HomeMy WebLinkAbout1314 East Wayne Street_COA 2019-0329_PACKET continuedSTAFF REPORT
CONCERNING APPLICATION FOR A
CERTIFICATE OF APPROPRIATENESS
Date: May 6, 2019
Application Number: 2019-0329 Continued
Property Location: 1314 East Wayne Street
Architectural Style/Date/Architect or Builder: Neoclassical/1926/Whitcomb &
Keller, H.R. Stapp
Property Owner: Valerie Schey and John Sherry
Landmark or District Designation: East Wayne Street, Ordinance #7796-87
Rating: Contributing
DESCRIPTION OF STRUCTURE/ SITE: Two and a half story Neoclassical house with a rectangular plan with
one story addition on rear. House is elevated from street. Roof is slate shingles with gable returns, two small gable
dormers in front with slate on sidewalls. A one-story wing has a low-pitched roof. Windows are primarily original
wood 8/1 double hung with a paired 6/1 double hung in front center second story. There is a central pedimented
entry with simple entablature, paired doric columns and pilasters at door. Façade is brick. There is a two car, two
door brick gable roof garage in rear.
ALTERATIONS: COA 2016-0523 replaced 4’ wood picket fence with 6’ dog-eared wood privacy fence, in same
fence line; RME 2012-0426 removed dead crabapple tree in rear yard; COA 1996-0917 replaced flat roof over
kitchen with roof similar to roof over sunroom and replaced picket fence in kind; COA 1996-0618 constructed a
low pitched hip roof over existing flat roof at sunroom at west end of house with membrane roofing and fiberglass
shingle; COA 1996-0116 installed aluminum storm/screen combination windows to replace existing of sunroom;
COA 1995-0616 removed storm damaged maple tree on tree lawn at the recommendation of Custom & Moore and
the City of South Bend; COA 1994-0419 changed front door (saving and storing the original), installation of a
screen door, installation of decorative shutters; COA 1994-0223 replaced five attic windows with the conditions
that true divided light or applied exterior muntins be supplied by manufacturer and installed, all five original
windows to be stored, applicant supply HPC with photo documentation of completed project.
APPLICATION ITEMS: “New windows”
DESCRIPTION OF PROPOSED PROJECT: Owner has applied for seventeen (17) original wood windows to
be replaced with Renewal by Anderson Fibrex vinyl/wood composite windows. The windows proposed to be
replaced are on the first and second stories of the main house; no new windows on the one-story wing; no new
windows on the third story; no new windows in the rear addition.
At the April 15, 2019 meeting of the Historic Preservation Commission, the Commission expressed their position
about determining the condition of the existing original window to the house. The Certificate of Appropriateness
was “continued” to provide the owner with additional time to engage with window repair professionals to
determine the condition of the existing windows and of the feasibility of repairing the existing windows.
Owner reported that two window repair providers have assessed their situation and determined that they are unable
to handle the scope of repairs, a third has not responded to calls, and a fourth has provided a proposal for repair of
the existing windows and storm windows, determining that the windows are not deteriorated beyond repair and at a
lower cost than the proposed replacement.
Owner has supplied the following description of the problems they are having: some of the windows are warped
and won't close, some of the windows have interior rot, there is water damage on the interior of some of the
windows, some of them no longer open, and because of the misalignment caused by the above issues, the windows
are very drafty. See email for additional information provided by owner.
From photographs provided by the owner and Renewal by Anderson, staff acknowledges visible peeling paint on
the wood storm windows on the first story, some broken sash cords, intermittent glazing failure, and layers of paint
build up. No determination has been made as to if the windows are deteriorated beyond repair. Staff recommends
that the owner engage a window restoration professional to determine the condition of the windows and the
feasibility for repair.
The proposed windows will be inserts, utilizing the existing jamb which commonly results in a slight reduction to
the amount of glazing overall. Exterior trim will not be affected other than a “mini coil over the stops on the
exterior”. The window pane pattern will be replicated for each window using “interior wood grilles”. Regarding the
"grilles", in a 1994 COA, a conditional approval was made for the attic windows to be replaced with true divided
light. To remain consistent with the precedent that approval set, if approved for replacement, Staff recommends the
"full divided light" in lieu of the "interior grilles" so they replicate the depth of the original true divided light. With
a replicated pane pattern and full divided light, the vinyl/wood composite windows resemble the original aesthetic
look.
PRESERVATION INSPECTOR REPORT: On March 19, 2019, I visited the property located at 1314 E Wayne
N. The property owner has begun the COA application process to replace windows on the structure. I had not
received a detail of which windows were part of the application, so I created an inventory of the entire structure. I
was instructed to inspect from the outside only as the owner has many dogs and she would provide interior photos.
Every window has a storm window in place. As a result, I am unable to make a determination on the condition of
the windows in their current state. Several of the wood storms on the first floor appeared to be ajar or not closed
tightly as the photographs will indicate.
North (front)
Third floor-
Two casement windows in dormers, look to be replacements with flat gridwork
Second floor-
Four double hung windows with aluminum storms. Look to be original with divided (2)6/1 and (2)8/1 light
pattern
First floor-
Four double hung windows with wood storms. Look to be original with divided 8/1 light pattern
Basement-
Two vinyl
East (left side from street)
Third floor-
Half-moon with flat gridwork, not original
Second floor-
Two double hung windows with aluminum storms. Look to be original with 8/1 light pattern
First floor-
Two double hung windows with wood storms. Look to be original with 6/1 light pattern
One replacement window, ill-fitting with spacer to fill void
Basement-
One vinyl
West (right side from street)
Third floor-
Two quarter round windows, ill-fitted replacements with flat divisions
Second floor-
Two double hung windows with aluminum storms. Look to be original with 6/1 light pattern
First floor-
Addition has Eight total replacement double hung windows with flat grid 8/1 pattern. These also have
aluminum storm windows
South (rear of house from street)
Third floor- no windows
Second floor-
Three double hung windows with aluminum storms. Look to be original (2) 6/1 and (1) 8/1 pattern
First floor-
One double hung window with wood storm. Looks to be original with 8/1 pattern
Rear addition-
Triple window bay non-original window
STANDARDS AND GUIDELINES: EAST WAYNE STREET
II. EXISTING STRUCTURES
A. WINDOWS AND DOORS
Window and door frames are of wood or steel (some casements) or in the case of brick structures, stone
sills and brick lintels. Where metal or vinyl siding has been applied, window trim has been covered.
Storm windows are of wood and aluminum.
Required
Original windows and doors shall be retained including sashes, lintels, sills, shutters, decorative
glass, pediments, hoods, and hardware. When deteriorated beyond repair, they shall be replaced
with units and trim resembling the original
Recommended
Wood frame storm windows and doors painted to match the original should not be used but should not
damage existing frames. If new sashes or doors are installed, the existing or original materials, design,
and hardware should be used. When metal storm doors are used they should be painted, anodized or
coated to match the existing. When awnings are used they should be of canvas material.
Prohibited
Original doors, windows, and hardware shall not be discarded when they can be restored and used in
place. New window and door openings which would alter the scale and proportion of the building shall
not be introduced. Inappropriate new windows and door features such as aluminum insulating glass
combinations that require removal of the original windows and doors shall not be installed.
Not Recommended
Awnings, hoods, and fake shutters made of metal, vinyl, or fiberglass should not be used if they would
detract from the existing character or appearance of the building
STAFF RECOMMENDATION: Although the proposed windows resemble the original, without a determination
that the original windows are deteriorated beyond repair or that a repair is not economically feasible, per the
Standards for East Wayne Street Local Historic District, Staff does not offer a recommendation to the Commission.
Staff does not recommend the proposed project.
Report compiled by
Elicia Feasel, Historic Preservation Administrator
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
LOCATION MAP - Map showing location of the property and surrounding area (Google Maps)
AERIEL MAP - highlighted property on map
Sanborn 1960 MACOG 2019
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
FRONT PICTURE (NORTH) - Picture of the front of the building, March 2019.
REAR PICTURE (SOUTH) - Picture of the rear of the building, March 2019.
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
SIDE PICTURE (WEST) - Picture of the side of the building, March 2019.
SIDE PICTURE (EAST) - Picture of the side of the building, March 2019.
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
DETAIL PICTURE (NORTH) - Picture of a front window proposed for replacement, March 2019.
DETAIL PICTURE (NORTH) - Picture of a front window proposed for replacement, March 2019.
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
DETAIL PICTURE (INTERIOR) - Pictures provided by owner of deterioration, March 2019.
"Warped frame won't latch"
"Warped workaround"
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
DETAIL PICTURE (INTERIOR) - Pictures provided by owner of deterioration, March 2019.
"Rotted frame"
"Frame pulled away from house"
HISTORIC PRESERVATION COMMISSION
OF SOUTH BEND AND ST. JOSEPH COUNTY
Phone: 574/235.9371 Fax: 574/235.9021 Email: hpcsbsjc@southbendin.gov
DETAIL PICTURE (INTERIOR) - Pictures provided by owner of deterioration, March 2019.
"Inside moisture damage"
1
Elicia Feasel
From:John Sherry <jsherry@nd.edu>
Sent:Monday, May 6, 2019 11:04 AM
To:Elicia Feasel
Cc:Val Schey; Adam Toering
Subject:Re: window pix
Attachments:Schey-Sherry window proposal 050619 (1).doc
Hi, Elicia:
Our Friday appointment was met, and the contractor's proposal is attached
to this note.
