HomeMy WebLinkAboutOpening of Bids - VPA 2019 Chemical Supply - Harrell's LLCti
CITY OF SOUTH BEND INDIANA `
.Krt pA dtl I.
SELLER'S BID FOR SALE OR LEASE OF MATERIALS
AND NON -COLLUSION AND NON DEBARMENT AFFIDAVIT AND
NION-DISCRIMINATION COMMITMENT FOR SELLERS
BID NAME Venues Parks Arts 2019 Ch. .................... .
January 81h, 2019 (a@ 9:30am
Bidder
Date: l . ----------- (Firm):
Address:,...
City/State/Zip.-
LAhlot:"t ....,. ..33g1S- Telephone Number:
Agent of Bidder (if Applicable);
When the prospective Contractor is unable to certify to any of the statements below, it shall attach an explanation to this Affidavit.
CONTRACTOR'S NON -COLLUSION AND NON -DEBARMENT AFFIDAVIT,
CERTIFICATION REGARDING INVESTMENT WITH IRAN, EMPLOYMENT
ELIGIBILITY VERIFICATION, NON-DISCRIMINATION COMMITMENT AND
CERTIFICATION OF USE OF UNITED STATES STEEL PRODUCTS OR FOUNDRY
PRODUCTS
(Must be completed for all quotes and bids. Please type or print)
STATE OF IOrida )
{.
) SS:
_.......PC.t.�..!�...................-... COUNTY )
The undersigned Contractor, being duly sworn upon his/her/its oath, affirms under the penalties of perjury
that:
1. Contractor has not, nor has any other member, representative, or agent of the firm,
company, corporation or partnership represented by him, entered into any combination,
collusion or agreement with any person relative to the price to be bid by anyone at such
letting nor to prevent any person from bidding nor to induce anyone to refrain from
bidding, and that this bid is made without reference to any other bid and without any
agreement, understanding or combination with any other person in reference to such
bidding. Contractor further says that no person or persons, firms, or corporation has, have
or will receive directly or indirectly, any rebate, fee, gift, commission or thing of value
on account of such sale; and
2. Contractor certifies by submission of this proposal that neither contractor nor any
of its principals are presently debarred, suspended, proposed for debarment, declared
ineligible, or voluntarily excluded from participation in this transaction by any Federal
department or agency; and
3. Contractor has not, nor has any successor to, nor an affiliate of, Contractor, engaged in
investment activities in Iran.
a. For purposes of this Certification, "Iran" means the government of Iran and any
agency or instrumentality of Iran, or as otherwise defined at Ind. Code § 5-22-16.5-5,
as amended from time -to -time.
b. As provided by Ind. Code § 5-22-16.5-8, as amended from time -to -time, a Contractor
is engaged in investment activities in Iran if either:
Contractor, its successor or its affiliate, provides goods or services of twenty
million dollars ($20,000,000) or more in value in the energy sector of Iran;
or
Contractor, its successor or its affiliate, is a financial institution that extends
twenty million dollars ($20,000,000) or more in credit to another person for
forty-five (45) days or more, if that person will (1) use the credit to provides
goods and services in the energy sector in Iran; and (ii) at the time the
financial institution extends credit, is a person identified on list published by
the Indiana Department of Administration.
4. Contractor does not knowingly employ or contract with an unauthorized alien, nor
retain any employee or contract with a person that the Contractor subsequently learns is
an unauthorized alien. Contractor agrees that he/she/it shall enroll in and verify the work
eligibility status of all of Contractor's newly hired employees through the E-Verify
Program as defined by I.C. 22-5- I.7-3. Contractor's documentation of enrollment and
participation in the E-Verify Program is included and attached as part of this bid/quote;
and
5. Contractor shall require his/her/its subcontractors performing work under this
public contract to certify that the subcontractors do not knowingly employ or contract
with an unauthorized alien, nor retain any employee or contract with a person that the
subcontractor subsequently learns is an unauthorized alien, and that the subcontractor has
enrolled in and is participating in the E-Verify Program. The Contractor agrees to
maintain this certification throughout the term of the contract with the City of South
Bend, and understands that the City may terminate the contract for default if the
Contractor fails to cure a breach of this provision no later than thirty (30) days after being
notified by the City.
6. Persons, partnerships, corporations, associations, or joint venturers awarded a
contract by the City of South Bend through its agencies, boards, or commissions shall not
discriminate against any employee or applicant for employment in the performance of a
City contract with respect to hire, tenure, terms, conditions, or privileges of employment,
or any matter directly or indirectly related to employment because of race, sex, religion,
color, national origin, ancestry, age, gender expression, gender identity, sexual
orientation or disability that does not affect that person's ability to perform the work.
In awarding contracts for the purchase of work, labor, set -vices, supplies, equipment,
materials, or any combination of the foregoing including, but not limited to, public works
contracts awarded under public bidding laws or other contracts in which public bids are
not required by law, the City, its agencies, boards, or commissions may consider the
Contractor's good faith efforts to obtain participation by those Contractors certified by
the State of Indiana as a Minority Business ("MBE") or as a Women's Business
Enterprise ("WBE") as a factor in determining the lowest, responsible, responsive
bidder.
In no event shall persons or entities seeking the award of a City contract be required to
award a subcontract to an MBE/WBE; however, it may not unlawfully discriminate
against said WBE/MBE. A finding of a discriminatory practice by the City's MBE/WBE
Utilization Board shall prohibit that person or entity from being awarded a City contract
for a period of one (1) year from the date of such determination, and such determination
may also be grounds for terminating the contact for which the discriminatory practice or
noncompliance pertains.
7. The undersigned contractor agrees that the following nondiscrimination
commitment shall be made a part of any contract which it may henceforth enter into with
the City of South Bend, Indiana or any of its agencies, boards or commissions.
Contractor agrees not to discriminate against or intimidate any employee or applicant for
employment in the performance of this contract with privileges of employment, or any
matter directly or indirectly related to employment, because of race, religion, color, sex,
gender expression, gender identity, sexual orientation, handicap, national origin or
ancestry. Breach of this provision may be regarded as material breach of contract.
I, the undersigned bidder or agent as contractor on a public works project, understand my
statutory obligations to the use of steel products or foundry products made in the United
States (I.C. 5-16-8-1). I hereby certify that 1 and all subcontractors employed by me for
this project will use steel products or foundry products made in the United States on this
project if awarded. I understand l have an affirmative duty to notify the City in my bid
that my proposal does not include the use of steel products or foundry products made in
the United States. I understand it is my sole obligation and responsibility to provide a
justification to the City, subject to review and approval, why the cost of United States
made steel or foundry products is unreasonable. Prior to award and upon submission of
bid which does not use steel products or foundry products made in the United States, the
City, through its director of public works, shall make a determination if the price of
United States made steel or foundry is unreasonable. I understand that violations
hereunder may result in forfeiture of contractual payments.
I hereby affirm under the penalties of perjury that the facts and information contained in the foregoing bid
for public works are true and correct.
Dated this m day of,,&
20
MARY E. EISNER
MY COMMISSION# GO 192162
EXPIRES. March 9, 2022
Bonded Thru Notary Public Undembre
L&C, --- � .... 1''........ . . . ............ . .........
Convacior/Bidder
Sig it of Contractor/Bidder or Its Agent
ir
Printed Name and Title
Subscribed and sworn to before me this cla), or,-Der*4er , 20_1-''
My Commission Expires_
County of Residence
- ----------------- - . . ............. . ...................... . .
No au. public
... . . . . . ....................... ...... ----- ----- . . .. ........... .
Item ... ._ .... Fertilizer see spec sheets for items 1-16) Pk . Size Unit Price _ If Alternative - Include additional Information All
50#fir��
�
3 10 20-20 56 %Methex .,.... ,,,,, m, 50# _.-.
2 8-0-2468%Nmuralene SOP wlMinors 50# I ? �' .........
4 10 49-0 MAP ., 50# 4 .... .... .. �.�.....
5 15 2 15 Tru nlletl ,... ........... ........ ...... ....... 509 d
7 Nulralene, 37 18-9-18 65 % Nutralene wlMinors, —SOP
8 22-0-10 75 % Pol on 41, 25% AS, SOP 50#
9 22-2-19 86 % Pol on 41180 % Pol on, SOP 50# �^
AI on 43140 % Pol on on d1, 50% Pol �._....._....�.�........�,......._........... ._�...........,,, ......w
10 24-015 60! P ......�.,..V...,.�,—M SOP .. _... ___�,.,...._....._.,.. ..�.......,._. 50# a -.... ...... -,. -- �............._®..
11 185-050% Methex wlminors SOP ..IT� 50#.... ._. ..m �..--... 12 26-0-13 70% Pot Own 43, 50./ Poll on SOP 50# —2
24
13 30-0-7 75% PolJ�on 44„S„ MOP 2/FE 50# ,-_--
14 30-0A 97%Pohl on 42, MOP 50#Owe-
-_,w...........15Verde-cal K Plus 0-0 15 mm 50M.. a
w. ...._„..... ...... �,. ... ..
t6 Bio-Max 4-M (Stabilized Nitrogen, 2%Fe, 3%Mn, 52%Ascophyllum Nodosum) 2.5 gallon _�_„,„,,,m,,,m,_ ,,, ,,mm,,,,,__
1 , - --... Phv _ ee _ -
,� 2.5 gallon
18 .. Bio-Max 112-M (Stabilized Nitrogen Potass um Citrate 1% )
co um o osum
�.... ....,.m._.,,-_. mm, Fe, 1%wMn, Asco h Ilum..NodosuT)....,.—:
19 EarthMAX 3% O anic matter from Humas, 4.3%Humic acid from Humas) 2,Sallon h,mm,,,„.
® 20 Max Ironton Mg h%Mg, 5.759/ S, 3 % Fe, 4 % Mn chalated with citric acid) 2.5 gallon
���.... .. ......._. _W..__._..._.m..._...� ....... ..�....�..
Plus 6-" (6% Nitrate, 2%Mg, 2%Fe, 5%Mn, .5j Z 2.S ,anon ... ,,,,,,,,,,
......._2a1�.. Max Nitrate......_. �__ .�..._.
Ilon
llon
tStabll�zed Nitro en Asco h Ilum Nodosum) 2.5 allon
23 Max N30 0�... P y ........... ......... ........
....._..... acid. 3%K) .. .. 2 5 t�all0n....... 24 Max Phosphorus Plus 3303 (3%N, 30%Phosphonc,mm ,�._..m.�. LL.
26 Max Title Ph a 0-0-0g 25 25 � Potassium acetate) 2.5 anon
2 --
Max tress e e e
..... ... .... .....�..�. .....�
0/ PotassiumhosphdeJ 2.S gallon ��..,�........ �.�........ .........., _.....,,®,,.. �..,.....�..
It t.3. ,vvvww _............,.�,..... ......... _..... ..
Item
Chemicals -Re nested
Pkg. Size - Requested
Unit Price
If Alternative - Include additional Information
Alternate Pk . Siz(
27
Ac.l.pryn
.5 gallon
19P , 0
26
A uathol K
2.5 gallon
A . t
29
AzatrolEC
quart
0 1
30
IBannerMaxxll
gallon
31
jBanol
gallon
5 ,
32
Barricade4FL
gallon
_ .............
33
Briskway
gallon
.>
34
Concert II
2.5 gallon
35
Confront
gallonq
,
36
Confront
50lb.
l
37
Conserve SC
quart
C�
36
Copper Sulfate Crystals
50 lb.
39
Chi co 26019E
2.5 gallon
I(SI
40
Clearys 3336F
2.5 gallon
0/7ee VA 1 er
41
Criterion 2F
gallon,
42
Daconil Action
2.5gallon
Wroo
43
Daconil Ultrex
5 lbs.
0,
44
Dismiss NXT
10 oz.
,
45
Dylox 6.2 G
30 lb.
' .
46 lErnerald
10x.49lb.
]Fleet
n47
'� � �,
100
25 ,gan .11o
� a
]Flight.C.ontrol
46
Plus
9 allon
t f
i
49
Garlon 3A
2.5 gallon
�. ®
-7�rclopvK%
�7v
50
Habitat
2.5 gallon
51
Heritage
1lb.CO
52
Instrata
2.5 gallon
53
Intrerface Stress and
2.5 gallon
54
Medallion SC
gallon
�r
55
Meridan 25WG
17 oz..
56
Merit 75 WSP (Mini Drum)
110x1.6 oz.
57
Mirage Stressgard
2.5 gallon
5. oo
56
Nonionic Spreader Sticker
gallon
59
Par SG
��•�
gallon
60
lPrimo Maxx
gallon
61
Provaunt
12 oz.
1 10
62
Proxy
2.5 gallon
l(J
63
Reward
2.5 allon
.?
64
Roundup Pro
2.5 gallon
f
(;/— r�
65
Secure
2.5 gallon
W
66
A f
Iscythe
gallon
67
Signature XTRA Stress and
5.5 lb.
��e�
68
Snapshot2.5TG
SO lb.
69
jSonarOne
201b.
Speedzone Rol
J
Tqi -L 10" GO
71
Subdue Maxx
OU
2-5 gallon
20 —2�r
3
T Zone SE
2.5 gallon
1.:9 V
74
Tartan ard Stressm
'5a 'rd
1 2.5 gallon
00
75
Team 2G Dispersal
40 lb.
76
ity
Tenacity
ilcm
-17—
—T--f- SC �Ultra
240 mi.
:521G
78
Tordon RTU
q..rt
4
_19
Treflan 5G
40 lb.
80
Suspend SC
pint
_11
Triplet SF
.5 allon
.82
Vahsta
22 oz.
_63
Xzomplar
11.4 oZ.
14
—uattas
Pulsar Bri
5 �011 b.
15
Pulsar Shock
25 lb.
86
Hydro.11106C Add 20 BE
150 lb.
0
87
Ferrous Sulfate
50 lb.
—811(f
—Z
88
13 0-5 / 3*/, Baca�e . ....
50 lb.
50 lb.
-0-5 ImAlt"
�w-Lw�yy++,,
w, �
4)
Iw �
U.
3
O
i
p
0
0
rwww
CL
.ww.w
w wwr
L
L
m
L J
m
a
0
L
O
O
O
O
O
d �
N � i
O V
_ d
=' m
E o 3
E f0 •3
is c
_ Y eu 3
— `
O U E
O0
L
W Y 0 O N
E m c 3
a
N •� O 0 +.
E C
U j j
c0 N a c N C -
_ O
U O •Q
O rn �
a
> C )
0 N m N C
� Z O Y N cOi C �s
N c 0 0
0 o c 0
L (0
Q � O p p Co
0
E a) E 0 C
Ri
'•v
— e
Q
U'
^O
OC 'a
Q
E Qm�OY r(D
ccu 3 O2Z o aNi�+
•'�
O
a)a a L U.0
O 0 0
C cc art
w=
U
o E o m
E ca z a) o co= a
..._...
_
........_.
_..........
..........m...-...._w_.
a U) E "a N .0+ G v
c = o d a
o c)cu
0
0
0
ao)
O
O
O
0-CU 0) v. � n O a
r••I
wo
a) a N o a a u d
O E L N -C Co (D LO C N aS
Q
a) C� O m.V O m ram+ � n
O Q 0.
) 44
a) � >+
�>,aMvz @c6�c �oE
w 0�;w Q,�y 5•E Q0
N a cn +• L O O y 0 L
M E N m
C (6 O N
C N O N O
MO = '� U
c a) c 0= a) o O O m C
cu L
N O O a���� = 0 0 0
u1 U) '— U
a 0 -p d C N R y
p 4)>
OTC N fA 0 0
o m c a Y E ay
Co j (0 t: (0 T fC6 C 0 C a
� Ow
N o cri rn >, w
-
0 T LL a) v; o
E
0
N i6 o Q C 0) c Cp 0 L>�
N L 0 E
bUA
O
�'
Z
�•'
,�
7 0 Q -C O U 7
� V1 O 3 'i6 (D ` 'C
N O UJ
O
N
•
(D C O U
C a) C ir• ate+ O C N
a�
CD
°o+w�>,�oo c �E
�mZo��m��0) .�. EO
Q
O
QM
f0 ° LL C cu U
a
ti O
c Z Z >. 00 c m a E
E T E E
>— 3 o U)
03a)Upaa° t �o�
o
.0 O w "o<<Qcns ~
v `�
� p w
cmca>u,Z
c� . • r cw
O mix
(j,OLLL
_.._
�
G«'« U z
O
r.�
a,
00
(U
C
0
O
bOA
d
a
24
O
Cd
0
o
cd
U
N
b
�
cd
cd
04
O
/
Cd
O
rA
--
U
r
tf)
•V]
O
40
Y
�. 304
VJ
•Y
>
cd
a+ bA
U -d
U O
3
Y o
•sy'
• � p
N cd bA � 'y
U
>
p
A
.p m
C3
d
Cd
°
W
E
`d °
2
a,
j
o
1�
C
'� V 0
4�
FSI 1�ti
� 1�-4
U
U
'Y
���Wfffppffpp
W �r
'b
0
W
•O
0
N cd 0
-p N O
Y4C14 f
3 0
a�
m
y
cd
N O
tb
C Q 'tS
U �
•� O a�i
0
04
bn > )
y
N b4f)
Go
N
N
N
.CD
.A
YI
a)
Z
v
x
O
1700 O��0 � Growing Better
n5
MICRO
Batch #: 1801-5002
GUARANTEED ANALYSIS
Total Nitrogen(N)......................................................... 17.0000%
6.0000% Ammoniacal Nitrogen
3.4000% Other/Water-Soluble Nitrogen
5.2200% Urea Nitrogen
2.3800% Water Insoluble Nitrogen
Soluble Potash (K O)., .............. .»».............................. ... 20.0000%
2
Sulfur (S)........................... ....... ..»»»....... ,.................. ..... 13.7800%
13.7800% Combined Sulfur (S)
Iron(Fe) .. ..»»,.»....................................... ,»»..,.. ........... 1.0000%
0.5000% Water Soluble Iron (Fe)
Manganese (Mn).............. »».......................................»,. 0.1410%
0.0710% Water Soluble Manganese (Mn)
Derived From: Methylene DiUrea, Sulfate of Ammonia, Sulfate of Potash, Urea, Ferric Oxide, Ferrous Sulfate, Manganese Oxide, Manganese
Sulfate
F352 Density - 65 lb./cu. ft.
NOTICE: MAY CAUSE STAINS ON CONCRETE. Sweep or blow, Do Not Wash particles that land on hard surfaces.
- - - ................. ..... .. ........
Controlled Release Information
NITROGEN
Contains 5.78 units derived from Methylene Diurea
Directions for Use
Information regarding the contents and levels of metals in this product is available on the internet at: http://www.aapfco.org/metals.htmi
N eELW w 5 L . (2 2...i K ) 1901.5002 051901
7 °r Warningadr°�w,,„ First id
0�000" Nu% If in Eves: Flush with water for 15 minutes. Call a doctor for treatment advice if
s,wnr het"1I� irrIf it Skin: tion rsststhorou Dust may cause Serious Eye Damage 7rthoroughly with soap and water. Launder clothing before reuse.
Skin, Eye and Respiratory Tract Irritant. Harmful if swallowed. If inhaled: Remove affected person from source of exposure. Call 911 if breathing is
difficult,
Brae a utlonar If Ingested: Do not induce vomiting. Get medical attention.
Y 8"111t1.t_R Wear safety glasses with side shields or goggles Have the product label with you when calling a doctor or going for treatment.
when handling product. Avoid breathing dust. Wash face, hands and exposed skin
thoroughly after handling. Do not eat, drink or use tobacco products when using this
product.
MANUFACTURED FOR HARRELCS, LLC PO BOX 807 LAKELAND, FL 33802 (863) 687-2774 (800) 282 8007
rrell's m0ml
• • /
At If Growing Better
MICRO
"i t N
GUARANTEED ANALYSIS
Total Nitrogen(N)......................................................... 18.0000%
7.0000% Other/Water-Soluble Nitrogen
6.1000% Urea Nitrogen
4.9000% Water Insoluble Nitrogen
Soluble Potash(KZO)................................................... 18.0000%
Magnesium (Mg).................................».........................
0.5650%
0.5650% Water Soluble Magnesium (Mg)
Sulfur(S) .......... ......... ......... .......___ .................
6.2310%
6.2310% Combined Sulfur (S)
Iron(Fe) ............ ............................. ......... ........
2.0000%
1.0000% Water Soluble Iron (Fe)
Manganese (Mn) ......... ........a ..»..............................
0.2820%
0.1410% Water Soluble Manganese (Mn)
Derived From: Methylene DiUrea, Sulfate of Potash, Urea, Ferric Oxide, Ferrous Sulfate, Magnesium Sulfate, Manganese Oxide, Manganese
Sulfate
F352 Density - 60 lb./cu. ft.
NOTICE: MAY CAUSE STAINS ON CONCRETE. Sweep or blow, Do Not Wash particles that land on hard surfaces.
..........
Controlled Release Information
NITROGEN
Contains 11.9 units derived from Methylene Diurea
Directions for Use
Information regarding the contents and levels of metals in this product is available on the intemet at: http://www.aapfco.org/metals.htmi
At
N e IMU 50 L S. (22.7 ) 1901-5001 031901
olf"N Warning r"N First stf in y d
00 es: Flush
waterfor IS minutes.
1 um � Dust may cause Serious Eye Damage 1ru7�u treatment advice if
° 0, irritation persists.
If on Skin: Wash with
oro ghly with ap and waldoctor ter.Laundeorrclothing before reuse,
titio
"` dIf Inhaled: Remove affected person from source of exposure. Call 911 if breathing is
Skin, Eye and Respiratory Tract Irritant. Harmful if swallowed. difficult.
If Ingested: Do not induce vomiting. Get medical attention.
P4f4i,f?N1f 5r..:4tgi1t; Wear safety glasses with side shields or goggles Have the product label with you when calling a doctor or going for treatment
when handling product. Avoid breathing dust. Wash face, hands and exposed skin
thoroughly after handling. Do not eat, drink or use tobacco products when using this
product.
MANUFACTURED FOR HARRELCS, LLC PO BOX 807 LAKELAND, FL 33802 (863) 687-2774 (800) 282 8007
y iw.y
N
V' OOy r"eV Q
C y� O V 6
++
s.
