consent for an extension beyond sixty (60) days.
If this Bond is issued in connection with a subcontractor's bid to a Contractor, the term Contractor in this Bond shall be deemed
to be Subcontractor and the term Owner shall be deemed to be Contractor.
When this Bond has been furnished to comply with a statutory or other legal requirement in the location of the Project, any provision
in this Bond conflicting with said statutory or legal requirement shall be deemed deleted herefrom and provisions conforming to such
statutory or other legal requirement shall be deemed incorporated herein. When so furnished, the intent is that this Bond shall be
construed as a statutory bond and not as a common law bond.
Signed and sealed this 22nd day of October, 2019.
_MtiA AA
(Witnesss)
(Witness) Michelle Wilson, Witness
TRUCK CENTERS INC.
(Principal (Seal)
(Title)
Traw+ele Ca t� And' Suretw� t�olpp�Ayi OfA aa�p
(Scxt ) (Seal)
(Title) Andrew P. Thome, Attorney- .,,
Init. AIA Document A330Tm— 2010. Copyright @1963, 1970 and 2010 by The American Institute of Architects. All rights reserved. WARNING: This AIA Document is
protected by U.S, Copyright Law and International Treaties, Unauthorized reproduction or distribution of this AIA Document, or any portion of it, may result in
severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law, Purchasers are permitted to reproduce ten (10) copies of this
document when completed. To report copyright violations of AIA Contract Documents, e-mail The American Institute of Architects' legal counsel, cYl�yf . t.tk aid gtg. 061110
State of Missouri
County of St. Louis
On 10/22/2019, before me, a Notary Public in and for said County and State, residing therein, duly
commissioned and sworn, personally appeared Andrew P. Thome known to me to be Attorney -in -Fact
of
TRAVELERS CASUALTY AND SURETY COMPANY OF AMERICA
the corporation described in and that executed the within and foregoing instrument, and known to me to
be the person who executed the said instrument in behalf of said corporation, and he duly acknowledged
to me that such corporation executed the same.
IN WITNESS WHEREOF, I have hereunto set my hand and affixed my official seal, the day and year
stated in this certificate above.
�
Michelle Wilson, Notary P-tTblic
V ICH LLE WILSON
NOTARY PUBLIC - NOTARY' SEAL
STATE COMMISSIONED �, "ERSON COUNTY
my COMMISSION F-XPIS JUN. 28, 2023
My Commission Expires:
9
Travelers Casualty and Surety Company of America
p/� Travelers Casualty and Surety Company
TRAVELEiIip .� , St. Paul Fire and Marine Insurance Company
POWER OF ATTORNEY
KNOW ALL MEN BY THESE PRESENTS: That Travelers Casualty and Surety Company of America, Travelers Casualty and Surety Company, and St.
Paul Fire and Marine Insurance Company are corporations duly organized under the laws of the State of Connecticut (herein collectively called the
"Companies"), and that the Companies do hereby make, constitute and appoint Andrew P. Thome, of Chesterfield, Missouri, their true and lawful
Attorney -in -Fact to sign, execute, seal and acknowledge any and all bonds, recognizances, conditional undertakings and other writings obligatory in
the nature thereof on behalf of the Companies in their business of guaranteeing the fidelity of persons, guaranteeing the performance of contracts
and executing or guaranteeing bonds and undertakings required or permitted in any actions or proceedings allowed by law.
IN WITNESS WHEREOF, the Companies have caused this instrument to be signed, and their corporate seals to be hereto affixed, this 3rd day of February,
2017.
State of Connecticut
City of Hartford ss.
Robert L. Raney, Sefifor Vice President
On this the 3rd day of February, 2017, before me personally appeared Robert L. Raney, who acknowledged himself to be the Senior Vice President of
Travelers Casualty and Surety Company of America, Travelers Casualty and Surety Company, and St. Paul Fire and Marine Insurance Company, and
that he, as such, being authorized so to do, executed the foregoing instrument for the purposes therein contained by signing on behalf of the corporations
by himself as a duly authorized officer.
In Witness Whereof, I hereunto set my hand and official seal.
My Commission expires the 30th day of June, 2021
Ma Am
O.Rx..e. Cig
ult, Notary Public
This Power of Attorney is granted under and by the authority of the following resolutions adopted by the Boards of Directors of Travelers Casualty and
Surety Company of America, Travelers Casualty and Surety Company, and St. Paul Fire and Marine Insurance Company, which resolutions are now in
full force and effect, reading as follows:
RESOLVED, that the Chairman, the President, any Vice Chairman, any Executive Vice President, any Senior Vice President, any Vice President, any
Second Vice President, the Treasurer, any Assistant Treasurer, the Corporate Secretary or any Assistant Secretary may appoint Attorneys -in -Fact and
Agents to act for and on behalf of the Company and may give such appointee such authority as his or her certificate of authority may prescribe to sign with
the Company's name and seal with the Company's seal bonds, recognizances, contracts of indemnity, and other writings obligatory in the nature of a
bond, recognizance, or conditional undertaking, and any of said officers or the Board of Directors at any time may remove any such appointee and revoke
the power given him or her; and it is
FURTHER RESOLVED, that the Chairman, the President, any Vice Chairman, any Executive Vice President, any Senior Vice President or any Vice
President may delegate all or any part of the foregoing authority to one or more officers or employees of this Company, provided that each such delegation
is in writing and a copy thereof is filed in the office of the Secretary; and it is
FURTHER RESOLVED, that any bond, recognizance, contract of indemnity, or writing obligatory in the nature of a bond, recognizance, or conditional
undertaking shall be valid and binding upon the Company when (a) signed by the President, any Vice Chairman, any Executive Vice President, any Senior
Vice President or any Vice President, any Second Vice President, the Treasurer, any Assistant Treasurer, the Corporate Secretary or any Assistant
Secretary and duly attested and sealed with the Company's seal by a Secretary or Assistant Secretary; or (b) duly executed (under seal, if required) by
one or more Attorneys -in -Fact and Agents pursuant to the power prescribed in his or her certificate or their certificates of authority or by one or more
Company officers pursuant to a written delegation of authority; and it is
FURTHER RESOLVED, that the signature of each of the following officers: President, any Executive Vice President, any Senior Vice President, any Vice
President, any Assistant Vice President, any Secretary, any Assistant Secretary, and the seal of the Company may be affixed by facsimile to any Power
of Attorney or to any certificate relating thereto appointing Resident Vice Presidents, Resident Assistant Secretaries or Attorneys -in -Fact for purposes only
of executing and attesting bonds and undertakings and other writings obligatory in the nature thereof, and any such Power of Attorney or certificate bearing
such facsimile signature or facsimile seal shall be valid and binding upon the Company and any such power so executed and certified by such facsimile
signature and facsimile seal shall be valid and binding on the Company in the future with respect to any bond or understanding to which it is attached.
I, Kevin E. Hughes, the undersigned, Assistant Secretary of Travelers Casualty and Surety Company of America, Travelers Casualty and Surety
Company, and St. Paul Fire and Marine Insurance Company, do hereby certify that the above and foregoing is a true and correct copy of the Power of
Attorney executed by said Companies, which remains in full force and effect.
Dated this 22nd day of October , 2019
Kevin E. Hus ��Mtantretary
To verify the authenticity of this Power ofAttorney, please call us at 1-800-421-3880.
Please refer to the above -named Attorney -in -Fact and the details of the bond to which the power is attached.
11 ROY
2280 Formosa Road Spec U: Compliance
Troy, IL 62294
(618)667-3454
(800)669-3454
AOR"IrO Nu The following components exceed minimum specifications:
300 East Ashland Street
Morton, IL 61550
(309)263-4240 1. Note #1: Page 9, "Silicone hoses" —Gates Blue Stripe hoses are rated at 300 degrees, which
(800)397-4292
exceeds the rated strength of silicone hoses.
2981 E Singer Avenue
Springfield, IL 62703
(217)525-1280 The following components deviate from minimum specifications:
(800)786-1280
SS I1.0Taylor Avenue Page 747 E1. Note #2: Pa 9+ "1+ + 200 Watt Block Heater" —1 000 Watts is the maximum available block heater
, Ta
St. Louis, MO63147 rating for the Cummins L9 diesel engine.
(314)381-3800
(800)325-8809
8016 Veterans Memorial Pkwy.
St. Peters, MO 63376 All other components meet minimum specifications...
(636)978-3870
(800)985-0360
`v>1S" VERNON
621 South 45th Street
Mt.. Vernon, IL 62864
Respectfully submitted,
(618) 244-2545
(800) 786-2545
EVANSVIL11 I',,,.
325 Rusher Creek,
,
Evansville, IN 47725�
(812)868-2700
Rich Stopczynski
(800)680-5910
Sales Executive
II:I'u:CAua.uw:
5002 Cundiff Court
Decatur, IL 62526
(217)877-0152
19336 North 1425 East Road
Hudson, IL 61748
(636)614-3470
(855) 287-1228
t011 _ Qtl1&.Yt':;:Il%SAIIl II is
Ell .ISSN:::k"II
2000 Cassopolis St..
Elkhart, IN 45614
574-262-3441
800-686-7364
II-t1f..0_...II...IR111.IIR:QS "SdRq..11!!!!,'la ....
SOU ril 111111E NUIIS
1011 W, Sample St,
South Bend, IN 46619
(574)289-4065
(800)589-7364
TRUCK CENTERS, INC. www1ruckentershic.corn
SPECIFICATIONS
CITY OF SOUTH BEND
Spec U — One (1) or More 2019 or Newer Single Axle Stainless Steel
BID NAME Multi -Use Dump Truck
FOR BIDS DUE October 22, 2019; 9:30 a.m.
Pursuant to notices given, the undersigned offers bid(s) to the City of South Bend in accordance
with the following attachment(s) which specify the class or item number or description, quantity,
unit, unit price.
SPEC U — ONE 1 OR MORE 2019 OR NEWER SINGLE AXLE STAINLESS STEEL
MULTI -USE DUMP TRUCK
It is the intent of these specifications to describe a vehicle or piece of equipment for the City of
South Bend. The unit shall be bid as a fully equipped complete unit as set out in the attached
specifications. tj)arti l or split kids will be accepted. Unit to be bid with and without trade-in
if applicable. Vendor to complete bid proposal contained in this bid specification and attach to
the submitted bid.
These are minimum specifications. Any variation from the specifications must be spelled out on
a separate deviation list in order for the bid to be valid. Any items not listed on the deviation
sheet will be assumed to be part of the unit.
Proprietary products or specific manufacturers may be referenced herein. Such references are
only made to demonstrate minimum scope, quality, and style of the equipment desired.
Equipment that is bid pursuant to these specifications shall be of equal quality and size, or
greater, to those referenced, and are subject to approval by the South Bend Board of Public
Works.
Vendor shall provide all information requested in specifications to qualify for bid. If information
on brochure submitted does not completely cover specifications requested, it shall be typed and
attached to brochure.
If an alternate is included within these specifications, please be advised that, alternate items
placed in the specifications are to determine the best configuration of the item within a budgeted
amount and may be included in the award criteria. If the Board elects to award one or more
alternate(s), the base bid price and the alternate bid price(s) will be totaled and compared for all
bidders offering the final configuration. Award will be made based on the lowest
responsible/responsive bid prices submitted for the base bid with selected altemate(s), if
applicable. Failure to submit a bid on an alternate may result in the entire bid being non-
responsive, depending on the final configuration of the product.
Payment will be processed once the unit is inspected and accepted as to meeting the
specifications by the Division of Central Services. This will include all manuals and warranty
documentation.
7
Bidder must state as accurately as possible an intended delivery date from the date of the
bid award. Due to the age of the City's existing fleet, it is imperative that the unit's be
delivered as quickly as possible. Stated delivery lead time may be included as an integral
part of our bid selection process. FOB Central Services. The unit and all related paperwork is
to be delivered to:
Central Services Division
1045 West Sample Street
South Bend, Indiana 46619
All Certificates of Origin/Title Work shall list the owner as:
The City of South Bend
1045 West Sample Street
South Bend, Indiana 46619
The Board will award the bid to the lowest responsible and responsive bidder. If the bid is not
awarded to the lowest bidder, the factors used to justify the awards will be stated in writing at the
request of any bidder.
