HomeMy WebLinkAboutNational Park Service_Preservation Brief 37_ Appropriate Methods for Reducing Lead-Paint Hazards in Historic HousingSome of the web versions of the Preservation Briefs differ somewhat from the printed versions. Many illustrations are new and in color;Captions are simplified and some complex charts are omitted. To order hard copies of the Briefs, see Printed Publications .
Home > How to Preserve > Preservation Briefs > 37 Lead-Paint Hazards
Most residences painted prior to 1978 will contain some lead-based paint. It
was widely used on exterior woodwork, siding, and windows as well as
interior finishes. This apartment stairhall retains its historic character after
a successful rehabilitation project that included work to control lead-based
paint hazards. Photo: Crispus Attucks Community Development
Corporation.
PRESERVATION BRIEFS
Appropriate Methods for
Reducing Lead-Paint
Hazards in Historic Housing
Sharon C. Park, FAIA, and Douglas C. Hicks
Lead in Historic Paints
Planning for Lead Hazard Reduction
Identify the Historical Significance
Risk Assessment to Determine Lead Hazards
Hazard Control Options
Summary and References
This Preservation Brief is under revision to reflect
current Federal laws and regulations concerning
lead-based paint. This excerpt from the 2006
revision of the Brief provides general background
and evaluation information. For additional
information on current laws and regulations,
contact or visit the websites of the Environmental
Protection Agency and your state’s environmental
and housing agencies.
Lead-based paint, a toxic material, was widely used in North America on both the exteriors and interiors of
buildings until well into the second half of the twentieth century. If a "historic" place is broadly defined in terms of
time as having attained an age of fifty years, this means that almost every historic house contains some lead-based paint.
In its deteriorated form, it produces paint chips and lead-laden dust particles that are a known health hazard to both
children and adults. Children are particularly at risk when they ingest lead paint dust through direct hand-to-mouth contact
and from toys or pacifiers. They are also at risk when they chew lead-painted surfaces in accessible locations. In addition to
its presence in houses, leaded paint chips, lead dust, or lead-contaminated soil in play areas can elevate a child's blood lead
level to a degree that measures to reduce and control the hazard should be undertake.
The premise of this Preservation Brief is that historic housing can be made lead-safe for children without removing
significant decorative features and finishes, or architectural trimwork that may contribute to the building's historic character.
Historic housing—encompassing private dwellings and all types of rental units—is necessarily the focus of this Brief because
federal and state laws primarily address the hazards of lead and lead-based paint in housing and day-care centers to
protect the health of children under six years of age. Rarely are there mandated requirements for the removal of lead-
based paint from non-residential buildings.
Lead in Historic Paints
Lead compounds were an important component of many historic paints. Lead, in the forms of lead carbonate and lead
Preservation Brief 37: Appropriate Methods for Reducing Lead-Paint Ha... https://www.nps.gov/tps/how-to-preserve/briefs/37-lead-paint-hazards.htm
1 of 4 3/14/2019, 11:27 AM
A large-scale historic rehabilitation project incorporated sensitive lead-hazard reduction
measures. Interior walls and woodwork were cleaned, repaired, and repainted and compatible
new floor coverings added. The total project was economically sound and undertaken in a
careful manner that preserved the building's historic character. Before:left, after:right. Photos:
Landmarks Design Associates.
oxides, had excellent adhesion, drying, and covering abilities. White lead, linseed oil, and inorganic pigments were the basic
components for paint in the 18th, 19th, and early 20th centuries. Lead-based paint was used extensively on wooden
exteriors and interior trimwork, window sash, window frames, baseboards, wainscoting, doors, frames, and high gloss wall
surfaces such as those found in kitchens and bathrooms. Almost all painted metals were primed with red lead or painted
with lead based paints. Even milk (casein) and water-based paints (distemper and calcimines) could contain some lead,
usually in the form of hiding agents or pigments. Varnishes sometimes contained lead. Lead compounds were also used as
driers in paint and window glazing putty.
In 1978, the use of lead-based paint in
residential housing was banned by the federal
government. Because the hazards have been
known for some time, many lead components of
paint were replaced by titanium and other less
toxic elements earlier in the 20th century. Since
houses are periodically repainted, the most
recent layer of paint will most likely not contain
lead, but the older layers underneath probably
will. Therefore, the only way to accurately
determine the amount of lead present in older
paint is to have it analyzed.