The restoration estimate is slightly lower than the replacement cost, but is a
base bid that suggests that costs could rise as complications reveal themselves
once work is underway. The completion time for the restoration process is
FAR longer than the replacement time, and would disrupt our household for
at least 3 weeks, assuming that the work can be completed in a timely
manner. Given our work schedules, and the fact that we do much of our
work out of our home, this on-site disruption represents a considerable
burden. Further, the stress to our five dogs (and concomitant noise level)
that the prolonged project would cause seems an unreasonable
hardship. Finally, restoration could not begin until late summer or early fall,
which would deprive us of much of the seasonal benefit we hoped to derive
by replacing the windows.
Given these circumstances, we ask you to approve our request to replace
these windows so we can get the project underway.
Thanks,
John
On Mon, Apr 29, 2019 at 3:15 PM John Sherry <jsherry@nd.edu> wrote:
If May 6 is the deadline for our submission, and our Friday appointment is
met, and the evaluator is able to provide us a timely estimate, we'll hope for
2
a happy resolution. If either of the last two conditions fails, and we have no
supplementary material to submit, we hope you will honor the request made
in my last note.
On Mon, Apr 29, 2019 at 2:54 PM Elicia Feasel <efeasel@southbendin.gov> wrote:
John –
I am not sure what May 1 is in reference to but the submission deadline for the May 20 Historic Preservation
Commission meeting is May 6. Your project is second on the agenda.
Elicia
From: John Sherry <jsherry@nd.edu>
Sent: Monday, April 29, 2019 1:37 PM
To: Elicia Feasel <efeasel@southbendin.gov>
Cc: Val Schey <caresouthbend@gmail.com>
Subject: Re: window pix
Hi, Elicia:
Working from your list of window repair resources has proven to be a
frustrating exercise. 2 different service providers have assessed our
situation (which required each of us to reschedule large portions of our
workdays) and determined that they are unable to handle the scope of
repairs. Another service provider has not responded to our calls. A fourth
service provider is unable to make a house call until this coming Friday,
which is several days beyond the 1 May deadline.
3
If you are willing to extend the deadline a bit, we'll keep this appointment
and see what the estimator has to say. If not, we hope that you will accept
that we have made a good faith effort to comply, and approve our request
to replace the windows. In any event, we'd like to have an up or down
decision at your next meeting, so we can get on with improvement projects
around our house.
Thanks,
John
On Mon, Apr 1, 2019 at 12:38 PM Elicia Feasel <efeasel@southbendin.gov> wrote:
John –
Thank you for providing additional detail on the condition of the windows. A Staff Report and meeting agenda will be
distributed soon.
Elicia
From: Valerie Schey <caresouthbend@gmail.com>
Sent: Monday, April 1, 2019 10:08 AM
To: Elicia Feasel <efeasel@southbendin.gov>
Cc: John Sherry <jsherry@nd.edu>
Subject: FW: window pix
Dear Elicia,
This is a last note to round out the discussion of our prospective window replacement before your board meets on the
15th. I have attached photos from the interior of our windows.
We deeply appreciate the historic appearance of our neighborhood. We believe we can vastly improve the structure and
function of our dilapidated windows in an aesthetically harmonious way.
H.G. CHRISTMAN
CONSTRUCTION
GENERAL CONTRACTING
CARPENTRY • CONSULTING
BUILDING RESTORATION
23186 WEST IRELAND ROAD • SOUTH BEND, IN 46614 • (574) 232-9600
May 6, 2019
Valerie Schey and John Sherry
1314 East Wayne North
South Bend, IN 46615
Re: Wood Window Restoration
We propose to furnish the necessary labor, material and equipment to complete the above
referenced project.
Scope of Work – (17) Window Openings
1. Remove window sashes. Repair damaged ropes, pulleys and weights.
2. Reglaze fixed windows and sashes 100%.
3. Prep and paint windows and sashes.
4. Prep and paint (4) wood storm windows on the north elevation.
5. Remove failing caulk and re-caulk at (13) aluminum storm window frames.
6. Daily cleaning of our work area.
Base bid: $21,640.00
Clarifications
1. Working hours to be 7 AM to 5 PM. We expect to be on-site for 3 weeks.
2. Scopes of work not included: repair/painting of wood trim.
3. This proposal is valid for 30 days.
Should you have any questions or concerns, do not hesitate to contact me at any time.
Sincerely:
H. G. Christman Construction Company, LLC
Norrie Emmons
President
1
Elicia Feasel
From:Elicia Feasel
Sent:Wednesday, March 27, 2019 11:48 AM
To:'Valerie Schey'
Subject:1314 East Wayne Street COA
Attachments:1314 E. Wayne - part 2.pdf
Valerie ‐
Questions 1 ‐ 4 have been answered by Ryan and he has provided a document that shows from the inside which
windows are being replaced that correlates with the description; this is helpful to confirming that the window pane
pattern will replicate the current configuration. A site plan noting which windows would help to clarify the location of
the replacement windows.
Regarding the "grilles", in a 1994 COA, a conditional approval was made for the attic windows to be replaced with true
divided light. To remain consistent with the precedent that approval set, we will recommend the "full divided light" in
lieu of the "interior grilles" so it replicates the depth of the original true divided light.
The photographs embedded in Ryan's document can be used in the Staff Report, however, they do not show the
deteriorated conditions (I could see some glazing failure and broken ropes). Please let me know if you intend to send
additional photos to be considered in making the case for the condition of the existing windows being "deteriorated
beyond repair", per the Standards.
Thank you,
Elicia
‐‐‐‐‐Original Message‐‐‐‐‐
From: Elicia Feasel [mailto:efeasel@southbendin.gov]
Sent: Friday, March 22, 2019 4:35 PM
To: Valerie Schey <caresouthbend@gmail.com>
Cc: Adam Toering <atoering@southbendin.gov>
Subject: RE: Elicia ‐ for your review
Valerie ‐
HP Inspector, Steve, has filed a site visit report and the exterior photographs of the windows. Steve was unable to
determine the condition of the windows from the exterior, especially due to the fact that they do have storm windows.
Your photographs of the interior of the windows that you have applied to replace are vital to be able to ascertain the
condition and make a Staff Recommendation to the Commission; please see COA application, page 2, Inspection
Authority.
As for other necessary Required Documents, COA application, page 3, we will need a Site Plan or diagram that shows
which windows are proposed to be replaced. On your contract with Anderson, there is an Itemized Order Receipt that
lists and ID# and Room description; perhaps this can be mapped out.
2
Regarding Written Description and Materials to be used, the questions I have are as follows:
1. Will the new windows be Inserts or full frame?
2. Will the new windows be installed from interior or exterior? If exterior, how will exterior trim be affected?
3. Will the new windows be full divided light?
4. Many of your existing windows have an 8/1 light pattern. The windows above your front door are 6/1. Will the
pattern of the "grille style" be the same as each window being replaced? If not, which ones will be different?
You can disregard the checkbox for Blueprints.
We would need the information by April 1 to be deemed a complete application for the April 15 HPC meeting agenda.
Please let me know if you have any questions.
Thank you!
Elicia
‐‐‐‐‐Original Message‐‐‐‐‐
From: Valerie Schey <caresouthbend@gmail.com>
Sent: Tuesday, March 12, 2019 5:21 PM
To: Elicia Feasel <efeasel@southbendin.gov>
Subject: RE: Elicia ‐ for your review
Hi Elicia,
Thank you for this information.
The windows are actually a composite material and not clad windows. The material seems to be a more durable material
than the clad option.
Would you like for me to send you information about how they are made? Maybe that would be helpful for all members
of the HPC.
I will submit my COA tomorrow.
Thanks,
Val
‐‐‐‐‐Original Message‐‐‐‐‐
From: Elicia Feasel [mailto:efeasel@southbendin.gov]
Sent: Tuesday, March 12, 2019 4:55 PM
To: Valerie Schey <caresouthbend@gmail.com>
Subject: RE: Elicia ‐ for your review
Hi Valerie ‐
Thank you for contacting me again about your project and Certificate of Appropriateness application. The Commission
typically doesn't require the contract and only rarely discusses pricing of application items so we can just remove those
pages from the pdf, no problem.
When making the application, it is important to convey that the condition of the existing windows are "deteriorated
beyond repair" and that the proposed replacements "resemble the original", per the Standards. My understanding is
that the existing windows are primarily original wood with an 8/1 divided light pattern. The Standards do not prohibit
vinyl windows but it is important that I make you aware that the Commission prefers aluminum‐clad over vinyl‐clad so
they may ask if you've explored that option. They may also ask if you've received quotes to repair the existing and for
adding storm windows. It is helpful to have a response to their inquiry during the Commission meeting. As an fyi, there is
an approved COA in the file from
3
1994 approving replacement of 5 attic windows with a condition that the muntin/grid was true‐divided light.
The deadline to apply for the April 15 HPC meeting will be April 1. There are currently two COAs on the April agenda.
Thanks!
Elicia
‐‐‐‐‐Original Message‐‐‐‐‐
From: Valerie Schey <caresouthbend@gmail.com>
Sent: Tuesday, March 12, 2019 3:51 PM
To: Elicia Feasel <efeasel@southbendin.gov>
Subject: Elicia ‐ for your review
Importance: High
Elicia,
As I mentioned, John and I want to install new windows.
We have contacted Andersen, and attached is the contract they provided us for custom made windows.
Because of the private information on the contract, I DO NOT want this contract to be shared publicly with the Historic
Preservation Commission.
Before I complete the COA, can you tell me if I will be required to share our contract publically?
Thank you,
Valerie Schey
‐‐‐‐‐Original Message‐‐‐‐‐
From: Ryan Brown [mailto:rbrown@windowsbyrba.com]
Sent: Monday, March 11, 2019 4:00 PM
To: caresouthbend@gmail.com; SB868‐Admin <SB868‐Admin@windowsbyrba.com>
Cc: RBA Paperwork <RBAPaperwork@windowsbyrba.com>; Ryan Brown <rbrown@windowsbyrba.com>
Subject: Agreement Confirmation for John Sherry & Valerie Schey
Thank you for your business. It has been a privilege to assist you with your replacement project. If there is anything else I
can do for you, or if you are in need of any future service, please do not hesitate to contact me or the company using the
contact information listed in the attached agreement.