The Board reserves the right to reject any and/or all bids or portions thereof and to waive any
irregularities or informalities.
SHALL BE
AS
TYPE
DESCRIPTION
SPECIFIED
(Circle One)
Chassis:
Conventional cab chassis with a cab to axle dimension of 96".
c S NO
Maximum wheelbase shall be set by manufacturer for a proper CA of
96", ground clearance minimum of 23" for underbody mounting.
Front Axle:
20,000 lb. capacity
DI-1./ NO
Rear Axle:
26,000 lb. capacity geared for 65 mph top speed.
a/N
Front
O/NO
Suspension:
20,000 lb. capacity, Heavy duty shock absorbers
Rear
30,000 Multileaf suspension with 45009 overload springs. Severe
Cyr�/ NO
Suspension: service suspension with torque rods.
TYPE DESCRIPTION
Engine,. Turbo -charged, inline six cylinder electronic controlled
diesel engine. Minimum horse power 270, at 800 ft. lbs. of
torque, air to air after cooler required, emergency shutdown
system for low oil, high coolant temperature.
Provisions for front mounted crankshaft P.T.O. including flange for ,
adapting to front mounted pump, fuel/water separator. Air cleaner to be
dry type, two stage with provision to pull intake air from under hood.
Air cleaner to include restriction indicator. A11 hoses to be silicone. o s ms
Severe service material and hose clamps to be constant tension type.
1200-watt engine block mit teincl a, g , Electronic Fan Clutch with
anual over ride switch. Engine and engine electronics warranty to be 5
year/150,000 miles.
SHALL BE
AS
SPECIFIED
(Circle One)
YES / NO
Transmission: Allison 3000 RDS, five speed electronic automatic, furnished with YES / NO
transmission temperature gauge, auxiliary oil filter and oil cooler.
Allison P-3 extended service coverage - 5-year unlimited miles shall be
included. Transynd transmission fluid included. Transmission control
module to be mounted inside cab.
Fuel Tank: 60-gallon minimum capacity, slim line tank mounted DillNO
on left side with minimum ground clearance of 23". Tank to be marked
"Diesel Fuel".
Electrical: 270-amp alternator, 12-volt starter, three (3) high -temp AGM batteries YES NO
with total 2775 CCA batteries. Lighting per D.O.T.
specifications. All lighting including headlights to be L.E.D. type lights.
Cab to have wiring and dash control for local installation of emergency
lights and accessories. All electrical connections to be water proof. 6
position switch panel with a dedicated power distribution center and
circuit breakers integral to trucks electrical system. Unit to have a 20-
amp battery feed and ground wire along with 15-amp ignition feed, all
three shall run to center of dash with approximately 2' of wire coiled up.
Jump start posts on frame rail near starter.
Frame: 120,000 PSI frame rating with single C channel rails YES NO
integral frame extension for mounting of snow plow. Frame to have a
minimum section modulus of 20 and RBM of 2,300,000 minimum.
Frame rating chart to be submitted with bid in lbs.
Cooling: Radiator to be severe duty largest capacity available. Radiator must be Q3,s/ NO
located to allow PTO shaft to pass under lower tank.
9
..A .. .. C CAI - = 5 /V e-
TYPE
DESCRIPTION
Tires Ten (10) hub piloted disc type wheels: 9 inch all positions
& Wheels: 315/80R22.5. Front Tire 20 ply radials Good Year G286 or equal.
Rear tires 12R22.5 16 ply Good Year G338 or equal, tubeless
radials.
Wheel Seals: Oil type; front and rear.
Steering: Dual hydraulic power.
Heater & Air Heavy duty factory installed air conditioning unit, heater and defroster,
Conditioning: in accordance with manufacturer's specifications.
Cab: Two -man severe -service cab if cab is steel it must be undercoated.
Interior cab height measured from floor to headliner must be a minimum
of 54" to allow our entire staff of drivers the proper work area to perform
their duties as expected. Bostrom air suspension high back driver's seat
with arm rest, passenger seat to be fixed. Tilt hood. Cab entrance assist
handles with rubber insert on each side of cab, 16" x 7" west coast and
convex mirrors heated and remotely operated with breakaway mirror
brackets, dual heated hood mounted convex mirrors on tripod brackets,
tinted windshield, intermittent windshield wipers and washer, dual sun
visors, orange seat belts for both seats, tilt and telescopic steering
column, and heavy-duty door hinges. Electric locks and windows.
AM/FM Bluetooth radio, both USB and 12-volt power plugs and cruise
control. Cab to include hour meter, needle calibrated oil temperature
gauge for transmission, water temperature, engine oil, volt meter, air
pressure, and fuel gauges included. In addition, dual air horns with snow
shields mounted under cab deck.
Exhaust: Vertical, must not interfere with CA dimension or mounting of
underbody. Vertical tail pipe guard and elbow included.
Brakes: Anti -lock brake system to include 18 cubic ft. compressor
and Wabco style air dryer with spin on desiccant cartridge air
dryer or equal, with heater. Dryer to be mounted with
clearance for underbody equipment. Brake pedal to be mounted on
firewall. Front brakes 16.5" x 6" with type 20 brake chamber, rear brakes
16.5"x 7" with type 30 brake chamber. Automatic slack adjusters, front
and rear. Rear axle chambers to be mounted with clearance for paver to
contact rear wheels. Dust shields on front and rear. Trailer air brakes
with glad hands plus 7 way round pin plug at rear of truck. Truck shall
also have electrical brake controller with Bargman 7-way flat pin plug.
All items mounted on rear of truck shall not interfere use of paver
10
SHALL BE
AS
SPECIFIED
(Circle One)
(DES / NO
E / NO
E / NO
E / NO
DI -Is / NO
SHALL BE
HIII' t°iy W otk ."Jones AS
TYPE DESCRIP1 ION SPECIFIED
(Circle One)
Parts List: Vendor shall supply a complete list of part numbers of all filters ES / NO
including hydraulic, belts, and hoses along with fluid types, quantities,
and major component serial numbers.
Safety: Truck and equipment to conform to all State and Federal (DE, / NO
Requirements, as well as O.S.H.A. and D.O.T. Back up
Alarm to be included.
Color: White Cab, Stainless Steel Dump Bed CyF / NO
Manuals: Complete set for chassis, engine, electrical, transmission, all add on YES NO
equipment. Can also be CD or DVD. Must include access to factory
website for trouble shooting and parts lookup. Must include 1-year
subscription for factory cab/chassis troubleshooting software.
Training: Vendor to include up to eight hours of training for trouble shooting and YFS NO
parts software and website for Central Services employees.
Specifications for 10'' Stainless SteelMulti-Use Dump Body
The intent of these specifications is to obtain a dumb body which meets the highest standards of the
industry with respect to quality and strength of materials, design and workmanship to the finished
product. The successful bidder shall be responsible for all warranty repairs.
Multi -Use The dump body should have a telescope hoist and an integral discharge YESNO
Heavy Duty system built into the floor capable of conveying or spreading a variety of
Dump Body: materials. The overall length shall be 10'. It shall have a capacity of 8 to
9 cubic yards without side boards. Body construction shall be seven
gauge 201 #4 stainless steel construction, minimum throughout (no
exceptions to grade and or type of steel will be accepted). Body shall
have boxed top rails, full depth rear corner posts and bolster. Body shall
have a maximum of a 2-inch side to floor radius (welded inserts are not
acceptable).
Remote grease extension manifold for all body grease points.
The bottom of the sides will have a 30-degree sloped rub rail that is 5"
wide. Continuous weld throughout. There shall be a 3" C channel
welded to the bottom longitudinal to form a base that will rest on truck
chassis.
Shovel Holders: Body shall include two spring mounted shovel holders
located on the driver's side front body bulkhead.
11
III ul' b� ' Ilri SHALL BE
AS
TYPE DESCRIPTION SPECIFIED
(Circle One)
Vibrator: There shall be a vibrator mounted to the underside of the
dump body. Vibrator should include mounting plate and safety chain.
Reflective Tape: There shall be a 2" reflective tape installed both bottom
sides and at the rear of the dump body. Tailgate shall have 2" reflective
tape installed around the perimeter facing to the rear.
Spread Apron shall be three piece with the center removable and shall
bolt on. Apron shall be hinged so that when pulling out of spreader it
will slide upwards. Spreader apron shall extend 12" and shall be
constructed of 7 gauge 201 #4stainless steel.
Tailgate: The tailgate shall be constructed of 7 gauge 201 #4 stainless steel with a'"YES )INO
boxed perimeter. The tailgate shall be double acting and have two 41111,..
vertical and one horizontal brace to form a six -panel design. The tailgate
shall have 1-1 /4" hardened pins.
The tailgate latches shall be 1/2" thick, with each latch being adjustable.
The tailgate shall be air release type. There shall be 2 air cylinders for the
tailgate release, and they shall be located one in each side of the body
rear post with an access panel.
The tailgate shall be air release type. There shall be 2 air cylinders for the
tailgate release, and they shall be located one in each side of the body rear
post with an access panel.
dNwov�,n
Floor: The floor shall be made of 201 7-gauge stainless steel. (�'YE'S
Note: In order to assure City's leaf box will fit, there shall not be over a
2" radius between sides and floor of dump body. It shall be bidder's
obligation to insure existing leaf boxes will fit quoted body.
Discharge Twin augers shall convey material to rear of body. The unit shall have a YES )NO
System: 1/4' 201 stainless steel replaceable trough with two V-shaped troughs for
the two augers.
There shall be two step -flighted augers, one RH helical and one LH
helical. Augers shall be 7" OD X 4" ID with 1/z" flighting on a Schedule
80 pipe. The flighting shall be %Z" thick, hard surfaced to minimum of
55 Rockwell hardness. Each auger shall be driven by a 24.9 Cl motor
with a 1-1/4" 14T splined shaft and ORB ports. The motors shall direct
couple to a 3.6:1 planetary gear box with a 2-1/2" output shaft. Gearbox
"float" mount shall be designed to compensate for any misalignment.
12
SHALL BE
niuflIed iri IIby W A Jorm ks AS
TYPE DESCRIPTION SPECIFIED
(Circle One)
The output shaft shall be coupled to the auger tube with a UHMW
bushing and a 7/8" G8 bolt. The 2" idler shaft shall couple to the auger
tube with a UHMW bushing and 7/8" bolt. The idler bearings shall be 2"
ID, four bolt flange type and greaseable.
The auger system shall not extend past the tailgate of the body so as to
allow for future additions of rear spreader and/or body attachments.
Integral rear body extensions or tail shelf is not acceptable.
Bottom Screens: There shall be Heavy Duty bottom grates constructed of
3/8" rod welded to form a 2.5" square mesh which is formed by a
combination of 1/4" x 1-1/2" flat steel and 2" angle iron with edge
supports reinforced with 1/4" x 1" flat bar. Bottom grates shall
incorporate a safety lock system to prevent easy access to the inside of
the body. Grates shall be installed over the dual auger discharge system.
The grates shall not interfere with the discharge of wet sand.
Cover Plate: There shall be a removable 1/4" AR400 steel auger floor cover provided to tlYES l"O
install over the augers to allow rebar and other chain abrasive materials��,ro,�.
to be hauled without damaging the augers. Cover shall be slide in type.
Spinner: The spinner assembly shall be manufactured from 201 stainless steel. YES NO
Spinner shall be chassis frame mounted. A vertical pipe shall be
mounted to the chassis frame and allows the spinner to swing under
and out of the way when spinner is not in use.
Entire spinner assembly shall be removable without the use of tools.