It is important that owners of historic properties
be aware that layers of older paint can reveal a
great deal about the history of a building and
that paint chronology is often used to date
alterations or to document decorative period
colors. Highly significant decorative finishes,
such as graining, marbleizing, stenciling,
polychrome decoration, and murals should be
evaluated by a painting conservator to develop
the appropriate preservation treatment that will
stabilize the paint and eliminate the need to remove it. If such finishes must be removed in the process of controlling lead
hazards, then research, paint analysis, and documentation are advisable as a record for future research and treatment.
Planning for Lead Hazard Reduction in Historic Housing
Typical health department guidelines call for removing as much of the surfaces that contain lead-based paint as possible.
This results in extensive loss or modification of architectural features and finishes and is not appropriate for most historic
properties. A great number of federally assisted housing programs are moving away from this approach as too expensive
and too dangerous to the immediate work environment. A preferred approach, consistent with The Secretary of the
Interior’s Standards for the Treatment of Historic Properties, calls for removing, controlling, or managing the hazards rather
than wholesale-or even partial-removal of the historic features and finishes. This is generally achieved through careful
cleaning and treatment of deteriorating paint, friction surfaces, surfaces accessible to young children, and lead in soil. Lead-
based paint that it not causing a hazard is thus permitted to remain, and, in consequence, the amount of historic finishes,
features, and trimwork removed from a property is minimized.
Because the hazard of lead poisoning is tied to the risk of ingesting lead, careful planning can help to determine how much
risk is present and how best to allocate available financial resources. An owner, with professional assistance, can protect a
historic resource and make it lead-safe using this three-step planning process:
Identify the historical significance of the building and architectural character of its features and finishes;1.
Undertake a risk assessment of interior and exterior surfaces to determine the hazards from lead and lead based paint;
and,
2.
Evaluate the options for lead hazard control in the context of historic preservation standards.3.
1. Identify the historical significance of the building and architectural character of its
features and finishes
The historical significance, integrity, and architectural character of the building always need to be assessed before work is
undertaken that might adversely affect them. An owner may need to enlist the help of a preservation architect, building
conservator or historian. The State Historic Preservation Office (SHPO) may be able to provide a list of knowledgeable
preservation professionals who could assist with this evaluation.
Features and finishes of a historic building that exhibit distinctive characteristics of an architectural style; represent work by
Preservation Brief 37: Appropriate Methods for Reducing Lead-Paint Ha... https://www.nps.gov/tps/how-to-preserve/briefs/37-lead-paint-hazards.htm
2 of 4 3/14/2019, 11:27 AM
The paint chronology of this mantel, seen in the exposed paint layers in the left
corner, proved it had been relocated from another room of the house. To remove a
significant feature's paint history and the evidence of its original sequence of color by
stripping off all the paint is inappropriate - and unnecessary - as part of a lead
hazard reduction project. Careful surface preparation and repainting with lead-free
top coats is recommended. Photo: NPS Files.
specialized craftsmen; or possess high artistic value should be identified so they can be protected and preserved during
treatment. When it is absolutely necessary to remove a significant architectural feature or finish-as noted in the first two
priorities listed below-it should be replaced with a new feature and finish that matches in design, detail, color, texture, and,
in most cases, material.
Finally, features and finishes that characterize simple, vernacular buildings should be retained and preserved; in the process
of removing hazards, there are usually reasonable options for their protection. Wholesale removal of historic trim and other
seemingly less important historic material, undermines a building's overall character and integrity and, thus, is never
recommended.
For each historic property, features will vary in significance. As part of a survey of each historic property, a list of priorities
should be made, in this order:
Highly significant features and finishes that should always be protected and preserved;
Significant features and finishes that should be carefully repaired or, if necessary, replaced in-kind or to match all visual
qualities; and
Non-significant or altered areas where removal, rigid enclosure, or replacement could occur.
This hierarchy gives an owner a working guide for making decisions about appropriate methods of removing lead paint.
2. Undertake a risk assessment of interior and exterior surfaces to determine hazards
from lead and lead-based paint.
While it can be assumed that most historic housing contains lead-based paint, it cannot be assumed that it is causing a
health risk and should be removed. The purpose of a risk assessment is to determine, through testing and evaluation,
where hazards from lead warrant remedial action. Testing by a specialist can be done on paint, soil, or lead dust either on-
site or in a laboratory using methods such as x-ray fluorescence (XRF) analyzers, chemicals, dust wipe tests, and atomic
absorption spectroscopy. Risk assessments can be fairly low cost investigations of the location, condition, and severity of
lead hazards found in house dust, soil, water, and deteriorating paint. Risk assessments will also address other sources of
lead from hobbies, crockery, water, and the parents' work environment. A public health office should be able to provide
names of certified risk assessors, paint inspectors, and testing laboratories. These services are critical when owners are
seeking to implement measures to reduce suspected lead hazards in housing, day-care centers, or when extensive
rehabilitations are planned.