Q"
O it
0 3
Q >4
W�yzw.�/
� L w, °C a w a
m sow�Ew
Ln
-
Q W
O 0 n w H v«
to
z
�+W
a'3
Y�rovvjw
0
0
a
o�
rA
,u�+
Cc,C
o
p c� O
° W
Q�w
: -o ° : of 3 v
�.
�y O
y 3
W
8�E3��
`u° a
x. O
L."'
r�1
(',� W
s 0c
'
�i fz
="
Cl. cu
E..i
6
y'
"O
U Z F
�
' � t2 u
C °
.r'
Ci
Lam,
y V
" Gi
> -o c w � �
o !t a
r �'d
3
�
•> �
Q�
V W
� :3 C L C E
O 3
Al
�° �.
Qua
z o
�
q,
�Qvo��a�
x w o o a
"
��.
z
Q W W
_ a
0 o u
v
—'
¢
�
O
+ h
P�
A F A¢
00
o
0
a
U rr V1
O
rA0
C
o w
O rn
CP' bjo
rA c�
G� O ql
cC y
O
>4
Z Q \
vi 0 z
3
v o `v - E w o
v a y 3
O s.
0
�
ni
F, 3
ZUw�
w
on> mo v o c
o
�y
ow�o
�C
0.>�o�===vg
"
�i
� 3 `2: w
•O
O
h0 >
C
O '� O
C
OG LL W
on o 3 ;� c 3 a
o L
,��
N '.� 'O
H~
C
�°y F
E -6 E o
N o A
a
w
>
a'
f� pa
u
N z
u n p
w
txo 2
v
CoQ
y ,
wacn
30
�°��o
O
'o
a.
°ELv
vOi
C71.
a�
w F=
u o> v E
E" vi
p
apWF
o °vtwa` 0
v cd
o
x
o
a w
' L° y o
+r
CS
°
N
�
o u
V
FO .
" > 0 3 T
..r Vl
�: .r
0 .
m
vwi a t �' •• 0°
fC O
■
4.
rn it
O
°
U F. o o > > > m
O bD
+O+ !C
o
T =�
wLU x W W'UW.0
o o
O
1, U x w w
z
� m
E w
E.
O
O
O
O
o
o
O o O p
xw7 LLLUz
m
0
0
0
Y
cam,
�:3wuj
w o
o
w=(UZO
E N
N
rl
r-I
w
<LMU -i
0 ~
E t
m a c
CM
� � W (wLL/1
11 W K
0,0
wa
3
v
a�i
o
Owcdxa
3LL
ou 2
VJ
.y
"bjD
cC
H
o
MM
Q
�t
_(,
p w
Z
O
U
a�
�Q
�oZo3oo
Oco
had
=Q^7;
aaas°
o
^I
•.■
cu
W
v
vi
Y
w
Y Y
■
N
zLLww
zQ,OOZLL
„aaa
p
ELL S.
y
Q�
Y
W
=
C
N
c
N
w}wOJOa)
J x LL. Q U=
�Z�w
w=
Lis
E u
_z
C:
O W O x Z� LL
w
t0 N CNI,.
pip
w a
aQ
O
z 11, [if 0
v=
O
N
c
E
o v
Q J
o
o p
'�
°
Cam_
E
wzU)'n
Q J Z
j
W
O
r .. l
(�
x
N
Q W a
r•1
•
(/]
2.
N
3
O
OLL J>OHOw�
�� c
m d
O
^.q
•�
.0
rn
Z
+�+ L
p0
N
aw+
fU
Y
m
'ai-'
m O
N
J Om
} w U a W J w
�� C
N
w
O
o
=C
3 n
Y
a
3�
�Q�LDEOD
Yw
OdY
0=p?
■ry
`.y�
��
w
C
p
Ul C
7
Y
y
mZ W xLL W w
f/]�z_OOxx
N c
C N
w�
`
V
P=
:
�A
�1�
W
}I
/n■
r+�+I
iV
U
y�
O
C
C-0
4 EJ
Q-
7
y N
�O
OW m W J~
LL U Y LL Z Q 0
= O w
m roA
�..+
!�
i.•I
Z
N-2
> u
m
c
"
00
c
�
w��Oz�x
ryr
rr
C
-O
i i
J Z In W LL
Z
O
U
�
Z
U¢
U
C:
N fo
Jm-WDwtnO
01,
a
•.■
V]
a
H
p0
C L
en
>
m
I�
C C7
$
cn�z0�U~
waQmrrz�
Q w
0 Ei
�+
Z
_
>
v
c Y
22a,-Ozw
0 E 12
mLL
1•M
rI
i••I
.�
U
w o
o-
Ul
C
O
(/7 N H� J J w
Q W u'S
N O 10
°
E O
Q
O O
H
O
0
N
C ry
ate+ w
m o0 C
E
Qr0WQOW
� w (If
Q�—
O L
Eac
E w
O
CC
�
•�
v
J
CV
m
C-
m
Y r,
Y m
w ._ C
z W F-
w
- 0>- z?
o�t
o
c/]
U
rA
ra
a
V°
a
a
m �
= 3 8
mOa-2000
mHLL2 20
JJw
LLfq rL
OIL
LLLL..
V-
0
rl
C1
C)
M
E
4-
00
00
N
0
0o
Ln
n
rI lO
co ^
M �
M
J
LL to
�r,
C Ln
rp N
O
Y Q
J �
EfU
rn aU
2 rLo
f�
a
ru
r6 00
-0 N
M a) N
fa U Ln o
CD
r0 -p
L
ru
Q
L
Q (Q
10 V
� 7
U
r6
7 �
C -C
r6
C
rru
m
7
(D
L\
CU
O
L
LL
4) o 0
': Nf-
0
O
0 O7
v.o
O
C
y
c
a10
a
.6 y
c
rn cu c
C
!'
V
G > L
d '
um
m 13 O
N c0
_
U, O
N
p w
O
(6
� 3 u
�
aL.. N
a
mr
aci
m c
m
•�
N � N
Ol > Q
v p
cc
C
C 7 :
C
7
0 ° T
p
rn
u L
C C
O
O N
g Z
: m
� m = Z
�
m W t L
m
ow � EW
:U
Z m
v
ul
a W L Q.
d c W
J a0
O
«� H oSH,v�
cia QHO��
O CR � L U M
W
�o m�ao�rn
H
y 0 LLI m Z< N= O
a ZCDtiUm
o y OLL .
cp a�m2
.a >- V 'a
N
a
a LU
z o
w
w
UA
Z
Q
O
IL
co
� U
� J O
o O C1Qm
�Oo
0 o wW�
Z Z W Z
a�i iq Op Z
K w �
IL a -1
w w c)0
N
O
l6
Lq
N
zz
W
F-
z
O
U
H
W
Z
_. '� d a w:rc^a
a€
�omU's,�E rn`m Waa
W > 0 .y m E Z> ra '�
c z m d L? o `o d o m ra o aa� w U
o '.' �aa 3 n n o �d>4'�q+cwa
dp mtw NU N N�dOt3 ra OO tl9 LU
Urt CO mom_
O ¢ N c N O O O f? O] O ",3A N D
U)
YU ~o- 0 8�-°0 x t�oo�o N�r=Q
o r a s c c4 m �_ a ' o o %� 3 coi W.-t�i'.' , & q
a�i adi �To �c c ooi -" aoo` wcNyorn.
L j H a :o o m e �+� vw, d Wi5
6 cd c�d mm o �mE da En dm U>M -,o
oO .n, Oo~� "
rn0En2
zp o va on far 8',$d
m z 01 oO wEQL Am N.7 t
O 3 (6 46
d N`O.Eaf
u�`.
m
y0
C LUU
a d d�VO.'Em
D �C'-UYC—Cy�_�°
"N
O a ood0
z F aar--'� mrnc
¢t 2N ioo f
>.Sm o rn� 'moo
o14,
m 3 m U Nin w n� mo a �ody5r 'iti 'm -cd'�co�xdi, ��ri �.oyE
Y
caEi� �o dU >L'1 ,m--"ad�b caoimai a9 •x-°adi mL �Lr CEO
o d 0 w `-' — y 0 N d _ O f d N > (/J -� N
o a O 9 Z$ E w 30 3 E, b° m aci 0 � � N-o o
d N o d L O o�� 7N d m� 0 "o` CU o y iME d a`) o�� "R U...0 -L,
H t d N 2 0� M N � H D D.d ?� ♦ v O� O p c O w Z E d ik �
Z, '�� n m `o ._ N _ m�- n dEmcna+°a U)QR5 to
W o d LU 0 o coo c o '.C-.dXar iA ""�, EEo"ILo �ml.uW �
m~ tO U d >. o� m c'm �a'F c"' ocoi Ea''L m ta&:dxo�a
W c 7 o n c _ V L d t— qL` P.u., ddUT?OE PSG .F� Loom
O' o� O d a coi N'-' E axi a3'c ' aiomxr't udi a' qua mY �i
CY
>,� Y S o !/ c .o c o �� 78 -o o maU E d du
�¢ oyo
LL,
N O
O. UdYd OLL J
W m m 1 J d d ... - o wJi e., >
W oU o 1 Q 0. -0 d dU Z ao
xot w wm� � cid ��/O �d�d rEd a mYacid�n C3
07 d pa W� Y G / '._� U� d % y 5,q d ETC dO d
J a� c w % N IJi ao d d °a a m o Z' r F, 0 R d tJi �y 'Mq c U E li o U = -El, e'Swh E
wa rn d � 3 cfOa % N ;� `mad pow n�ami Y ESN , w U)y ..�'S ow
OU 0 �LLmE�oFn.ac�wmLLdaa lrd=V��5mc 0�rnam o-J LLO
m0
w Z o
�- Q o. ��
mS�c% CO oE mO o OJd owdE
a Em
d �o k—
oe Pta c w
Z«L as d to �... a$ 0. o ayi��in nc� W^�xd„ yo m m, aci aoi k> Em
Vl in n m ['I ;,a U m C7 a. U n t,n. ro i..�7 n' E U U U Q as s7, i t'on
L f O G Al m d J 2 L N O N LU O d d d d
V m •0N CON O YyWVoC Q c ` ~ Al
0 .N-aN N
2 E> o c" . E o
m E
o o N t0 C d g L m
O C c N G. r o y O t..l n �— --L 2� > N
o ui w o as 'a n s 7
o d w
A 3 o w O m 3 w m o n ti
a V
o
O m ,r0 :EAI > 00 � � � .Co.. w � .0
O L O a L
o awa p
3 �v 3 f n di a'o o 3 v vAl
y d O c L Ili as U m $ U
.d ea o o w ., I M t d N xO is N o W
E o d m
n
C o c
tdl C a .uo ' C YI aS y U '�
a w N w C C N c i I N O d 3 d 0
O L N O N V E i c —` >, o .,o. o c . n co U w m o m N o c
N — d � N
ry —, �, d V Q N 9 V I C N> ei=i 2 O C c O U E T
OI w „O- N= p H Y 3 0 d 'O d "' - N 6 CU 02 2
OR 3 d
Vd v .0 ;C O v Ec ai 'Tin m O 2?- 1
ON > O d �c L yy d Cd �
L m oa wO y
r Cm Al 'c :r> W mNV
NE I
E E C
E K y CL
C 0 Coawt 0 a ; m wN *° NE o C o W .te0 0 N
V
.0
VV O C L N
y d tN L
N E 0 C d C GI n O_ .d. O N pl d d Y OIt T c� �' Y N 2
o '0 t t n d 3 `m w o y a u m m a 3 _E o o o E 3
J ox uni n 01 o y d L Z 3 E '� c n v of o d �0 io m rn. U
IF N Z C y i L in a L >, C m—O-, O -C N d L N y d
Z aL+ O W C w y O L q 0 d 1`O I N n w o V E d N U N R O N W d r C
Q N '° a C �IL ° d C �_ r 3 L w U n' " �' a m D N„ C Q.0 N O- '� '—/)
01 H N w A� Al N r L_ N S« C A >. j Z p ry c y N a C N N V
Wo C Z- i N .� d t a]
w= W`_ L N y N O w W Z V a C OP rl W L C '= R E d
m� m yda 1Om vY cax Ov c O m `m o ad oc Al
O a m L 3 y o g a n F d L c o o c W 3 -U m cdi '� c `° d y a`a
�O ma 9 u E o w e o u Q E co o K s d x o- ��� w _-0
d E v C % C O N d d �J -O
Z m 0 3 d E L C N Y d d LL d O d O j
W a Z O p W d.. E :E O U w Z 0 O � 7 d d�� d �" 3 -. m
L A 10 W C N C d 1 Cr II 6� O
.x Q d Q > u c '^ .c u o c a v) E o W o m Y c m d
W U) 3 La L v L y y % a o Y o
r ". Z. 6 F d LU , W U m 'av w m? i o d o ax al W m o m `o c o Z' o ;
U c d d '- 3 c o n 2 w n€ p v o m % o— w m a> m o f
w m m u n E w d Q d a' ' U u v c c i E l W E m " a' S o >, ui
N' o O w c nd' o 0 ii c u Y[ ce> E >, "K t _ >•-- m y c o a c `m m
�x E_ o u_"' m J v E? f
n L d d o o._ 6 m._ m
V E L J O C d d l
w 0 x`a o_ is V Q U AlAI w w .• d E L d E ca ._ ?' m y v
J Z' N L G C d W � H m O N V m •-• o d =_ O N w'
o V) w Q wd-' O d m N y d ca C d; LL IY n 0 Z N / rs d V a O a w N o
O a o 2 d Z° rn y v a o> n- E Q n 0 W E w % o Q d d a o w
r ao u0i dis v_ x'E � 3 t > L. z- m `o 7 rz m w e m m "�Lov
Q c d' E u qa c�,E 6 w Z R o o t O aw
U Q Y w o n d o v `o rn 0 o c f W E w c o"-
�yJ n U) � Vl d IL o z a IL d€ � L+ 3 to (�') udi o �vl o aO o o d w '3' y
K H `o I Q 7 o d o m u7 0 a `m a 3 a E C. F w w �.
N y O— 1, c N a 0 m O
O y a N m
- N
ooEdEm
a
2rn
t ;'. 'PS- rvm• c "E =
nNxN`os as
E c
Ern
o oa`s
OC
*!'`',
taOO O N L-• Oj U Y
tL
o
OE c Yn
c
U j�
O of co_m `o c's w
E ism -- m
O
N n N wa N N Ul rn
N N c OU t— L yOj NL-
O _W 0
y N lO
L
O E N L „O`„ - O
c m �' 3
y pO
y
fO U O) Lu N> N
Y
C0."�C N N'a. Q" U
�_ y�vs NaL >o m
m a
c oft °sue osm
O
? y >.� —
�0NLo
N I N
was
as
n
m
a a 3 m m 3 o. w.
a 3
� m m m 2
af°idEnm
0� m To
E o wL6 3 Eia m
-
N r
C O)
O
L
o
tLi1 al
—a alga} o�c oa La m
N
a la
c �a m'F
m
N O C
���Nos-ig
o
Y W '"•'." c to
U.Wro1ly O ad N> U
T Z;
j� y't
C.0 OI�N.O-
m y N` O1 E ucia
Uw nc �O
0 3�. % '#»."-am Em
��'¢._-o
E>o rn-ot
EV
,ui
y fi����;. E.: C -a-U d O 7 C
o
N N (n N u0i
py�=aas
a TN C d U 3 O
`
'v
o aEi y m xo E m
m ,��y ar% '� j T n ran aEi N d
a� =;
r° y as L
a`s E w m
> %y:, ry "4' p a Q 'yyp N y 5
NSr u� ->
N N - 3— Z
L j LL R a
ca' .r a," > m i •^.• c `s
m °+!^a`r �pc£aa k•. anE iEs' =
E
ov�mm�
�aEEo0o
to
of
E Ero o.,l'* 7,a c°m ra c c E. 4a�Y L
dW
U m N m oQ
y O !T N
d aai cf°i c c
y `. Ow C
ZIV.
3
�coa Ox. oc�o E� ic,"oa•' to
G n(O
1O o�ao`o
s—
a_
8E'�cay'yo
N
a to C_� y d U,p
e1, N y y 0 "m to o
�w -O
y 0 y O
TI, N m"a U
m
y a
>Ewq2a�. ; ta+' ^ric_o ism t+5 a
a'vrnas E as
ocmc4mow�
¢
N�
^En
'� cOi o N
Ern.°sc
t y
�
D ti
m:za
U 3 u)
as a`sn�os
m N EL
V owl
wl
N y `O d i> a
Q"C
C
Cmt,"p ..ye �=_„y dAY a0 mm U'
O C
i�yY•�.d
.O-C$L�J
E
W C7
x?iYtl
cA y
rNtl f 4 S�F'dF�^.•� }y Cui. Z O
O
c�J N
VC
C7
m(C} dm d .07 dll. FN
m m w,
ma 000
O y O }' O `•- a
Q�o EO"N'yC
2 U O
Q.
X
m [2 o
a
w�
oIXx rco aE�o Lu sryronao uj
IX�"roi.
m-o'oc�
3m3O°m°��
W O
y'� �''�, c �° ` Ow <.1 m �' U
IIIJII%//�O
Q
a o m n a�ci
2 m.y o m
O us
E c,:" coi m "o "` .. 61 J y
US 'k
G`a"" aa,":
Ir
V
T w rp C d r�Op
c t 3 3 0 �'o w
ac
Q:—
W N
�::.. aci Y�
m a m�>�'
rC. C'DA m I C�; C 0 Cl µ? E �=
d
� d
E�cLiyL�
l.L C V
y
ccfe1 tOEas :-°m
O O c to a m U�
i O E
Z
A YA h �t N Z
'O O� 3
G� LL
N li
VOl
O m N
jp f0 N 5C a
N U N
A o-F-¢
K'Y "m.
k '�;+ tc!=� Ou�i-4-V?::� Kn
�,.
m y IU
m�mmas=as
Ol_T
nm o`o'm o�_o
W O
.t�1
a LL N 0
F i
�-% m rnCJ m
Q U m OI m r 3 d
m o c wa a c °1 N ;B m E o ,M°" gun > V a> m m v
C o"IE
n y o n •'`' m ik1 a.° a m,
n �•j' o 2 c y ' as a5 ea as a rof. e : ;1,ry
s 9,! T vx aIn 0C O n N ? a a O O CUl
ds. ee�"SS
15
Fe
o a m.
y EroLa$AX _ M CO %tlIXtm E �
is
m grwyr �.. �Umaw
k.
}Y Y4 �- X U O N Cg pIXtl qs. C T Ctl Gtl 0 C'1. A.A U p do A �J � O 55n fib
Er •L ru, c xr. tiw'� a' c •: rx.. , ,a.a ar qa "p roa
o E _ i r" "* x a cs sw�, m m n cr a� aA ai c"x n ;� c .R ry arb o E ii aa. Cu as . , rsn+u'' t L -' t
rro m.3
vy c E
� as •y n ap, E a � �, rx o c 'f" we ci, a a � .ro rn w,
w •,� M M —�^r Wa.. C��b. ° �I � '",A O roMe Wdk 44 "KO 0 K,p � � m apr W � �w M1� B f",' a
c ror wrs y E .m c c'e k-. k e t r`� a Ica
s e 3m
�yy ro;.. .. ten �• a m is au ti'a eas Mgr "
q} "" Ill pro N kM qF a9a dla aw "C- An' fin.
say '" Ciro o E r. ,r thy,
`
Ct .aPa ` P ca es cy., y ^L n m o. tu, IX 'rs "u' ,g t .o o - .
"r Cc-" pp�" wa�
�„ryw«^ire y�oai �m �i"'' ^•1+LU �a %'sgyis m�oa
ro4 'E a" ''S �o c m cro e"a rar o a a�. m a " i �, 'r IXa. �
�E na aro ;C} tiro rr "" me y nn: m m E rs.. E. a row erou ,. Era Cis m m xn
f"> MU f: l �' P" tl9: d L 9 roX to +SA 4qi F O a7 'GdM N y C R 4� roJ vY Wi'b @k
F
�i iu E �,n ar ��. to f � � �. Sw cw a'u m i'�
R u? W{ 2.-ra+p dry'.'
`Nry a —.�z.10
mx4finry O LrrY y IXaa?rsa" .`ittr£rrwvarr .crA"r'A,tl m+dtiEw',�3x ca+dun Lororoa±,
L3a4aCns u
IS
ub a`° M rcqrw :n.a
nsTsr E r 4J1 �� 1r
Om m, E
m i' y vyw tl9vA-4sA,+,; 1n o is r o E
r 'fi�4M1lnrJyA+w .,
,
.m yy 41 L� "a C ,_ « Ca. m� F 4s �FYwSa An N 4OA nF 4
us' m w
o rzf h �
y cx In TWO LL,
> ca m ru m vn "zro Z d d ca rs m a"r.. xa c ros vw itia� W a
ro na ros
n`
rv,r ars P n w , vry "" o arcs as . s'e W m Z c is ns �`I - r; y E E 3 , . f `ycrss P
vj
a ran v a ua"a <a ,.,, y r LL CA w m 0 cis E. ��.- j, 3 Cy C' , "r�` E
err. 9M wrr,Pa W tx - ear " u'u k: w a`s �' rm w7t c c rwr ^r^r y w ra r" �k,u uwy U 53 is
ca imp c°".r ca•a V rsmmu rros urs .�nai' e5Jt'wro ti.c wm r rvruroa Win..:nc k E r�C E�ms0 x n o a
w c.os:LW ¢at ) M - ati"
a ca mri - 2 ,com
U U) cli 4 ara u,
gy
.E
L
.�
_O O
4Y
N N tl3 ;N ..gym..
�..
PA.
L
2
m R
o a. a
a) E u>
m . ..2 .E:
w
Fa
m
'z
<
w
sq E. �...
N ..a � m
� � .® N
-• ..5, R) ,C
�
9Y > LI... ray P`
L.]
C
(6Y
N ,>
O
;.n
h
1.