The spinner assembly shall have adjustable deflectors manufactured
from 3/16" stainless steel.
The spinner motor shall be high torque/low speed mounted directly to
the spinner disc with a cast hub.
The spinner disc shall be 20" in diameter and manufactured of
polyurethane.
Spinner motor shall be installed with seal savers.
This arm shall have two positions; one under the conveyor to receive
material, the other position will be stowed under the chassis. The mount
shall bolt onto the truck so it can be removed for the truck to back into
the City's paver.
13
SHALL BE
i led in bION AS
TYPE V
(Circle One)
Cab Shield: Cab shield Shall be 7 Ga 201 #4 stainless high strength steel w/typicalYI) NO
yield strength of 50,000 PSI. Cab shield shall extend 24" and be full �a�� pow 10
width and shall be attached by welding. Cab shield shall have six (6)
laser cut oval holes pre punched at the factory for emergency oval strobes
facing forward. Cab shield shall have six (6) laser cut oval holes pre
punched at the factory for emergency oval strobes facing rearward. Cab
shield shall also have two (one per side) laser cut oval holes mounted on
the side of the cab shield facing sideways.
Telescopic The hoist shall be of telescopic design and have a Trunnion mounting. YES , NO
Hoist: ',
The hoist shall have a lifting capacity of 35 tons and shall be equal to a
Mailhot cs130-5.5 3 stage double acting cylinder.
The hoist shall be designed to operate up to 2,500 PSI and shall be self -
bleeding.
The hoist shall have a'/a" wall construction with bronze glands and
pistons to assure a smooth and durable bearing surface.
The glands shall each be a continuous cast bearing, SAE-660 bronze with
a tensile strength of 44,000 PSI.
The cylinder head and piston shall be of a "ductile" continuously cast
iron, with a tensile strength of 60,000 PSI.
Each cylinder shall be internally sealed.
The inside seals shall be of a u-cup design made of nitrate packing.
The cylinder shall have a Melonized/Q.P. Running surface.
The Melonized surfaces shall have a predominance of single phase
epsilon nitride. The nitride shall cover the entire cylinder surface.
This shall give the cylinder superior wear and corrosion resistance and
shall have superior wear and fatigue properties.
The cylinder rod shall be c1045/c1050 steel with a tensile strength of
80,000 to 1,000,000 pounds.
The cylinder tubing shall be D.O.M. Tubing, drawn over a mandrel, and
shall have tensile strength of 70,000 pounds. The tube shall have a
surface harness of 80 Rockwell `B".
14
SHALL BE
F° iii III IIIehr'i IlrDy W A, : iir es AS
TYPE DESCRIPTION SPECIFIED
(Circle One)
The cylinder shall dismantle easily and overlap between stages for
greater stability.
The trunnion collar shall be oscillation
Each rod or pin eye shall have a zert.
Ladder: A ladder will be provided for access to dump body. YES N0
�IVVIWI� Whigb
D-Rings: Bed shall have 3 D-Rings on each side of bed to mount leaf box. YES 0
Tarp Rods: There shall be 2" wide stainless grip strut walk rails located on the sides DES 110
of the body. Tarp rods shall be installed in approved location and place "%�����,� .."0000
as what the City currently has on their fleet trucks.
Tarp: Tarp system should be of the same system that is presently used by the YES NO
City now and shall be installed in a like manor. System shall be a Pull
Tarp system with parts that interchange with City's existing traps.
Mountiu of Dum Bod
Shall have a minimum of three (3) brackets (each side) - 2 "x 4" flat iron minimum, at least one at rear,
one in center, one at front. Shall be welded at rear and bolted with three (3) 5/8" bolts per bracket
(minimum). Hoist cylinder shall be hooked to central hydraulics with 3/4" high pressure hose (two wire
minimum). Floor of body to be approximately 54" off ground +/- 2". All welding to be done at factory
on box. Other welding to be certified. Two rear hooks shall be supplied and bolted to rear of frame.
Note that units are used in the City's paving program and that the completed units must be able to fit
with the City's existing paver. It shall be the equipment providers responsibility to insure the unit will
work and dump into City's paver.
Electrical: All lighting shall be LED. YES NO
All add on Body Company Wiring shall be run from a power distribution
panel. The panel shall consist of a powder coated steel panel that will
serve as a mounting base and a clear cover retained by thumb screws.
Mounted to the base will be a minimum 12 position fuse block accepting
ATO type blade fuses, a 12-position ground buss, a continuous duty 100-
amp solenoid to charge the fuse block and a 24-position terminal strip to
secure wiring with ring terminals.
The panel will feature raised construction to allow mounting of
15
SHALL BE
�I ii 11111 i iir-i by W A Jar es AS
TYPE DESCRIPTION SPECIFIEI
(Circle One)
additional electronic equipment under the clear cover. The cover will
include a side and bottom cable pass through access port and row of
attachment points to secure wiring or strain reliefs for cables exiting the
power distribution panel.
The preferred mounting location will be on the back of cab wall in a
location that offers ease of access for maintenance.
Warning lights, strobes, and plow lights each to be run off OEM
switches.
Lights to be installed in rear corner posts of body shall be four sets of 6"
oval LED lights with the following configuration per side. Top: l': LED
Amber Strobe 2nd: & 3rd LED Stop/ tail turn 4d' shall be an LED reverse.
Minimum 12" excess wire on rear lights for ease of changing lights.
The body cab shield shall include Six (6) LED oval strobe lights
mounted in the front of cab shield facing forward and six (6) LED oval
strobe lights facing rearward built into the cab shield. Configuration of
the forward -facing lights shall be 1st LED amber 2nd LED clear 3rd LED
amber 4t' LED amber 51 LED clear 6' LED amber.
Configuration of the rear facing lights shall be 1 st LED amber 2nd LED
clear 3rd LED amber 4 h LED amber 5 h LED clear 6t' LED amber.
One pair of LED amber oval strobe lights mounted on each side of front
corner of cab shield — lights shall be built into the cab shield facing
sideways. Cab shield light wires shall be run in solid steel tube for
protection on top of cab shield.
One pair of LED amber oval strobe lights mounted on each side of body
top rub rail. Lights shall be built into the factory body rub rail.
Also included will be a pair of Truck Lite LED Model #80880 or equal
heated plow lights mounted to stainless steel brackets on hood. Plow
lights to LED and integral to OEM headlights.
Spreader light: One LED flood light mounted on the rear of the dump
body. Location to be approved by Central Services.
There shall be one LED mounted spot light for the underbody mounted
on the passenger side. Location to be approved by Central Services.
16
III °° iIII eby W A J'o�rm ies
TYPE DESCRIPTION
Rear Pintle There shall be a Pintle hitch installed on the rear of the unit at the time of
Hitch: delivery.
Hitch shall incorporate a 3/4" welded steel plate located between the
chassis frame rails.
There shall be a 25-ton rear pintle hitch Wallace Forge 2044101 installed
at a height of 25 %2" from ground and center of truck.
Hitch shall have the following 6,000 lbs. maximum vertical load, 50,000
lbs. maximum gross trailer load. Drawbar eye dimensions: 2" to 3" ID 1
1/4" to 1 5/8" diameter section. There shall also be a 2nd pintle hitch
installed for off set of pulling leaf vac machines. This pintle shall be
installed in manor and measurements specified by South Bend Central
Services.
SHALL BE
AS
SPECIFIED
(Circle One)
Q' 1 S 0
Body builder shall provide Trailer air brakes hooked to the chassis air
tractor system with glad hands plus 7 way round pin plug at rear of truck.
Truck shall also have electrical brake controller with Bargman 7-way flat
pin plug.
Note: Vendor will check with Central Services on exact location of hitch S 6'),No
and exact location of all rear mounted lights. All accessories shall be
mounted in such a way that they do not interfere with using the
truck for paving. It is the responsibility of the successful bidder to
make sure truck will back into the City's paver.
Minimum Specifications For A Close Center Load Sensin Hydraulic System
Hydraulic Hydraulic Pump The hydraulic pump will be a cast iron, variable displacement YES /O
Pump: piston pump with load sensing control. Pump to feature internal bleed downu
compensator and separate adjustments for stand by and main pressure. Pump
shall be Sauer Danfoss FRL series pump or prior approved equal. Pump
capacity 90CC. A 1 " steel ball valve shall be at the outlet of the pump.
Pump shall have a shutdown circuit. Circuit shall be energized by a
tank mounted float to shut off pump flow in the event of a low oil
condition.
Shutdown system shall have a cab mounted system override switch.
Mounting: The hydraulic pump shall be mounted with shaft centerline parallel to the YES � 0
crankshaft centerline and at a level to create not more than a three-degree'"mom
angle on the drive line. The pump mounting shall be incorporated with a
bracket fabricated to mount in the extended rails from the pump.
17
i II! led in l.')y W A,Iaries
TYPE DESCRIPTION
Driveline: The hydraulic pump shall be driven directly off the engine crankshaft via
a splined driveline to allow for movement. The driveline shall include
grease fittings on both u-joints. Spicer model 1350 series or equal.
Reservoir: The hydraulic reservoir will have a minimum capacity of 35 gallons and
be mounted on the chassis frame between the body and the chassis. The
hydraulic tank shall be a minimum of 7 gauge and be powder coated. The
reservoir will include a sight/temp gauge, a suction strainer and a
magnetic drain plug. The reservoir top will include a 90-gpm-cartridge
style return filter with 10-micron element and 25 psi bypass. One spare
element to be furnished with the truck at the time of delivery.
Reservoir shall have a float assembly wired to the console to notify the
operator of a low oil condition.
Initial fill of AW-32 oil shall include antifoam and anti -wear package.
The tank shall require no more than 13 inches in width and shall not
prevent the body from sitting a maximum of 16" from the back of the
chassis cab. If truck has CNG engine package than tank will need to be
frame rail mounted.
There shall be a clean out hole 7" x 6" located in bottom of hydraulic tank.
Hydraulic tank shall have shut off to allow service without draining
hydraulic tank.
Hydraulic Valve: The hydraulic valve will be a cast iron, sectional type
spool valve. Valve will feature individual section and flow
compensation for each section. The valve will be rated for a nominal
flow of 30 gpm. The load sensing shuttle network will be accessible
without valve disassembly.
Sections will be provided for following:
Dump hoist: double acting with down relief
Scraper: Dual Axis up- down right —left
Front plow double acting with reliefs
Front plow angle with reliefs.
Valve Enclosure: The hydraulic valve will be mounted in a sealed
enclosure. The enclosure will feature an automotive type bulb seal and a
bolt on lid. Enclosure will be constructed of 304 stainless steel and be 7
gauge in thickness. The hydraulic valve will mount inside and be
plumbed to the enclosure with steel tubing. Connections on the front of
18
SHALL BE
AS
(Circle One)
V S ))NO
'AYES NO
TYPE DESCRIPTION
the enclosure will be JIC bulkhead type. A drain will be provided in the
enclosure bottom and equipped with a 5/8 nylon extension.
Hydraulic Stainless Hydraulic lines: There shall be stainless steel tubing used to
Lines & run the hydraulic lines from the rear of the bed to the front. Tubing shall
Plumbing: be SAE stainless with flared ends and hydraulic hose used for short
jumpers. Stainless lines shall be both to the rear spreader and to the front
for the plow operation.
The hydraulic system will be plumbed to SAE standards with no black or
iron pipe connections or components. National Pipe Thread connections
are allowed at the reservoir provided they are dry seal type and sealed
with liquid sealant. Pressure lines to be SAE100-R16, return lines to be
SAE 100-R1, Suction line to be SAE 100-R4. Front plow angle, auger
and spinner couplers to be stainless steel with dust covers. Coupler
halves to be reversed for ease of hook up. Installation will include a full
flow -32 ball valve in the suction line and a -16 high pressure steel ball
valve in the pressure line to shut off oil flow to the valves.