Thanks again for your purchase. I'm confident that you will love your new products for years to come.
Ryan Brown
(317)657‐6111
If you are unable to view a PDF please use the link below:
https://get.adobe.com/reader/
IMPORTANT NOTICE! This E‐Mail transmission and any accompanying attachments may contain confidential information
intended only for the use of the individual or entity named above. Any dissemination, distribution, copying or action
taken in reliance on the contents of this E‐Mail by anyone other than the intended recipient is strictly prohibited and is
not intended to, in anyway, waive privilege or confidentiality. If you have received this E‐Mail in error please
immediately delete it and notify sender at the above E‐Mail address. Please note that incoming e‐mails are not routinely
screened for response deadlines, and as such, please notify the sender separately by fax of any message containing
From:Valerie Schey
To:Elicia Feasel
Cc:John Sherry
Subject:FW: window pix
Date:Monday, April 1, 2019 10:12:56 AM
Attachments:Schey Sherry 1314 E Wayne N Window Damage - Copy.zip
Dear Elicia,
This is a last note to round out the discussion of our prospective window replacement before your
board meets on the 15th. I have attached photos from the interior of our windows.
We deeply appreciate the historic appearance of our neighborhood. We believe we can vastly improve
the structure and function of our dilapidated windows in an aesthetically harmonious way.
Just a few years ago, we invested almost $20,000.00 to repair our slate roof and install copper gutters, to
conform to the codes for the historic district. We have also upgraded to an expensive energy efficient
furnace, to be more ecologically considerate. Our current windows are so damaged and inefficient that
we suffer with cold drafts in the wintertime, and warm zones in the summertime in the vicinities of the
windows, which causes our heating and cooling costs to skyrocket in these seasons. Some of the
exterior windows are warped and rotted; they will no longer close flush to the frame. There is water
damage on some of the interior windows as well. Also, a number of windows can no longer be
raised. Finally, the existing windows are mismatched, with some of them having storms and screens,
and some of them not. We have attached photos to illustrate some of this damage.
The windows we propose to install are energy efficient, and would solve these problems while still
maintaining a historically appropriate appearance, complete with muntins. We have carefully researched
our choice of renewal vendors, and are confident that Andersen, a firm that has worked with the historic
commission in the past, will do an outstanding job of approximating our existing look. The new custom
windows align with the city’s increased emphasis on sustainability. Our contractor, Mr. Ryan Brown,
has already been in touch with you about most of these details.
Please let us know if there is any other information you would like us to provide to assist in your
deliberation. We will be present for the hearing and can address any additional questions that might
arise at that time.
Best,
John Sherry
From: John Sherry [mailto:jsherry@nd.edu]
Sent: Sunday, March 31, 2019 4:40 PM
To: Val Schey <caresouthbend@gmail.com>
Subject: window pix
Here's a zip file with the pix
--
John F. Sherry, Jr.
Herrick Professor of Marketing
Mendoza College of Business
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-1JANUARY 2017
CONTENTS — DOUBLE-HUNG WINDOWs
Double-Hung Window—General
Advantages and Applications .............................................3-2
Exploded View ...................................................................3-3
Standard Features ..............................................................3-4
Options ..............................................................................3-5
Grille Options .....................................................................3-8
Double-Hung Component Color Combination Chart ............3-11
Sloped Sill Insert Double-Hung Window ....................................3-12
Min/Max Sizes ....................................................................3-13
Limited Sash Travel and Egress Conformity .........................3-14
Clear Opening and Clear Glass Dimensions .........................3-15
Flat Sill Insert Double-Hung Window ........................................3-17
Min/Max Sizes ....................................................................3-18
Limited Sash Travel and Egress Conformity .........................3-19
Clear Opening and Clear Glass Dimensions .........................3-20
Full-Frame Double-Hung Window ..............................................3-22
Min/Max Sizes ....................................................................3-23
Limited Sash Travel and Egress Conformity .........................3-24
Clear Opening and Clear Glass Dimensions .........................3-25
Double-Hung and Related Patents .............................................3-27
3-2 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
DOUBLE-HUNG WINDOWs
ADVANTAGES AND APPLICATIONS
A double-hung window consists of two vertically sliding sash in a single frame. Both sash are counterbalanced by a spring-
powered block-and-tackle balance mounted on the side of each sash. Tilt latches for each sash allow inward tilting for easy
cleaning. Upper and lower sash are securely closed by use of a cam-type sash lock. An insect screen is installed into the
outside track.
ADVANTAGES
• Both sash can be operated for ventilation at top
and bottom of window.
• Both sash can be tilted inward for easy cleaning.
• Patented Fibrex® material is stronger than vinyl,
providing greater durability.
• Fibrex material with low-maintenance capstock
gives a rich, low-luster finish to sash and frame,
similar to painted wood.
• Smooth radius surfaces on the frame and sash
are pleasing to the eye and easier to clean.
• Mortise-and-tenon appearance on the interior
and exterior sash corners gives a traditional,
hand-crafted look.
• Full-perimeter weatherstrip provides superior
weathertightness while still allowing easy sash
operation.
• Sash are counterbalanced by a spring-powered
block-and-tackle balance mounted on the side and
matched to the weight of each individual sash.
APPLICATIONS
• Excellent choice for homes and condominiums where
traditional styling is important; appropriate for many
restoration projects.
• Suitable in areas facing walkways, decks and other
traffic areas because sash do not project outward.
• Convenient in areas where the sash need to be
cleaned from the interior.
• Visually compatible with other Renewal by Andersen®
products.
Double-Hung
Replacement Windows
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-3JANUARY 2017
EXPLODED VIEWs
DOUBLE-HUNG WINDOW
19
212014
3
4
5
7
8
9
10
12
2015
8
8
18
16
6
1
2
13
11 17
INTERIOR
EXTERIOR
22
A sloped sill insert double-
hung window is shown here, though
part usage is the same as or similar
to that of a full-frame or flat sill
insert double-hung window.
1. Frame (insert)
2. Wash assist
3. Side jamb liner
weatherstrip (upper)
4. Side jamb liner (interior
and exterior sash tracks)
5. Side cover check
rail weatherstrip
6. Balance end clip screw
7. Side jamb liner weatherstrip
(lower) with integrated fin pile
8. Tilt latch
9. Upper balance screw
10. Balance (upper sash)
11. Exterior sash interlock
(upper sash)
12. Lower balance screw
13. Balance (lower sash)
14. Bottom rail weatherstrip
15. Sash lift (optional)
16. Sash lock
17. Interior sash interlock (lower sash)
18. Sash keeper
19. Insect screen
20. Universal insect screen latch retainer
21. Insect screen latch
22. Child safety opening control device (optional)
DOUBLE-HUNG COMPONENTS
S1
S2
3-4 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
STANDARD FEATURESs
DOUBLE-HUNG WINDOW
A sloped sill insert double-hung
window corner section is shown here,
though standard features are the
same as for flat sill insert or full-
frame double-hung windows.
High-Performance™ Low-E4™ GlassRegular Glass
Described below are features that contribute to the double-hung window’s low
maintenance, energy efficiency, ease of operation, and
pleasing appearance.
• Frame – Made of rigid Fibrex® material a unique structural
composite of wood fibers and a special thermoplastic
polymer. Developed by Andersen®, Fibrex material
combines the strength and stability of wood with the
low-maintenance features of our time-tested
Perma-Shield® cladding.
• Sash – Constructed of Fibrex material. Corner
keys provide durable, watertight corners.
The mortise and tenon joinery complements
the frame. A high-performance silicone sealant
provides a watertight seal between the glass
and sash.
• Glazing – High-PerformanceTM LoE4®*
glass with an inert, energy-efficient
gas, is standard for every window. See
Options on page 3-6 for other glass choices.
*LoE4 is a registered trademark of Cardinal IG Company.
• Glass spacer – The patented low-conductivity spacer is made of stainless
steel and resists heat transfer four to five times better than aluminum
spacers used by many other manufacturers.
• Low-maintenance exterior coating – A highly durable microscopic coating
of titanium dioxide (TiO2) is applied to the exterior glass surface during
the glass manufacturing process. High-Performance Low-E4TM glass is self-
activating by exposure to sunlight. When activated by sunlight, it loosens
dirt, dust and organic material which are then washed away by rain. The
glass dries faster and reduces water spotting by up to 99%.
(See photo on this page.)
The unique exterior coating works similarly to a rechargeable battery.
Once the coating is activated or “charged,” it will hold its activation for
some time. The more sunlight it receives, the better the activation. When
re-exposed to sunlight, the coating will recharge after periods of lower
sunlight levels.
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-5JANUARY 2017
STANDARD FEATURES, cont.s
DOUBLE-HUNG WINDOW
• Removable protective film – Packaging features a clear protective film that is
factory applied to both the interior and exterior glass surfaces to help protect
the glass from shipping and installation damage.
• Weatherstrip – A dual system of a foam-filled bulb applied to the sash frame
and a constant-force low-friction weatherstrip applied to the frame provide a
tight seal.
• Sash Lock and Keeper – The zinc die cast dual cam-type sash lock, mounted at
center of the meeting rail on the interior sash, engages easily into the keeper
mounted on the center of the meeting rail on the exterior sash. The Double-
hung Window Component Color Combination Chart on page 3-11 shows the
hardware color for each window color combination.