LL _
N Q
•N y
',
m O
',. CU et
CO
c0
rdJ
O
o
m -
m
U
m m
II `o `o
N rn
a E E
c
is
a
t
�'
E o� o
a E c B E
2d
y v' n. a.
y
O
c 5
y o
c `o c o
ro m ro
N U N c o
a `d
pe
o
m
H
6 V
H U H CJ
m ro
C7 `en I- V
s ar
V rt Z -J mY
0
W
'm
m
o:
N ..
B n
M
y
C
E
E
U
0 LL O
c y
O N N
LL
W �
R N
� O
a v
0
o
K
N
E
K
V
N
al
N O
R
O C
N O
� U
N
d
R
O
0
LU
Q
O
LU
a!f
Lu
CL
Z
LLF
O
W
w
0
LU
W
K
2
Om��QO�m N-6�MN E�;N.
oC�3t`"o EO Q
.oT.=--- E"5
m0an�mxm Sm- EEo�
d� a�
dRL �� o Vi n
a aL a)t OOm CO � y-6 � N a)>im
o a`cron u�a.3 _rn>[a`rn Ra y a 3 R_o
a>=OcEomEo-c a na ioi N Z do
af6i �' moo_aa`�c�'y as R 3 `o .2 o
aLLG-N nNY�lplO C�LU) OU�N
E_
p�UL 3 OIm O O N Q N
a.o 0 1O apt o �a m a v�i N m E m
c oHE rn�ROE m N m o.5 m
Ra Op RoaS LRjV`d� _�. �O NY O5
mLLU a O N
E a5 "nno'm-- a m m >
<� p o
incRTNa OR
E
. _-E-
-ia n3 c_ E E C fQ-
-D C N Q O E OLD E C y
_ E Er o N R a
Tlz m5 E n c
R- oQ c m a
o E E o o 0 o t 3-
> am.N am,_, N2 a rnaa
R N N U L O -0--_ -
R -0,
2 L Od =a C N o '. ou : SLL
�� c �=' aRi c mc" o E vRi aU T.o 3 d a
> E N t n'Z6 w .- R al V 'V o E a N
R.6 V'U O d L N c F- A Od -E E O
- a 0 0` R d, U a� O a d
R U=L-
�a Na)a-- Na N O
> R N R N C
`m -oLmm u oft �[n m n o o c�
o mao a? ti m °;> o�
.: 9� io d LT C 2 N .d `-F- a`� o� n t3L 76 E
�
? � > D aL O dTd R O R U .R � � � � Q
E N
R� Lr S) R
U ancti �2jg 15- C alama G O ar No to
o-��N
Ems--mcZdooi n N w' n_ E
L 2Oov o R �p=o o QN Li o a`Oi o> do
n o . LL�
. L" O E dc2Lo E- R N dwa
TN �`OOm y�Oa>m-NNN� CLSI�T-a0
min RAN - =E oEcR o
R o o o'a w atOi `m m a`� R m � > mar ya .cRi in c
cmE"cd= co ui m-.J m
ONLEp NLN N w0000 OOw R-C GL na)oa
OU a3 Rr3Emda Zm R� iX Q o mm R
sp
N
O
-
d
o x o
o E
�9tm
a
rn 3 d
0
L`oi
IO
E
t
C L
O R N
.o
a m
n C V
R 2d
O O
N
N
O
R m
N E m
a:E
R
n
N
Ecri
R y
O
E .0
m
d
S a LT
o m
m
m 0
O U
Q
R W O
N a N
L C_
E
a "- EO
O E U
a
C-
d a C N
c E a
U
L
N c o
3 .0 !E
i
LO
R >
R E
Y
t6 R
R
N
-
O
O Q
O
N O a
Z
R N
•- N
0
a N L_
N C 3 E
E
al O C0
N p
N
T
R N O
a
c Q l6
N O
LO
n m o
Q
n `o m
U 6
a �° E
o
n
n
>
R R
Q R
Q O
Q
O
N C`
N
Y
LO
T
�
N
R t
w oN_
O �
o W
O
�
R
c E
E
€
O y
0 0
N
N t V LO
fq 0
10 N (O Q
C Lsj
N U
R
n -
E
0
-aO LE
E
A T
, -W
M
a 2 -1
17, o
Of
j E -E
0
CU E
O. -'E
E.
s
A-
E
m O
F-g
E PE
2
E
:1 8
x c o
mY
w 2
Q
16
5-8 m m
o'fi
E
E
m -2.E
-LL
o E w� >, 2
g o
0 E
1,
7.1
F.
is
22
E
af
t 7
- -6 Z
w
w
<
,f �5 2 2
<.2 o Z- -Z a- nQ-
O
w F
o
c�l eo
�R
C,
c,
F
o
c�
o
LL
m
lz�
o
-��4
o
-�-j
o
-�A
a
0
-�4
o
0
aka
w 'md
IL
a.
-o E z�
o
AL
z
0w
133
.E
S
LU
0
0 w , c
02 .
42 a'
3o !Mz
-
E�
>
0
a- Rti
w CL
ac)
4 .2
(n
.!2 0
0 0
t, w L'L QY m
E
Z E
atl
�2
E
> 0 0
>
Flu N C 2
o rg
elf
Of
0
F
z
F,
CO'
IR
wa
SJ O
NA.
U
u
-61
o
i6
E2
CK
E
g. w lu
0 E
E
E
E
Ec
y0
6
E
as
to
2!
o
gs a
LU
Ew
2.
2:1
S
n
®b 0 -E 0
0 a m'6
c
tl E -'l $-4
L) V -
LU g
-Z -E�g
f-U 1XI
0
4C WD <N1m E
0
0
0
al
r- 0 -4�L zY @flE`o
cg
21 E CL 2 0 a0 -
w 212!,
o
C) S
E��ah Co
—00
Ef
'Z-S
-C)
E
0 0.-
w
U)
m o Z� LL Z;
✓
04
.0 Cop
10
Ero
(3 Ef
cr
-1
CL Q-
C/jC
J U <
0 m
12,
coa
-N
ML rn M1
E
0 L
m Q
m
.2
2 .0
LU
-o
cl)
f 11)
's R7,
EE
w
LL
2
LU
0 ii
's
�5 F
,
LL
S
LU
"n
>
E
Ix
z
0
U
w
U)
m
z
z � z
z
mw�ow
o< w z z
w � m >- -
� W L) w (D
w
Ix
0
z
z
0
z
0
0
LL
z
6i
z
0
P
U
w
U)
6-
-6
E
6,
E
z c"yry,. 4�0;,
IN 5
Z
o w
E
E
-Z E
o �
E
76
E
;-- 'B
lu
re
10 j�
0
0
U) o
z
in cul
IN,
2
0 m
'a, iz
V
E
0 Z5
1� F
-2 -F F
U) z �0'
Q uj
Rs 6,5
j
16
lo
gi
m
LU
cV g
E.8 I"
-1 Z:
0 3,0 t
E Al
C)
a- O'd
aw X 0, Zj 0
ramie a
E
C)
u pR,p KI 0
6
E ce
0
in
cr
CK
LIA 0
ca 5, 1�
>
oIr
4s
wr, Lu
N
QD 0- Q:
Q� i�
J�
2>
r.
p
4e u
k A-
A-,
-6 5
t
8
r
P t ,� i�j
.F, C 15
rz
g�2
-K
iz
E
sE
R
> mw
0 o
5
a
2� 2.
M. li R z �A
E w
rn u,
n .ct I
43
C
�
9} E { 2
1.
a F
to
C
, cn
i
Z
L
%.9
o m ..s «
2 vx z zi r= Fu z
Qw
a
0
N
z
a
z
J
0
Z
Q
M
r28,
�s'4
ro
h
Z
(l
O
Q �
m
U
f
Z
�
v
g
rn
0:
a
v
mo ¢
W
zz¢
¢3
z
O
E
'o
NE yZ rvZ.,
m
WNZr ems
J _
w�L,ptW HHE,
O m QU m y o
rnUK��N'a
r manT
F �drS
5
Z h ppy -
m. P.CZy,"+`
tiM
.62
—
aww a u oLL�roi eylaKq b•" sa. w
0 0 0
ca0 zxo„
a w
'wui
R rs r.k. rx
V 3
I G
w
w
w
IL
w
a
O
O
a�
r
a
-
o F
n o
F
w
y
Q
,
o rc
<
.xlo
V
a�
a
In
a
ao
n F O
O a
L)
ci
U r o
J y� N
c�
p 0
`W Iq . i l l o wa
m
@�
O O 9 IR.'.
C
O
'0
O
m
fI AI.R.
6
rn
Ij
w
m
�.l
e®
w w m en
,ycp
2 0
�w .`"
¢
N
:- 4:A
�'
pA apN;
IS
,
12; R
P,
,59
91
LD
LLJ
E
LLJ
50
Yr
z
LLJ
n.o
LU
L6 00
00
C.1
0
C14 LLI
uj
mi
<
z
uj
a) O O
ai LO
Nn0
0
G u.
L .
�Loo
g LLI
`
L
c
m
C
a7
ro
a`)
C
-0ar
0
C
m..
seen
m C
3 O +O
C m
d m
O > L
Q
LL
N � O
m m m
_
7 !—
O a7 OMA 0
O
'zz
: Qj
9
O 'D
E
tl)
ya)
a�♦
V
9 N
C yy C
m 3 m
d a
W ` C
CUJ
N
a > a
(D
vc°) o
c
:
t v
r e �
t
00
'C)
C C
O m N
'0 at Z "Z
. y
•c
m� WLW
C1
•'�
OC
('
y A z mZ
CL a
U
'
'o
w H o =
`2
,. QHO
i-
wU a7
C)�
r U
> T
o
Q O
w
O
m
o cu
Q
rn
c
o
a
cm
E
m N
vi c
m
3
c
O
LO L a)
U
C
a)
E
CDC
0-0
aL
U C
O
S
O
E (O
L r
w
C E
[�6 yc
U
O
cl p
o c
3
0 m
c `aS m
0) w E
E
3
m `o
Y N .�
? O
O
`m
m
`E�Iaa)o
m
ns
35�
rn a
?o
co
ac°i >.
'.'.. E�
Y -E
o E E
ca; m
C,.
V
C N
O
a�
N C
a)
c
O
0 Q
ai cOi
c
a� o
Nam.-. ,
E c
E C
ado
N
QC O
o v
O)C
T.3 m O.. O
O >
��.p'
O U
O_�
Q
� a O
c$
-p c0
N C
a 3 o
O c
�O
m E
SL
m O_ w
w
U N
a)
N a) p
m
�p 0
3 0
U
W
L
aJ
p
d O_
` O
m N
C p p
co
U
U,.....c
1°
c.n�
`8 O o
aciU
0 c,..cU
0 o
v
aa) c
c
8"E -
o N
` U
a) C
O a�
U
O m
m
O
C W c
N
>` N
V7
>
Q -- O
>
C
T V O_
ID
A m
U
a N�
.L... N
3
c o
O a) O_
L co
_......-'........�.
aoi E
O
H N
O a]
T U U
.. ..........
[6 N C
U 0) 8
�.......-......._
O U
- C
co O
`0 0
cw
'z
.c
o
x
U
N
W
li
Q
p
LU
z
O
w
a
E
z
z
O
=
3
v,
> m
co
mom �WaoiWM
tV r-oo WMao a'rn
o
0oc0) 2 V)=v
ar m nr a aNi U o
6F9 a7 Q Z OI 1- ao
0 C3 OLL • 7
jt m W a- to
V eF
a) V N
IU1 z N
ul Q LU
W a7
m ao
w
z
O
O
O CD
J O
UQ�
O o
0 0 way
z z xwz
LLO' w �QyQ 0 0
d d Ja0°¢
W W U-0]
C
O
{O
LQ
N
F
z
W
F
z
O
U
F
W
z
i [97MR&Il
ACTIVE INGREDIENT KEEP OUT OF REACH OF CHILDREN
Alkoxylated Polyols.....................................................100%
CAUTION
NONPLANT FOOD INGREDIENT
F352 Read entire label for additional
precautionary statements and use directions.
FOR PROFESSIONAL USE ONLY
FIRST AID
If on Skin: Wash with soap and water. Consult a physician if any
irritation persists
PRECAUTIONS
If in Eyes: Rinse with clean water for 15 minutes. Remove contact
Avoid getting in eyes or on skin. The use of safety glasses lenses after the first 5 minutes and continue to rinse. Seek
with side shields (or goggles) and water repellent, medical attention if irritation persists.
chemical resistant gloves when handling this product is
If Ingested: Call 911 or a physician for treatment advice.
recommended.
Do not contaminate food, feed, seed or water supplies
during application or when cleaning equipment. Have the product label with you when calling a doctor or going
IN CASE OF SPILL OR MEDICAL EMERGENCY, for treatment.
CONTACT CHEMTREC 1-800-424-9300.
a
NET CONTENTS:
250 gallons (946 liters) 30 gallons (113.52 liters) 2.5 gallons (9.46liters)
[—] Weight per gallon: 8.59 lbs. @ 68°F
1. 1 �■� Harrell's, LLC
Growing aBetterWol Post Office Box 8071 Lakeland, FL 33802 1(800) 282-80071 Harrells.com
Hydro-90 is a soil surfactant designed for use on turfgrass and ornamentals. Plug Production: Drench before germination or after first leaf stage with 2-4
Once in the root zone, Hydro-90 helps reduce soil water repellency, a cause fl oz per 100 gal water thoroughly wetting potting media.
of localized dry spot (LDS). When used as directed, Hydro-90 will help to Regular Irrigation Injection: 0.13 fl oz/100 gal of water (10 ppm) or 0.10 fl oz
improve the infiltration and overall movement of water in the root zone. per gallon stock solution at 1:100 Injector Ratio.
Hydro-90 is readily soluble in water and can be applied with conventional
application equipment. Apply Hydro-90 early in the season prior to the Weekly Irrigation Injection: 1.3 fl oz/100 gal of water (100 ppm) or 13 fl oz
onset of stress. Do not apply Hydro-90 to turf and ornamentals under per gallon stock solution at 1:100 Injector Ratio.
stress.
DIRECTIONS FOR USE
Soil surfactant for use on turfgrass and ornamentals. Hydro-90 is intended
for use as a single component in a spray application. Ajar compatibility
test should be performed on unknown combinations prior to mixing and
application.
RECOMMENDED RATES
Greens, Tees, Fairways, Lawns and Sports Turf
Long Term Rate: Apply 8 fl,oz per 1000 sq, ft. in sufficient water for
thorough coverage. Follow up with second application of 8 fl.oz per 1000
sq. ft. 7-10 days later. Irrigation is recommended after each application in
sufficient amounts to remove Hydro-90 from leaf surfaces. Reapply after 3
months or as necessary.
Short -Term Rate: 3 -6 fl oz per 1000 sq. ft. on a monthly basis or 2 - 3 fl oz
biweekly. Irrigation is recommended after each application insufficient
amounts to remove Hydro-90 from leaf surfaces. Apply insufficient water
for thorough coverage.
Ornamentals
Potting Media Treatment: Spray 2 -4 fl oz per cu yd in at least 2 gallons of
water per cu yd, Apply to media during blending,
Production and Pre -shipment: Drench 6-8 fl oz/100 gal water thoroughly
wetting potting media.
STORAGE AND CONTAINER DISPOSAL
Store above 457. Store this product in a dry place, in original container
only. Keep lid tightly closed. Keep away from open flame or intense heat.
Triple rinse container and offer for recycling, if available, or dispose of in
accordance with federal, state and local authorities.
CONDITIONS OF SALE
Seller warrants that products will be labeled as required under state and
federal laws and that they conform to the label description. Any non-
conformance must be reported in writing to Seller within Thirty(30) days
after purchase as a prerequisite to maintaining any claim against Seller.
Buyer agrees to inspect all products purchased immediately upon delivery.
The seller's liability under this warranty is in lieu of all other warranties,
expressed or implied, including warranties of merchantability and fitness
for a particular purpose.There are no warranties which extend beyond this
statement.
Information regarding the contents and levels of metals in this product is
available on the Internet at http://www.aapfco.org/metals
19 �I l�il�Harrell's, LLC
Growing aBetter ' Post Office Box 807 1 Lakeland, FL 33802 1 (800) 282-8007 1 Harrells.com
di in o
ioim ll
S eci en Label
A Herbicide for Control of Woody Plants, Annuals and Perennial
Broadleaf Weeds in Forests, Grass Pastures, Rangeland, CRP
acres, Rights -of -Way, and in Non -Crop Areas and Ornamental Turf,
Industrial Sites and Non -Irrigation Ditch Banks
ACTIVE INGREDIENT:
% BY WT.
"Triclopyr BEE: (3,5,6 Trichloro-2-Pyridinyl)
oxyacetic acid, butoxyethyl ester ....................... . „ „ , . 61.6
OTHER INGREDIENTS: ................................., .... 38.4
TOTAL: ........................ 100.0
Contains petroleum distillates
"Contains 4 pounds of triclopyr acid equivalent per gallon (44.3 %)
EPA Reg. No. 81927-11 EPA Est. No. 42750-MO-001111
EPA Est. No. 37429-GA-0011
EPA Est. No. 53883-TX-002G51
EPA Est. No. 81134-CHN-001IH"
EPA Est No. 81 927-AL-001 11
Letter(s) in lot number correspond(s) to superscript in EPA Est. No,
KEEP OUT OF REACH OF CHILDREN
CAUTION
FIRST AID
If in eyes: Hold eye open and rinse slowly and gently with water for 15-20
minutes.
Remove contact lenses, if present, after the first 5 minutes, then
continue rinsing eye.
Call a poison control center or doctor for treatment advice.
If on skin or • Take off contaminated clothing,
clothing: Rinse skin immediately with plenty of water for 15-20 minutes.
Call a poison control center or doctor for treatment advice.
_......._._._........._..........................................................._._._.................._._._.......-..........................
If swallowed: Immediately call a poison control center or doctor.
Do not induce vomiting unless told to do so by the poison control
center or doctor.
Do not give any liquid to the person.
Do not give anything by mouth to an unconscious person.
If inhaled. Movepersonto fresh air. _._—.. _..................._......
If person is not breathing, call 911 or an ambulance, then give
artificial respiration, preferably by mouth-to-mouth if possible.
Call a poison control center or doctor for further treatment advice.
----------- HOTLINE NUMBER
_____._. ........._.............a_
Have the product container or label with you when calling a poison control center or
doctor, or going for treatment. You may also contact 1-800-424-9300 for emergency
medical treatment information.
----------------------------m -NOTE TO PHYSICIAN --.
Contains petroleum distillate — vomiting may cause aspiration pneumonia.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if absorbed through skin, inhaled, or swallowed. Causes moderate eye irritation.
Avoid contact with skin, eyes, or clothing. Avoid breathing vapor or spray mist. Prolonged or
frequently repeated skin contact may cause allergic reactions in some individuals.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical -resistant to this product are listed below. If you want more
options, follow the instructions for category E on an EPA chemical resistance category selec-
tions chart.
Applicators and other handlers who handle this pesticide for any use covered by the
Worker Protection Standard (40 CFR Part 170)— in general, agricultural -plant uses are
covered — must wear":
• Long-sleeved shirt and long pants
Chemical -resistant gloves such as barrier laminate, nitrile rubber, neoprene rubber, or viton
• Shoes plus socks
Applicators and other handlers who handle this pesticide for any use not covered by
the Worker Protection Standard (40 CFR Part 170)—in general, only agricultural -plant
uses are covered by the WPS — must wear:
Long-sleeved shirt and long pants
Shoes plus socks
Fallow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for
washables are given, use detergent and hot water. Keep and wash PPE separately from
other laundry.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40
CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as spec-
ified in the WPS„
User Safety Recommendations
Users should:
Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet,
Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on
clean clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves
before removing. As soon as possible, wash thoroughly and change into clean clothinc
ENVIRONMENTAL HAZARDS
This pesticide is toxic to fish. Do not apply directly to water, to areas where surface water is
present, or to intertidal areas below the mean high water mark. Do not contaminate water
when cleaning equipment or disposing of equipment washwaters,.
This chemical has properties and characteristics associated with chemicals detected in
groundwater. The use of this chemical in areas where soils are permeable, particularly
where the water table is shallow, may result in groundwater contamination.
Physical or Chemical Hazards
Do not use or store near heat or open flame. Do not cut or weld container.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling
Do not apply this product in a way that will contact workers or other persons, either directly
or through drift. Only protected handlers may be in the area during application. For any
requirements specific to your State or Tribe, consult the agency responsible for pesticide
regulation,
this product only in accordance with its labeling and with the Worker Protection
tifslyd, 40 CFR Part 170, This Standard contains requirements for the protection fit
;: hwal workers on farms, forests, nurseries, and greenhouses, and handlers of agri-
oal pesticides. It contains requirements for training, decontamination, notification,
emergency assistance. It also contains specific instructions and exceptions pertain -
to the statements on this label about personal protective equipment (PPE) and
r'IrMed.cmTry interval (REI). The requirements in this box only apply to uses of Mis
�lud that are covered by the Worker Protection Standard..
not enter or allow worker entry into treated areas during the restricted entry interval
11 of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker
Protection Standard and that involves contact with anything that has been treated, such
as plants, soil, or water, is:
• Coveralls
Chemical -resistant gloves such as barrier laminate, nitrile rubber, neoprene rubber, of
viton
Shoes plus socks
---...........
_w ww _.m......................
NONAGRICULTURAL USE REQUIREMENTS
'I he requirements in this box apply to uses of [his product that are NOT within the scope o1
IIho Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The VPS
applies, when this product is used to produce agricultural plants on farms, forest, nurseries,
or greenhouses.
[Do not enter or allow others to enter the treated area until sprays have dried, u
General Information
Alligare Triclopyr 4 is a herbicide used to control unwanted woody plants and annual and
perennial broadleaf weeds
• in forests
on permanent grass pastures, rangelands, and conservation reserve program (CRP) acres
(including non -irrigation ditch banks and fence rows within these areas)
on non -crop areas including industrial manufacturing and storage sites
on rights -of -way such as electrical power lines, communication lines, pipelines, roadsides,
and railroads
• on fence rows
on non -irrigation ditch banks
around farm buildings
on perennial bluegrass, perennial ryegrass, and tall fescue ornamental turf (including sod
farms, commercial turf, and golf courses)
Alligare Triclopyr 4 use on these sites may include application to grazed areas as well as for the
establishment and maintenance of wildlife openings.
u uui
uim uuulp 41
General Use Precautions
Agricultural Use Requirements for Forestry Uses: For use of this product on forestry sites,
follow PPE and Reentry restrictions in the Agricultural Use Requirements section of this
label
• Use Requirements for Non -Cropland Areas: No worker protection Standard worker entry
restrictions or worker notification requirements apply when this product is applied to non -crop-
land,.