Stainless Hydraulic Couplers: There shall be stainless hydraulic
couplers used regarding plow underbody dump bed etc. Couplers to be
poppet style and all stainless. Couplers to be Safeway model 10 and
include dust caps and plugs.
Electronic The spreader control will utilize PWM technology to control the variable
Spreader feed and spread widths. The feed rate knob will accommodate 9
Control: different settings while the spread width knob will also accommodate 9
settings. The control head will have a power switch with an indicator
lamp to provide status on the operation of the controller. Unit to be
mounted for safe use by driver.
Controller shall be Storm Guard Freedom 2 controller.
Spreader control shall have ability to be touch screen with USB data
download.
Screw on cap and plug set for motor sensor connection.
Shall include detailed operator's manual, calibration manual, wiring
diagrams.
19
SHALL BE
AS
SPECIFIED
(Circle One)
(YES )NO
ul YES �NO
1%,vn...... ..
Filled by laqes
,TYPE DESCRIPTION
Spreader Control Harness System:
Spreader control and the hydraulic valve shall be connected via TPE
harness system.
System will include a diagnostic board with direct reading LED circuit
indication.
Wiring system will exclude any infusion of direct application of 1000
PSI pressure wash spray.
Connectors shall withstand 500 hours of 35C salt spray.
The controller will also offer a combination "blast"- "unload" switch.
This switch will allow the controller to produce a Blast function with
programmable duration and a maintained unloads position for unloading
the spreader or offering continuous operation during cleaning. The
controller will allow the attachment of speed pickup to start and stop the
material spreading with vehicle motion.
Wiring harness for the spreader control shall be full factory assembled
with waterproof ends and covered in expanded nylon abrasion sleeve. A
separate fuse shall be included into the controller to protect it in the event
of a short circuit deploying the inline fuse included in the installation.
Controller shall be mounted in the cab with all hydraulic lines and valves
outside of the operator's compartment. All wiring that leaves the cab,
such as valve supply and speed pickup, shall be secured with rubber
covered steel clamps and include a watertight strain relief at the cab exit.
Control The control valve shall be US manufactured. The valve is to be Greisen
Valve: Model V40N20 or equal load sensing stackable spool type with O-ring
ports mounted between the frame rails outside the vehicle cab. Hoist
section and tool circuitry section to be V40 and all other sections to be
V20. Valve sections to be arranged as follows:
Hydraulic Valve: The hydraulic valve will be a cast iron, sectional type spool
valve. Valve will feature individual section and flow compensation for each
section. The valve will be rated for a nominal flow of 30 gpm. The load sensing
shuttle network will be accessible without valve disassembly. Sections will be
provided for following:
20
SHALL BE
AS
SPECIFIED
(Circle One)
���x�ra�!"rvmianaa9rq'�k�
YES NO
TYPE
Filled iii IIby W A,Jai � e s
DESCRIPTION
Hoist, double acting cylinder with down side work, port relief set as
500 psi.
2. Mid-inlet/transition section.
3. Underbody plow lift, double acting cylinder with down side work port
relief set at 500 psi.
4. Underbody plow angle, double acting cylinder with
auxiliary cross port relief valve to protect cylinder.
5. Spinner attachment, dual compensated control.
6. Plow lift, double acting cylinder with down side work port relief set at
500 psi.
7. Valve Controls and Enclosure: The valve assembly shall be mounted
in weather -tight enclosure. The valve enclosure shall be fabricated of
12-gauge steel. Enclosure shall be designed to not allow humidity to be
trapped inside. Valve to be mounted with all ports coming out of the
bottom and holes allowing for hose adaptor fitting. Enclosure will allow
for bulkhead style cable to enter the front. Valve will be boxed in with
cover and not the base. The cover shall be held to the enclosure by four
heavy rubber latches. All plumbing shall be external, directly out the
bottom of the valve enclosure.
Specifications for Mounting Underbody Blade Assemblies
Scraper shall be extra heavy duty for year-round use. It must be capable
of plowing snow at various speeds and withstand snow pack and ice in
the winter season. It must be capable of performing gravel road and
shoulder maintenance throughout the year. The scraper shall be
reversible to 45 degrees left and right with infinite plowing positions
available.
Moldboard: 1" thick x 20" high x 10' long moldboard. Integral pressed
in lower offset where the cutting -edge bolts to the moldboard. And shall
include a 5/8" x 8" cutting edge with standard highway punch.
Underbody Circle: 1" solid one-piece circle with 45-degree rotation with
infinite plowing positions; no notches.
Reinforced with %" x 3"and 1" x 3" bar stock
Circle shall not exceed 52" diameter
Circle cut outs for angle cylinder pin bosses must be as small as possible
5" ID x 6.5" OD x 1" hardened center bushing
21
SHALL BE
AS
SPECIFIED
(Circle One)
YES NO
0
TYPE
SHALL BE
F iii flI e d lii n by W A ,R aies AS
DESCRIPTION SPECIFIED
Center Pin: Heavy duty, 5" diameter, hardened center pin, zinc coated.
Greaseable with 3 port grease journal and 5/16" wide x 3/16" deep
grease groove around pin.
Center pin is piloted into Hanger board
Circle Clamps: 20.5" long x 7" deep x 1" thick
Shaped to follow the contour of the circle
3/8" UHMW wear pads
Entire clamps must remain fully on the circle throughout the entire
rotation of the scraper
Reversing Cylinders and Hardware: Two (2) 4" x 12" double acting
cylinders %" #8 SAE ports
2" diameter Socatri 1000-cylinder rods
Poly -Pack seals and cast steel heads
3" OD x 2" ID cylinder pivot mounts
2" diameter hardened pivot pins, zinc coated with spiraled grease groove
around full pin
30 gpm pressure adjustable cross over relief valve
Hanger board shall be designed and engineered for optimum strength and
durability
V2" formed plate upper with 5" diameter center pin pilot hole
'/2" formed lower plate for 1" thickness full width of hanger -board
3.25" x .344" mechanical tube outer hinge tubes
3/4" thick trunnion arms
Outer trunnion arms are bolted to hanger -board
22
(Circle One)
TYPE
SHALL BE
� I�� ASII��, � ,� �U���wa� iii ���'�°��
DESCRIPTION SPECIFIED
Hinge: 2 1/z" diameter x 96" long solid shaft
Four (4) grease points
Three (3) hinges that are bolted to the moldboard
All hinges are 3 1/4" OD with .344" wall thickness mechanical tube
Outer hinges are 6" long and have %2" wrap around gussets
Center hinge is 10 3/4" with two 1/2" wrap around gussets
Center hinge thrust plates to prevent side shifting of moldboard and
hinge tube contact
Actuating Cylinders: Two (2) 3-1/2" x 10" double acting cylinders with
2" Socatri 1000 piston rods Poly Pack seals and cast heads
1/2" hydraulic hoses and pipes with poly clamps externally mounted for
easy access
Shocks and Housings: Scraper is cushioned by two (2) heavy duty
spring housings
Two (2) %2" thick flange retaining plates held by four (4) 5/8" bolts with
prevailing lock nuts
Housings to be slotted to relieve contaminants
Greaseable trunnion mount bushings are 2 3/4" OD x .344" wall
mechanical tube
Trunnion mount pins are 2" solid rod, bolt in removable design
Mounting Plates: 3/4" thick plate steel construction
Attached to truck using 3/4" grade 8 bolts, SAE washers, and prevailing
lock nuts
All hardware and fasteners are electronically plated for corrosion
resistance
Paint: Shot -blasted, washed, and powder coat painted TGIC polyester
black
23
(Circle One)
SHALL BE
TYPE DESCRIPTION IG SPECIFIED
(Circle One)
All parts are powder coated prior to assembly of scraper
Grease line kit: A remote grease line manifold kit that allows grease to be
applied at centralized locations outside of the chassis frame.
Grease hoses shall be SAE107 Hytron hose rated at 3000 psi maximum
work pressure.
Grease line kit will incorporate all 19 grease points on the scraper.
Drawings and pictures shall be included in the bid package showing
the grease line kit (failure to provide drawings and pictures will
disqualify your bid).
Moldboard shall have replaceable blade and end bits
Mounting Brackets: The hanger brackets shall be 1" x 4" solid bar stock.
Underbody shall be powder coated paint black and orange.
All hardware and fasteners shall be electronically plated and corrosion
resistant.
Manufacturer shall provide caution labels, decals and any warnings
deemed necessary.
Specifications for Snow Plow Quick Hitch Large
General: Snow plow quick hitch shall be heavy duty type to be used for street
and/or highway snow plowing by heavy duty trucks. Hitch shall be
designed to permit adequate lift and full radius swing of hydraulic
controlled power reversing snow plows.
Construction: Truck Half. Husting Type Snowplow hitch shall be an automatic snap
coupling type. 34" wide equipped with 3" diameter by 10" nitrated double
acting stroke hydraulic lift cylinder. Automatic locking shall be
accomplished by dual cam actuated spring -loaded tapered rollers. A lever
shall be provided for retraction of locking rollers.
Hitch shall be tapered on the truck side as to allow better clearance for
chassis hood clearance. There shall also be a rubber stop installed on
truck side of the hitch as to prevent the chassis hood from contacting the
plow hitch.
24
SHALL BE
TYPE
DESCRIPTION SPECIFIED
(Circle One)
Husting hitch shall be provided with a set of tapered rollers in lieu of
the standard cams.
Specifications for Mounting g of Quick hitches
Mounting Truck frame will be extended forward of grill. Bidder will furnish
Material: minimum 2 "x 4" x 8" x 48" long angle across front bumper.
Bottom braces shall be installed from hitch to frame with 3 3/4 bolts,
grade 8. Material 1" x 4" flat iron minimum. Top braces 2"x 4"
flat iron minimum and run to frame. Hose to hook up hitch and
cylinder shall be 3/8" and furnished by bidder. Hooked to
hydraulics part with 1,000 lbs. PSI port relief minimum. Bumper
angle is to be mounted to frame with four (4) pieces of 4" x 8"
minimum angle to frame. Hood to have cable stop before resting on
plow hitch. Plow lights to be included.
Alternate #1: Front Snow Plow
Plow shall be equal to Monroe MP-4IR-ISCT
Moldboard shall be constructed of 10-gauge A569 steel with a tensile
strength of 55,000#-70,000#.
Moldboard is to be rolled formed and 100% continuously welded.
Overall length of plow moldboard shall be 11'.
Height of moldboard is to be minimum of 41" with an 8" cutting edge.
Moldboard shall have minimum six vertical support ribs which are to be
flame cut, 1/2" A36 steel, with a tensile strength of 58,000# - 80,000#,
equally spaced across the width of the moldboard.
The ribs are to taper from a minimum of 3.5" at the bottom moldboard
angle to 2" at the top moldboard angle
A 1/z" x 4" x 6" plate is to be welded to the four ribs where the push
frame attaches to the moldboard to provide a 1" bearing surface for pins.
The non -spring horizontal support angles are to be 3" x 3" x 1/4" A36
steel angles.
The two spring support angles are to be 3" x 3" x %z" A36 steel angles.
25
TYPE
SHALL BE
III i � IG li Sri °� , J i����i�� � � � as
DESCRIPTION SPECIFIED
Top moldboard angle is to be 2" x 3" x 3/8" A36 steel.
Bottom moldboard angle is to be 4" x 4" x 3/4" A36 steel.
Bottom moldboard angle is to have 11/16" holes punched to match hole
pattern of cutting edge.
There shall be %2" thick gussets welded on each end of the inside of the
angle and midway between all punched holes.
Spring support/attachment plates are 3/4" A36 steel with 3 holes for
attaching compression spring arms at moldboard pitch settings of either
20, 10 or 5 degrees.
Cutting edge shall be 5/8" x 8" blade made from 1080 steel with a
Rockwell `B" hardness of 93-100. The blade shall have standard
AASHO hole spacing and is to be top punched 1-1/2" from the top edge
to the center of the bolt.