Fibrex material
interior sash
Stainable wood
interior sash
OPTIONSs
DOUBLE-HUNG WINDOW
The following options are available for all Renewal by Andersen® double-hung
windows:
• Dual-Colors and Stainable Wood Interior Veneers – Dual-color windows
are available that have different interior and exterior colors. Stainable wood
interior veneers are also available in oak, maple, and engineered pine. The Double-
Hung Window Component Color Combination Chart on page 3-11 shows available
color combinations and the default color of individual components for these
combinations. Alternative component (e.g., insect screens, grilles, hardware, side
jambs) color combinations are available upon request.
Painting and staining guidelines for Fibrex ® material and stainable wood
interiors are available in this manual, the Product Installation Manual and in
the Care and Maintenance Guide.
• Traditional Square Check Rail – Optional square-shaped check rail available
in oak, maple, engineered pine veneer and Fibrex material interior finishes
offers a classic flat surface appearance. These classic lines create the old world
look, using the advanced technology of today. This option can be used with
any other double-hung lock components or grille accessories.
• Rounded Contemporary Check Rail – Original rounded contemporary
check rail is still available (as an option) in same color and wood species.
• TruScene® Insect Screen – Micro-fine stainless steel mesh (25 x 25 per inch mesh)
that provides over 50% more clarity than standard Andersen insect screens.
Keeper Lock
Traditional Fibrex Material
Square Check Rail
3-6 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
• Aluminum Insect Screen Cloth – Durable aluminum screen cloth (18 x 16 per
inch mesh) in a glare-resistant charcoal gray.
• Half Insect Screen – A half insect screen is available that only covers the lower
sash. The half screen does not impede the operation of the upper sash.
• Decorative Glass Patterns – Standard windows have no textured glass pattern
whatsoever. Optional textured patterns are as follows:
• Obscure (not available on double-hung windows taller than 86")
• Reed
• Cascade
• Fern (not available on double-hung windows wider than 50-5/16")
• Glass Coating – High-Performance™ Low-E4™ coating is standard with all
windows. Optional glazings are as follows:
• Clear (no coating)
• SmartSun™
• High-Performance Low-E4 Smart Sun™ tinted coating
• High Performance® Low-E4 Smart Sun™ with Heatlock™
* High Performance® Low-E4 Smart Sun™ with Heatlock™ not available with decorative glass patterns
• Tempered Glass – Tempering is an option for all available glass options.
Untempered glass is standard.
OPTIONS, cont.s
DOUBLE-HUNG WINDOW
Double-Hung
Window
Full
Insect Screen All sash ratios
Restrictions
All heights available for unit widths less than or equal to 50-1/4".
All widths available for unit heights less than or equal to 48-5/8".
90
100
20 30 40 50 60
30
40
50
60
70
80
10 20
HEIGHT
WIDTH
TruSceneTM Not Available for these sizes
DB TRUSCENE®
FULL INSECT
SCREEN:
ALL SASH
RATIOS
AVAILABLE SIZES
96" MAX
27-3/4"
16-1/2" MIN 54"
50-1/4"
70"
48-5/8"
70"
48-5/8"
50-1/4"
Double-Hung
Window Half Insect Screen All sash ratios All sizes available, no restrictions
NOTE:
Equal Sash Ratio
DB min/max chart
shown here; screen
dimensions apply to
all sash ratios.
Glass Options
High Performance® Low-E4 Smart Sun™ with Heatlock™ (no pattern)
High Performance® Low-E4 Smart Sun™ tinted
High Performance® Low-E4 Smart Sun™
(no pattern)
High Performance® Low-E4 (no pattern)
Obscure
Reed
Cascade
Fern
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-7JANUARY 2017
OPTIONS, cont.s
DOUBLE-HUNG WINDOW
Sash hand lift
Estate™
hand lift
Estate
finger lifts
(see notice above)
Estate
keeper
Estate
lock
• Glass Breather Tubes – Breather tubes are available for glass intended for
high-altitude installations. It is important to note that breather tubes will
decrease the thermal performance of the unit. Refer to the Technical Data
(Section 8) in this Spec and Tech Manual for altitude specifics.
• Sash Lock – A single zinc-cast metal lock is available in White, Stone and
Canvas colors. Units narrower than 22-13/16" have a single lock. For units
22-13/16" wide or wider, a second lock is available as an option. For units
wider than 45-9/16", a second lock is required.
• Sash Lift – One or two sash lifts may be mounted to the bottom rail of the
lower sash. Can be specified, available in White, Stone, or Canvas colors or
Estate™ finishes.
• Estate™ Finish Hardware – Estate finish hardware is available for all
operating windows and is available in high performance bright brass,
antique brass, high performance satin nickle, distressed nickel, brushed
chrome, polished chrome, distressed bronze, oil-rubbed bronze and dark
bronze. Hardware in each of the finishes is electroplated and/or modified
to obtain the desired look. The Estate hardware components for double-
hung windows are listed below:
• Lock and Keeper – The zinc cast, plated lock and keeper provide
elegant Estate styling that beautifully complements not only the
window, but matches any Estate hardware found on Andersen® patio
doors.
• Hand Lift – Similar to the standard lift, the Estate hand lift provides an
easy gripping surface with which to operate the window.
• Finger Lifts – These smaller, more traditional looking lifts provide a
different aesthetic option for a grasp to operate the window. These lifts
are typically used in pairs.
• Opening Control Device – Field-applied device restricts sash opening
to 4 inches. This device will allow full sash opening when disengaged
and will re-engage when sash is closed.
Keeper
Lock
Painted Metal
Hardware
When finger lifts
are desired, order the window
with no lifts. Finger lifts are then
installed in the field after the
window installation.
Opening
control device
Reed* 56-7/8” 100-7/8”
Cascade* 56-7/8” 84-7/8”
Fern 56-7/8” 84-7/8”
Obscure 56-7/8” 84-7/8”
* Pattern is directional
on windows or windows Pattern wider than taller than
Unavailable Glass Patterns
3-8 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
OPTIONS, cont.s
DOUBLE-HUNG WINDOW
3/4" wide 1-1/8" wide
EXT.
INT.
EXT.
INT.
Full Divided Light (FDL) Grille
FDL grilles provide the classic
look of a true divided light
window. The high-definition
exterior grille is made from
Fibrex® material and is available
in two different widths. Between
the glass panes, an aluminum
spacer stands slightly away from
each pane to maintain thermal
performance. The high-definition interior
wood grille is available in hardwood, maple or
oak and in two different widths, and may be
permanently applied or removable.
Available Grille Types
Three grille types are available. The interior and exterior sides of the grilles are color-
coordinated with each side of the window frame. Consult the color combination
charts in each window product section for detailed color information.
Grille-Between-the-Glass (GBG)
Sculpted aluminum grille members are
manufactured between the glass panes,
and are available in two widths. Enamel
finish replicates interior and exterior
face of window. If wood interior,
interior facing surface will be gray.
3/4” wide 1" wide
EXT.
INT.
EXT.
INT.GBG
(2 widths)
Interior Wood Grille (INTW)
With the option of hardwood
maple or oak, these grilles snap
into clips placed around the
interior side of the sash and may
be removed to clean the glass.
These high-definition interior
wood grilles are available in two
different widths.
INTW
High-Definition
(2 widths)
Interior wood
grille clip
Interior wood grille
(INTW)
Full divided
light (FDL)
Grille-between-
the-glass (GBG)
1-1/8" wide
1-1/8" wide
EXT.
INT.
FDL
High-Definition
(2 widths)
3/4" wide
3/4" wide
EXT.
INT.
Standard Wide
Standard Wide
Standard Wide
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-9JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
OPTIONS, cont.s
DOUBLE-HUNG WINDOW
4”
4”
4”
4”
PRAIRIE
Regardless of sash size, all
prairie grilles intersect to form
4" squares of visible glass in the
corners of the sash. Prairie grilles
are available on one or both sash.
The prairie grille pattern is
not available on double-hung
windows narrower than 20˝.
• Available Grille Patterns – Grille pattern options
include colonial, prairie, and modified prairie.
4”
4”
MODIFIED PRAIRIE
Regardless of sash size, all modified
prairie grilles intersect to form 4"
squares of visible glass. Modified
prairie grilles are available for one
or both sash.
The modified prairie grille pattern
is not available on double-hung
windows narrower than 20".
COLONIAL
Refer to colonial pattern grilles
by pattern name and “grille lites
wide by grille lites high” for each
sash. For the examples shown,
the left window would be
“colonial pattern, 3 by 2, upper
and lower sash”. For the example
to the right, “colonial pattern, 3
by 1 on the upper sash, no grille
on the lower sash”.
3-10 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
OPTIONS, cont.s
DOUBLE-HUNG WINDOW
• Exterior brick mould – Fibrex® material brick mould is available in two
configurations, picture frame and traditional style, as an exterior trim option for
full-frame windows. Brick mould is available on insert frame windows in picture
frame style only.
FULL-FRAME BRICK MOULD
Full-frame brick mould is available in
two configurations:
• Picture Frame Style – The same
brick mould profile is used all the
way around the window.
• Traditional Style – A thinner sill
profile that runs completely under
the side brick mould pieces is used
reminiscent of old, traditional
window installations.
Sill1 5/16”3 1/16”
1 1/2”
2 1/4”
PICTURE FRAME STYLE
(one continuous profile)
Head
Sill
1 3/8”3 11/16”
1 1/2”2 1/4”
1 7/16”3 11/16”
5/8”1 5/8”
1/4”7/8”
TRADITIONAL STYLE
FULL FRAME BRICK MOULD
(smaller sill profile)
• Overfit brick mould – Fibrex material is available as an exterior trim option for
insert flat sill only windows in picture frame style.