The risk assessment should record:
the paint's location
the paint's condition lead content of paint and soil
the type of surface (friction; accessible to children
for chewing; impact)
how much lead dust is actively present
how the family uses and cares for the house
the age of the occupants who might come into
contact with lead paint.
It is important from a health standpoint that future
tenants, painters, and construction workers know that
lead-based paint is present, even under treated
surfaces, in order to take precautions when work is
undertaken in areas that will generate lead dust.
Whenever mitigation work is completed, it is important
to have a clearance test using the dust wipe method to
ensure that lead-laden dust generated during the work
does not remain at levels above those established by
the Environmental Protection Agency (EPA) and the Department of Housing and Urban Development (HUD). A building file
should be maintained and updated whenever any additional lead hazard control work is completed.
Hazards should be removed, mitigated, or managed in the order of their health threat, as identified in a risk assessment
(with 1. the greatest risk and 8. the least dangerous):
Peeling, chipping, flaking, and chewed interior lead based paint and surfaces1.
Lead dust on interior surfaces2.
High lead in soil levels around the house and in play areas (check state requirements)3.
Deteriorated exterior painted surfaces and features4.
Preservation Brief 37: Appropriate Methods for Reducing Lead-Paint Ha... https://www.nps.gov/tps/how-to-preserve/briefs/37-lead-paint-hazards.htm
3 of 4 3/14/2019, 11:27 AM
Friction surfaces subject to abrasion (windows, doors, painted floors)5.
Accessible, chewable surfaces (sills, rails) if small children are present6.
Impact surfaces (baseboards and door jambs)7.
Other interior surfaces showing age or deterioration (walls and ceilings)8.
3. Evaluate options for hazard control in the context of historic preservation standards.
The Secretary of the Interior's Standards for the Treatment of Historic Properties -established principles used to evaluate
work that may impact the integrity and significance of National Register properties--can help guide suitable health control
methods. The preservation standards call for the protection of historic materials and historic character of buildings through
stabilization, conservation, maintenance, and repair. The rehabilitation standards call for the repair of historic materials with
replacement of a character-defining feature appropriate only when its deterioration or damage is so extensive that repair is
infeasible. From a preservation standpoint, selecting a hazard control method that removes only the deteriorating paint, or
that involves some degree of repair, is always preferable to the total replacement of a historic feature.
By tying the remedial work to the areas of risk, it is possible to limit the amount of intrusive work on delicate or aging
features of a building without jeopardizing the health and safety of the occupants. To make historic housing lead-safe, the
gentlest method possible should be used to remove the offending substance-lead-laden dust, visible paint chips, lead in
soil, or extensively deteriorated paint. Overly aggressive abatement may damage or destroy much more historic material
than is necessary to remove lead paint, such as abrading historic surfaces. Another reason for targeting paint removal is to
limit the amount of lead dust on the work site. This, in turn, helps avoid expensive worker protection, cleanup, and disposal
of larger amounts of hazardous waste.
Whenever extensive amounts of lead must be removed from a property, or when methods of removing toxic substances will
impact the environment, it is extremely important that the owner be aware of the issues surrounding worker safety,
environmental controls, and proper disposal. Appropriate architectural, engineering and environmental professionals should
be consulted when lead hazard projects are complex. Within the context of the historic preservation standards, the most
appropriate method will always be the least invasive.
Summary and References
Reducing and controlling lead hazards can be successfully accomplished without destroying the character-defining features
and finishes of historic buildings. Federal and state laws generally support the reasonable control of lead-based paint
hazards through a variety of treatments. The key to protecting children, workers, and the environment is to be informed
about the hazards of lead, to control exposure to lead dust and lead in soil, and to follow existing regulations. In all cases,
methods that control lead hazards should be selected that minimize the impact to historic resources while ensuring that
housing is lead-safe for children.
Acknowledgements
Sharon C. Park, FAIA, is the former Chief, Technical Preservation Services, National Park Service. Douglas C. Hicks is the
former Deputy Superintendent, Historic Preservation Training Center, National Park Service. Both authors served on the
National Park Service Housing Task Force addressing lead-safe employee housing and on various national panels to discuss
combining lead-safe housing with historic preservation concerns.
Revised October 2006
Preservation Brief 37: Appropriate Methods for Reducing Lead-Paint Ha... https://www.nps.gov/tps/how-to-preserve/briefs/37-lead-paint-hazards.htm
4 of 4 3/14/2019, 11:27 AM