Cutting edge is to be attached with 5/8" x 2-1/2" grade 8 plow bolts
Plow semi -circle is to be fabricated from 3-1/2" x 3-1/2" x'/z" A36 hot
rolled angle.
Two 1" x 3" x 5" positive stops are to be welded to semi -circle and set to
allow moldboard to swing 35 degrees in either direction.
The push frame is to be 4" x 4" x 3/8" A36 wall square tubing 84" in
length. This tubing is to have eight 4" x 4-1/2" x'/z" A36 attaching ears,
which are to form a four -point pivot to affix the moldboard onto the push
frame attached with four 1-1/4" stress proof plated pins.
There are to be two jack support channels 8" x 18" A36 steel which have
six 3/4" holes for mounting various optional shoe assemblies.
There shall be two compression trip assemblies consisting of three
pieces: %" x 3-1/2" A36 steel mechanical slide, with a 5-5/16" O.D. x
23-1/4" free height x 21/32" bar diameter spring.
The spring is to be made from AISI 5160H steel with a tensile strength of
112,000 - 140,000 PSI, rated at 195#/inch of compression.
The reversing cylinders shall have a 3" bore x 10" stroke, 2" diameter
chrome plated rod. Nitrated cylinders are also acceptable.
26
(Circle One)
TYPE
SHALL BE
III flV leiii�m�, Ilby IVV A ak I AS
DESCRIPTION SPECIFIED
The hydraulic hoses are to be abrasion resistant, extremely flexible and
work in a temperature range of -50 to 250 degrees F. The 1/z" I.D. hose is
rated at 3,000 PSI working pressure and 12,000 PSI burst pressure.
Included with the hydraulic system is a DXV double relief cushion valve
set at 1,800 PSI.
The A -frame is to be constructed of 2-1/2" x 4" x 13.8# ship and car
channel with a 1" x 5" oscillating plate.
The oscillating plate is to have a hole to accept a minimum 1-1/4" bolt.
1.5" Henderson
All hardware and fasteners shall be electronically plated and corrosion
resistant.
All fasteners shall be grade 8, both cap -screw and nut.
All nuts shall be locking hex nuts, grade 8.
All hydraulic hoses shall meet the following requirements. The hoses
shall have a .515" I.D. x .820" O.D., shall have a maximum burst
pressure of 3,000 PSI, a minimum burst pressure of 12,000 PSI. The
inner tube of the hose shall be seamless oil resistant copolyester and
reinforced on the outside with one braid of high tensile steel wire. The
cover on the outside of the hoses shall be weather/abrasion resistant
black nylon braided with one blue plate of cover yarn for identification.
Hitch: plow half of hitch should be able to fit 34" husting type
Shoes / wheels Plow shall be delivered with two snow wheels model dl
750 with adjustable jacks;
Plow should have integral snow deflector built in
Plow should have rubber snow deflector installed upon delivery.
Plow should have left and right-hand replaceable curb guards
Plow shall have left and right discharge ears (commonly called mouse
ears with rubber deflectors).
Painting process of unit: In view of environmental safety, environmental
27
(Circle One)
SHALL BE
III
�h� i IIh"°�°� in �� AS
TYPE DESCRIPTION SPECIFIED
(Circle One)
sensitivity and a corrosion resistant finished product, the paint process
for all steel components shall be powder coat paint, incorporating the
encasement type process.
Alternate #2: CNG Fuel System
320 horsepower, with 1,000 ft. lbs. torque minimum Cummins L9N
natural gas engine. Emergency shutdown system for low oil pressure,
high water temperature. Air filter shall be replaceable paper type with a
restriction gauge. Oil filter to be a combination full flow/bypass type.
Fuel system to include a low-pressure coalescing fuel filter. 1,000-watt
block heater, with thermostat, to be included. Engine warranty to be a
minimum of 5 years/200,000 miles/10,000 hours. Engine
troubleshooting manuals/software to be included. Fuel tank capacity 75
DGE.
Methane detection system with one (1) sensor in cab, and one (1) sensor'`
in engine compartment detector to be wired to one battery and isolated
from the other two batteries.
Alternate #3: Optional Electric Controls: There shall be an option shown on the bid 4 YESIO
for electric hydraulic controls in lieu of the cable mounted controls the �
optional item shall be in accordance with the following specifications: l f ' S e l e cte d
Hoist, Scraper and Plow Controls: The hoist and scraper functions
will be controlled from the cab via four (2) separate proportional joystick
assemblies. The hoist control will include a neutral lock. Controls to be
mounted in a floor mounted console that will include an arm rest and
provision for mounting the spreader control to. Control installation to
include indicator lights for body up, low oil. Control console to be a
Storm Guard Freedom series.
The following series shall be followed as to functions of the electric
joystick controls: scraper shall be dual axis with the exception of the
dump body:
1 st stick: Body up down;
2nd stick: Scraper dual axis up down right left swing;
3rd stick shall be dual axis plow up down and right left swing
The control console shall incorporate both the below spreader control
and a light switch pack to operate all emergency light functions,
Switches shall be backlit:
28
SHALL BE
AS
TYPE DESCRIPTION SPECIFIED
(Circle One)
SPREADER CONTROL: The spreader control will be provided by
programmable microprocessor. The controller will include separate,
rotary knobs for adjusting the spinner and feeder motors, on screen
indication of rate settings, open loop automatic or manual operation,
separate push buttons for pause and blast and open loop liquid capability..
The spreader control will include a self -diagnostic capability that will
display on screen text messages if a fault or loss of accuracy is detected.
A USB 2.0 port will be included for data downloading and the
installation of software updates. Spreader Control to be a Storm Guard
Freedom series model 2.1.
n,
Pre- '10Y ES �10
Construction: Vendor will have pre construction meeting at Central Services.
WE
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
Chassis Specifications
Prepared for
City of South Bend IN
Prepared by
Truck Centers, Inc.
Rich Stopczynski
October 22, 2019
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
rstopczynski@truckcentersinc.com
2021 Freightliner Model 114SD Single Axle Chassis
for either Diesel or CNG Snowplow Applications
Quote No. SB1— Page 1 of 16
Single Axle Diesel Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
S P E C IF I CAT I ON L IS T
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
rstopczynski@truckcentersinc.com
Data Code
Description
ISM
........ .
001-177
114SD CONVENTIONAL CHASSIS
004-221
2021 MODEL YEAR SPECIFIED
002-004
SET BACK AXLE - TRUCK
019-001
TRAILER TOWING PROVISION AT END OF
FRAME FOR TRUCK
003-001
LH PRIMARY STEERING LOCATION
AA1-003
TRUCK/TRAILER CONFIGURATION
AA6-002
DOMICILED, USA (EXCLUDING CALIFORNIA AND
CARB OPT -IN STATES)
A85-010
UTILITY/REPAIR/MAINTENANCE SERVICE
A84-1GM
GOVERNMENT BUSINESS SEGMENT
AA4-010
DIRT/SAND/ROCK COMMODITY
AA5-002
TERRAIN/DUTY: 100% (ALL) OF THE TIME, IN
TRANSIT, IS SPENT ON PAVED ROADS
AB1-008
MAXIMUM 8% EXPECTED GRADE
A135-002
ROUGH, MAINTAINED, CONCRETE OR ASPHALT
PAVEMENT - MOST SEVERE IN -TRANSIT
(BETWEEN SITES) ROAD SURFACE
995-1A0
FREIGHTLINER SD VOCATIONAL WARRANTY
A66-99D
EXPECTED FRONT AXLE LOAD: 20,000lbs
A68-99D
EXPECTED REAR AXLE LOAD: 26,000 Ibs
A63-99D
GROSS VEHICLE WEIGHT CAPACITY: 46,000 Ibs
AA3-073
DUMP BODY, FRONT HITCH AND BELLY PLOW
WITH HIGH GROUND CLEARANCE
A88-99D
EXPECTED TRUCK BODY LENGTH: 10.0 ft
AE2-99D
EXPECTED TRUCK BODY WIDTH: 96.0 in
A89-99D
EXPECTED CAB TO BODY CLEARANCE: 15.0 in
AF3-2137
WA JONES TRUCK BODIES AND EQUIPMENT
Quote No. SB102219C — pii�+� ������ o� ��� Page 2 of 16
Single Axle Diesel Plow Truck ��
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone:574-235-9251
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone:574-289-4065
rstopczynski@truckcentersinc.com
Data Code
Description
�, , � ,
I�/�,i�1„„�.
AA2-005
EQUIPMENT TRAILER
AH6-001
SINGLE (1) TRAILER
i i10 , , 7/; i /, o
25
12
101-22N
CUMMINS L9 270 HP @ 2000 RPM; 2200 GOV
RPM, 800 LB/FT TORQUE @ 1300 RPM
ggg
,,.,.,...,,.i .........
79A-065
65 MPH ROAD SPEED LIMIT
7913-000
CRUISE CONTROL SPEED LIMIT SAME AS ROAD
SPEED LIMIT
99C-017
2016-2019 ONBOARD DIAGNOSTICS/2010
EPA/CARB/FINAL GHG17 CONFIGURATION
13E-001
STANDARD OIL PAN
105-001
ENGINE MOUNTED OIL CHECK AND FILL
014-108
SIDE OF HOOD AIR INTAKE WITH FIREWALL
MOUNTED DONALDSON AIR CLEANER WITH
SAFETY ELEMENT AND INSIDE/OUTSIDE AIR
WITH SNOW DOOR
124-1 DO
LN 12V 270 AMP 4967PGH PAD MOUNT
ALTERNATOR WITH REMOTE BATTERY VOLT
SENSE
292-222
(3) DTNA GENUINE, HIGH TEMP AGM STARTING
AND CYCLING, MIN 2775CCA, 570RC,
THREADED STUD BATTERIES
290-1 CD
BATTERY BOX WITH ALUMINUM COVER
MOUNTED SHORT SIDE TO RAIL
281-001
STANDARD BATTERY JUMPERS
282-042
LH BATTERY BOX MOUNTED AS FAR AFT AS
POSSIBLE, NO GREATER THAN 60 INCHES
BACK OF CAB
291-017
WIRE GROUND RETURN FOR BATTERY CABLES
WITH ADDITIONAL FRAME GROUND RETURN
289-001
NON -POLISHED BATTERY BOX COVER
87P-001
CAB AUXILIARY POWER CABLE
293-060
POSITIVE LOAD DISCONNECT WITH CAB
MOUNTED CONTROL SWITCH WITH LOCKING
PROVISION MOUNTED OUTBOARD DRIVER
SEAT
295-003
POSITIVE AND NEGATIVE POSTS FOR
JUMPSTART CHASSIS MOUNTED LH BACK OF
CAB
Quote No. SB119C —
Page 3 of 16
Single Axle Diesel Diesel Plow Truck
Prepared for:
Prepared by:
Board of Public Works
Rich Stopczynski
City of South Bend IN
Truck Centers, Inc.
County City Bldg.