• Local conditions may affect the use of herbicides„ Consult your local specialist for advice
in selecting treatments from this label to best fit local conditions.
• Alligare Triclopyr 4 may injure certain turfgrass species„ Do not apply to bahiagrass, bent -
grass, bermudagrass, centipedegrass, St. Augustine grass, or zoysiagrass, unless turf
injury can be tolerated.
• Do not apply Alligare Triclopyr 4 to exposed roots of shallow rooted trees and shrubs,.
• Do not apply Alligare Triclopyr 4 to golf course greens.
• Do not apply more than 2 qts. of Alligare Triclopyr 4 per acre in a single application when
spot treating.
• On use sites other than grazable areas and forestry sites, do not apply more than 8 lbs. as
per acre per year of lriclopyr (8 qts./A/yr Alligare Triclopyr 4)„
On use sites that may be grazed, including rights -of -way, pasture, fence rows, and range-
land, do not apply more than 2 lbs. as per acre per year of triclopyr (2 qts./A/yr of Alligare
Triclopyr 4)„
• On forestry use sites, do not apply more than 6 lbs. ae per acre per year of lriclopyr (6
qts./A/yr of Alligare Triclopyr 4).
• In Arizona: The slate of Arizona has not approved Alligare Triclopyr 4 for use on plants
grown for commercial production; specifically on designated grazing areas or use on sod
farms.
Do not apply this product through any type of irrigation system.
Do not apply to ditches used to transport irrigation water. Do not apply where runoff or irri-
gation water may flow onto agricultural land as injury to crops may result.
It is permissible to treat non -irrigation ditch banks, seasonably dry wetlands, flood plains,
deltas, marshes, swamps, bogs and transitional areas between upland and lowland sites.
Do not apply to open water such as lakes, reservoirs, rivers, streams, creeks, salt water
bays, or estuaries.
• Do not apply this product through mist blowers unless a drift control additive, high viscosi-
ty inverting system, or equivalent is used to control spray drift.
• Avoid direct application to Christmas trees as conifer injury may result. When treating
unwanted vegetation in Christmas tree plantations, use sprays directed away from
conifers.
Do not make direct applications or allow spray mists to drift onto cotton, fruit or orchard
trees, shrubs, grapes, peanuts, soybeans, tobacco, vegetable crops, flowers, citrus, or
other desirable broadleaf plants.
• Many (orbs (herbaceous broadleafs) are susceptible to Alligare Triclopyr 4. Unless injury or
loss of such plants can be tolerated, do not spray pastures containing desirable broadleaf
forbs (especially legumes such as clover). After applications the stand and growth of estab-
lished grasses is usually improved, especially when rainfall is adequate and grazing is
deferred..
• While established grasses are tolerant to this product, newly seeded grasses may be
injured until well established (as indicated by vigorous growth, tillering and the develop-
ment of a secondary root system). Do not reseed treated areas for a minimum of three
wQ7ekhafter ttl'oMment,
• While Alligare Triclopyr 4 is formulated as a low volatile ester, the combination of spray con-
tact with impervious surfaces (such as roads and rocks) and increasing ambient air
temperatures may result in an increase in the volatility potential for this herbicide, increas-
ing a risk for off -target injury to sensitive crops such as grapes and tomatoes.
• Portions of grazed areas that intersect treated non -cropland, rights -of -way and forestry
sites may be treated at up to 6 lbs. as per acre if the area to be treated on the day of appli-
cation comprises no more than 10 % of the total grazable area.,
• Use of his product in certain portions of California, Oregon, and Washington is subject to the
January 22, 2004 Order for injunctive relief in
0132C, (W.D. WA). For further information, please refer to http://www.epa.gov/esppAvtc.
Grazing and Haying Restrictions
Except for lactating dairy animals, there are no grazing restrictions following application of
this product.
Grazing Lactating Dairy Animals: Do not allow lactating dairy animals to graze treated
areas until the next growing season following application of this product..
Do not harvest hay for 14 days after application.
Slaughter Restrictions:
Withdraw livestock from grazing treated grass or consumption of treated hay at least 3 days
before slaughter. This restriction applies to grazing during the season following treatment or
hay harvested during the season following treatment,.
APPLICATION DIRECTIONS
RATES
This table assists in determining proper volumes of Alligare Triclopyr 4 in the spray tank to
avoid exceeding the maximum use rates listed:
Maximum, AppilaafBon Rates
Alligare Triclopyr 4
'.... Spray Volume Per
Quarts per 100 gallons of spray
volume
Acre
-_.......2 quarts/acre.... .........6..quarts/acre... .......8
quarts/acre.....__
400
Do not use 1.5
2
300
Do not use 2
I,.....�4------..---
2.7
200.............
..... Do not use 3
_............. IT......_-
100
..------_ .-2.-----. ..-__fi...............
...... 8 ...._...--
50
4 12
..m.
16
20
10 30
40
10
20 60
80
Spray Additives
Surfactants - If a standard agricultural surfactant is used, use at a rate of 1 to 2 quarts per
acre.
Drift Control Agents —Agriculturally registered spray thickening drift control agents or high
viscosity invert systems may be used with Alligare Triclopyr 4„ When using these agents, fol-
low all use directions and precautions on the product label. Do not use a thickening agent
with the Microfoil boom, Thru Valve boom, or other systems that cannot accommodate thick
sprays.
Mixing Directions
Apply Alligare Triclopyr 4 foliarly by diluting with water or as an oil -water emulsion.. NOTE:
An oil -water emulsion performs more dependably under a broader range of conditions than
a straight water dilution for woody plant control and is recommended for aerial applications.
Oil -Water Emulsions
NOTE: Prior to preparing oil -water emulsion sprays in the mixing tank, conduct a jar test to
check spray mix compatibility.
Prepare the oil -water emulsion using diesel fuel, fuel oil, or kerosene plus an emulsifier such
as Sponto 712 or Triton X-100.
Ground Application: Add oil at a rate of 5 to 10 % of the total to the spray mix (up to a
maximum of 1 gallon of oil per acre) and use an agricultural spray emulsifier according to
mixing instructions below.
Aerial Application: Add a 1:5 ratio of oil and water (1 part oil to 5 parts water) to the spray
mixture (up to a maximum of 1 gallon of oil per acre) according to the mixing instructions
below.
Oil Mixture Sprays for Basal Treatment
When preparing an oil mixture, be sure to read and follow the use directions and precautions
on the manufacturer's product label. Prepare oil -based spray mixtures using either diesel fuel,
No. 1 or No. 2 fuel oil, kerosene or a commercially available basal oil. Substitute other oils or
diluents only as recommended by the oil or diluent's manufacturer. Add Alligare Triclopyr 4 to
the required amount of oil in the spray tank or mixing tank and mix thoroughly. Reagitate if the
mixture stands for over 4 hours.
Water Dilutions
To provide improved wetting of foliage using water dilutions, an agricultural surfactant at the
manufacturer's recommended rate may be added to the spray mixture.. To help minimize
spray drift, a drift control and deposition aid cleared for application to growing crops is rec-
ommended.
Tank Mixing
Alligare Triclopyr 4 may be applied in combination with labeled rates of other herbicides pro-
vided:
• The tank mix product(s) are labeled for the timing and method of application for the use site
to be treated; and,
• Tank mixing is not prohibited by the label of the tank mix product(s).
NOTE: The following compatibility lest Qar test) should be conducted prior to mixing ingre-
dients in the spray tank when tank mixing Alligare Triclopyr 4 with other materials:
1.. Use a clear glass quart jar with lid and mix the tank mix ingredients in the required order
and their relative proportions.
2. Invert the jar containing the mixture several times and observe the mixture for approxi-
mately'/z hour.
3. If the mixture balls-up, forms flakes, sludges, jells, oily films or layers, or other precipitates,
it is not compatible and the tank mix combination should not be used.
Mixing Order for Tank Mixes: Add one-half of the needed water to the mixing tank and
begin agitation. Add the tank mix partners in the order indicated below, allowing time for com-
plete dispersion and mixing after the addition of each product.
1, Water soluble herbicide (if used)
2„. Premix of oil, emulsifier, Alligare Triclopyr 4 and other oil -soluble herbicide (if used); see
below
Add the remaining water. During the final filling of the tank, a drift control and deposition aid
cleared for application to growing crops may be added, as well as an agricultural surfactant
if a water dilution rather than an oil -water emulsion spray is used, To ensure spray uniformi-
ty, maintain continuous agitation of the spray mixture during mixing, final filling and
throughout application.
Premixing: Prepare a premix of oil, emulsifier (if oil -water emulsion), and Alligare Triclopyr
4 plus other oil -soluble herbicides if used (for example 2,4-D ester). Note: Do not allow water
or mixtures containing water to get into the premix or Alligare Triclopyr 4 since a thick "invert"
(water in oil) emulsion may form that will be difficult to break. An emulsion may also be
formed if the premix or Alligare Triclopyr 4 is put into the mixing tank prior to the addition of
water.
Tank Mixing Precautions:
Read carefully and follow all applicable use directions, limitations and precautions in the
respective product labels.
Do not exceed specified application rates. If products containing the same active ingredi-
ent are tank mixed, do not exceed the maximum allowable active ingredient use rates.
When using spray equipment where the product formulations will be mixed in undiluted
form (such as direct injection), special care should be taken to ensure tank mix compati-
bility.
Mixing with Liquid Fertilizer for Broadleaf Weed Control
For weed control and fertilization of grass pastures, Alligare Triclopyr 4 may be tank mixed
with liquid nitrogen fertilizer and applied foliarly. Use Alligare Triclopyr 4 according to the use
directions in this label for grass pastures, and apply at the rates recommended by your sup-
plier or Extension Service Specialist provided that no maximum application rates specified
on this label are exceeded. Note: Because foliage burn caused by liquid fertilizer may
reduce herbicide effectiveness on woody plants, Alligare Triclopyr 4 is not recommended for
use with liquid fertilizer on woody plants (brush).
Test for mixing compatibility using the desired procedure and spray mix proportions in clear
glass jar before mixing in spray tank. A compatibility aid such as Unite or Compex may be
needed in some situations, and in difficult situations premixing Alligare Triclopyr 4 with 1 to
4 parts water may help,. NOTE: Compatibility is best with straight liquid nitrogen fertil-
izer solutions. Mixing with N-P-K solutions or suspensions may not be satisfactory
even with the addition of a compatibility aid.
Fill the spray tank approximately half full with the liquid fertilizer, then begin agitating and add
the herbicide. Complete filling the tank with fertilizer and apply immediately maintaining con-
tinuous agitation in the spray tank during application. Do not store liquid fertilizer spray
mixtures. Because the likelihood of mixing or compatibility problems with liquid fertilizer
increases under cold conditions, application during very cold weather (near freezing) is not
recommended.
Note: Do not use spray equipment for other applications to land planted (or to be planted)
to susceptible crops or desirable plants unless it has been determined that all phytotoxic
herbicide residue has been removed by thoroughly cleaning the equipment.
APPLICATION EQUIPMENT AND TECHNIQUES
Avoid drift. Very small quantities of spray may seriously injure susceptible plants. Do not
spray when wind is blowing toward susceptible desirable vegetation. The applicator may
detect the potential for drift by producing smoke at or near the spray site and observing for
a temperature inversion or for potential of off -site movement, If the smoke layers or indicates
a potential of hazardous spray drift, do not spray.
Broadcast Applications
Alligare Triclopyr 4 may be applied aerially by fixed wing aircraft or helicopter to rangeland,
permanent grass pastures, and conservation reserve program acres. For all other use sites
listed on this label, Alligare Triclopyr 4 may only be applied aerially by helicopter.
For aerial application to rangeland, permanent grass pastures, and conservation
reserve program acres:
Air (Fixed wing aircraft or Helicopter) — For aerial applications to rangeland, permanent
grass pastures, and conservation reserve program acres, apply Alligare Triclopyr 4 through
a Microfoil or Thru-Valve boom, or use an agriculturally labeled drift control additive. Do not
use a thickening agent with the Microfoil or Thru-Valve booms, or other systems that cannot
accommodate thick sprays. Keep spray pressures low enough to provide coarse spray
droplets and spray only when the wind velocity is low (follow state regulations). Avoid appli-
cation during air inversions.
Air (Helicopter Only) — When making aerial applications on rights -of -way or other areas
near susceptible crops, efforts should be made to minimize drift. Applications should be
made with nozzles and pressures which provide adequate plant coverage, but minimize the
production of fine spray particles. Drift can be minimized by applying through the Microfoil
boom or Thru-Valve boom. Drift control agents or high viscosity invert systems can also be
used to minimize drift. Do not use the high viscosity invert system unless it is as effective as
the booms listed or as effective as available drift control agents. Use of low pressure noz-
zles; and operating these nozzles in the lower end of the manufacturer's recommendations
is advised. To minimize drift, use a spray boom that is no longer than N the rotor length,
spray when wind velocities are low; or by using an approved drift control system.
Note: Reference within this label to equipment produced by or available from other parties
is provided without consideration for use by the reader at its discretion and subject to the
reader's independent circumstances, evaluation, and expertise.. Such reference by Alligare,
LLC is not intended as an endorsement of such equipment, shall not constitute a warranty
(express or implied) of such equipment, and is not intended to imply that other equipment is
not available and equally suitable. Any discussion of methods of use of such equipment does
not imply that the reader should use the equipment other than is advised in directions avail-
able from the equipment's manufacturer. The reader is responsible for exercising their own
judgment and expertise, or consulting with sources other than Alligare, LLC, in selecting and
determining how to use its equipment.
Spray Drift Management
Avoiding spray drift at the application site is the responsibility of the applicator. The interac
Lion of many equipment and weather related factors determine the potential for spray drift
The applicator and the grower are responsible for considering all these factors when mak
ing decisions.
The following drift management requirements must be followed to avoid off -target drift move-
ment from aerial applications:
1. The distance of the outer most nozzles on the boom must not exceed % the length of the
wingspan or rotor.
2. Nozzles must always point backwards parallel with the air stream and never be pointed
downwards more than 45 degrees..
Where states have more stringent regulations, they must be observed
The applicator should be familiar with and take into account the information covered in the
following Aerial Drift Reduction Advisory. [This section is advisory in nature and does
not supersede the mandatory label requirements]
Aerial Drift Reduction Advisory
Information on Droplet Size
The most effective way to reduce drift potential is to apply large droplets. The best drift man-
agement strategy is to apply the largest droplets that provide sufficient coverage and control.
Applying larger droplets reduces drift potential, but will not prevent drift if applications are
made improperly, or under unfavorable environmental conditions (See Wind, Temperature
and Humidity, and Temperature Inversions).
Controlling Droplet Size
Volume — Use high flow rate nozzles to apply the highest practical spray volume. Nozzles
with higher rated flows produce larger droplets.
• Pressure — Do not exceed the nozzle manufacturer's recommended pressures. For many
nozzle types lower pressure produces larger droplets. When higher flow rates are needed,
use higher flow rate nozzles instead of increasing pressure.
Number of nozzles — Use the minimum number of nozzles that provide uniform coverage.
Nozzle Orientation — Orienting nozzles so that the spray is released parallel to the
airstream produces larger droplets than other orientations and is the recommended prac-
tice. Significant deflection from horizontal will reduce droplet size and increase drift
potential,
Nozzle Type — Use a nozzle type [hat is designed for the intended application. With most
nozzle types, narrower spray angles produce larger droplets. Consider using low -drift noz-
zles. Solid stream nozzles oriented straight back produce the largest droplets and the
lowest drift.
Boom Length
For some use patterns, reducing the effective boom length to less than % of the wingspan
or rotor length may further reduce drift without reducing swath width..
Application Height
Applications should not be made at a height greater than 10 feet above the lop of the largest
plants unless a greater height is required for aircraft safety. Making applications at the low-
est height that is safe reduces exposure of droplets to evaporation and wind.
Swath Adjustment
When applications are made with a crosswind, the swath will be displaced downwind.
Therefore, on the up and downwind edges of the field, the applicator must compensate for
this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance
should increase with increasing drift potential (higher wind, smaller drops, etc.)
Wind
Drift potential is lowest between wind speeds of 2-10 mph. However, many factors, includ-
ing droplet size and equipment type determine drift potential at any given speed. Application
should be avoided below 2 mph due to variable wind direction and high inversion potential.
Note: Local terrain can influence wind patterns. Every applicator should be familiar with local
wind patterns and how they affect spray drift.
Temperature and Humidity
When making applications in low relative humidity, set up equipment to produce larger
droplets to compensate for evaporation. Droplet evaporation is most severe when conditions
are both hot and dry.
Temperature Inversions
Applications should not occur during a local, low level temperature inversion because drift
potential is high. Temperature inversions restrict vertical air mixing, which causes small -sus-
pended droplets to remain in a concentrated cloud. This cloud can move in unpredictable
directions due to the light variable winds common during inversions. Temperature inversions
are characterized by increasing temperatures with altitude and are common on nights with
limited cloud cover and light to no wind. They begin to form as the sun sets and often con-
tinue into the morning. Their presence can be indicated by ground fog; however, if fog is not
present, inversions can also be identified by the movement of smoke from a ground source
or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward
and rapidly dissipates indicates good vertical air mixing.
Sensitive Areas
The pesticide should only be applied when the potential for drift to adjacent sensitive areas
(e.g. residential areas, bodies of water, known habitat for threatened or endangered species,
non -target crops) is minimal (e.g. when wind is blowing away from the sensitive areas).
Ground —Applications should be made with nozzles and pressures which provide adequate
plant coverage, but minimize the production of fine spray particles. Large droplet producing
equipment, such as the Radiarc sprayer may aid in reducing off -target drift. Drift control
agents or high viscosity invert systems can also be used to minimize drift. Use of low pres-
sure nozzles; and operating these nozzles in the lower end of the manufacturer's specified
rates is advised. To minimize drift, keep the spray boom as low as possible, apply in > 20
gallons of spray volume per acre, spray when wind velocities are low; or use an approved
drift control agent.
High Volume Leaf -Stem Treatments: Make applications no higher than brush tops with low
pressure and coarse spray droplets to minimize spray drift. A drift control agent may be used
to reduce spray drift.
Ft IicwrtG n DWW6ons trur RN ht of•Way, Industrial Silos, Non�Cr op Areas„..,
PP g s- Nali-
Irrigation Ditch Banks, Forests, and Wildlife Openings including Grazed Areas on
these Sites,
Refer to Tables 1 and 2 of this label for a list of woody plants and broadleaf weeds that are
controlled by Alligare Triclopyr 4.
Folfar Applications
Apply Alligare Triclopyr 4 at rates of 1 to 6 quarts per acre for the control of broadleaf weeds
and woody plants. Do not exceed the maximum use rate for the use site being treated. Apply
in enough water to provide uniform and complete coverage of the plants to be controlled. For
best results make applications when woody plants and weeds are actively growing. Use
higher doses within the range when brush averages 15 feet or more in height or when brush
covers > 60 % of the area to be treated.
For hard -to -control species such as ash, black gum, choke cherry, elm, maples (other than
TRICLOPYR
n
vine or big leaf), oaks, pines, or winged elm; during late summer applications when plants
are mature; or during drought; use higher rates of Alligare Triclopyr 4 alone or use in com-
bination with Tordon` 101 Mixture or Tordon' or Picloram K. If lower rates are used on
hard -to -control species, re -sprouting may occur in the year following treatment..
If easy to control brush species dominate, rates less than those specified may be effective.
Consult state or local extension personnel for information.
When making applications of Alligare Triclopyr 4 in a tank mix with 2,4-D low volatile ester
herbicide, use higher rates of Alligare Triclopyr 4 within the range for satisfactory brush con-
trol.
When tank mixing, refer to the individual product labels for precautionary statements, restric-
tions, specified rates, approved uses, and a list of weeds and woody plants controlled..
Folfar Applications with Ground Equipment
High Volume Folfar Applications
For control of woody plants, apply Alligare Triclopyr 4 at 1 to 3 quarts per 100 gallons of
spray mixture. Coverage should be thorough to wet all leaves, stems, and root collars. See
Table in RATES section for relationship between mixing rate, spray volume and maximum
application rate.
Tank Mixing: 1 to 3 quarts of Alligare Triclopyr 4 may be tank mixed with labeled rates of 2,4-
D low volatile ester herbicide, Tordon' or Picloram K, or Tordon` 101 Mixture diluted to make
100 gallons of spray. These applications should be made in 100 to 400 gallons of total spray
per acre depending on size and density of woody plants. When tank mixing, refer to the indi-
vidual product labels for precautionary statements, restrictions, specified rates, approved uses,
and a list of weeds and woody plants controlled,
Low Volume Folfar Applications
For control of woody plants, mix up to 20 quarts of Alligare Triclopyr 4 in 10 to 100 gallons
of spray solution. Adjust the spray concentration of Alligare Triclopyr 4 and total spray vol-
ume per acre to match the size and density of target woody plants and kinds of spray
equipment used. With low volume sprays, use sufficient spray volume to obtain uniform cov-
erage of target plants including the surfaces of all foliage, stems, and root collars. For best
results, a surfactant should be added to all spray mixtures, See the SPRAY ADDITIVES sec-
tion for a rate recommendation.
Match equipment and delivery rate of spray nozzles to height and density of woody plants„
When treating tall, dense brush, a truck mounted spray gun with spray tips that deliver up to
2 gallons per minute at 40 to 60 PSI may be required. Backpack or other types of special-
ized spray equipment with spray tips that deliver less than 1 gallon of spray per minute may
be appropriate for short, low to moderate density brush, See Table in RATES section for rela-
tionship between mixing rate, spray volume and maximum application rate.