INSERT-FRAME BRICK MOULD
• Overfit Brick Mould – Fibrex
material overfit brick mould is
available as an exterior trim option
for insert (flat sill only) window in
picture frame style.
• Overfit Flange
• Chamfered Overfit Flange
CHAMFERED
EDGE
OVERFIT
FLANGE
OVERFIT
BRICK
MOULD
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-11JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
WINDOW COMPONENT COLOR COMBINATION CHART
DOUBLE-HUNG WINDOW
Interior Sash Track
Interior Weatherstrip
Exterior Weatherstrip
Exterior Sash Track
INTERIOR EXTERIOR
Side jamb weatherstrip / sash tracks
Double-Hung Window Component Color Combination Chart
Exterior
White
Canvas
SandtoneTerratone
Dark Bronze
Canvas
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red RockWhite
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red Rock
White
CanvasSandtone
Terratone
Cocoa Bean
Dark BronzeForest Green
Black
Red Rock
Exterior
White
Canvas
SandtoneTerratone
Dark Bronze
Canvas
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red RockWhite
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red Rock
White
CanvasSandtone
Terratone
Cocoa Bean
Dark BronzeForest Green
Black
Red Rock
Exterior
White
Canvas
SandtoneTerratone
Dark Bronze
Canvas
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red RockWhite
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red Rock
White
CanvasSandtone
Terratone
Cocoa Bean
Dark BronzeForest Green
Black
Red Rock
Interior
White
Canvas
SandtoneTerratone|
Dark Bronze
White
Canvas
Wood**
Lower Exterior
White/White
White/White
Gray/GrayGray/Gray
Gray/Gray
White/White
Gray/Gray
White/White
Gray/GrayGray/Gray
Gray/Gray
Gray/Gray
Gray/GrayWhite/White
White/White
White/WhiteGray/Gray
Upper Interior
White/White
White/White
Gray/GrayGray/Gray
Gray/Gray
White/White
Gray/White
Gray/WhiteWhite/White
Gray/White
Wood/White
Wood/WhiteWood/Gray
Interior
White
Canvas
SandtoneTerratone
Dark Bronze
White
Canvas
Wood*
Interior Exterior InteriorHardwareInsect Screen Frame
White
Canvas
SandtoneTerratone
Dark Bronze
Canvas
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red RockWhite
Sandtone
Terratone
Cocoa BeanDark Bronze
Forest Green
Black
Red Rock
White
CanvasSandtone
Terratone
Cocoa Bean
Dark BronzeForest Green
Black
Red Rock
White
Canvas
StoneStone
Dark Bronze
White
Canvas
Stone
White
Canvas
SandtoneTerratone
Dark Bronze
White
Canvas
Sandtone
White
White
GrayGray
Gray
White
Canvas
Canvas
Canvas
WhiteWhite
White
White
Gray
White
White
GrayGray
Gray
White
White
Wood
Window Color Components Grille Between Glass Interior Wood
& Full Divided Light Headliner Side Jamb Components
Alternative component and grille color combinations for each frame/sash color are available upon request
* Wood interiors available in: pine, maple and oak** Pine and maple interiors will use maple species interior grilles. Oak interiors will use oak species interior grillesSingle ColorDual ColorStainable Wood InteriorsGray/Gray
3-12 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
SLOPED-SILL INSERT DOUBLE-HUNG WINDOW
When the old window frame is solid and/or interior or exterior trim needs to
be saved, an insert window installation is appropriate. These installations are
also typically less disruptive to the home. A typical installation requires removing
the old sash and any interfering hardware or trim from the existing window
frame.
The insert frame has an exterior trim kerf to facilitate the use of exterior trim
or aluminum coil stock. The 14° sill angle and 3-3/16" frame width fit within
the 3-1/4" pocket that many old window frames have.
Sloped sill
14º
slope
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-13JANUARY 2017
20 30 40 50 60
COTTAGE STYLE (2:4)
REVERSE COTTAGEL STYLE (4:2)
OR
EQUAL SASH RATIO (1:1)
COTTAGE STYLE (2:3)
REVERSE COTTAGE STYLE (3:2)
OR
16-1/2 " mi n 48" ma x
27-3/4 " min
96" max
90
100
48" ma x
80
32-7/8 " mi n
81-1/4 " ma x
16-1/2 " mi n
60
70
10 30
HEIGHT
40
50
38" mi n
54" Extended max W
16-1/2 " mi n 48" ma x
73-3/4 " max
HEIGHT
20 30 40 50
80
60
70
10 30
40
50
54" Extended max W
54" Extended max W
Sloped Sill Insert
AVA ILABLE SIZES EXTENDED WIDTHS 20 30 40 50 60
30
40
50
60
70
80
10 20
HEIGHT
WIDTH
Sloped Sill Insert
AVA ILABLE SIZES EXTENDED WIDTHS WIDTH
Sloped Sill Insert
AVA ILABLE SIZES EXTENDE D WIDTHS 55-3/8 " max H
for any extended widths
WIDTH
60-7/8 " max H
for any extended widths
72" max H
for any extended widths
Custom check rail heights may be
specified to achieve different visible sash
ratios, via NSPR.
Do not confuse sash ratio and
colonial grille pattern designations.
Sash ratio refers to the size relationship
between upper and lower sash. Grille
pattern refers to the number of lites in a
colonial pattern grille.
MIN / MAX SIZES
MIN / MAX SIZESs
DOUBLE-HUNG WINDOW | SLOPED SILL INSERT
Certain window sizes may have
limited sash travel. Refer to the
charts on the following page, or
call a customer service associate, or
see the RbA Extranet for detailed
information on limited sash travel
and egress conformity in specific
window applications.
* Two locks required on
units greater than or
equal to 45-9/16"
** Two locks not
available on units
narrower than 22-13/16"
*** A second lock is
available as an
option for units
greater than 22-13/16"
3-14 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
LIMITED SASH TRAVEL AND EGRESS CONFORMITY
DOUBLE-HUNG WINDOW | SLOPED SILL INSERT
Use the charts in the left
column to determine if unit
will have limited sash travel
(lower sash only).
EQUAL (1:1)
Sash Ratio
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CONFORMITY IMPACT
DOES NOT affect
Egress Conformity
EQUAL (1:1)
Sash Ratio
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT DOES affect
Egress Conformity
EGRESS CODE IMPACT
DOES NOT affect
Egress Conformity
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CODE IMPACT
DOES NOT affect
Egress Conformity
2:3 or 3:2 Sash RatioCOTTAGE or REVERSE
COTTAGE
2:3 or 3:2 Sash Ratio
COTTAGE or REVERSE
COTTAGE
2:4 or 4:2 Sash Ratio
COTTAGE or REVERSE
COTTAGE
2:4 or 4:2 Sash Ratio
COTTAGE or REVERSE COTTAGE
Egress vs. Unit SizeRbA DB Sloped Sill, Colonial Grille (3/4'' profile), 2:4 Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Egress vs. Unit SizeRbA DB Sloped Sill, Colonial Grille (3/4'' profile), 2:3 Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Egress vs. Unit SizeRbA DB Flat Sill, Colonial Grille (3/4'' profile), Even Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
Sash Travel vs. Unit SizeRbA DB Sloped Sill, Colonial Grille (3/4'' profile), 2:4 Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Sloped Sill, Colonial Grille (3/4'' profile), 2:3 Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Sloped Sill, Colonial Grille (3/4'' profile), Even Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
LIMITED
SASH TRAVEL
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
WIDTHHEIGHT WIDTHHEIGHT
WIDTHHEIGHT WIDTHHEIGHT
WIDTHHEIGHT WIDTHHEIGHTLIMITED
SASH TRAVEL
LIMITED
SASH TRAVEL
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-15JANUARY 2017
To determine the clear opening dimensions or clear glass size of either sash,
follow the steps below.
1. Determine Unit Width (W) and Unit Height (H).
2. Determine the appropriate Check Rail Height (CRH):
3. Using the Check Rail Height (CRH) found in Step 2,
calculate Clear Opening and/or Clear Glass dimensions:
ILLUSTRATIONS on next page
SEE
Check Rail Height =( Height ) + 0.1613
Sloped Sill Double-Hung Check Rail Height (CRH)
( Height x 2 ) – 0.255Check Rail Height =
( Height x 3 ) – 1.55Check Rail Height =
Check Rail Height =( Height x 2 ) – 1.94 3
Check Rail Height = ( Height ) – 0.8742
EQUAL (1:1)
Sash Ratio
COTTAGE (2:3)
Sash Ratio
COTTAGE (2:4)
Sash Ratio
REVERSE
COTTAGE (3:2)
Sash Ratio
REVERSE
COTTAGE (4:2)
Sash Ratio
= Check Rail Height – 2.875
= Width – 3.188
Determining Clear Opening Dimensions
(to assess egress code compliance)
Clear Opening Width x Clear Opening Height
144
=
CLEAR OPENING
WIDTH (inches)
CLEAR OPENING
HEIGHT (inches)
CLEAR OPENING
AREA (ft2)
Width – 6.0
Determining Clear Glass Dimensions
=
Check Rail Height – 3.188=
Height – Check Rail Height – 4.938=
CLEAR GLASS WIDTH
(inches)
CLEAR GLASS HEIGHT
(Upper sash, inches)
CLEAR GLASS HEIGHT
(Lower sash, inches)
CLEAR OPENING AND CLEAR GLASS DIMENSIONS
DOUBLE-HUNG WINDOW | SLOPED SILL INSERT
EQUAL (1:1)
Sash Ratio
COTTAGE (2:3 or 2:4)
Sash Ratio
REVERSE COTTAGE
(3:2 or 4:2) Sash Ratio
}
= Height – Check Rail Height – 2.75
Custom check rail heights are available
upon request.