1011 W Sample St.
South Bend, IN 46601
South Bend, IN 46619
Phone:574-235-9251
Phone:574-289-4065
rtopczynski@truckcentersinc.com
Data Code Description
107-032
CUMMINS TURBOCHARGED 18.7 CFM AIR
COMPRESSOR WITH INTERNAL SAFETY VALVE
152-041
ELECTRONIC ENGINE INTEGRAL SHUTDOWN
PROTECTION SYSTEM
016-1 E2
RAISED RH OUTBOARD UNDER STEP
MOUNTED HORIZONTAL AFTERTREATMENT
SYSTEM ASSEMBLY WITH RH B-PILLAR
MOUNTED VERTICAL TAILPIPE
28F-002
ENGINE AFTERTREATMENT DEVICE,
AUTOMATIC OVER THE ROAD REGENERATION
AND DASH MOUNTED REGENERATION
REQUEST SWITCH
239-020
10 FOOT 00 INCH (120 INCH+O/-5.9 INCH)
EXHAUST SYSTEM HEIGHT
237-1 F8
RH CURVED VERTICAL TAILPIPE B-PILLAR
RAISED UNDER STEP MOUNTED
AFTERTREATMENT SYSTEM
23U-001
6 GALLON DIESEL EXHAUST FLUID TANK
30N-003
100 PERCENT DIESEL EXHAUST FLUID FILL
23Y-002
DIESEL EXHAUST FLUID PUMP MOUNTED AFT
OF DIESEL EXHAUST FLUID TANK
43X-002
LH MEDIUM DUTY STANDARD DIESEL EXHAUST
FLUID TANK LOCATION
43Y-001
STANDARD DIESEL EXHAUST FLUID TANK CAP
242-011
ALUMINUM AFTERTREATMENT
DEVICE/MUFFLER/TAILPIPE SHIELD
273-018
HORTON DRIVEMASTER ADVANTAGE ON/OFF
FAN DRIVE
276-002
AUTOMATIC FAN CONTROL WITH DASH
SWITCH AND INDICATOR LIGHT, NON -ENGINE
MOUNTED
110-003
CUMMINS SPIN ON FUEL FILTER
118-008
COMBINATION FULL FLOW/BYPASS OIL FILTER
266-017
1300 SQUARE INCH ALUMINUM RADIATOR
103-039
ANTIFREEZE TO -34F, OAT (NITRITE AND
SILICATE FREE) EXTENDED LIFE COOLANT
171-007
GATES BLUE STRIPE COOLANT HOSES OR
EQUIVALENT
172-001
CONSTANT TENSION HOSE CLAMPS FOR
COOLANT HOSES
270-016
RADIATOR DRAIN VALVE
360-013
1350 ADAPTER FLANGE FOR FRONT PTO
PROVISION
138-011
PHILLIPS-TEMRO 1000 WATT/115 VOLT BLOCK
HEATER
Quote —
Page 4 of 16
Diesel to
Single Axle Diesel Plow Truck
Axle
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
Data Code
140-022�
132-004
155-058
Description
CHROME ENGINE HEATER RECEPTACLE
MOUNTED UNDER LH DOOR
ELECTRIC GRID AIR INTAKE WARMER
DELCO 12V 38MT HD STARTER WITH
INTEGRATED MAGNETIC SWITCH
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
rstopczynski@truckcentersinc.com
342-582
ALLISON 3000 RDS AUTOMATIC TRANSMISSION
WITH PTO PROVISION
i vx//
343-344
ALLISON VOCATIONAL PACKAGE 235 -
AVAILABLE ON 3000/4000 PRODUCT FAMILIES
WITH VOCATIONAL MODELS RIDS, PTS AND HS
8413-012
ALLISON VOCATIONAL RATING FOR ON/OFF
HIGHWAY APPLICATIONS AVAILABLE WITH ALL
PRODUCT FAMILIES
84C-022
PRIMARY MODE GEARS, LOWEST GEAR 1,
START GEAR 1, HIGHEST GEAR 5, AVAILABLE
FOR 3000/4000 PRODUCT FAMILIES ONLY
84D-027
SECONDARY MODE GEARS, LOWEST GEAR 1,
START GEAR 2, HIGHEST GEAR 5, AVAILABLE
FOR 3000/4000 PRODUCT FAMILIES ONLY
84E-013
S1 PERFORMANCE PRIMARY SHIFT SCHEDULE,
AVAILABLE FOR 3000/4000 PRODUCT FAMILIES
ONLY
84F-012
S1 PERFORMANCE SECONDARY SHIFT
SCHEDULE, AVAILABLE FOR 3000/4000
PRODUCT FAMILIES ONLY
84G-012
2000 RPM PRIMARY MODE SHIFT SPEED
841-1-012
2000 RPM SECONDARY MODE SHIFT SPEED
84N-200
FUEL SENSE 2.0 DISABLED - PERFORMANCE -
TABLE BASED
84U-000
DRIVER SWITCH INPUT - DEFAULT - NO
SWITCHES
353-067
VEHICLE INTERFACE WIRING CONNECTOR
WITH PDM AND BLUNT CUTS, INSIDE CAB
34C-001
ELECTRONIC TRANSMISSION CUSTOMER
ACCESS CONNECTOR FIREWALL MOUNTED
341-018
MAGNETIC PLUGS, ENGINE DRAIN,
TRANSMISSION DRAIN, AXLE(S) FILL AND
DRAIN
345-003
PUSH BUTTON ELECTRONIC SHIFT CONTROL,
DASH MOUNTED
97G-004
TRANSMISSION PROGNOSTICS - ENABLED 2013
370-015
WATER TO OIL TRANSMISSION COOLER, IN
RADIATOR END TANK
Quote No. SB102219C —
Page 5 of 16
Single Axle Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone:574-235-9251
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone:574-289-4065
rstopczynski@truckcentersinc.com
Data Code
Description _w.......... —.......
........
346-003
�............._.. .,
TRANSMISSION OIL CHECK AND FILL WITH
ELECTRONIC OIL LEVEL CHECK
35T-001
SYNTHETIC TRANSMISSION FLUID (TES-295
COMPLIANT)
400-1BB
DETROIT DA-F-20.0-5 20,000# FL1 71,0 KPI/3.74
DROP SINGLE FRONT AXLE
402-030
MERITOR 16.5X6 Q+ CAST SPIDER CAM FRONT
BRAKES, DOUBLE ANCHOR, FABRICATED
SHOES AND TYPE 20 CHAMBERS
403-002
NON -ASBESTOS FRONT BRAKE LINING
419-023
CONMET CAST IRON FRONT BRAKE DRUMS
427-001
FRONT BRAKE DUST SHIELDS
409-006
FRONT OIL SEALS
408-001
VENTED FRONT HUB CAPS WITH WINDOW,
CENTER AND SIDE PLUGS - OIL
416-022
STANDARD SPINDLE NUTS FOR ALL AXLES
405-003
HALDEX AUTOMATIC FRONT SLACK
ADJUSTERS
406-001
STANDARD KING PIN BUSHINGS
536-055
TRW THP-60 POWER STEERING WITH RCH45
AUXILIARY GEAR
539-003
POWER STEERING PUMP
534-003
4 QUART POWER STEERING RESERVOIR
533-001
OIL/AIR POWER STEERING COOLER
40T-001 ORGANIC SAE 80/90 FRONT AXLE LUBE
620-006 20,000# FLAT LEAF FRONT SUSPENSION
619-004 GRAPHITE BRONZE BUSHINGS WITH SEALS -
FRONT SUSPENSION
62G-998 NO FRONT SUSPENSION OPTIONS
410-001 FRONT SHOCK ABSORBERS
% '
'�i�%�.'.��„l�%� rv,rri,,,,,,,/fi✓/%/��««�..�/,%,,,<,<„�„/ ��,,, ,r, ,,,,,, �.., ,..
420-022 RS-26-185 26,000# T-SERIES SINGLE REAR
AXLE
421-614 6.14 REAR AXLE RATIO
424-001 IRON REAR AXLE CARRIER WITH STANDARD
AXLE HOUSING
386-073 MXL 17T MERITOR EXTENDED LUBE MAIN
DRIVELINE WITH HALF ROUND YOKES
Quote No. SB102219C — _ Page 6 of 16
Single Axle Diesel Plow Truck
Prepared for:
Prepared by:
Board of Public Works
Rich Stopczynski
City of South Bend IN
Truck Centers, Inc.
County City Bldg„
1011 W Sample St.
South Bend, IN 46601
South Bend, IN 46619
Phone: 574-235-9251
Phone: 574-289-4065
rtopczynski@truckcentersinc.com
Data Code Description
423-010
MERITOR 16.5X7 P CAST SPIDER CAM REAR
BRAKES, DOUBLE ANCHOR, CAST SHOES AND
TYPE 30 CHAMBERS
433-002
NON -ASBESTOS REAR BRAKE LINING
434-011
BRAKE CAMS AND CHAMBERS ON FORWARD
SIDE OF DRIVE AXLE
451-030
WEBB HEAVYWEIGHT CAST IRON REAR BRAKE
DRUMS
425-002
REAR BRAKE DUST SHIELDS
440-006
REAR OIL SEALS
426-100
WABCO TRISTOP D LONGSTROKE 1-DRIVE
AXLE SPRING PARKING CHAMBERS
428-003
HALDEX AUTOMATIC REAR SLACK ADJUSTERS
41T-001
ORGANIC SAE 80/90 REAR AXLE LUBE
42T-001
STANDARD REAR AXLE BREATHER
622-1 DF
30,000# FLAT LEAF SPRING REAR SUSPENSION
WITH HELPER AND RADIUS ROD
621-001
SPRING SUSPENSION - NO AXLE SPACERS
431-001
STANDARD AXLE SEATS IN AXLE CLAMP
GROUP
623-005
FORE/AFT CONTROL RODS
490-100
WABCO 4S/4M ABS
871-001
REINFORCED NYLON, FABRIC BRAID AND WIRE
BRAID CHASSIS AIR LINES
904-001
FIBER BRAID PARKING BRAKE HOSE
412-001
STANDARD BRAKE SYSTEM VALVES
46D-002
STANDARD AIR SYSTEM PRESSURE
PROTECTION SYSTEM
413-002
STD U.S. FRONT BRAKE VALVE
432-003
RELAY VALVE WITH 5-8 PSI CRACK PRESSURE,
NO REAR PROPORTIONING VALVE
480-088
WABCO SYSTEM SAVER HP WITH INTEGRAL
AIR GOVERNOR AND HEATER
483-004
WABCO OIL COALESCING FILTER FOR AIR
DRYER
479-006
AIR DRYER MOUNTED OUTBOARD ON RH RAIL
460-1AE
STEEL AIR TANKS MOUNTED FOR MAX
GROUND CLEARANCE FOR BELLY PLOW
477-001
PULL CABLE ON WET TANK, PETCOCK DRAIN
VALVES ON ALL OTHER AIR TANKS
Quote No. SB102219C —
Page 7 of 16
Single Axle Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone:574-235-9251
Data Code Description
7/
11 ✓i airc,,,,,,,, ,,,, ,
914-025 AIR CONNECTIONS TO END OF FRAME WITH
GLAD HANDS FOR TRUCK AND DUST COVERS
296-027 PRIMARY CONNECTOR/RECEPTACLE WIRED
FOR COMBINATION STOP/TURN, CENTER PIN
POWERED THROUGH IGNITION WITH STOP
SIGNAL PREWIRE PACKAGE
297-001 SAE J560 7-WAY PRIMARY TRAILER CABLE
RECEPTACLE MOUNTED END OF FRAME
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone:574-289-4065
rstopczynski@truckcentersinc.com
335-004
UPGRADED CHASSIS MULTIPLEXING UNIT
545-412
4125MM (162 INCH) WHEELBASE
546-102
7/16X3-9/16X11-1/8 INCH STEEL FRAME
(11.11MMX282.6MM/0.437X11.13 INCH) 120K PSI
547-034
PARTIAL INNER FRAME REINFORCEMENT AT
FRONT SUSPENSION
552-030
1600MM (63 INCH) REAR FRAME OVERHANG
549-002
24 INCH INTEGRAL FRONT FRAME EXTENSION
AC8-99D
CALC'D BACK OF CAB TO REAR SUSP C/L (CA)
96.85 in
553-001
SQUARE END OF FRAME
550-001
FRONT CLOSING CROSSMEMBER
559-001
STANDARD WEIGHT ENGINE CROSSMEMBER
562-001
STANDARD MIDSHIP #1 CROSSMEMBER(S)
572-038
REARMOST CROSSMEMBER MOUNTED WITH
LAST CROSSMEMBER 13 INCHES FROM END
OF FRAME
565-001
STANDARD SUSPENSION CROSSMEMBER
00 '�:..