Tank Mixing: Up to 12 quarts of Alligare Triclopyr 4 may be applied in tank mix combina-
tions with labeled rates of Tordon' or Picloram K, or Tordon' 101 Mixture as a low volume
foliar spray. These applications should be made in 10 to 100 gallons of spray solution, When
tank mixing, refer to the individual product labels for precautionary statements, restrictions,
recommended rates, approved uses, and a list of weeds and woody plants controlled.
Broadcast Application With Ground Equipment
Use equipment that will assure thorough and uniform coverage at spray volumes applied.
Woody Plant Control
Foliage Treatment: Apply 4 to 8 quarts of Alligare Triclopyr 4 in a minimum of 5 gallons of
spray solution per acre. Alligare Triclopyr 4 at 1.5 to 3 quarts per acre may be tank mixed with
labeled rates of 2,4-D low volatile ester. Tordon' 101 Mixture, or Tordon' or Picloram K in a
minimum of 5 gallons of spray solution per acre. When tank mixing, refer to the individual
product labels for precautionary statements, restrictions, recommended rates, approved
uses, and a list of weeds and woody plants controlled.
Broadleaf Weed Control
Apply 1 to 4 quarts of Alligare Triclopyr 4 in a minimum of 5 gallons of spray solution per
acre, Apply at any lime weeds are actively growing. Alligare Triclopyr 4 at 0.25 to 3 quarts
per acre may be tank mixed with labeled rates of 2,4-D amine or low volatile ester; Tordon'
or Picloram K; or Tordon" 101 Mixture to improve the spectrum of activity. For thickened
(high viscosity) spray mixtures, Alligare Triclopyr 4 can be mixed with diesel oil or other
inverting agent, When using an inverting agent, read and follow the use directions and pre-
cautions on the product label, When tank mixing, refer to the individual product labels for
precautionary statements, restrictions, recommended rates, approved uses, and a list of
weeds and woody plants controlled.
Aerial Application (Helicopter Only) - Aerial sprays should be applied using suitable drift
control. See the SPRAY ADDITIVES and the APPLICATION EQUIPMENT AND TECH-
NIQUES section.
Foliage Treatment (Utility and Pipeline Rights-ot-Way) — Apply 4 to 8 quarts of Alligare
Triclopyr 4 alone per acre or tank mix 3 to 4 quarts per acre of Alligare Triclopyr 4 with
labeled rates of 2,4-D low volatile ester; Tordon' 101 Mixture; or Tordon' or Picloram K. Do
not apply more than 2 quarts per acre of Alligare Triclopyr 4 alone or in tank mix to areas
that may be grazed unless the requirements specified in the General Use Restrictions sec-
tion are followed. Apply in total spray volume of 1 to 30 gallons per acre, Use the higher rates
and volumes when plants are dense or under drought conditions. When tank mixing, refer to
the individual product labels for precautionary statements, restrictions, recommended rates,
approved uses, and a list of weeds and woody plants controlled.
Basal Bark and Dormant Brush Treatments
To control woody plants in rights -of -way, in other non -crop areas, forests, rangeland and per-
manent grass pastures; use Alligare Triclopyr 4 in oil or oil -water mixtures prepared and
applied as described in the "Mixing Directions —Oil Mixture Sprays for Basal Treatment" sec-
Nru rtr Mt ww
tion of this label. Do not graze treated areas following use of oil or oil -water mixtures. For
non-foliar applications on rangeland and permanent grass pastures, apply no more than 2
quarts of Alligare Triclopyr 4 (2 lb. as of triclopyr) per acre per year.
Oil Mixture Sprays - Add Alligare Triclopyr 4 to the required amount of oil in the spray tank
or mixing tank and mix thoroughly.. If the mixture is allowed to stand for more than 4 hours,
agitation is required.
Oil -Water Mixture Sprays - Prepare a premix of Alligare Triclopyr 4, oil, and surfactant in a
separate container. Do not allow any water or mixtures containing water to get into the
Alligare Triclopyr 4 or the premix. Mix in spray tank as follows:
1. Fill spray tank 1h full with water.
2. Begin tank agitation and continue throughout mixing and spraying.
3. Add premix
4. Continue moderate agitation.
5, Fill remainder of spray tank.
Note: If the premix is put in the tank without any water, the first water added may form a thick
"invert" (water in oil) emulsion which will be hard to break.
Oil - Water Mixtures of Alligare Triclopyr 4 and Tordon" or Picloram K: When mixed
together in oil, these herbicides are incompatible and will not form a stable mixture. Stable
tank mixtures of Alligare Triclopyr 4 and Tordon' or Picloram K for basal bark application can
be made if each product is first combined with a compatibility agent prior to final mixing in oil
in the desired ratio. (See product bulletin for mixing instructions.)
Basal Bark Treatment - To control susceptible woody plants with stems less than 6 inches
in basal diameter, mix 1 to 5 gallons of Alligare Triclopyr 4 in enough oil to make 100 gallons
of spray solution. Apply with knapsack sprayer or power spraying equipment using low pres-
sure (20-40 PSI). Spray the basal parts of brush and tree trunks to a height of 12 to 15 inches
from the ground. Thorough wetting is necessary for good control. Spray until runoff at the
ground line is noticeable. Old or rough bark requires more spray than smooth young bark.
Apply at any time, including the winter months, except when snow or water prevents spray-
ing to the ground line.
Low Volume Basal Bark Treatment - To control susceptible woody plants with stems less
than 6 inches in basal diameter, mix 20 to 30 gallons of Alligare Triclopyr 4 in enough oil to
make 100 gallons of spray solution. Apply with a back pack or knapsack sprayer using low
pressure and a solid cone or flat fan nozzle. Spray the basal parts of brush and tree trunks in
a manner which thoroughly wets the lower stems, including the root collar area, but not to the
point of runoff. Herbicide concentration should vary with size and susceptibility of species
treated., Apply at any time, including the winter months, except when snow or water prevents
spraying to the ground line or when stem surfaces are saturated with water.
Alligare Triclopyr 4 Plus Tordon" or Picloram K in Oil Tank Mix —Alligare Triclopyr 4 and
Tordon' or Picloram K may be applied as a low volume basal bark treatment to improve con-
trol of certain woody species such as ash, elm, maple, poplar, aspen, hackberry, oak,
oceanspray, birch, hickory, pine, tanoak, cherry, locust, sassafras, and multiflora rose. (See
product bulletin for mixing instructions,)
Streamline Basal Bark Treatment - To control or suppress susceptible woody plants, mix
20 to 30 gallons of Alligare Triclopyr 4 with 10 % penetrant such as Cide-Kick or similar pen-
etrant in enough oil to make 100 gallons of spray solution. Apply with a backpack or
knapsack sprayer using equipment which provides a directed straight stream spray. For
stems less than 3 inches in basal diameter, apply sufficient spray to one side of the stems
to form a treated zone that is 6 inches in height, When the optimum amount of spray mix-
ture is applied, the treated zone should widen to encircle the stem within approximately 30
minutes.
Treat both sides of stems which are 3 to 4 inches in basal diameter. Direct the spray at bark
that is approximately 12 to 24 inches above the ground. Pines (loblolly, slash, shortleaf, and
Virginia) up to 2 inches in diameter breast height (dbh) can be controlled by directing the
spray at a point approximately 4 feet above ground. Vary spray mixture concentration with
size and susceptibility of the species being treated.
Best results are achieved when applications are made to young vigorously growing stems
which have not developed the thicker bark characteristic of slower growing, under -story
trees in older stands. This technique is not recommended for scrub and live oak species,
including blackjack, turkey, post, live, bluejack and laurel oaks, or bigleaf maple. Apply from
approximately 6 weeks prior to hardwood leaf expansion in the spring until approximately 2
months after leaf expansion is completed. Do not apply when snow or water prevent spray-
ing at the desired height above ground level.
Low Volume Stem Bark Band Treatment (North Central and Lake States) - To control
susceptible woody plants with stems less than 6 inches in basal diameter, mix 20 to 30 gal-
lons of Alligare Triclopyr 4 in enough oil to make 100 gallons of spray mixture. Apply with a
backpack or knapsack sprayer using low pressure and a solid cone or flat fan nozzle, Apply
the spray in a 6 to 10 inch wide band that completely encircles the stem. Spray in a manner
that completely wets the bark, but not to the point of runoff. The treatment band may be posi-
tioned at any height up to the first major branch., For best results apply the band as low as
possible. Spray mixture concentration should vary with size and susceptibility of species to
be treated. Applications may be made at any time, including winter months,
Thinline Basal Bark Treatment- To control susceptible woody plants with stems less than
6 inches in diameter, apply Alligare Triclopyr 4 either undiluted or mixed at 50-75 % vN with
oil in a thin stream to all tOrfes of the lower stems. The stream should be directed horizon-
tally to apply a narrow band around each stem or clump. Use a minimum of 2 to 15 milliliters
of Alligare Triclopyr 4 or oil mixture with Alligare Triclopyr 4 to treat single stems and from 25
to 100 milliliters to treat clumps of stems, Use an applicator metered or calibrated to deliver
the small amounts required.
i
TRICLOPYR
' aIMM ' aNMM , ilMl+
Dormant Stem Treatment
Dormant stem treatments can be used to control susceptible woody plants and vines with <
2 inch diameter stems. Plants with > 2 inch diameter stems may not be controlled and
resprouting may occur,. This application method works best in dense areas with small diam-
eter brush. Dormant stem treatments of Alligare Triclopyr 4 can also be used as a chemical
side -trim to control lateral branches of larger trees that encroach onto roadside, utility, or
other rights -of -way.
Mix 3 to 8 quarts of Alligare Triclopyr 4 in 2 to 3 gallons of crop oil concentrate or other rec-
ommended oil. Add this mixture to enough water to make 100 gallons of spray solulion. Use
continuous agitation to maintain mix. Apply in 70 to 100 gallons per acre with Radiarc, OC
or equivalent nozzles, or handgun to ensure uniform stem coverage. In western states, apply
anytime after woody plants are dormant. In other areas, apply anytime within 10 weeks of
bud break, generally February through April. Do not apply to wet or saturated bark as poor
control may result.
For improved control of black cherry, mix Alligare Triclopyr 4 with 4 quarts of Weedone 170
herbicide. When tank mixing, refer to the individual product labels for precautionary state-
ments, restrictions, recommended rates, approved uses, and a list of weeds and woody
plants controlled.
For root suckering species such as sumac, sassafras and locust, also spray the ground
under the plant to cover small root suckers which may not be visible above the soil surface,
Cut Stump Treatment
Resprouting of cut stumps of susceptible species can be controlled by mixing 20 to 30 gal-
lons of Alligare Triclopyr 4 in enough oil to make 100 gallons of spray solution. Apply at low
pressure with a backpack or knapsack sprayer; using either solid cone or flat fan nozzles.
Apply to the root collar area, sides of the stump, and the outer portion of the cut surface
including cambium. The treated area should be thoroughly wet, but do not apply to the point
of runoff. Vary spray mixture concentration according to size and susceptibility of treated
species. Applications can be made at any time of the year, including in winter months. Do
not apply when snow or water prevent application to the ground line.
Cut Stump Treatment in Western States
Resprouting of cut stumps of salt -cedar and other Tamarix spp, bigleaf maple, tanoak,
Oregon myrtle, and other susceptible species can be controlled by treating the cambium and
adjacent wood around the circumference of the cut stump to wet. Applications may be made
at any time during the year, however, reduced control may occur during periods of moisture
stress as can occur in late summer. Use an applicator which can be calibrated to deliver
small amounts.
Note: All basal bark and dormant brush treatments may be used on grazed range and per-
manent pasture land provided that no more than 2 quarts/acre/year of Alligare Triclopyr 4 is
applied. Large plants or species requiring higher rates of Triclopyr may not be completely
controlled., See the General Use Precautions section for grazing restrictions.
Chemical Mowing on Non -Cropland Sites Infested with Annual and Perennial
Broadleaf Weeds or Woody Plants
To control annual and perennial broadleaf weeds and for suppression and stem density
reduction of woody plants that occur on rights -of -way, airport grounds, petroleum tank farms
or other industrial sites, Alligare Triclopyr 4 may be applied to the cut surfaces of weed or
brush stubble under the deck of a rotary mower such as the Lucas "64" System or other
approved equipment that is designed to uniformly apply the herbicide. Apply when growing
conditions are favorable and the weeds are actively growing.
Broadleaf Weed Control: Using a minimum spray volume of 3 gallons per acre, apply the
rate recommended in the "Broadcast Applications with Ground Equipment— Broadleaf Weed
Control" section of this label. To improve weed control or broaden the spectrum of weeds
controlled, follow the label recommendations for herbicides that may be applied in tank mix
combination with Alligare Triclopyr 4.
Woody Plant Control: For suppressing and reducing stem density of woody species, use 3
to 6 quarts of Alligare Triclopyr 4 in a minimum spray volume of 5 gallons per acre. To
improve woody plant control or broaden the spectrum of woody plants controlled, follow label
recommendations for herbicides that may be applied in tank mix combination with Alligare
Triclopyr 4.
Forest Management Applications
For broadcast applications, apply the recommended rate of Alligare Triclopyr 4 in a total of
5 to 25 gallons per acre by air or in 10 t0 100 gallons per acre by ground. Use sufficient spray
volumes to provide thorough coverage of treated foliage. Use application systems designed
to prevent spray drift to off -target sites. Nozzles or additives used for drift minimization that
produce larger droplets may require higher spray volumes to provide adequate plant cover-
age.
Conifer Plant Back Interval— Conifer injury may occur if conifers are planted sooner than
1 month after Alligare Triclopyr 4 treatments at rates up to 4 quarts per acre; or if conifers
are planted sooner than 2 months after treatment with rates of 4 to 8 quarts per acre. When
herbicide tank mixtures are used for forest site preparation, use the longest plant back wait-
ing period recommended on any tank mix partner.
Forest Site Preparation (Not For Conifer Release)
Broadcast Applications in Southern States (Alabama, Arkansas, Delaware, Florida,
Georgia, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina,
Tennessee, Texas, and Virginia) - To control susceptible woody plants and broadleaf weeds,
apply 4 to 8 quarts per acre of Alligare Triclopyr 4. Alligare Triclopyr 4 may be applied at a rate
of 2 to 4 quarts per acre in a tank mix combination with labeled rates of Tordon' 101 Mixture
or Tordon' or Picloram K to broaden the spectrum of woody plants and broadleaf weeds con-
trolled, Tordon' 101 Mixture and Tordon" or Picloram K are not registered for use in California
and Florida. For grass control, Alligare Triclopyr 4, alone or in combination with Tordon' or
Picloram K or Tordon' 101 Mixture, may be tank mixed with other herbicides registered for
grass control in forests.
Refer to the individual product labels for precautionary statements, restrictions, recom-
mended rates, approved uses, and a list of weeds and woody plants controlled.
Broadcast Applications in All Other States (Except those listed as Southern States) -
To control susceptible woody plants and broadleaf weeds, apply 3 to 6 quarts per acre of
Alligare Triclopyr 4. Alligare Triclopyr 4 may be applied at a rate of 1,5 to 3 quarts per acre
in a tank mix combination with labeled rates of Tordon' 101 Mixture, Tordon` or Picloram K,
or 2,4-D low volatile ester to broaden the spectrum of woody plants and broadleaf weeds
controlled. Tordon' 101 Mixture and Tordon' or Picloram K are not registered for use in
California and Florida. For grass control, Alligare Triclopyr 4, alone or in combination with
Tordon' or Picloram K or Tordon" 101 Mixture, may be tank mixed with other herbicides reg-
istered for grass control in forests.
Refer 10 the individual product labels for precautionary statements, restrictions, recom-
mended rates, approved uses, and a list of weeds and woody plants controlled.
Site Preparation in Southern Coastal F/atwoods - To control susceptible broadleaf weeds
and woody species such as gallberry and wax -myrtle, and for partial control of saw -palmetto,
apply 2 to 4 quarts per acre of Alligare Triclopyr 4., To control species such as fetterbush, stag-
gerbush, titi, and grasses, apply Alligare Triclopyr 4 at 2 to 3 quarts per acre in a tank mix
combination with labeled rates of Arsenal Applicator's Concentrate or Imazapyr 4SL herbi-
cide. To control gallberry, wax -myrtle, broadleaf weeds, and grasses, 2 to 3 quarts per acre
of Alligare Triclopyr 4 may be applied in tank mix combination with labeled rates of Glyphosate
4 herbicide.
Apply as broadcast applications during site preparation of flat planted or bedded sites; or as
bands over the taps of beds on bedded sites, Best results will occur if applications are made
in late summer or fall. Efficacy may not be satisfactory for early season applications made
prior to August.
Note: Do not apply after planting pines.
Conifer Release Applications
Note: Conifer release applications may cause temporary damage and growth suppression
of conifers where direct contact occurs; however, injured conifers should recover and grow
normally. Over -the -top spray applications can kill pines.
Directed Sprays
To release conifers from competing hardwoods and brush such as red maple, sugar maple,
striped maple, sweetgum, red and white oaks, ash, hickory, alder, birch, aspen, pin cherry,
Ceanothus spp, blackberry, chinquapin, and poison oak, mix 4 to 20 quarts of Alligare Triclopyr
4 in enough water to make 100 gallons of spray mixture. Direct the spray onto foliage of com-
petitive hardwoods using knapsack or backpack sprayers with flat fan nozzles or equivalent.
Make applications any time after the hardwoods and brush have reached full leaf size, but
before autumn coloration. The majority of treated hardwoods and brush should be less than 6
feet in height to ensure adequate spray coverage. Care should be taken to direct the spray solu-
tion away from conifer foliage, particularly foliage of desirable pines. See the RATES Table in
the APPLICATIONS DIRECTIONS section for relationship between mixing rate, spray volume
and maximum application rate.
Mid -Rotation Understory Brush Control in Southern Coastal Flatwoods Pine Stands
(Ground Equipment Only)
Make broadcast applications of Alligare Trclopyr 4 at 2 to 4 quarts per acre for control of
broadleaf weeds and susceptible woody plant species such as gallberry and wax -myrtle. To
broaden the spectrum of woody plants controlled to include fetterbush, staggerbush, and titi,
apply 2 to 3 quarts per acre of Alligare Triclopyr 4 in a tank mix with labeled rates of Arsenal
Applicators Concentrate. Saw -palmetto will be partially controlled by use of Alligare Triclopyr 4
at 4 quarts per acre or by a tank mix of Alligare Triclopyr 4 at 2 to 3 quarts per acre with either
Arsenal Applicator's Concentrate, Imazapyr 4SL, Escort, or Metsulfuron Methyl 60DF herbi-
cide.
These mixtures should be broadcast applied over target understory brush species, but to pre-
vent injury to pines, make applications underneath the foliage of pines. For best results,
apply 30 or more gallons per acre of spray solution. Make applications in late summer or fall.
Efficacy may not be satisfactory when applications are made in early season prior to August.
Refer to the individual product labels for precautionary statements, restrictions, recom-
mended rates, approved uses, and a list of weeds and woody plants controlled,
Broadcast Applications for Conifer Release in the Pacific Northwest and California
Dormant Conifers Before Bud Swell (Excluding Pines) -To control or suppress decidu-
ous hardwoods such as vine maple, bigleaf maple, alder, scotch broom, or willow before
leaf -out or evergreen hardwoods such as madrone, chinquapin, and Ceanothus spp„ use
Alligare Triclopyr 4 at 1 to 2 quarts per acre. Diesel or fuel oil may be used as diluents. If
applying in water, add 1 to 2 gallons per acre of diesel oil, a suitable surfactant, or an oil sub-
stitute at manufacturer's recommended rates.
Conifer Plantations (Excluding Pines) Before Conifer Bud Break and After Hardwoods
Begin Growth ("Early Foliar" Hardwood Stage) —Apply Alligare Triclopyr 4 at 1 to 1.5 quarts
per acre alone or in a tank mix with 2,4-D low volatile ester herbicide in water carrier. Apply no
more than 3 pounds acid equivalent per acre from both products. After conifer bud break, these
sprays may cause more serious injury to the crop trees. Use of a surfactant may cause unac-
ceptable injury to conifers especially after bud break.
Conifer Plantations (Excluding Pines) After Conifers Harden Off in Late Summer and
While Hardwoods Are Still Growing Actively —Apply Alligare Triclopyr 4 at 1 to 1,5 quarts
per acre alone or in a tank mix with 2,4-D low volatile ester in water carrier. Apply no more
than 3 pounds acid equivalent per acre from both products. Treat as soon after conifer bud
hardening as possible so that hardwoods and brush are actively growing,. Use of oil, oil sub-
stitute, or surfactant may cause unacceptable injury to the conifers.
Broadcast Applications for Conifer Release in the Eastern United States
To release spruce, fir, red pine, and white pine from competing hardwoods such as red
maple, sugar maple, striped maple, alder, birch (white, yellow, and grey), aspen, ash, pin
cherry, and Rubus spp. and perennial and annual broadleaf weeds, apply Alligare Triclopyr
4 at 1.5 to 3 quarts per acre alone or in a tank mix with 2,4-D amine or low volatile ester.
Apply no more than 4 pounds acid equivalent per acre from both products. Make applica-
tions in late summer or early fall after conifers have formed their over -wintering buds; and
hardwoods are in full leaf prior to aulumn coloration.
Broadcast Applications for Conifer Release in the lake Stales Region
To release spruce, fir, and red pine from competing hardwoods such as aspen, birch, maple,
cherry, willow, oak, hazel, and Rubus spp. and perennial and annual broadleaf weeds, apply
Alligare Triclopyr 4 at rates of 1.5 to 3 quarts per acre.. Make applications in late summer or
early fall after conifers have formed their over -wintering buds and hardwoods are in full leaf
prior to autumn coloration.
Application Directions for Rangeland, Permanent Grass Pastures, and Conservation
ReserveProgram_,(CRP) Acres,,,
Refer to Tables 1 and 2 of this label for a list of woody plants and broadleaf weeds that are
controlled by Alligare Triclopyr 4.
Florida: Alligare Triclopyr 4 may be applied to non -irrigation ditchbanks and lencerows on
farms and ranches in addition to those uses listed in this section of the label..