For most areas, egress opening codes
dictate minimum clear opening width,
height, and square feet. Check with
your local code officials to determine the
precise egress codes for each home.
Clear Opening Widths are often called
“Egress Opening” Dimensions.
For detailed information on limited sash
travel and egress conformity in specific
window applications, refer to the charts
on the previous page, or call a customer
service associate, or see the RbA Extranet.
3-16 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
CLEAR OPENING AND CLEAR GLASS DIMENSIONS, cont.
DOUBLE-HUNG WINDOW | SLOPED SILL INSERT
Window profiles shown
for measurement purposes.
Head
Unit Height3 3/16"
13/16"
1/2"11/2"15/32"
3 1/16"Check Rail HeightSill
4"
3 29/32"
13/8"Clear Glass Height (lower sash)Check RailClear Glass Height (upper sash)2 1/32"
Jamb
Unit Width
15/32"
13/16"
1/2"
3 3/16"
4"
3"Clear Opening HeightHead
Check
Rail
Sill
InteriorExterior
InteriorExterior
Jamb
63/64"
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-17JANUARY 2017
FLAT SILL INSERT DOUBLE-HUNG WINDOW
The flat sill insert double-hung window frame option is recommended when
replacing existing windows that have a sill angle less than 8 degrees, when
specifying an insert window frame that needs to have a flat sill to seat correctly
in the opening, or when mulling multiple double-hung insert windows in an
opening. It is also the window used in angle bay frames. The 3-3/16" frame
width is also consistent with other insert windows to fit in a 3-3/4" pocket.
Existing window pockets must be flat. If they are not, materials must be added
so that the pocket offers full support of the window frame.
As with other flat sill insert windows, the flat sill design of the insert frame
double-hung window features an exterior trim kerf on all four sides of the
frame, allowing for exterior Fibrex® material trim or aluminum coil stock to
return to the window frame. This also facilitates mulling to other flat sill insert
windows.
For measuring information, please see the Technical Measurement Manual.
For installation methods, please see the Product Installation Manual.
3-18 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
20 30 40 50 60
COTTAGE STYLE (2:4)
REVERSE COTTAGE STYLE (4:2)
OR
EQUAL SASH RATIO (1:1)
COTTAGE STYLE (2:3)
REVERSE COTTAGE STYLE (3:2)
OR
16-1/2 " min 48" max
27-3/4 " min
96" max
90
100
48" max
80
32-7/8 " min
81-1/4 " max
16-1/2 " min
60
70
1030
HEIGHT
40
50
38" min
54" Extended max W
16-1/2 " min 48" max
73-3/4 "max
HEIGHT
20 30 40 50
80
60
70
1030
40
50
54" Extended max W
54" Extended max W
Flat Sill Insert
AVAILABLE SIZES EXTENDED WIDTHS20 30 40 50 60
30
40
50
60
70
80
1020
HEIGHT
WIDTH
Flat Sill Insert
AVAILABLE SIZES EXTENDED WIDTHSWIDTH
Flat Sill Insert
AVAILABLE SIZES
EXTENDEDWIDTHS55-3/8 " max H
for any extended widths
WIDTH
60-7/8 " max H
for any extended widths
72" max H
for any extended widths
MIN / MAX SIZES
MIN/MAX SIZES
DOUBLE-HUNG WINDOW | FLAT SILL INSERT
Custom check rail heights can
be specified to achieve different
visible sash ratios. Contact the
factory to confirm availability and
ordering procedure.
Do not confuse sash ratio
and colonial grille pattern
designations. Sash ratio refers
to the size relationship between
upper and lower sash. Grille
pattern refers to the number of
lites in a colonial pattern grille.
Certain window sizes may have
limited sash travel. Refer to the
charts on the following page, or
call a customer service associate, or
see the RbA Extranet for detailed
information on limited sash travel
and egress conformity in specific
window applications.
* Two locks required on
units greater than or
equal to 45-9/16"
*** A second lock is
available as an
option for units
greater than 22-13/16"
** Two locks not
available on units
narrower than 22-13/16"
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-19JANUARY 2017
Use the charts in the left
column to determine if unit
will have limited sash travel
(lower sash only).
EQUAL (1:1)
Sash Ratio
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CONFORMITY IMPACT
DOES NOT affect
Egress Conformity
EQUAL (1:1)
Sash Ratio
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CODE IMPACT
DOES NOT affect
Egress Conformity
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CODE IMPACT
DOES NOT affect
Egress Conformity
2:3 or 3:2 Sash RatioCOTTAGE or REVERSE
COTTAGE
2:3 or 3:2 Sash Ratio
COTTAGE or REVERSE
COTTAGE
2:4 or 4:2 Sash Ratio
COTTAGE or REVERSE
COTTAGE
2:4 or 4:2 Sash Ratio
COTTAGE or REVERSE COTTAGE
Egress vs. Unit SizeRbA DB Flat Sill, Colonial Grille (3/4'' profile), 2:4 Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Egress vs. Unit SizeRbA DB Flat Sill, Colonial Grille (3/4'' profile), 2:3 Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Egress vs. Unit SizeRbA DB Flat Sill, Colonial Grille (3/4'' profile), Even Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Flat Sill, Colonial Grille (3/4'' profile), Even Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Flat Sill, Colonial Grille (3/4'' profile), 2:4 Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit Size
RbA DB Full Frame, Colonial Grille (3/4'' profile), 2:3 Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
LIMITED SASH TRAVEL AND EGRESS CONFORMITY
DOUBLE-HUNG WINDOW | FLAT SILL INSERT
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
LIMITED
SASH TRAVEL
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
WIDTHHEIGHT WIDTHHEIGHT
WIDTHHEIGHT WIDTHHEIGHT
WIDTHHEIGHT WIDTHHEIGHTLIMITED
SASH TRAVEL
LIMITED
SASH TRAVEL
3-20 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
3. Using the Check Rail Height (CRH) found in Step 2,
calculate Clear Opening and/or Clear Glass dimensions:
= Check Rail Height – 2.875
= Width – 3.188
Determining Clear Opening Dimensions
(to assess egress code compliance)
Clear Opening Width x Clear Opening Height
144
=
CLEAR OPENING
WIDTH (inches)
CLEAR OPENING
HEIGHT (inches)
CLEAR OPENING
AREA (ft2)
Width – 6.0
Determining Clear Glass Dimensions
=
Check Rail Height – 3.188=
Height – Check Rail Height – 6.521=
CLEAR GLASS WIDTH
(inches)
CLEAR GLASS HEIGHT
(Upper sash, inches)
CLEAR GLASS HEIGHT
(Lower sash, inches)
EQUAL (1:1)
Sash Ratio
COTTAGE (2:3 or 2:4)
Sash Ratio
REVERSE COTTAGE
(3:2 or 4:2) Sash Ratio
}
= Height – Check Rail Height – 4.375
CLEAR OPENING AND CLEAR GLASS DIMENSIONS
DOUBLE-HUNG WINDOW | FLAT SILL INSERT
To determine the clear opening dimensions or clear glass size of either sash,
follow the steps below.
1. Determine Unit Width (W) and Unit Height (H).
2. Determine the appropriate Check Rail Height (CRH):
Custom check rail heights are available
upon request.
For most areas, egress opening codes
dictate minimum clear opening width,
height, and square feet. Check with
your local code officials to determine the
precise egress codes for each home.
Clear Opening Widths are often called
“Egress Opening” Dimensions.
For detailed information on limited sash
travel and egress conformity in specific
window applications, refer to the charts
on the previous page, or call a customer
service associate, or see the RbA Extranet.
ILLUSTRATIONS on next page
SEE
Check Rail Height =( Height ) – .3653
Flat Sill Insert Double-Hung Check Rail Height (CRH)
( Height x 2 ) – 0.8785Check Rail Height =
( Height x 3 ) – 2.4495Check Rail Height =
Check Rail Height =( Height x 2 ) – 2.992 3
Check Rail Height = ( Height ) – 1.6632
EQUAL (1:1)
Sash Ratio
COTTAGE (2:3)
Sash Ratio
COTTAGE (2:4)
Sash Ratio
REVERSE
COTTAGE (3:2)
Sash Ratio
REVERSE
COTTAGE (4:2)
Sash Ratio
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-21JANUARY 2017
Interior
Exterior
Clear Opening HeightInterior
Exterior
Head
Check
Rail
Sill
Head
3-3/16"
1-5/32”
3-1/16”Check Rail HeightSill
4-1/2”Clear Glass Height (lower sash)2-1/32”
1-13/32”Unit HeightCheck Rail
4"
Interior Jamb
Exterior
Unit Width
1-5/32”
3-3/16”
4"
3"
Clear Opening Width
Clear Glass Width
Jamb
2-19/32”
1/2”
1/2”
13/16”
9/16”
CLEAR OPENING AND CLEAR GLASS DIMENSIONS, cont.
DOUBLE-HUNG WINDOW | FLAT SILL INSERT
Window profiles shown
for measurement purposes.
3-22 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
FULL-FRAME DOUBLE-HUNG WINDOWs
The full-frame double-hung window is a complete window that includes a full
frame and sash. It works well in replacement situations where the old window
frame is deteriorated beyond repair or when the existing window frame doesn’t
allow for a double-hung insert window to be installed, such as old wood
casement or metal frames. Frame will also accomodate exterior and interior trim
options. See page 3-10.