1��Jt�%v „
556-1 E7
14 INCH PAINTED STEEL SEVERE DUTY
BUMPER
574-001 BUMPER MOUNTING FOR SINGLE LICENSE
PLATE
551-001 HUCK-SPIN ROUND COLLAR CHASSIS
FASTENERS SUSPENSIONS ONLY
204-195 60 GALLON/227 LITER RECTANGULAR
ALUMINUM FUEL TANK - LH
218-005 RECTANGULAR FUEL TANK
215-005 PLAIN ALUMINUM FUEL TANK WITH PAINTED
BANDS
212-011 FUEL TANK FORWARD - RAISED MOUNTING
Quote Axle
Diesel to — Page 8 of 16
Single Axle Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
Data Code Description
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
rstopczynski@truckcentersinc.com
664-001
PLAIN STEP FINISH
205-001
FUEL TANK CAP
122-1J1
DETROIT FUELNVATER SEPARATOR WITH
WATER IN FUEL SENSOR, HAND PRIMER AND
12 VOLT PREHEATER
216-020
EQUIFLO INBOARD FUEL SYSTEM
202-016
HIGH TEMPERATURE REINFORCED NYLON
FUEL LINE
213-001
INSULATION FOR FUEL LINES
093-2CC
MICHELIN XZU-S2 315/8OR22.5 20 PLY RADIAL
FRONT TIRES
094-OE3
MICHELIN XDS 12R22.5 16 PLY RADIAL REAR
TIRES
rrr
/
418-060
CONMET PRESET PLUS PREMIUM IRON FRONT
HUBS
450-060
CONMET PRESET PLUS PREMIUM IRON REAR
HUBS
r / r
�4 r r ,r/rr////�///// / it
o rrrrrrrr
/rrrr
/
502-433
ACCURIDE 29039 22.5X9.00 10-HUB PILOT 5.25
INSET 5-HAND STEEL DISC FRONT WHEELS
505-445 ACCURIDE 29300 22.5X9.00 10-HUB PILOT 5-
HAND STEEL DISC REAR WHEELS
50T-998 NO FRONT HUB COVERS
MR/t �' 1''�"�j J
829-1A2 114 INCH BBC FLAT ROOF ALUMINUM
CONVENTIONAL CAB
650-008
AIR CAB MOUNTING
648-002
NONREMOVABLE BUGSCREEN MOUNTED
BEHIND GRILLE
667-037
SHORT FENDER WITH MUDFLAP
754-017
BOLT -ON MOLDED FLEXIBLE FENDER
EXTENSIONS
678-018
LH AND RH EXTERIOR GRAB HANDLES WITH
SINGLE RUBBER INSERT
645-002
BRIGHT FINISH RADIATOR SHELL/HOOD BEZEL
646-042
STATIONARY BLACK GRILLE WITH BRIGHT
ACCENTS
65X-003
CHROME HOOD MOUNTED AIR INTAKE GRILLE
644-004
FIBERGLASS HOOD
690-002 TUNNEURREWALL LINER
Quote No. SB102219C — �� Page 9 of 16
Single Axle Diesel Plow Truck
Prepared for:
Prepared by:
Board of Public Works
Rich Stopczynski
City of South Bend IN
Truck Centers, Inc.
County City Bldg.
1011 W Sample St.
South Bend, IN 46601
South Bend, IN 46619
Phone: 574-235-9251
Phone: 574-289-4065
rstopczynski@truckcentersinc.com
Data Code Description
727-1AF
14 INCH ROUND HADLEY AIR HORN UNDER LH
DECK
726-002
DUAL ELECTRIC HORNS
728-001
SINGLE HORN SHIELD
657-001
DOOR LOCKS AND IGNITION SWITCH KEYED
THE SAME
327-012
SWITCH, INDICATOR LIGHT AND WIRING FOR
(2) CUSTOMER FURNISHED BEACONS
312-067
LED HEADLAMPS WITH BRIGHT BEZELS
302-047
LED AERODYNAMIC MARKER LIGHTS
294-017
INTEGRAL STOP/TAIL/BACKUP LIGHTS WITH 7
EXTRA FEET OF WIRE MOUNTED AT END OF
FRAME
300-015
STANDARD FRONT TURN SIGNAL LAMPS
469-998
NO WORK LIGHT
744-1 BC
DUAL WEST COAST BRIGHT FINISH HEATED
MIRRORS WITH LH AND RH REMOTE
797-001
DOOR MOUNTED MIRRORS
796-001
102 INCH EQUIPMENT WIDTH
743-204
LH AND RH 8 INCH BRIGHT FINISH CONVEX
MIRRORS MOUNTED UNDER PRIMARY
MIRRORS
7413-1 B4
RH AND LH 8 INCH HEATED STAINLESS STEEL
FENDER MOUNTED CONVEX MIRRORS WITH
TRIPOD BRACKETS
729-001
STANDARD SIDE/REAR REFLECTORS
677-062
FIXED CAB MOUNTED STEPS LH AND RH FOR
CAB ENTRY, BELLY PLOW BODY WITH HIGH
GROUND CLEARANCE
768-043
63X14 INCH TINTED REAR WINDOW
661-003
TINTED DOOR GLASS LH AND RH WITH TINTED
NON -OPERATING WING WINDOWS
654-027
RH AND LH ELECTRIC POWERED WINDOWS,
PASSENGER SWITCHES ON DOOR(S)
663-013
TINTED WINDSHIELD
659-019
2 GALLON WINDSHIELD WASHER RESERVOIR
WITHOUT FLUID LEVEL INDICATOR, FRAME
MOUNTED
Quote Axle
Diesel Plow
— Page 10 of 16
Single Axle Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
rtopczynski@truckcentersinc.com
Data Code
Description
707 1AK
�,,,,,,,,,,,..... .,,..... .,,,. ,,.,.,, .,
OPAL GRAY VINYL INTERIOR
706-026
MOLDED PLASTIC DOOR PANEL WITHOUT
VINYL INSERT WITH ALUMINUM KICKPLATE
LOWER DOOR
708-026
MOLDED PLASTIC DOOR PANEL WITHOUT
VINYL INSERT WITH ALUMINUM KICKPLATE
LOWER DOOR
772-006
BLACK MATS WITH SINGLE INSULATION
785-004
DASH MOUNTED ASH TRAY WITHOUT LIGHTER
691-008
FORWARD ROOF MOUNTED CONSOLE WITH
UPPER STORAGE COMPARTMENTS WITHOUT
NETTING
694-010
IN DASH STORAGE BIN
742-007
(2) CUP HOLDERS LH AND RH DASH
680-006
GRAY/CHARCOAL FLAT DASH
860-004
SMART SWITCH EXPANSION MODULE
700-002
HEATER, DEFROSTER AND AIR CONDITIONER
701-008
STANDARD HVAC DUCTING WITH SNOW
SHIELD FOR FRESH AIR INTAKE
703-005
MAIN HVAC CONTROLS WITH RECIRCULATION
SWITCH
170-015
STANDARD HEATER PLUMBING
130-041
VALEO HEAVY DUTY A/C REFRIGERANT
COMPRESSOR
702-002
BINARY CONTROL, R-134A
739-033
STANDARD INSULATION
285-013
SOLID-STATE CIRCUIT PROTECTION AND
FUSES
280-007
12V NEGATIVE GROUND ELECTRICAL SYSTEM
324-011
DOME DOOR ACTIVATED LH AND RH, DUAL
READING LIGHTS, FORWARD CAB ROOF
655-005
LH AND RH ELECTRIC DOOR LOCKS
284-101
(1) 12V POWER SUPPLY (1) DUAL 2.1 AMP USB
CHARGER IN DASH
756-1D9
PREMIUM HIGH BACK AIR SUSPENSION DRIVER
SEAT WITH 3 CHAMBER AIR LUMBAR,
INTEGRATED CUSHION EXTENSION, FORWARD
AND REAR CUSHION TILT, ADJUSTABLE SHOCK
ABSORBER
760-1 DC
BASIC HIGH BACK NON -SUSPENSION
PASSENGER SEAT
759-007
DUAL DRIVER SEAT ARMRESTS, NO
PASSENGER SEAT ARMRESTS
Quote —
Page 11 of 16
Diesel131 �r!r�l
Plow
Single Axle Diesel Plow Truck "��
Axle
Prepared for:
Prepared by:
Board of Public Works
Rich Stopczynski
City of South Bend IN
Truck Centers, Inc.
County City Bldg.
1011 W Sample St.
South Bend, IN 46601
South Bend, IN 46619
Phone:574-235-9251
Phone:574-289-4065
rstopczynski@truckcentersinc.com
Data Code
Description
711-004
LH AND RH INTEGRAL DOOR PANEL ARMRESTS
758-036
VINYL WITH VINYL INSERT DRIVER SEAT
761-036
VINYL WITH VINYL INSERT PASSENGER SEAT
763-102
HIGH VISIBILITY ORANGE SEAT BELTS
532-002
ADJUSTABLE TILT AND TELESCOPING
STEERING COLUMN
540-015
4-SPOKE 18 INCH (450MM) STEERING WHEEL
765-002
DRIVER AND PASSENGER INTERIOR SUN
VISORS
w�j�,�rW
732-004
GRAY DRIVER INSTRUMENT PANEL
734-004
GRAY CENTER INSTRUMENT PANEL
870-001
BLACK GAUGE BEZELS
486-001
LOW AIR PRESSURE INDICATOR LIGHT AND
AUDIBLE ALARM
840-002
2 INCH PRIMARY AND SECONDARY AIR
PRESSURE GAUGES
198-025
INTAKE MOUNTED AIR RESTRICTION
INDICATOR WITHOUT GRADUATIONS
721-025
97 DB BACKUP ALARM MOUNTED INBOARD OF
RAIL
149-013
ELECTRONIC CRUISE CONTROL WITH
SWITCHES IN LH SWITCH PANEL
156-007
KEY OPERATED IGNITION SWITCH AND
INTEGRAL START POSITION; 4 POSITION
OFF/RUN/START/ACCESSORY
811-042
ICU3S, 132X48 DISPLAY WITH DIAGNOSTICS, 28
LED WARNING LAMPS AND DATA LINKED
160-038
HEAVY DUTY ONBOARD DIAGNOSTICS
INTERFACE CONNECTOR LOCATED BELOW LH
DASH
844-001
2 INCH ELECTRIC FUEL GAUGE
148-003
PROGRAMMABLE RPM CONTROL -
ELECTRONIC ENGINE
856-001
ELECTRICAL ENGINE COOLANT TEMPERATURE
GAUGE
864-001
2 INCH TRANSMISSION OIL TEMPERATURE
GAUGE
830-017
ENGINE AND TRIP HOUR METERS INTEGRAL
WITHIN DRIVER DISPLAY
852-002
ELECTRIC ENGINE OIL PRESSURE GAUGE
679-001
OVERHEAD INSTRUMENT PANEL
Quote No. SB119C —
Page 12 of 16
Diesel �
Single Axle Diesel Plow Truck �....._. .
Prepared for:
Prepared by:
Board of Public Works
Rich Stopczynski
City of South Bend IN
Truck Centers, Inc.
County City Bldg.