Application Methods
Foliage Treatment with Ground Equipment
Use sufficient spray volume to completely and uniformly cover foliage using 10 or more gal-
lons of total spray volume per acre.. To ensure adequate coverage of plants with increased
depth and density of foliage, and particularly for treatment of woody plants, use higher spray
volumes.
High -Volume Foliage Treatment
To control susceptible woody plants, use the recommended rate of Alligare Triclopyr 4 alone
or in a tank mix to make 100 gallons of spray mixture. For rangeland and permanent pas-
ture sites, make 1 application per year and apply no more than 2 quarts of Alligare Triclopyr
4 (2 lbs. ae of triclopyr) per acre... Alligare Triclopyr 4 may be tank mixed with other herbicides
at recommended rates (see application rates table below) to control a broader spectrum of
woody plants and broadleaf weeds. Be sure to follow all applicable use directions, precau-
tions, and limitations on the respective product labels when tank mixing.
Apply sufficient spray volume to thoroughly wet all leaves, stems, and root collars. Minimize
spray drift by using the minimum spray pressure that provides adequate plant coverage with-
out forming a mist and direct sprays no higher than the top of the target plants. A drift control
additive cleared for application to growing crops may also be used to reduce spray drift. For
best results, apply when woody plants and weeds are actively growing.
Application Rates per 100 Gallons of Spray
Y1jYfgare'Yr clopyr 4�
„ Plus Yank Mix Product
"Rate (qt)
_......1.-.4..qt..................._
.....�........._.�._.�._._...
1-2 qt
Grazon` P+D specialty herbicide
4
1-2 pt
2,4-D low volatile ester herbicide
1 2
—m1-2mgt
Tordon' or Picloram 22K specialty herbicide
1-2
.--_..---------2-gI--..-..„.._.-..,..._.„._......
Reclaim" specially herbicide's
� 2
'Reclaim' is registered for use only in Arizona, Texas, Oklahoma and New Mexico
'See directions for Mesquite Control Using High Volume Foliage Treatment below.
Mesquite Control Using High Volume Foliage Treatment: To control low to moderate den-
sity mesquite infestations, apply a tank mixture of Alligare Triclopyr 4 and Reclaim' to
individual plants with a backpack or hand-held sprayer or a vehicle -mounted sprayer with
hand-held spray wand or spray gun. For individual plant treatment, use 2 quarts of Alligare
Triclopyr 4 with 2 quarts of Reclaim' per 100 gallons of total spray solution (1/2 % v/v of each
product). Apply in water or as an oil -water emulsion as described in the Mixing Directions
Section, If an oil -water emulsion is used, add the oil at a rate of 5 % of the total spray volume.
Apply as a complete spray -to -wet foliar application, including all leaves. Thorough coverage
is necessary for good results, but do not spray to the point of runoff„ This application method
works best for brush less than 8 feet tall since efficient treatment and thorough coverage of
taller brush is difficult to achieve using this method. Do not apply when mesquite foliage is
wet. The total amount of Reclaim` applied should not exceed 1 113 pints per acre. For best
results, follow information given elsewhere in this label concerning effect of environmental
conditions and application timing on control. To minimize drift, select a spray nozzle and pres-
sure that generates a coarse spray and provides good coverage. Drift may be reduced by
directing sprays no higher than the top of target plants and by using the minimum pressure
necessary to obtain plant coverage without forming a mist. If desired, a spray dye may be
added to the spray mixture to mark the treated plants.
Broadcast Application With Aerial or Ground Equipment
Brush and weed control results are influenced by environmental conditions and application
timing; for best results, apply when woody plants and weeds are actively growing. For woody
species, apply when leaf tissue is fully expanded and terminal growth has slowed after the
rapid growth period of early spring To ensure adequate foliage for herbicide absorption,
brush regrowth should be at least 4 ft, high prior to treatment. The presence of healthy
foliage at the time of application as well as adequate soil moisture before and after treatment
are important factors contributing to optimal herbicidal activity,
Apply sufficient spray volume to completely and uniformly cover foliage using 10 or more gal-
lons of total spray volume per acre for ground applications and at least 2 gallons of total
1,1:11 R1 i-me
spray volume per acre for aerial applications„. To ensure adequate coverage of plants with
increased depth and density of foliage, and particularly for treatment of woody plants, use
higher spray volumes.
Mesquite: The herbicidal response of mesquite is strongly influenced by foliage condition,
growth stage and environmental conditions., For best results, apply when soil moisture is
adequate for plant growth, the soil temperature is above 75°F at a depth of 12 to 18 inches,
and new growth foliage has turned from light to dark green. Apply within 60 days after the
75'F minimum soil temperature at the 12 to 18 inch depth has been reached ([he rate of soil
warm-up at the 12 to 1 B inch depth may vary with soil texture and drainage with coarse -tex-
tured (sandy) soils warming up sooner than fine -textured (clay) soils and dry soils warming
up more quickly than wet soils). If the application is made before mesquite foliage has turned
from light to dark green or if foliage has been injured or removed by late frost, insects, hail
or plant diseases, product performance may be adversely affected. Do not treat if mesquite
exhibits new (light green) terminal growth in response to recent heavy rainfall during the
growing season and to ensure adequate foliage for herbicide absorption, mesquite regrowth
should be at least 4 ft, high prior to treatment.
Mesquite Only
Apply Yz to 1 pint of Alligare Triclopyr 4 per acre in combination with 2/3 to 1 1/3 pints per
acre of Reclaim'. Refer to the Reclaim' label for additional treatment recommendations and
information on mesquite control. Apply as an oil/water emulsion in 4 gallons or more total vol-
ume per acre for aerial applications or in 10 gallons or more total volume per acre for ground
applications, Use no more than 1 gallon of oil per acre for both aerial and ground applica-
tion.
Mesquite and Pricklypear Cactus
For pricklypear cactus in association with mesquite, apply a lank mix of % to 1 pint of Alligare
Triclopyr 4 with 1 to 2 pints of Tordon' or Picloram 22K per acre For a higher and more uni-
form plant kill of pricklypear, use the 2 pint per acre rate of Tordon' or Picloram 22K. To
control pricklypear while providing improved control of mesquite, Tordon' or Picloram 22K
may also be applied in combination with Reclaim'. Refer to the Tordon" or Picloram 22K and
Reclaim" labels for additional information and treatment recommendations. Apply as an
oilfwater emulsion in 4 gallons or more total volume per acre for aerial applications or in 10
gallons or more total volume per acre for ground applications. Use no more than 1 gallon of
oil per acre for both aerial and ground application.
South Texas Mixed Brush (Mesquite, Pricklypear Cactus, Blackbrush, Twisted Acacia
and Granjeno)
If pricklypear is a problem, apply 1 to 2 pints of Alligare Triclopyr 4 in a tank mixture with 2
pints of Tordon` or Picloram 22K per acre. If mesquite is the prevalent species apply 1 to 2
pints of Alligare Triclopyr 4 with 2/3 to 1 1/3 pints of Reclaim" per acre. Alligare Triclopyr 4
contributes to the control of non -legume species such as granjeno and oaks; however, for
improved control if primarily woody legume species are present, apply 2 pints of Tordon' or
Picloram 22K per acre in combination with 2/3 to 1 1/3 pints of Reclaim' per acre. Refer to
the Tordon' or Picloram 22K and Reclaim' labels for additional information and treatment
recommendations. Apply as an oil/water emulsion in 4 gallons or more total volume per acre
for aerial applications or in 15 gallons or more total volume per acre for ground applications.
Use no more than 1 gallon of oil per acre for both aerial and ground application. For accept-
able brush control, an oil/water emulsion and good spray coverage is critical..
Sand Shinnery Oak Suppression
In Texas, New Mexico and Oklahoma, for suppression of shinnery oak growing on sandy
soils apply Alligare Triclopyr 4 alone at a rate of % to 2 pints per acre. Following suppres-
sion, grass response may be significant if rainfall is adequate.. Deferring grazing after
application together with proper grazing management is recommended to allow for the
reestablishment of grass stands.
Post Oak and Blackjack Oak— Regrowth Stands
Apply when oak leaves are fully developed (expanded) in late spring to early summer (May -
July). Use 2 quarts of Alligare Triclopyr 4 alone or in tank mix combination with 0.5 to 1 pint
of 2,4-D low -volatile ester herbicide per acre. Apply as an oil/water emulsion or water sur-
factant dilution in at least 5 gallons per acre total volume by fixed -wing aircraft or helicopter
or 15 to 25 gallons per acre total volume by ground equipment. Use no more than 1 gallon
of oil per acre for both aerial and ground application. For suppression only, lower rates may
be used. Control will require at least 3 consecutive treatments. Note: Because regrowth
plants have a large root mass relative to top growth, delay broadcast treatment until top
growth is at least 4 ft. tall in order for the top growth to intercept and translocate sufficient
herbicide to control the roots.
High Volume Foliage Treatment: For regrowth less than 4 ft tall, apply 2 quarts of Alligare
Triclopyr 4 per 100 gallons of water and 2 quarts of ag surfactant alone or in tank mix com-
bination with 1 gallon of Grazon' P+D or 1 quart of Tordon` or Picloram 22K. Apply to
individual plants as a high volume leaf -stem treatment using ground equipment.
Post Oak and Blackjack Oak — Mature Stands
To control mature stands (greater than 5 ft tall), apply 2 quarts of Alligare Triclopyr 4 per acre
when oak leaves are fully developed (expanded) in late spring to early summer (May -July).
When using Alligare Triclopyr 4 alone, some understory species such as winged elm, buck -
brush, tree huckleberry and ash occurring in some areas will be suppressed or defoliated but
not controlled. Where these understory species occur, control may be improved by tank mix-
ing 2 quarts of Alligare Triclopyr 4 with 1 quart of Tordon' or Picloram 22K or 4 quarts of
Grazon' P+D per acre. For best results, apply using fixed -wing aircraft or helicopter as an
oil/water emulsion in a total volume of 5 or more gallons per acre.
Other Susceptible Woody Plants
Apply 2 to 4 pints of Alligare Triclopyr 4 alone or in combination with 2 to 3 quarts of 3.8 lb/gal
2,4-D low volatile ester or amine formulation per acre. If applications are made when plants
are mature late in the summer, during drought conditions, or if difficult to control species such
as ash, choke cherry, elm, maple or oaks are prevalent on the site, use the higher rates of
Alligare Triclopyr 4, alone or with 2,4-D. For increased control of certain species, Alligare
Triclopyr 4 may also be applied in a tank mixture with Grazon' P+D or Tordon' or Picloram
22K, refer to the labels for Grazon" P+D and Tordon' or Picloram 22K for additional informa-
nuu uoivr a LLOLB
[ion and treatment recommendations. Apply in 4 gallons or more total volume per acre aeri-
ally or in 10 gallons or more total volume per acre when using ground equipment. Apply during
or after bloom for best results on blackberry. For management of kudzu, use 1 quart of Alligare
Triclopyr 4 per acre.. To achieve the desired level of control, repeat applications may be nec-
essary.
Susceptible Broadleat Weeds
When weeds are actively growing, apply 2 pints of Alligare Triclopyr 4 per acre as a broad-
cast spray in a total volume of 10 or more gallons per acre by ground equipment or in a total
volume of 2 or more gallons per acre aerially. Alligare Triclopyr 4 at a rate of 1/ to 3 pints may
be tank mixed with 1 to 2 quarts of 3.8 lb/gal 2,4-D amine or low volatile ester.
Growing Point and Leaf Base (Crown) Treatment of Yucca
Prepare a 2% vN solution of Alligare Triclopyr 4 in diesel or fuel oil (13 If oz of Alligare
Triclopyr 4 in 5 gallons of spray mixture). Thoroughly wet the center of the plant including
growing point and leaf bases to the soil surface. Complete coverage of leaves is not neces-
sary
Conservation Reserve Program (CRP) for Established Permanent Grass Stands
NOTE: Use Alligare Triclopyr 4 on CRP acres only after perennial grasses are well estab-
lished.
Broadcast Application Ground or Aerial: For small weed control, apply 1 to 2 pints of
Alligare Triclopyr 4 per acre. For deep-rooted perennial and susceptible woody species con-
trol apply up to 1 '/ quarts of Alligare Triclopyr 4 per acre. Apply in 2 gallons or more total
volume per acre for aerial applications or in 10 gallons or more total volume per acre for
ground applications.
Restrictions:
Apply no more than 1 1/2 quarts of Alligare Triclopyr 4 per acre per growing season on CRP
acres.
When applying to CRP lands, follow all applicable state and federal regulations. Follow the
most severe grazing restriction imposed by the pesticide label or by the USDA Acreage
Conservation Reserve Program. After that time period, follow local (CRP) guidelines
regarding cropping and haying restrictions. If legumes are a desired cover crop during
CRP. do not use Alligare Triclopyr 4.
Application Directions for Ornamental Turf
Refer to Table 2 for a list of broadleaf weeds controlled by Alligare Triclopyr 4.
For spot treatments, do not apply more than 2 qts. of Alligare Triclopyr 4 per acre in a single
application.
Foliar sprays should be applied during warm weather, from early spring through fall, when
weeds are actively growing. Broadleaf weeds germinate at different times. Only emerged
weeds present at the time of application will be controlled, Newly seeded turf should be
mowed 2 or 3 times before being treated. When making applications to mature plants, hard -
to -control species, or during drought conditions, use higher rates. Application under drought
conditions may provide less than desirable results. Use low pressure sprays to minimize
spray drift. Do not water for 24 hours after application.
Mixing Instructions
When Alligare Triclopyr 4 is mixed with water it forms an emulsion (not a solution) and sep-
aration may occur unless the spray mixture is agitated continuously,
Add about one-half the required amount of clean water to the spray tank, Start agitation and
add the recommended amount of Alligare Triclopyr 4. Provide moderate agitation while com-
pleting the addition of water and during application.
Reseeding Precaution: Do not reseed for 3 weeks after application. (This precaution does
not apply when bermudagrass turf is overseeded with perennial ryegrass at a minimum
reseeding of 400 lbs. per acre.)
Broadcast Treatment of Ornamental Turf
Apply 1/ to 1 quart per acre of Alligare Triclopyr 4 in enough water to provide uniform cover-
age of the target area to control actively growing broadleaf weeds growing in perennial
bluegrass, perennial ryegrass, or tall fescue. Do not use on other turfgrass species (see
General Use Precautions section of this label) unless injury can be tolerated.. To minimize
turf injury, do not treat if turf is under heat -or drought -stress and make repeat applications at
least 4 weeks apart,
Tank Mixing: To improve the spectrum of activity, Alligare Triclopyr 4 may be tank mixed at
a rate of 1/2 to 1 pint per acre with recommended rates of low volatile amine or ester formu-
lations of 2,4-D, MCPP, or other labeled postemergence broadleaf herbicides. Refer to tank
mix product labels for specific use directions, precautions, and limitations before use..
Spot Treatment of Ornamental Turf
Mix 3/8 to %a ounces of Alligare Triclopyr 4 per 1000 square feet in enough water to provide
uniform coverage of the target area and apply at any time broadleaf weeds are susceptible.
Note: Do not apply more than 2 quarts per acre or 1.5 ounces per 1000 square feet of
Alligare Triclopyr 4 in a single application.
Control of Klkuyugrass
Apply Alligare Triclopyr 4 at a rate of Y2 to 1 quart per acre. To improve activity, MSMA her-
bicide may be tank mixed with the quart per acre rate of Alligare Triclopyr 4. Three to four
additional applications at 4 to 6 week intervals may be required to achieve control of kikuyu-
grass
at 4 week intervals will be required to give adequate suppression of bermudagrass and allow
fescue or other desired turfgrass species to dominate. To improve suppression and control
of bermudagrass, 1 quart per acre of Alligare Triclopyr 4 may be tank mixed with a poste -
mergence grass herbicide registered for this use pattern. Three to four additional
applications of this tank mix at 4 week intervals should be made to achieve control,
Reseeding following application will accelerate the transilion to cool season turf (see
Reseeding Precautions above).
Table 1
Woody Plants Controlled by Alligare Triclopyr 4
Alder Dogwood Oaks Thimbleberry
Arrowwood Douglas fir Osage Orange Tree -of -Heaven (Ailanfhus)'
Ash Elderberry Pepper Vine' Trumpet Creeper'
Aspen Elm Persimmon Tulip Poplar
Bear Clover (Bearmat) Gallberry Persimmon, Eastern Twisted Acacia
Beech Gorse Pine Virginia Creeper'
Birch Granjeno Poison Ivy Wax Myrtle
Blackberry Guajillo Poison Oak Wild Rose
Blackbrush Guava' Poplar Willow
Black gum Hawthorn Salmonberry Winged elm
Boxelder Hazel Sakbush (Bracchans spp)
Brazilian Pepper Hickory Sakbush (silver mydte)'
Buckthorn Hornbeam Sell Cedar'
Cascara Huisache (suppression) Sassafras
Ceanolhus Kudzu' Scotch Broom
Cherry Locust Sumac
Chinquapin Madrone Sweelbay Magnolia
Choke Cherry Maples Sweet Gum
Cottonwood Milkweed Vine' Sycamore
Crataegus (hawthorn) Mulberry Tan Oak
'For best control, use either a basal bark or cut stump treatment.
'For complete control, retreatment may be necessary.
'Basal or dormant stem applications only
Table 2
Annual and Perennial Broadleaf Weeds Controlled
by Alligare Triclopyr 4
Black Medic Curly dock Malchweed Sulfur Cinquefoil (2)
Bull Thistle Dandelion Mustard Sweet Clover
Burdock Dogfennel Oxalis Tropical Soda Apple (3)
Canada Thistle Field Bindweed Plantain Velch
Chicory Goldenrod Purple Loosestrife Wild Carrot (Queen Anne's Lace)
Cinquefoil Ground Ivy Ragweed Wild Lettuce
Clover Lambsquarters Sericea Lespedeza (1) Wild Violet
Creeping Beggarweed Lespedeza Smartweed Yarrow
(1) Sericea lespedeza: Apply 1 to 2 pints of Alligare Triclopyr 4 per acre. For best results,
apply after maximum foliage development in the late spring to early summer, but prior to
bloom.
(2) Sulfur cinquefoil: Apply 1 to 2 pints of Alligare Triclopyr 4 per acre, For best results,
apply to plants in the rosette stage.
(3) Tropical soda apple: When plants reach the first flower stage, apply 2 pints of Alligare
Triclopyr 4 per acre. For best results, apply using ground equipment in a total spray vol-
ume of 40 gallons per acre. To provide more complete wetting and coverage of the
foliage, an agricultural surfactant may be added at the manufacturer's recommended
rate„ To control sparse plant stands, use spot treatments. For spot treatment use a 1 to
1.5 % solution of Alligare Triclopyr 4 in water (1 to 1 1/2 gallons of Alligare Triclopyr 4 in
100 gallons total spray mixture) and spray the entire plant to completely wet the foliage.
In Florida, control of tropical soda apple may be improved by using the following man-
agement practices:
Mow plants to a height of 3 inches every 50 to 60 days or whenever they reach flow-
ering. Continue mowing on this schedule through April.
In late May to June (50 to 60 days alter the April mowing), apply a broadcast treat-
ment of Alligare Triclopyr 4.
To control any remaining plants or to thin stands of plants that germinate following a
broadcast treatment, use spot treatments.
Suppression of Bermudagrass
Apply Alligare Triclopyr 4 at the rate of 1 quart per acre. Three to four additional applications
blNlll r V UIIIIU
NNIUfp '
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE: Store above 26°F or agitate before use.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product (that cannot
used according to label instructions) may be disposed of on site or at an approved wits
fidsrposal facility.
CONTAINER DISPOSAL:
(NONREFILLABLE CONTAINERS:]
NunroN ldabld container. Do not reuse or refill this container. Offerfor recycling, if lav,,Aaalb
T6pha rinse container (or equivalent) promptly after emptying.
ftnrofilh Wo container 4 5 gallons): Triple rinse as follows: Empty the remaining (X
laaats into application equipment or a mix tank and drain for 10 seconds after the 1h
begins to drip. Fill the container YA full with water and recap, Shake for 10 seconds. Far
Nnsalex into application equipment or a mix tank or store rinsate for later use or cfG.apust
DrMn for 10 seconds after the flow begins to drip. Repeat this procedure two more lima
(NormaaelillaabW > 5 gallons): Triple rinse as follows: Empty the remaining contents Ir
a pplicru,lln�n equipment or a mix tank. Fill the container Ya full with water. Replace and tuft:
em closures. Tip container on its side and roll it back and forth, ensuring at least as
cornpal'ete revolution, for 30 seconds. Stand the container on its end and tip it back da
forth several times. Turn the container over onto its other end and tip it back and kc
airworaab times.. Empty the rinsate into application equipment or a mix tank or store 0nm
for later use or disposal. Repeat this procedure two more times.
IREFILLABLECONTAINERS:]
Refillable container. Refill this container with pesticide only. Do not reuse this caontah
for any other purpose. Cleaning the container before final disposal is the oosprrnsihibly
tho person disposing of the container. Cleaning before refilling is the responsibility of I
To clean the container before final disposal, empty the remaining contents from this con-
tainer into application equipment or mix tank. Fill the container about 10 percent full with
v4 ar(M AgiNI N vigowaausly or rrurlto Ail ate waatea' with the pump for 2 minutes. Pour or pump
6nnaaw unka alapakCa'atlba oqulptni("0 at alrasame collection system. Repeat this rinsing pro-
codure two more times.
LIMITED WARRANTY, TERMS or SALE,
AND LIMITATION OF LIABILITY
Upon purchase or use of this product, purchaser and user agree to the following terms:
Warranty: Alligare, LLC (the Company) warrants that this product conforms to the chemical
description on the label in all material respects and is reasonably fit for the purpose referred
to in the directions for use, subject to the exceptions noted below, which are beyond the
Company's control. The Company makes no other representation or warranty, express or
implied, concerning the product, including no implied warranty of merchantability or fitness
for a particular purpose. No such warranty shall be implied by law, and no agent or repre-
sentative is authorized to make any such warranty on the Company's behalf.