Extension jamb kerf
Brickmouldreceptor
Gusset plate andinstallation flange legs
EXTERIOR
INTERIOR
4-5/
8" WidthIntregal insect screen channel
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-23JANUARY 2017
20 30 40 50 60
COTTAGE STYLE (2:4)
REVERSE COTTAGE STYLE (4:2)
OR
EQUAL SASH RATIO (1:1)
COTTAGE STYLE (2:3)
REVERSE COTTAGE STYLE (3:2)
OR
17" mi n 48" ma x
27-3/4 " mi n
96" max
90
100
48" ma x
80
32-7/8 " mi n
81-1/4 " ma x
17" mi n
60
70
10 30
HEIGHT
40
50
38" mi n
54" Extended max W
17" mi n 48" ma x
73-3/4 "max
HEIGHT
20 30 40 50
80
60
70
10 30
40
50
54" Extended max W
54" Extended max W
Full Fram e
AVA ILABLE SIZES EXTENDED WIDTHS 20 30 40 50 60
30
40
50
60
70
80
10 20
HEIGHT
WIDTH
Full Fram e
AVA ILABLE SIZES EXTENDED WIDTHS WIDTH
Full Fram e
AVA ILABLE SIZES EXTENDE D WIDTHS 55-3/8 " max H
for any extended widths
WIDTH
60-7/8 " max H
for any extended widths
72" max H
for any extended widths
MIN / MAX SIZES
Custom check rail heights
can be specified to achieve
different visible sash ratios.
Contact the factory to confirm
availability and ordering
procedure.
Do not confuse sash ratio
and colonial grille pattern
designations. Sash ratio refers
to the size relationship between
upper and lower sash. Grille
pattern refers to the number of
lites in a colonial pattern grille.
MIN / MAX SIZESs
DOUBLE-HUNG WINDOW | FULL FRAME
Certain window sizes may have
limited sash travel. Refer to the
charts on the following page, or
call a customer service associate, or
see the RbA Extranet for detailed
information on limited sash travel
and egress conformity in specific
window applications.
* Two locks required on
units greater than or
equal to 45-9/16"
*** A second lock is
available as an
option for units
greater than 22-13/16"
** Two locks not
available on units
narrower than 22-13/16"
3-24 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
Use the charts in the left
column to determine if unit
will have limited sash travel
(lower sash only).
EQUAL (1:1)
Sash Ratio
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CONFORMITY IMPACT
DOES NOT affect
Egress Conformity
EQUAL (1:1)
Sash Ratio
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT DOES affect
Egress Conformity
EGRESS CODE IMPACT
DOES NOT affect
Egress Conformity
Full Sash Travel
50-100% Travel
less than 50% Travel
SASH TRAVEL IMPACT
DOES affect
Egress Conformity
EGRESS CODE IMPACT
DOES NOT affect
Egress Conformity
2:3 or 3:2 Sash RatioCOTTAGE or REVERSE
COTTAGE
2:3 or 3:2 Sash Ratio
COTTAGE or REVERSE
COTTAGE
2:4 or 4:2 Sash Ratio
COTTAGE or REVERSE
COTTAGE
2:4 or 4:2 Sash Ratio
COTTAGE or REVERSE COTTAGE
Egress vs. Unit SizeRbA DB Full Frame, Colonial Grille (3/4'' profile), 2:4 Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Egress vs. Unit SizeRbA DB Full Frame, Colonial Grille (3/4'' profile), 2:3 Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Egress vs. Unit SizeRbA DB Full Frame, Colonial Grille (3/4'' profile), Even Sash
No
Yes
Egress Chart
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Full Frame, Colonial Grille (3/4'' profile), 2:4 Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Full Frame, Colonial Grille (3/4'' profile), 2:3 Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
Sash Travel vs. Unit SizeRbA DB Full Frame, Colonial Grille (3/4'' profile), Even Sash
0 to 50 %
Travel Chart
50 to 100%
Full Travel
ActiveReports Evaluation. Copyright 2002-2003 (c) Data Dynamics, Ltd. All Rights Reserved.
16 20 24 28 32 36 40 44 48 52
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
LIMITED SASH TRAVEL AND EGRESS CONFORMITY
DOUBLE-HUNG WINDOW | FULL FRAME
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
LIMITED
SASH TRAVEL
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
60
68
72
76
80
84
88
92
96
16 20 24 28 32 36 40 44 48 5224
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
EGRESS CODE IMPACT
WIDTHHEIGHT WIDTHHEIGHT
WIDTHHEIGHT WIDTHHEIGHT
WIDTHHEIGHT WIDTHHEIGHTLIMITED
SASH TRAVEL
LIMITED
SASH TRAVEL
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-25JANUARY 2017
To determine the clear opening dimensions or clear glass size of either sash,
follow the steps below.
1. Determine Unit Width (W) and Unit Height (H).
2. Determine the appropriate Check Rail Height (CRH):
Custom check rail heights are available
upon request.
For most areas, egress opening codes
dictate minimum clear opening width,
height, and square feet. Check with
your local code officials to determine the
precise egress codes for each home.
Clear Opening Widths are often called
“Egress Opening” Dimensions.
For detailed information on limited sash
travel and egress conformity in specific
window applications, refer to the charts
on the previous page, or call a customer
service associate, or see the RbA Extranet.
ILLUSTRATIONS on next page
SEE
Check Rail Height =( Height ) – .2763
Full Frame Double-Hung Check Rail Height (CRH)
( Height x 2 ) – 0.7765Check Rail Height =
( Height x 3 ) – 2.2955Check Rail Height =
Check Rail Height =( Height x 2 ) – 2.815 3
Check Rail Height = ( Height ) – 1.5362
EQUAL (1:1)
Sash Ratio
COTTAGE (2:3)
Sash Ratio
COTTAGE (2:4)
Sash Ratio
REVERSE
COTTAGE (3:2)
Sash Ratio
REVERSE
COTTAGE (4:2)
Sash Ratio
3. Using the Check Rail Height (CRH) found in Step 2,
calculate Clear Opening and/or Clear Glass dimensions:
= Check Rail Height – 2.875
= Width – 3.188
Determining Clear Opening Dimensions
(to assess egress code compliance)
Clear Opening Width x Clear Opening Height
144
=
CLEAR OPENING
WIDTH (inches)
CLEAR OPENING
HEIGHT (inches)
CLEAR OPENING
AREA (ft2)
Width – 6.0
Determining Clear Glass Dimensions
=
Check Rail Height – 3.188=
Height – Check Rail Height – 6.266=
CLEAR GLASS WIDTH
(inches)
CLEAR GLASS HEIGHT
(Upper sash, inches)
CLEAR GLASS HEIGHT
(Lower sash, inches)
EQUAL (1:1)
Sash Ratio
COTTAGE (2:3 or 2:4)
Sash Ratio
REVERSE COTTAGE (3:2
or 4:2) Sash Ratio
}
= Height – Check Rail Height – 4.125
CLEAR OPENING AND CLEAR GLASS DIMENSIONSs
DOUBLE-HUNG WINDOW | FULL FRAME
3-26 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
CLEAR OPENING AND CLEAR GLASS DIMENSIONS, cont.s
DOUBLE-HUNG WINDOW | FULL FRAME
Brickmould
and window profiles
shown for measure-
ment purposes.Clear Opening HeightCheck
Rail
InteriorExterior
Head
4-5/8”
3-1/16”Check Rail HeightSill
4 1/4"Clear Glass Height (lower sash)2-1/32”
InteriorExterior
1-3/4”2-11/32”
Sill
Jamb
Unit Width3"
Head
Interior
4-5/8”
Clear Glass Width
Clear Opening Width
Jamb
3-11/16”Unit HeightCheck Rail
2-11/32”
15/16”
5/8”
5/8”
3/8”29/32”
2-1/4”
1-5/16”
3-1/16”
1-1/2”
SPECIFICATIONS AND TECHNICAL MANUAL
CONFIDENTIAL Double-Hung Window Specifications 3-27JANUARY 2017
• Double-Hung Window - U.S. Patent Number: Des. 394,115
The ornamental design for a double-hung window.
Double-hung window
corner section
DOUBLE-HUNG WINDOW AND RELATED PATENTSs
DOUBLE-HUNG WINDOW
3-28 Double-Hung Window Specifications CONFIDENTIAL JANUARY 2017
SPECIFICATIONS AND TECHNICAL MANUAL
• Extension Jamb – U.S. Patent Number: Des. 5,555,684
An extension jamb extends the depth of a frame to accept a replacement
window. Our patented design improves the standard method of securing
the jambs to the window frame with glue or nails, which is the method
used by many manufacturers.
The design creates a snap-in fit of the extension jamb into the window
frame. This is aesthetically more pleasing and eliminates problems with
staining and finishing that may occur with glue or nail holes.
Installing an extension jamb
Double-hung sill profile
• Joint Structure (Mortise/Tenon) – U.S. Patent Number: Des. 5,603,585
Renewal by Andersen® has a patented design and manufacturing method
to make a welded corner with the appearance of a traditional, hand-
crafted mortise-and-tenon joint. By end-cutting the sash members in a
unique way, we provide a welded corner on the exterior surface of the sash that
provides strength and excellent weathertight construction, while the interior
portion of the sash parts are joined to create a mortise-and-tenon-style corner
joint. This marriage of function and traditional window style is unique in the
window replacement industry.
Mortise-and-tenon-
style corner joint
DOUBLE-HUNG WINDOW AND RELATED PATENTS, cont.