1011 W Sample St.
South Bend, IN 46601
South Bend, IN 46619
Phone:574-235-9251
Phone:574-289-4065
rtopczynski@truckcentersinc.com
Data Code Description
740-115
AM/FMNVB WORLD TUNER RADIO WITH
BLUETOOTH AND USB AND AUXILIARY INPUTS,
J1939
747-001
DASH MOUNTED RADIO
750-002
(2) RADIO SPEAKERS IN CAB
753-001
AM/FM ANTENNA MOUNTED ON FORWARD LH
ROOF
748-001
POWER AND GROUND STUDS IN/UNDER DASH
810-027
ELECTRONIC MPH SPEEDOMETER WITH
SECONDARY KPH SCALE, WITHOUT
ODOMETER
817-008
STANDARD VEHICLE SPEED SENSOR WITH
ADDITIONAL SIGNAL FOR CUSTOMER USE
LOCATED BETWEEN DRIVER AND PASSENGER
SEATS
812-001
ELECTRONIC 3000 RPM TACHOMETER
813-998
NO VEHICLE PERFORMANCE MONITOR
162-002
IGNITION SWITCH CONTROLLED ENGINE STOP
329-091
(6) IGN CONTROLLED EXTRA SWITCHES WITH
IND LIGHTS WIRED TO POWER DIST BOX WITH
RELAYS PROVIDING 20 AMPS PER CIRCUIT TO
JUNCTION BLOCK AND 1 CIRCUIT AT 30 AMPS
81Y-001
PRE -TRIP LAMP INSPECTION, ALL OUTPUTS
FLASH, WITH SMART SWITCH
482-001
BW TRACTOR PROTECTION VALVE
883-001
TRAILER HAND CONTROL BRAKE VALVE
836-015
DIGITAL VOLTAGE DISPLAY INTEGRAL WITH
DRIVER DISPLAY
660-025
SINGLE ELECTRIC WINDSHIELD WIPER MOTOR
WITH DELAY PROGRAMMED TO SLOWEST
SPEED WITH PARK BRAKE SET
304-039
MARKER LIGHT SWITCH INTEGRAL WITH
HEADLIGHT SWITCH AND DUAL CONNECTORS
AND SWITCH FOR CUSTOMER FURNISHED
SNOW PLOW LIGHTS, LOW BEAMS OFF WITH
HIGH BEAMS
882-021
TWO VALVE PARKING BRAKE SYSTEM WITH
DASH VALVE CONTROL AUTONEUTRAL AND
WARNING INDICATOR
299-013
SELF CANCELING TURN SIGNAL SWITCH WITH
DIMMER, WASHERNVIPER AND HAZARD IN
HANDLE
298-039
INTEGRAL ELECTRONIC TURN SIGNAL
FLASHER WITH HAZARD LAMPS OVERRIDING
STOPLAMPS
Quote No. —
Page 13 of 16
Single Axle Diesel Diesel Plow Truck �
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
rstopczynski@truckcentersinc.com
Data Code
Description
065-000
PAINT: ONE SOLID COLOR
.. ......
980-5F6
CAB COLOR A: L0006EB WHITE ELITE BC
986-020
BLACK, HIGH SOLIDS POLYURETHANE
CHASSIS PAINT
962-972
POWDER WHITE (N0006EA) FRONT WHEELS
966-972
POWDER WHITE (N0006EA) REAR WHEELS
964-020
STANDARD BLACK BUMPER PAINT
963-003
STANDARD E COAT/UNDERCOATING
996-001 U.S. FMVSS CERTIFICATION
� ..
WAI-47J CUMMINS ENGINE WARRANTY:
5 YEARS / 150,000 MILES / 100% PARTS & LABOR
WAX-102 CUMMINS AFTERTREATMENT WARRANTY:
5 YEARS 1150,000 MILES
WAK-251 ALLISON TRANSMISSION EXTEND WARRANTY:
5 YEARS/UNLIMITED MILES
WIRE
20A FEED AND GROUND, 15A IGNITION FEED
DASH CENTER WITH 2' WIRE HARNESS
RUST
ZIEBART
BOOKS
MANUALS FOR ALL EQUIPMENT
SVC
1 YEAR SUBSCRIPTION -TROUBLESHOOTING
SOFTWARE
SITE
ACCESS TO PARTS AND SERVICE ONLINE
TCM
TRANSMISSION CONTROL MODULE MOVED
INSIDE CAB
Quote No. SB102219C — Page 14 of 16
Single Axle Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone: 574-235-9251
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone: 574-289-4065
Stopczynski@truckcentersinc.com
Quote No, SB1
Diesel Plow
— Page 15 of 16
Single Axle Diesel Plow Truck
Prepared for:
Board of Public Works
City of South Bend IN
County City Bldg.
South Bend, IN 46601
Phone:574-235-9251
Prepared by:
Rich Stopczynski
Truck Centers, Inc.
1011 W Sample St.
South Bend, IN 46619
Phone:574-289-4065
rstopczynski@truckcentersinc.com
Quote No. SB102219C — Page 16 of 16
Single Axle Diesel Plow Truck
South Send Central Services Phone: 574-235-9316 Quote # MACQ4661
Matt Chlebowski
1045 W. Sample St.
South Bend, IN 46619
Fax: 574-235-90D7
E-Mail: mchlebow@southbendin.gov Delivery:
Date: 10/15/2019
Salesman:
Denny McIntyre
Description
ty Unit . Price
Provide And Install Following: Street Single Spec F 2019 / 2020 Single Arde Specificaitons Opens
1
$82,987.00
$82,987.00
10-22-19
Body Stainless Steel
Height 5211
III
Capacity:19110 Cubic Yards SideHeight 46" Tailgate
Length:
Co
Body Gauge Of Body 7 Gauge Floor
Hoist Model Telescopic Mailiot hlitriate (double Acting)
Cabshield 1/2: Tailgate Air
Understnicture 7 Ga Crossmembedess
Floor 1.14" Stainless Steel With Removable Auger Cover
Dual Auger Discharge System With Botom Grates
Dirt Shedder Formed Sides: Formed (Front Post:: Full Depth Rear Post:
Body Prop: Body Up Light: Back Up Alarm:
Mud Flaps Front And Reartarp Rod On Body: Ladder With Inside Step:
Add Leaf Box Hold Downs D Rings:
Tarp Pull Right Per Specifeiations
i er Air Brakes Ran To Rear Of Chassis:
Rear Tow Hooks:: TraI
3 Piece Spreader Apron
Shovel }Molders
Reflective Tape
Underside Of Bed To Be Armour Super Sealed.
Painted To Match The Chassis Per Specifications:
Light System: Electrical All Conectlons Per Specificaitons: Truck Lite Led Plow Lights Mounted On
Stainless Steel Breackets On Chassis Hood: 4 Stop Tail Brake tights/ Whalen Amber Nylon
Alternating Strobe Flashig Lights One Per Side Two Back Up Lights All Mounted In Rear Post:
Sealed Lighting System: 6 L E D Strobes Mounted Under Cab Shield Facing Forward And 6 Led.
Strobe Light Facing Rearward In Cab Shlied/ Set Of L E D Amber Strobes Under Cab Shilad Facing
Toward Each Side> Underbody Light: Two Spreader Lights:
Rear Pintle Hitch Holland Ph-t - 60 Al And Off Set Per Specifications:.
Hydraulic System: Slim Line Hydraulic Tank Between Cab And Body/ Complete System To Include
Load 'Sense Pump Four Cubic Inches, Fredom Spreader Control Valve To Be Enclosed Stainless
Sealed Box / Duat Caps / All Fitings Hoses Etc To Make A Complete System:
34" Husting Plow Hiich Installed Per Specifications With 3 X 10 Da Lift Cylinder.
U'nderbody To Be Monroe Ms 4500-10 Wilth Grease Lines & End Bits
Vibrator Installed
Alternate #1 Plow Monroe Mp41r11
1
$10,435.00
$10,435.00
Mouse Ears Both Sides: Full Trip :made To Fit 34" Husting Hitch
Rubber Snow Deflector Provided And Installed
Complete Set Of Snow Wheels With Adjusters Installed.
Alternate # Electirc Joy Stick Controls
1
$5,163.00
$5,163.00
SubTotal $98,585.00
Sales Tax $0.00
Total $98,585.00
Columbia City office Indianapolis Office
New Haven Office Page
1171 S Williams Street 2102 Clay Street
P. 0, Box 5% 1
Columbia City, IN 46725 Indianapolis. IN 46206
Now Haven, IN 46774
Pnone 7661 Phone:317.377.04407
Phone:260-748.4100
Fax:2W.244.7662 Fax:317.37743427
Fax: 2r 1.748A121
1 of 2
FTL Coverage Sheet
TIME AND DISTANCE TABLES
Freightliner SD Vocational
1 ime and Distance'"a les
1.1 Freightliner SIB Vocational
........................ _....._W..........__..................._..... �
Applicable Models 108SDI114SD
._..._
SD Vocational covera e- ... n"I'.............. � �.-.-............--...--......._...-_
g s only available for vehicles ordered with Detroit DD8, Cummins 8, C, or L
�_r ..�._..
these engines:
SD Vocational ovalis not coverage ..................�-� ww----.....�_...........___..._..............--......._._...---
g available for vehicles in these voca- Logging, Mining, Oil Field
�.-_...-...._._.......n
tions:
Category Determinants. _...�.�--.................._._....._.._.....mm
......._.._....
................................... W_---__------------..... _._--._----__ �.....
<30% off -highway rough, maintained concrete/asphalt; maintained
Road Surface -most severe in -transit between sites
gravel/crushed rock; maintained dirt
or soft soil (Class C or D roads)
-.-............... .----..--._-_._._M..............................................�
Gross Combined Weight Rating 92,000 Ib/41 730 kg or less
.... ........
._.-------------------��......----._.-_.------
Axles and Manufacturer's Gross Vehicle Weight Rating
..... ..................... �...........
2-Axle Unit 146,000 Ib/20 865 kg or less
_ .. _......
.............................. 3-Axle Unit _._...
66,000 Ib/29 937 kg or less
_...._..................................................
4-Axle Unit N/A
ww�................................................. �.......................... 5-Axle Unit N/A
�
1 Class C roads have a natural surface and may be either constructed or established over time b repeated
y peated passage
of e
of vehicles. The natural surface may be
dirt, sand, or rock. A minimal amount of maintenance, if any at all, is limited primarily to spot surface grading to allow vehicle passage within the original road
corridor. Class D roads are primitive roads that were not constructed but have been established over time by the
passage of motor vehicles. These roads
receive no maintenance or grading.
------------- __._°_ -.............................Cover.._ Z
age
.....----W_.._............._............--............._W..
.............. __...... ....-........--......................._._._......................_........
Description Time3
Distance3
w--------------------_........._---�
Basic Vehicle 2 Years
Unlimited
................ _ _ _.....................
Battery 1 Year
100,000 mi/161000 km
Bnghtwork �.........� w......6..Months_.........___ _-.._
Unlimited
Cab Corrosion/Perforation 5 Years
Unlimited
Cab Structure �� — _.-..........
5 Years
100,000 mi/161000 km
..Corrosion...�.............----...--.....--....._ ...... 6 Months _................................Unlimited
6._................................... -..-----
Crossmembers 5 Years
Unlimited
..._�.............
Emission Regulations4
............w-- .,
Diesel Emission 20105..........................-....._-.�---_� .--......�.-._......m__�
5 Years
w w�........ .
100,000 mi/161000 km
GHG14/176 (Medium Heavy Duty to Heavy Heavy Duty ..actor... ..
6 Trucks/Tractors) 5 Years
.................................. ....... �_......--_W.
100,000 mi/161000 km
_.......... ----- w.............. ..................
GHG14/176 Tire (File Direct) 2 Years
........��........
24,000 mi/38 400 km
Frame Rails 5 Years
Unlimited
_................. ............... .._ ..- ......... ........_._... ..m.
Front/Steer Axle
.........._...........................
®e� .��.................------ -
troit8 3 Years
300,000 mi/483 000 km
............................. __..
Non -Detroit 2 Years
Unlimited
Paint 1 Year
100,000 mi/161000 km
Paint, -Chassis 6 Months
----._--._......Unlimited--.. -- ...----
............. ..W _ _._........... _....._....._ ......
Rear Axle9
_.._------------------.........._...-------- ...... m_____............
Detroit$ 3 Years
-............. ---- .............. . ........w.
300,000 mi/483 000 km
Non -Detroit 2 Years
Unlimited
DISCLAIMER: Failure to read or distribute this information does not provide exemption from compliance with the information contained herein. Spec-
ifications are subject to change without notice. Intended for general information only, not offered as customer's Warranty.
WAR602 Copyright (c) Daimler Trucks North America, LLC. All rights reserved.
Revised 1/3/19 Daimler Trucks North America, LLC. is a Daimler company.