Terms of Sale: The Company's directions for use of this product must be followed careful-
ly. It is impossible to eliminate all risks inherently associated with use of this product. Crop
injury, ineffectiveness or other unintended consequences may result because of such fac-
tors as weather conditions, presence of other materials, and the manner of use or application
(including failure to adhere to label directions), all of which are beyond the Company's con-
trol. To the extent consistent with applicable law, all such risks are assumed by the user
(vp fa,llobt of LI�III'it: To the extent consistent with applicable law, the exclusive remedy
against the Company for any cause of action relating to the handling or use of this product
is a claim for damages, and in no event shall damages or any other recovery of any kind
exceed the price of the product which caused the alleged loss, damage, injury or other claim.
To the extent consistent with applicable law, under no circumstances shall the Company be
liable for any special, indirect, incidental or consequential damages of any kind, including
loss of profits or income, and any such claims are hereby waived. Some states do not allow
the exclusion or limitation of incidental or consequential damages,.
The Company and the seller offer this product, and the purchaser and user accept this prod-
uct, subject to the foregoing warranty, terms of sale and limitation of liability, which may be
varied or modified only by an agreement in writing signed on behalf of the Company by an
authorized representative.
"Trademark of Dow AgroSciences
EPA 20080826
Manufactured by:
ALBAUGHy
1525 NE 36th Street
Ankeny, IA 50021
FOR CHEMICAL SPILL,
LEAK, FIRE, OR
EXPOSURE, CALL
CHEMTREC (800) 424-9300
AD092611
i 4a
U1 y tar' Pro-dm-,
AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN
STEMS, EXPOSED NON -WOODY ROOTS OR FRUIT OF
CROPS, DESIRABLE PLANTS AND TREES, BECAUSE
SEVERE INJURY OR DESTRUCTION MAY RESULT.
Read the "CONDITIONS OF SALE AND WARRANTY" statement at the end of the label before buy-
ing or using this product. If terms are not acceptable, return at once unopened.
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl)glycine,
in the form of its isopropylamine salt ............................ 41.0%
OTHER INGREDIENTS ......................................... 59.0%
TOTAL.......................................................100.0%
*Contains 480 grams per litre or 4 pounds per U.S. gallon of the active ingredient,
glyphosate, in the form of its isopropylamine salt.
Equivalent to 356 grams per litre or 3 pounds per U.S. gallon of the acid, glyphosate.
EPA Reg. No. 42750-61 EPA Est. No. 42750-MO-001
e
JU j I 5_1 `-,
FIRST AID
IF IN EYES: * Hold eye open and rinse slowly and gently with water for
15-20 minutes. Remove contact lenses, if present, after the first
5 minutes, then continue rinsing eye.
Call a poison control center or doctor for treatment advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control
center or doctor, or going for treatment. You may also contact 1-800-424-9300
qk&ar, for emergency medical treatment information.
ByAlbaugh, Inc.
Premier Supplier of off -patent Crop Protection Products
See inside booklet for additional PRECAUTIONARY STATEMENTS.
TABLE OF CONTENTS
SECTION
DESCRIPTION
PAGE
1.0
INGREDIENTS
1
2.0
EMERGENCY PHONE NUMBERS
1
3.0
PRECAUTIONARY STATEMENTS
3
3.1
Hazards To Humans & Domestic Animals
3
3.2
Personal Protective E ui ment PPE & User Safely Recommendations
3
3.3
Environmental Hazards
3
3.4
Physical & Chemical Hazards
3
3.5
A ricultural Use Requirements
4
3,61
Non-agricultural Use Ret uirermits
4
4.0 STORAGE & DISPOSAL 4
5.0 PRODUCT INFORMATION 5
6.0
WEED RESISTANCE MANAGEMENT
5
6.1
Weed Management Directions
5
6.2
Management Directions For Glyphosale Resistance Biot 'yes
6
7.0
MIXING
6
7.1
Mixing With Water
6
7.2
Tank Mixing Procedure
6
7.3
Mixing For Hand -Held Sprayers
6
7.4
Surfactants
7
7.5
Colorants or Dyes
7
7.6
Drift Control Additives
7
8.0
APPLICATION EQUIPMENT & TECHNIQUES
7
8.1
Aerial E ui ment & Spray Drift Management
7
8.2
Ground Broadcast Equipment
9
8.3
Hand -Held Or High -Volume Equipment
9
8.4
Selective Equipment
10
8.5
Injection Equipment
11
8.6
CDA Equipment
11
9.0
NON -CROP USES AROUND THE FARMSTEAD
11
9.1
General Weed Control, Trim -and -Ede & Bare Ground
11
9.2
Greenhouse/Shadehouse
11
9.3
Chemical Mowing
12
9.4
Cut Stumps
12
9.5
Habitat Mana emit
12
10.0
FORESTRY, INDUSTRIAL, TURF & ORNAMENTAL
13
10.1
Forestry Site Preparation
13
10.2
Noncro Areas & Industrial Sites
14
10.3
Injection & Frill Moogy Brush & Trees
15
10.4
Hollow -Stem Injection
15
10.5 Ornamentals, Plant Nurseries & Christmas Trees
16
10.6 Parks, Recreational & Residential Areas
16
10.7 Railroads
17
10.8 Roadsides
18
10.9 Utilily Sites
19
(continued)
TABLE OF CONTENTS (continued
SECTION DESCRIPTION PAGE
11.0 ANNUAL WEEDS RATE TABLE (ALPHABETICAL BY SPECIES) 20
11.1 Annual Weeds — Rates For 10 To 40 G a 23
11.2 Annual Weeds — Hand -Held Or High -Volume Equipment 23
12.0 PERENNIAL WEEDS RATE TABLE (ALPHABETICAL BY SPECIES) 23
12.1 Bromus Species and Medusahead 28
13.0 WOODY BRUSH & TREES RATE TABLE (ALPHABETICAL BY SPECIES) 28
14.0 WARRANTY STATEMENT 30
3.0 — PRECAUTIONARY STATEMENTS
3.1 — HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Causes moderate eye irritation. Avoid contact with eyes or clothing. Wash thoroughly with soap and water after handling.
DOMESTIC ANIMALS: This product is considered to be relatively nontoxic to dogs and other domestic animals; however, ingestion of this product or large amounts of freshly
sprayed vegetation may result in temporary gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed, provide the animal with plenty of fluids
to prevent dehydration. Call a veterinarian if symptoms persist for more than 24 hours.
3.2 — PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and other handlers must wear:
1. Long-sleeved shirt and long pants,
2. Shoes plus socks.
Follow manufacturer's instructions for cleaning/maintaining PPE (Personal Protective Equipment). If no such instructions for washables exists, use detergent and hot water.
Keep and wash PPE separately from other laundry.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in Worker Protection Standard (WPS) for agricultural pesticides
[40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
3.3 — ENVIRONMENTAL HAZARDS
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when cleaning
equipment or disposing of equipment washwaters.
3.4 — PHYSICAL OR CHEMICAL HAZARDS
Spray solutions of this product should be mixed, stored and applied using only stainless steel, aluminum, fiberglass, plastic or plastic -lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAIN-
ERS OR SPRAY TANKS. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas which may form a highly combustible
gas mixture. This gas mixture could flash or explode, causing serious personal injury, if ignited by open flame, spark, welder's torch, lighted cigarette or other ignition
source.
Read the entire label before using this product. Use only according to label instructions.
Read the "CONDITIONS OF SALE AND WARRANTY" statement at the end of the label before buying or using. If terms are not acceptable, return at once unopened.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
This product can only be used in accordance with the Directions for Use on this label or in separately published Albaugh, Inc. supplemental labeling. Supplemental labeling
can be found on the internet at www,,cd,ms,.net or Albaugh, Inc. representative.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application.
For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulations.
3.5 - AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection
of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination,
notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective
equipment (PPE), and restricted -entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted -entry interval (REI) of 4 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated,
such as plants, soil, or water, is:
1. Coveralls
2. Waterproof gloves
3. Shoes plus socks.
3.6 - NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part
170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries or greenhouses.
Keep people and pets off treated areas until spray solution has dried.
Do not contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Keep container closed to prevent spills and contamination. Store above 10°F (-121C) to keep product from crystallizing. Crystals will settle
to the bottom. If allowed to crystallize, place in a warm room 68°F (20°C) for several days to redissolve and roll or shake container or recirculate in mini -bulk or
bulk container to mix well before using.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product that cannot be used or chemically reprocessed should be disposed of in a landfill approved
for pesticide disposal or in accordance with applicable Federal, State or local procedures. Emptied container retains vapor and product residue. Observe all labeled
safeguards until container is cleaned, reconditioned, or destroyed.
CONTAINER HANDLING: (See the Net Contents section on the container to determine if it is non -refillable or refillable.) APPROPRIATE BOX MUST
BE CHECKED.
Br�rti-rt.BpNNrP_parplta�rt..( arttl g6lNl�pN), Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. FNII the container
1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds
after the flow begins to drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip.
Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container,
and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.
Offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by State and local authorities, by burning. If burned,
stay out of smoke.
Nr�rp f 'f�NNahNo gt?11t<�srwpr ,.( _ ggl1p1j);, Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. FNII the container 1/4 full with water. Replace and tighten closures.
Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth
several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store
rinsate for later use or disposal. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip.
Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container,
and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.
Offer for recycling, if available, or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by State and local authorities, by burning. If burned,
stay out of smoke.
bgVp,()qjgo,grmsm Refillable container. Refill this container with glyphosate only. Do not reuse this container for any other purpose.
When this container is empty, replace the cap and seal all openings that have been made during usage and return the container to the point of purchase, or to an
alternate location designated by the manufacturer at the time of purchase of this product. If not returned, clean the empty container and offer for recycling, if available.
Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller.
To clean the container before final disposal, empty the remaining contents from the container into application equipment or mix tank. FNII the container about 10
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection
system. Repeat this rinsing process two more times.
If the container cannot be refilled, offer for recycling, if available, or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by State and local
authorities, by burning. If burned, stay out of smoke.
5.0 - PRODUCT INFORMATION
PRODUCT DESCRIPTION: This product is a post -emergent, systemic herbicide with no soil residual activity. It is generally non -selective and gives broad-spectrum control
of many annual weeds, perennial weeds, woody brush and trees. It is formulated as a water-soluble liquid. No additional surfactants, additives containing surfactant,
buffering agents or pH adjusting agents are needed or recommended. It may be applied through most standard industrial or field -type sprayers after dilution and thorough
mixing with water or other carriers according to label instructions.
TIME TO SYMPTOMS: This product moves through the plant from the point of foliage contact to and into the root system. Visible effects on most annual weeds occur
within 2 to 4 days, but on most perennial weeds may not occur for 7 days or more. Extremely cool or cloudy weather following treatment may slow activity of this product
and delay development of visual symptoms. Visible effects are a gradual wilting and yellowing of the plant which advances to complete browning of aboveground growth
and deterioration of underground plant parts.
STAGE OF WEEDS: Annual weeds are easiest to control when they are small. Best control of most perennial weeds is obtained when treatment is made at late growth
stages approaching maturity. Refer to the annual, perennial, woody brush and trees rate tables for recommendations for specific weeds.
Always use the higher rate of this product per acre within the recommended range when weed growth is heavy or dense or weeds are growing in an undisturbed (non -cultivated) area.
Do not treat weeds under poor growing conditions such as drought stress, disease or insect damage, as reduced weed control may result. Reduced results may also occur
when treating weeds heavily covered with dust.
CULTURAL CONSIDERATIONS: Reduced control may result when applications are made to annual or perennial weeds that have been mowed, grazed, or cut, and have
not been allowed to regrow to the recommended stage for treatment.
RAINFASTNESS: Heavy rainfall soon after application may wash this product off of the foliage and a repeat application may be required for adequate control.
SPRAY COVERAGE: For best results, spray coverage should be uniform and complete. Do not spray weed foliage to the point of runoff.
MODE OF ACTION: The active ingredient in this product inhibits an enzyme found only in plants that is essential to formation of specific amino acids.
NO SOIL ACTIVITY: Weeds must be emerged at the time of application to be controlled by this product. Weeds germinating from seed after application will not be
controlled. Unemerged plants arising from unattached underground rhizomes or root stocks of perennials will not be affected by the herbicide and will continue to grow.
BIOLOGICAL DEGRADATION: Degradation of this product is primarily a biological process carried out by soil microbes.
TANK MIXING: This product does not provide residual weed control. For subsequent residual weed control, follow a label -approved herbicide program. Read and carefully
observe the cautionary statements and all other information appearing on the labels of all herbicides used. Use according to the most restrictive label directions for each
product in the mixture.
Buyer and all users are responsible for all loss or damage in connection with the use or handling of mixtures of this product with herbicides or other materials that are not
expressly recommended in this label. Mixing this product with herbicides or other materials not recommended on this label may result in reduced performance.
ANNUAL MAXIMUM USE RATE: Except as otherwise specified in a food crop section of this label, the combined total of all treatments must not exceed 8 quarts of this
product per acre per year. For non-food/non-crop uses, the combined total of all treatments must not exceed 10.6 quarts of this product per acre per year. The maximum
use rates stated throughout this product's labeling apply to this product combined with the use of all other herbicides containing glyphosate or sulfosate as the active
ingredient, whether applied as mixtures or separately. Calculate the application rates and ensure that the total use of this and other glyphosate- or sulfosate-containing
products does not exceed stated maximum use rate.
NOTE: Use of this product in any manner not consistent with this label may result in injury to persons, animals or crops, or other unintended consequences. Keep container
closed to prevent spills and contamination.
6.0 - WEED RESISTANCE MANAGEMENT
Glyphosate, the active ingredient in this product, is a Group 9 herbicide. Target site resistance to Group 9 herbicides is rare. Any weed population may contain plants
naturally resistant to Group 9 herbicides. Weed species resistant to Group 9 herbicides may be effectively managed utilizing another herbicide from a different Group or
using other cultural practices or mechanical practices.
6.1 - WEED MANAGEMENT DIRECTIONS
To minimize the occurrence of glyphosate-resistant biotypes, observe the following general weed management recommendations:
• Scout your fields before and after herbicide applications.
• Start with a clean field, use either a burndown herbicide application or tillage.
• Control weeds early when they are relatively small.
• Add other herbicides (e.g., a selective and/or a residual herbicide) and cultural practices (e.g., tillage or crop roatation) where appropriate.
• One method of adding other herbicides into a continuous Roundup Ready system is to rotate to other Roundup Ready crops.
• Utilize the recommended label rate for the most difficult to control weed in your field. Avoid tank mixtures with other herbicides that reduce this product's efficacy
(through antagonism), or tank mixture recommendations that encourage application rates of this product below the label recommendations.
• Control weed escapes and prevent weeds from setting seeds.
• Clean equipment before moving from field to field to minimize the spread of weed seed or plant parts.
• Use new commercial seed that is as free of weed seed as possible.
• Report any incidence of repeated non-performance of this product on a particular weed to your Albaugh, Inc. representative, local retailer, or County Extension agent.
6.2 — MANAGEMENT DIRECTIONS FOR GLYPHOSATE RESISTANCE BIOTYPES
NOTE: Appropriate testing is critical in order to determine if a weed is resistant to glyphosate. Contact your Albaugh, Inc. representative to determine if resistance has been
confirmed to any particular weed biotype in your area, or visit on the Internet vyyo ?.t pq rgpi ,fpgc gripr9,gpnrgf4 ,.q4 m or wwor yegptf t(r p r .For more information see
the "ANNUAL WEEDS RATE" section and "PERENNIAL WEEDS RATE" section of this label.
Control directions for biotypes confirmed as resistant to glyphosate are made available on separately published supplemental labeling or fact sheets for this product and
can be obtained from your local retailer or Albaugh, Inc. representative.
Since the occurrence of new glyphosate-resistant weeds cannot be determined until after product use and scientific confirmation, Albaugh, Inc. is not responsible for any
losses that may result from the failure of this product to control glyphosate-resistant weed biotypes.
The following good agronomic practices are recommended to reduce the spread of confirmed glyphosate-resistant biotypes:
• If a naturally occurring resistant biotype is present in your field, this product should be tank -mixed or applied sequentially with an appropriately labeled herbicide with
a different mode of action to achieve control
• Cultural and mechanical control practices (e.g., crop rotation or tillage) may also be used as appropriate.
• One method for adding other herbicides into a continuous Roundup Ready system is to rotate to other Roundup Ready corps.
• Scout treated fields after herbicide applications and control escaping weeds including resistant biotypes before they set seed.
• Thoroughly clean equipment before leaving fields known to contain resistant biotypes.
7.0 — MIXING
Clean sprayer parts immediately after using this product by thoroughly flushing with water.
NOTE: REDUCED RESULTS MAY OCCUR IF WATER CONTAINING SOIL IS USED, SUCH AS VISIBLY MUDDY WATER OR WATER FROM PONDS AND DITCHES THAT IS NOT CLEAR.
7.1 — MIXING WITH WATER
This product mixes readily with water. Mix spray solutions of this product as follows: Fill the mixing or spray tank with the required amount of water. Add the recommended
amount of this product near the end of the filling process and mix well. Use caution to avoid siphoning back into the carrier source. Use approved anti -back -siphoning
devices where required by state or local regulations. During mixing and application, foaming of the spray solution may occur. To prevent or minimize foam, avoid the use
of mechanical agitators, terminate by-pass and return lines at the bottom of the tank and, if needed, use an approved anti -foam or defoaming agent.
7.2 — TANK MIXING PROCEDURE
Mix labeled tank mixtures of this product with water as follows:
1. Place a 20- to 35-mesh screen or wetting basket over filling port.
2. Through the screen, fill the spray tank one-half full with water and start agitation.
3. If ammonium sulfate is used add it slowly through the screen into the tank. Continue agitation. Ensure that dry ammonium sulfate is completely dissolved in the spray
tank before adding other products.
4. If a wettable powder is used, make a slurry with the water carrier, and add it SLOWLY through the screen into the tank. Continue agitation.
5. If a flowable formulation is used, premix one part flowable with one part water. Add diluted mixture SLOWLY through the screen into the tank. Continue agitation.
6. If an emulsifiable concentrate formulation is used, premix one part emulsifiable concentrate with two parts water. Add diluted mixture slowly through the screen into
the tank. Continue agitation.
7. Continue filling the spray tank with water and add the required amount of this product near the end of the filling process.
8. Add individual formulations to the spray tank as follows: wettable powder, flowable, emulsifiable concentrate, drift control additive and water soluble liquid.
Maintain good agitation at all times until the contents of the tank are sprayed. If the spray mixture is allowed to settle, thorough agitation is required to resuspend the
mixture before spraying is resumed.
Keep by-pass line on or near the bottom of the tank to minimize foaming. Screen size in nozzle or line strainers should be no finer than 50 mesh.
Always predetermine the compatibility of labeled tank mixtures of this product with water carrier by mixing small proportional quantities in advance.
Refer to the "TANK MIXING" section of "GENERAL INFORMATION' for additional precautions.
7.3 — MIXING FOR HAND-HELD SPRAYERS
Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table:
Spray Solution
Desired Amount of Gly Star Pro
Volume 1/2% 1% 1-1/2% 2% 5%
10%
1 Gal 2/3 oz 1-1/3 oz 2 oz 2-2/3 oz 6-1/2 oz
13 oz
25 Gal 1 pt 1 qt 1-112 qt 2 qt 5 qt
10 qt
100 Gal 2 qt 1 gal 1-1/2 gal 2 gal 5 gal
10 gal
2 tablespoons =1 fluid ounce
For use in knapsack sprayers, it is suggested that the recommended amount of this product be mixed with water in a larger container. Fill sprayer with the mixed solution.
7.4 - SURFACTANTS
Additional surfactants labeled for use with herbicides may be used. Do not reduce application rates of this herbicide when adding surfactants. Read and carefully observe
cautionary statements and other information appearing on the additives label.
7.5 - COLORANTS OR DYES
Agriculturally approved colorants or marking dyes may be added to this product. Colorants or dyes used in spray solutions of this product may reduce performance,
especially at lower rates or dilutions. Use colorants or dyes according to the manufacturer's recommendations.
7.6 - DRIFT CONTROL ADDITIVES
Drift control additives may be used with all equipment types, except wiper applicators, sponge bars and CDA equipment. When a drift control additive is used, read and
carefully observe the cautionary statements and all other information appearing on the additive label.
NOTE: The use of drift control additives can affect spray coverage which may result in reduced performance.
8.0 - APPLICATION EQUIPMENT AND TECHNIQUES
Do not apply this product through any type of irrigation system.
This product may be applied with the following application equipment:
• Aerial — Fixed Wing and Helicopter
• Ground Broadcast Spray — Boom or boomless systems, pull -type sprayer, floaters, pick-up sprayers, spray coupes and other ground broadcast equipment.
• Hand -Held or High -Volume Spray Equipment — Knapsack and backpack sprayers, pump -up pressure sprayers, handguns, handwands, mistblowers`, lances and other
hand-held and motorized spray equipment used to direct the spray onto weed foliage.
• Selective Equipment — Shielded and hooded sprayers, wiper applicators and sponge bars.
• Injection Systems — Aerial or ground injection sprayers.
• Controlled Droplet Applicator (CDA) — Hand-held or boom -mounted applicators which produce a spray consisting of a narrow range of droplet sizes.
*This product is not registered in California or Arizona for use in mistblowers.
APPLY THESE SPRAY SOLUTIONS IN PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE OF DELIVERING DESIRED VOLUMES.
8.1 - AERIAL EQUIPMENT
DO NOT APPLY THIS PRODUCT USING AERIAL SPRAY EQUIPMENT EXCEPT UNDER CONDITIONS AS SPECIFIED WITHIN THIS LABEL. FOR AERIAL APPLICATION IN CALIFORNIA
AND ARKANSAS, REFER TO INSTRUCTIONS SPECIFIC TO THOSE STATES.
This product plus dicamba tank mixtures may not be applied by air in California.
Use the specified rates of this herbicide in 3 to 15 gallons of water per acre unless otherwise specified on this label. Unless otherwise specified, do not exceed 1 quart
per acre. Aerial applications of this product may be made in annual cropping conventional tillage systems, fallow and reduced tillage systems and preharvest applications.