DOUBLE-HUNG WINDOW
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
Installation Package
1314 E Wayne St North
South Bend, IN 46615
PRODUCTS: 18 WINDOWS: 17 PATIO DOORS: 0 SPECIALTY: 0 MISC: 1 Updated 3/25/19
BUYER
John Sherry & Valerie Schey
H: (574)210-9623
C:
Year Built: 1926
caresouthbend@gmail.com
Est. Duration: 2 days
REPRESENTATIVE
Ryan Brown
(317)657-6111
rbrown@windowsbyrba.com
TECH MEASURE
Mike Abarca
mabarca@windowsbyrba.com
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 1 / 33
Order Summary
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
ID#ROOM SIZE DETAILS
JOB
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
101 Dining 37"
35-1/2"
58"
57-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
102 Dining 37"
35-1/2"
58"
57-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
103 Dining 29"
27-1/2"
58"
57-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
104 Dining 29"
27-1/2"
58"
57-3/8"
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 2 / 33
Order Summary
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
ID#ROOM SIZE DETAILS
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
105 Living 37"
35-1/2"
58"
57-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
106 Living 37"
35-1/2"
58"
57-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
107 Living 40"
39-1/2"
58"
57-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
108 master 34"
33-1/2"
54"
53-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
109 master 40"
39-1/2"
54"
53-3/8"
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 3 / 33
Order Summary
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
ID#ROOM SIZE DETAILS
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
110 mastercloset 24"
23-1/2"
45"
45-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
111 mastercloset 24"
23-1/2"
45"
45-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: Sash 1: High Performance SmartSun Glass, No
Pattern, Sash 2: High Performance SmartSun Glass, No Pattern, Tempered Glass
Hardware: White Screen: TruScene with Exterior Color Match, Full Screen
Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1: Colonial 3w x
2h, Sash 2: No Grilles Misc: None Construction: None Material: None
112 bath 28"
27-1/2"
45"
45-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern, Tempered Glass Hardware: White Screen: TruScene with Exterior
Color Match, Full Screen Grille Style: Interior Wood Only (INTW) Grille
Pattern: Sash 1: Colonial 3w x 2h, Sash 2: No Grilles Misc: None
Construction: None Material: None
113 bath 28"
27-1/2"
45"
45-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
114 office 40"
39-1/2"
54"
53-3/8"
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 4 / 33
Order Summary
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
ID#ROOM SIZE DETAILS
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
115 office 35"
33-1/2"
54"
53-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
116 bed2B 35"
33-1/2"
54"
53-3/8"
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior
White, Interior White Glass: All Sash: High Performance SmartSun Glass, No
Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full
Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1:
Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None
117 bed2B 35"
33-1/2"
54"
53-3/8"
Misc: Misc - *Add New, H/O is responsible for any painting or staining to
interior trim or grids needed. Construction: None Material: None
#Room Field 0"0"
PRODUCTS: 18 WINDOWS: 17 PATIO DOORS: 0 SPECIALTY: 0 MISC: 1 Updated 3/25/19
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 5 / 33
Order Summary
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
JOB NOTES
Two story home extension ladders and step ladder.
Exterior brick.
Old double hung windows with old wood storm windows, remove exterior wood stops and metal track to stool, is removable Did
double check. Bring windows in to the interior stops and stools.
Wrap exterior with aluminum wrap to brick to all windows.
Note: All windows are DH. All windows are to look like old original windows.
H/O is aware of responsible for painting or staining to the interior wood grids.
Estimated Duration: 2 days
JOB PHOTOS
Image 1 Image 2 Image 3
Image 4 Image 5 Image 6
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 6 / 33
101
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
101 Dining
35-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 7 / 33
102
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
102 Dining
35-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 8 / 33
103
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
103 Dining
27-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 9 / 33
104
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
104 Dining
27-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 10 / 33
105
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
105 Living
35-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 11 / 33
106
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
106 Living
35-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 12 / 33
107
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
107 Living
39-1/2" W 57-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 13 / 33
108
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
108 master
33-1/2" W 53-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 14 / 33
109
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
109 master
39-1/2" W 53-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 15 / 33
110
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
110 mastercloset
23-1/2" W 45-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 16 / 33
111
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
111 mastercloset
23-1/2" W 45-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 17 / 33
112
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
112 bath
27-1/2" W 45-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: Sash 1: High Performance
SmartSun Glass, No Pattern, Sash 2: High Performance SmartSun Glass, No Pattern, Tempered Glass Hardware: White Screen:
TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood Only (INTW) Grille Pattern: Sash 1: Colonial 3w x 2h,
Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 18 / 33
113
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
113 bath
27-1/2" W 45-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern, Tempered Glass Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style:
Interior Wood Only (INTW) Grille Pattern: Sash 1: Colonial 3w x 2h, Sash 2: No Grilles Misc: None Construction: None
Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 19 / 33
114
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
114 office
39-1/2" W 53-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 20 / 33
115
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
115 office
33-1/2" W 53-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 21 / 33
116
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
116 bed2B
33-1/2" W 53-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 22 / 33
117
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
117 bed2B
33-1/2" W 53-3/8" H
Window, Double-Hung
Window: Double-Hung, Equal, Flat Sill Insert, Traditional Checkrail, Exterior White, Interior White Glass: All Sash: High Performance
SmartSun Glass, No Pattern Hardware: White Screen: TruScene with Exterior Color Match, Full Screen Grille Style: Interior Wood
Only (INTW) Grille Pattern: Sash 1: Colonial 4w x 2h, Sash 2: No Grilles Misc: None Construction: None Material: None 3/22/19
UNIT NOTESUNIT NOTES
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Image 1
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 23 / 33
#
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
#Room Field
Misc
Misc: Misc - *Add New, H/O is responsible for any painting or staining to interior trim or grids needed. Construction: None
Material: None 3/22/19
UNIT NOTES
Tap to add notes
UNIT CONSTRUCTION
UNIT MATERIALS
UNIT PHOTOS
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 24 / 33
Buyer
Signature
Name
Valerie Schey
Date
03/22/19
The homeowner reviewed and signed this order during the
measure appointment.
A representative for the homeowner reviewed and signed this
order during the measure appointment.
The order was not signed during the measure appointment.
Buyer Acknowledgement
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
I acknowledge that by signing this as the homeowner, or on behalf of the homeowner as their authorized agent, I
hereby confirm that all product details, features and options have been reviewed with the Order Verification Specialist
(OVS). The features and options include, but are not limited to:
- Window/Door Color
- Hardware Color and Style
- Grill Configurations
- Interior Trim Style, Color and applicable Details
- Exterior Trim Style, Color, and other applicable Details
- What is and is what is not to be Painted/Stained
Removal and Replacement of the Blinds being solely my responsibility unless otherwise noted. Moreover, I have been
told about potential glass loss with my new windows and I understand that some glass loss will occur. I futher
acknowledge that I have reviewed the order summary, I understand all that has been explained to be, especially that
SOME GLASS LOSS MAY OCCUR, and that the order summary is accurate.
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Renewal Confidential Page 25 / 33
Materials Checklist
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
CATEGORY DESCRIPTION QUANTITY
This list includes the sum total all of the materials for the entire job.
MATERIAL Sillicone - White ...................................................................................................17 Tubes
MATERIAL Paintable - White .................................................................................................8 Tubes
MATERIAL Trim Coil- White ...................................................................................................3 Rolls
MATERIAL Spray Foam ..........................................................................................................6 s
MATERIAL 8' Ladder (Installer) .............................................................................................1
MATERIAL 24' Ladder (Installer) ...........................................................................................1
Materials Checklist | 1314 E Wayne St North, South Bend, IN 46615 Page 26 / 33
Product Order Form
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
Sales Ryan Brown
Tech Mike Abarca
Windows 17
Specialty 0
Patio Doors 0
Misc.1
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
101 DB,FS 35
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
102 DB,FS 35
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
103 DB,FS 27
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 3/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 29 / 33
Product Order Form
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
104 DB,FS 27
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 3/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
105 DB,FS 35
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
106 DB,FS 35
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
107 DB,FS 39
1/2"
57
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 30 / 33
Product Order Form
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
108 DB,FS 33
1/2"
53
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
109 DB,FS 39
1/2"
53
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
110 DB,FS 23
1/2"
45
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 3/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
111 DB,FS 23
1/2"
45
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 3/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 31 / 33
Product Order Form
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
112 DB,FS 27
1/2"
45
3/8"NO Traditional Equal - 1:1 WH WH X3 X3T X3 0 1 Standard White COLONIAL INTW 3/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
113 DB,FS 27
1/2"
45
3/8"NO Traditional Equal - 1:1 WH WH X3T X3T X3T 0 1 Standard White COLONIAL INTW 3/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
114 DB,FS 39
1/2"
53
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
115 DB,FS 33
1/2"
53
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 32 / 33
Product Order Form
dba: RENEWAL BY ANDERSEN
Legal Name: Windows, LLC | License # PA003807
801 Congressional Blvd. Suite 500 | Carmel, IN 46032
Phone: 317-708-7608 | Fax: 808-555-5556 |
Measure Tech: Mike Abarca,
JOHN SHERRY & VALERIE SCHEY
1314 E Wayne St North
South Bend, IN 46615
H: (574)210-9623 | C:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
116 DB,FS 33
1/2"
53
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
117 DB,FS 33
1/2"
53
3/8"NO Traditional Equal - 1:1 WH WH X3 X3 X3 0 1 Standard White COLONIAL INTW 4/2 S
Additional Options: NORMAL OPENING Misc: None Order Notes:
Floor
Plan
ID#
Product Insert
Frame
Ext.
Jamb Ext. Trim Checkrail
Style
Perf.
Upgrade
Exact
Order
Width
Exact
Order
Height
Sill
Angle Sash Ratio Ext.
Color
Int.
Color
Glazing
S1
Glazing
S2
Glazing
S3 Lifts Locks Sash
Oper.Hardware Hardware
Style
Grill
Pattern
Grille
Type
Lites
S1/S3
Lites
S2
Screen
Type
#
Original: 03/22/19 | Updated: 03/25/19 1:48 PM Page 33 / 33