Refer to the individual use area sections of this label for recommended volumes and application rates.
Ensure uniform application — To avoid streaked, uneven or overlapped application, use appropriate marking devices.
AERIAL SPRAY DRIFT MANAGEMENT
AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF THE APPLICATOR. The interaction of many equipment- and weather -related factors determine
the potential for spray drift. The applicator is responsible for considering all these factors when making decisions.
The following drift management requirements must be followed to avoid off -target movement from aerial applications to agricultural field crops. These requirements do
not apply to forestry applications, public health uses or to applications using dry formulations.
1. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor.
2. Nozzles must always point backward parallel with the airstream and never be pointed downwards more than 45 degrees.
Where states have more stringent regulations, they must be observed.
INFORMATION ON DROPLET SIZE
The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage
and control. Applying larger droplets reduces drift potential, but will not prevent drift if applications are made improperly, or under unfavorable environmental conditions
(see "Wind", "Temperature and Humidity", and "Temperature Inversions" sections of this label).
CONTROLLING DROPLET SIZE
• Volume — Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets.
• Pressure — Do not exceed the nozzle manufacturer's recommended pressures. For many nozzle types lower pressure produces larger droplets. When higher flow rates
are needed, use higher flow rate nozzles instead of increasing pressure.
• Number of Nozzles — Use the minimum number of nozzles that provide uniform coverage.
• Nozzle Orientation — Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientations and is the recommended
practice. Significant deflection from horizontal will reduce droplet size and increase drift potential.
(continued)
• Nozzle Type — Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using
low -drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift.
• Boom Length — For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width.
• Application Height — Applications must not be made at a height greater than 10 feet above the top of the target plants unless a greater height is required for aircraft
safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind.
SWATH ADJUSTMENT
When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and downwind edges of the field, the applicator must compensate
for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase with increasing drift potential (higher wind, smaller drops, etc.).
WIND
Drift potential is lowest between wind speeds of 2-10 mph. However, many factors, including droplet size and equipment type determine drift potential at any given speed.
Application must be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator
should be familiar with local wind patterns and how they affect spray drift.
TEMPERATURE AND HUMIDITY
When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when
conditions are both hot and dry.
TEMPERATURE INVERSIONS
Applications must not occur during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing, which causes small sus-
pended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperature
inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun
sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement
of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an
inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing.
SENSITIVE AREAS
The pesticide must only be applied when the potential for drift to adjacent sensitive areas (e.g., residential areas, bodies of water, known habitat for threatened or endan-
gered species, non -target crops) is minimal (e.g., when wind is blowing away from the sensitive areas).
Avoid direct application to any body of water.
Aircraft Maintenance —Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this product accumulated during spraying or from
spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL SURFACES MAY RESULT IN CORROSION AND POSSIBLE FAILURE OF THE PART. LANDING GEAR ARE
MOST SUSCEPTIBLE. The maintenance of an organic coating (paint), which meets aerospace specification MIL-C-38413, may prevent corrosion.
FOR AERIAL APPLICATION IN CALIFORNIA ONLY
Aerial applications of this product are allowed in the following situations:
1. In fallow and reduced tillage systems prior to the emergence or transplanting of labeled crops.
2. In alfalfa and pasture renovation applications.
3. Over -the -top applications in Roundup Ready® corn and cotton.
4. Preharvest in alfalfa, corn, cotton, wheat, Roundup Ready® corn and Roundup Ready® cotton.
Do not plant subsequent crops other than those listed in the label booklet for 30 days following application.
When tank mixing this product with 2,4-D for aerial applications, only 2,4-D amine formulations may be used. This tank mixture may be used for fallow and reduced tillage
systems and alfalfa and pasture renovation applications only.
DO NOT EXCEED A MAXIMUM RATE OF 2 QUARTS PER ACRE OF THIS PRODUCT WHEN MAKING APPLICATIONS BY AIR IN FALLOW AND REDUCED TILLAGE SYSTEMS AND
ALFALFA AND PASTURE RENOVATION APPLICATIONS.
DO NOT EXCEED A MAXIMUM RATE OF 1 QUART PER ACRE OF THIS PRODUCT WHEN MAKING APPLICATIONS BY AIR IN ALFALFA, CORN, COTTON, WHEAT, ROUNDUP READY°
CORN AND ROUNDUP READY® COTTON PRIOR TO HARVEST. THIS RESTRICTION ALSO APPLIES TO OVER -THE -TOP APPLICATIONS IN ROUNDUP READY® CORN AND COTTON.
Aerial Equipment
Use the recommended rates of this product in 3 to 15 gallons of water per acre.
Use the following guidelines when aerial applications are made near crops or desirable perennial vegetation after bud break and before total leaf drop, and/or near other
desirable vegetation or annual crops.
1. Do not apply within 100 feet of all desirable vegetation or crop(s).
2. If wind up to 5 miles per hour is blowing toward desirable vegetation or crop(s), do not apply within 500 feet of the desirable vegetation or crop(s).
3. Winds blowing from 5 to 10 miles per hour toward desirable vegetation or crop(s) may require buffer zones in excess of 500 feet.
4. Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist.
FOR AERIAL APPLICATION IN FRESNO COUNTY, CALIFORNIA
(Only From February 15 through March 31 Only)
Applicable Area:
The area contained inside the following boundaries within Fresno County, California.
North: Fresno County line
South: Fresno County line
East: State Highway 99
West: Fresno County line
General Infortnation:
Always read and follow the label directions and precautionary statements for all products used in the aerial application.
Observe the following directions to minimize off -site movement during aerial application of this product. Minimization of off -site movement is the responsibility of the
grower, Pest Control Advisor and aerial applicator.
Written Recommendations:
A written recommendation MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural Commissioner 24 hours prior to the application. This
written recommendation MUST state the proximity of surrounding crops, and that conditions of each manufacturer's product label and this label have been satisfied.
Aerial Applicator Training and Equipment:
Aerial application of this product is limited to pilots who have successfully completed a Fresno County Agricultural Commissioner and California Department of Pesticide
Regulation approved training program for aerial application of herbicides. All aircraft must be inspected, critiqued in flight and certified at a Fresno County Agricultural
Commissioner approved fly -in. Test and calibrate spray equipment at intervals sufficient to ensure that proper rates of herbicides and adjuvants are being applied during
commercial use. Applicator must document such calibrations and testing. Demonstration of performance at Fresno County Agricultural Commissioner approved fly -ins
constitutes such documentation, or other written records showing calculations and measurements of flight and spray parameters acceptable to the Fresno County
Agricultural Commissioner.
Applications at Night:
Do not apply this product by air earlier than 30 minutes prior to sunrise and/or later than 30 minutes after sunset without prior permission from the Fresno County
Agricultural Commissioner.
NOTE: For aerial application from April 1 through February 14, refer to the "For Aerial Application in California Only" section of this label.
FOR AERIAL APPLICATION IN ARKANSAS ONLY
AVOID DRIFT. DO NOT APPLY INTO STILL AIR WHERE THERE IS A TEMPERATURE INVERSION LAYER LOW ENOUGH FOR FINE SPRAY PARTICLES TO BECOME SUSPENDED
AND MOVE OUTSIDE THE TARGET AREA WHEN THE INVERSION LAYER MOVES. DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION THAT FAVORS
DRIFT. DRIFT IS LIKELY TO CAUSE DAMAGE TO ANY VEGETATION CONTACTED. TO PREVENT INJURY TO ADJACENT DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES
MUST BE MAINTAINED.
Use the specified rate of this product in 3 to 15 gallons of water per acre. Use sufficient carrier volume and appropriate equipment set-up to form droplets large enough
to avoid drift potential. Coarse droplets in the 300 to 500 (VIVID) micron range are recommended.
Applications should typically be made with the nozzle release point at 8 to 15 feet above the top of the target plants unless a greater height is required for aircraft safety.
The distance of the outermost nozzles on the boom must not exceed 75% of the length of the wingspan or rotor. In many cases, reducing this distance to 65% of the length
of the wingspan or rotor will improve drift control without affecting the swath width.
Nozzles must always discharge backward parallel with the air stream and never discharge downwards more than 45 degrees on fixed wing aircraft or forward of the
prevailing airflow on rotary winged aircraft. Avoid the use of nozzles with wide-angle discharge.
Do not apply this product when wind speeds are in excess of 10 miles per hour.
Do not apply when there is a low-level inversion where fine spray particles could be suspended in still air and move outside the target area when the inversion layer moves.
These conditions may occur when wind speeds are less than 2 mph.
Use the following guidelines when applications are made near crops or other desirable vegetation:
1. Do not apply within 100 feet of any desirable vegetation or crops.
2. If wind up to 5 miles per hour is blowing toward desirable vegetation or crops, do not apply within 500 feet upwind of the desirable vegetation or crops.
3. Winds blowing from 5 to 10 miles per hour toward desirable vegetation or crops will likely require buffer zones in excess of 500 feet.
8.2 - GROUND BROADCAST EQUIPMENT
Use the specified rates of this product in 3 to 40 gallons of water per acre as a broadcast spray unless otherwise specified. As density of weeds increases, spray volume
should be increased within the recommended range to ensure complete coverage. Carefully select proper nozzles to avoid spraying a fine mist. For best results with ground
application equipment, use flat fan nozzles. Check for even distribution of spray droplets.
8.3 - HAND-HELD AND HIGH -VOLUME EQUIPMENT
Apply to foliage of vegetation to be controlled. For applications made on a spray -to -wet basis, spray coverage should be uniform and complete. Do not spray to the point
of runoff. Use coarse sprays only. Use coarse sprays only. For recommended rates and timing, refer to the "ANNUAL WEEDS — HAND-HELD OR HIGH -VOLUME EQUIPMENT"
section of this label.
8.4 - SELECTIVE EQUIPMENT
This product may be applied through shielded applicators, hooded sprayers, wiper applicators or sponge bars after dilution and thorough mixing with water to listed weeds
growing in any non -crop site specified on this label.
In cropping systems, hooded sprayers, shielded sprayers, and wipers may be used in row middles (in between rows of crop plants) where any dripping or leaking will not
contact crop foliage. Such equipment must be capable of preventing all crop contact with herbicide solutions and operated without leakage of spray mists or dripping onto
crop. Wipers over -the -top of crops may be used only when specifically recommended in this product's labeling.
AVOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION.
Contact of the herbicide solution with desirable vegetation may result in damage or destruction. Applicators used above desirable vegetation should be adjusted so that the
lowest spray stream or wiper contact point is at least 2 inches above the desirable vegetation. Droplets, mist, foam or splatter of the herbicide solution settling on desirable
vegetation may result in discoloration, stunting or destruction.
Applications made above the crops should be made when the weeds are a minimum of 6 inches above the desirable vegetation. Better results may be obtained when more
of the weed is exposed to the herbicide solution. Weeds not contacted by the herbicide solution will not be affected. This may occur in dense clumps, severe infestations
or when the height of the weeds varies so that not all weeds are contacted. In these instances, repeat treatment may be necessary.
Shielded and Hooded Applicators
When applied under the conditions described in the following paragraphs for shielded and hooded applications, this product at recommended rates will control those weeds
listed in the "ANNUAL WEEDS RATE TABLE" and "PERENNIAL WEEDS RATE TABLE" sections of this label. A hooded sprayer is a type of shielded applicator where the spray
pattern is fully enclosed including top, sides, front and back, thereby shielding the crop from the spray solution. Keep shields on these sprayers adjusted to protect desir-
able vegetation. When applying to crops grown on raised beds, ensure that the hood is designed to completely enclose the spray solution, If necessary, extend the front
and rear flaps of the hoods to reach the ground in deep furrows. EXTREME CARE MUST BE EXERCISED TO AVOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION.
This equipment must be set up and operated in a manner that avoids bouncing or raising the hoods off the ground in anyway. If the goods are raised, spray particles
may escape and come into contact with the crop, causing damage or destruction of the crop. Avoid operation on rough or sloping ground where the spray hoods might
be raised off the ground.
Use hoods designed to minimize excessive dripping or runoff down the insides of the hoods. A single, low pressure/low drift flat -fan nozzle with an 80 to 95 degree spray
angle positioned at the top center of the hood is recommended. Spray volume should be 20 to 30 gallons per acre.
These procedures will reduce the potential for crop injury:
• The spray hoods must be operated on the ground of skimmed across the ground.
• Leave at least an 8 inch untreated strip over the drill row. For example, if the crop row width is 38 inches, the maximum width of the spray hood should be 30 inches.
• Maximum tractor speed: 5 miles per hour to avoid bouncing of the spray hoods.
• Maximum wind speed: 10 miles per hour.
• Use low -drift nozzles that provide uniform coverage within the treated area.
Crop injury may occur when the foliage of treated weeds comes into direct contact with leaves of the crop. Do not apply this product when the leaves of the crop are growing
in direct contact with weeds to be treated. Droplets, mist, foam or splatter of the herbicide solution may contact the crop and cause discoloration, stunting or destruction.
EXTREME CARE MUST BE EXERCISED TO AVOID CONTACT OF HERBICIDE WITH DESIRABLE VEGETATION.
WIPER APPLICATORS
When applied under the conditions described in the following paragraphs, this product CONTROLS many weeds, including volunteer corn, Texas panicum, common rye,
shattercane, sicklepod, Spanish needles and bristly starbur: and SUPPRESSES many weeds including Florida beggarweed, Bermuda grass, hemp dogbane, dogfen-
nel, guineagrass, johnsongrass, milkweed, silverleaf nightshade, redroot pigweed, giant ragweed, smutgrass, sunflower, Canada thistle, musk thistle, vaseygrass and
velvetleaf.
Wiper applicators are devices that physically wipe appropriate amounts of this product directly onto the weed.
Equipment must be designed, maintained and operated to prevent the herbicide solution from contacting desirable vegetation. Operate this equipment at ground speeds
no greater than 5 mph. Performance may be improved by reducing speed in areas of heavy weed infestations to ensure adequate wiper saturation. Better results may be
obtained if 2 applications are made in opposite directions.
Avoid leakage or dripping onto desirable vegetation. Adjust height of applicator to ensure adequate contact with weeds. Keep wiping surfaces clean. Be aware that, on
sloping ground, the herbicide solution may migrate, causing dripping on the lower end and drying of the wicks on the upper end of a wiper applicator.
Do not use wiper equipment when weeds are wet.
Mix only the amount of solution to be used during a 1-day period, as reduced activity may result from use of leftover solutions. Clean wiper parts immediately after using
this product by thoroughly flushing with water.
Do not add surfactant to the herbicide solution.
For Rope or Sponge Wick Applicators — Mix 1 gallon of this product in 2 gallons of water to prepare a 33 percent solution. Apply this solution to weeds listed above in
this section.
For Panel Applicators — Solutions ranging from 33 to 100 percent of this product in water may be used in panel wiper applicators.
10
8.5 - INJECTION SYSTEMS
This product may be used in aerial or ground injection spray systems. It may be used as a liquid concentrate or diluted prior to injecting into the spray stream. Do not mix
this product with the concentrate of other products when using injection systems.
8.6 - CONTROLLED DROPLET APPLICATION (CDA) EQUIPMENT
The rate of this product applied per acre by vehicle -mounted CDA equipment must not be less than the amount recommended in this label when applied by conventional
broadcast equipment. For vehicle -mounted CDA equipment, apply 3 to 20 gallons of water per acre.
For the control of annual weeds with hand-held CDA units, apply a 20 percent solution of this product at a flow rate of 2 fluid ounces per minute and a walking speed of
1.5 mph (1 quart per acre). For the control of perennial weeds, apply a 20 to 40 percent solution of this product at a flow rate of 2 fluid ounces per minute and a walking
speed of 0.75 mph (2 to 4 quarts per acre).
Controlled droplet application equipment produces a spray pattern which is not easily visible. Extreme care must be exercised to avoid spray or drift contacting the foliage
or any other green tissue of desirable vegetation, as damage or destruction may result.
9.0 - NON -CROP USES AROUND THE FARMSTEAD
9.1 — WEED CONTROL & TRIM -AND -EDGE
LABELED SITES: Non -crop Areas including building foundations, along and in fences, in dry ditches and canals, along ditchbanks, farm roads, shelterbelts, prior to
landscape plantings and equipment
storage areas.
TYPES OF APPLICATIONS
USE DIRECTIONS
PRECAUTIONS, RESTRICTIONS
Any suitable application equip-
This product may be used to control annual weeds, perennials weeds and woody brush which
This product plus dicamba tank
ment described in Section 8.0
are found in any part of the farmstead.
mixtures may not be applied by
of this label
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
air in California
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
TANK MIXTURES: This product may be tank mixed with the following products (or generic
equivalents). Refer to these product labels for approved farmstead sites and application rates.
For annual weeds, use 1 quart per acre of this product when weeds are less than 6 inches tall
and 1.5 quarts per acre when weeds are greater than 6 inches tall. For perennial weeds, apply
2 to 5 quarts per acre in these tank mixes.
For tank mixtures with these products through backpack sprayers, handguns or other high -
volume spray -to -wet applications, see the "HAND-HELD AND HIGH VOLUME EQUIPMENT'
section of this label for recommended rates.
Arsenal Oust Sahara
Barricade 65WG Pendulum 3.3 EC Simazine
Diuron Pendulum WDG Surflan
Endurance Plateau Elar
Escort Princep OF Vanquish
Karmex OF Princep Liquid 2,4-D
Krovar OF Ronstar 50 WP
For control or partial control of the following perennial weeds, apply 1 to 2 quarts of this product
plus 2 to 4 ounces of Oust® per acre.
Bahiagrass Fescue, tall
Bermudagrass Johnsongrass
Broomsedge Poorjoe
Dallisgrass Quackgrass
Dock, curly Vaseygrass
Dogfennel Vervain, blue
9.2 — GREENHOUSE/SHAOEHOUSE
LABELLED USES:
TYPES OF APPLICATIONS USE DIRECTIONS PRECAUTIONS, RESTRICTIONS
Spot Spray, Directed Spray This product may be used to control weeds in and around greenhouses and shadehouses. Air circulation fans must be
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", PERENNIAL turned off during application.
WEEDS", AND WOODY BRUSH & TREES RATE TABLES" IN THIS LABEL. Desirable vegetation should not
be present during application.
W
9.3 — CHEMICAL MOWING
LABELLED USES: Farm Ditches and Other Parts of Farmsteads
TYPES OF APPLICATIONS
USE DIRECTIONS
PRECAUTIONS, RESTRICTIONS
Any suitable application equip-
This product will suppress perennial grasses listed in this section to serve as a substitute for
Use only in areas where some
ment described in Section 8.0
mowing. Use 8 fluid ounces of this product per acre when treating tall fescue, fine fescue,
temporary injury or discoloration
of this label
orchardgrass or quackgrass covers. Use 6 fluid ounces of this product per acre when treating
of perennial grasses can be
Kentucky bluegrass. Use 16 fluid ounces of this product when treating bermudagrass. Use 64
tolerated.
fluid ounces of this product when treating torpedograss or paragrass. Apply treatments in 10 to
20 gallons of spray solution per acre.
9.4 — CUT STUMPS
LABELLED USES: Cut Stumps (on
any non -crop site listed on this label)
TYPES OF APPLICATIONS
USE DIRECTIONS
PRECAUTIONS,
RESTRICTIONS
Suitable Hand -Held Equipment
This product will control regrowth of cut stumps and resprouts of many types of woody brush
Some sprouts, stems, or trees
and tree species, some of which are listed below. Apply this product using suitable equipment
may share the same root system.
to ensure coverage of the entire cambium. Cut trees or resprouts close to the soil surface.
Adjacent trees having a similar
Apply a 50 to 100 percent solution of this product to the freshly -cut surface immediately after
age, height and spacing may signal
cutting. Delays in application may result in reduced performance. For best results, applications
shared roots. Whether grafted or
should be made during periods of active growth and full leaf expansion.
shared, injury is likely to occur to
non -treated stems/trees when one
Alder
Pepper, brazilian
Sweetgum
Eucalyptus
Pine, Austrian
Tan oak
or more trees sharing common
Madrone
Reed, giant
Willow
roots are treated.
Oak
Salt cedar
9.5 — HABITAT MANAGEMENT
LABELLED USES: Habitat Restoration
& Maintenance, Wildlife Food Plots
TYPES OF APPLICATIONS
USE DIRECTIONS
PRECAUTIONS, RESTRICTIONS
Any suitable application equip-
This product may be used to control exotic and other undesirable vegetation in habitat man-
If tillage is needed to prepare a
ment described in Section 8.0
agement and natural areas including rangeland and wildlife refuges. Applications can be made
seedbed, wait 7 days after applica-
of this label
to allow recovery of native plant species, prior to planting desirable native species, and for
tion before tillage to allow translo-
similar broad-spectrum vegetation control requirements in habitat management areas.
cation into underground plant parts.
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
Spot treatments can be made to selectively remove unwanted plants for habitat maintenance
and enhancement.
This product may be used as a site preparation treatment to control annual and perennial
weeds prior to planting wildlife food plots. Any wildlife food species may be planted after
applying this product, or native species may be allowed to repopulate the area.
12
10.0 — FORESTRY, INDUSTRIAL, TURF & ORNAMENTAL
10.1 — FORESTRY SITE PREPARATION
TYPES OF
USE DIRECTIONS
APPLICATIONS
Boom Sprayers, Shielded
This product is recommended for the control or partial control of woody brush, trees and herbaceous
Boom Sprayers, High -Volume
weeds in forestry. This product is also recommended for use in preparing or establishing wildlife
Off -Center Nozzles, Hand-
openings with these sites and maintaining logging roads.
Held Equipment, And Similar
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
Equipment.
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
This product is recommended for use in site preparation prior to planting any tree species, including
Christmas trees, eucalyptus, hybrid tree cultivars and silvicultural nursery sites.
Use higher rates of this product within the recommended range for control or partial control of woody
brush, trees and hard -to -control perennial herbaceous weeds. For best results, apply to actively grow-
ing woody brush and trees after full leaf expansion and before fall color and leaf drop. Increase rates
within the recommended range for control of perennial herbaceous weeds any time after emergence
and before seedheads, flowers or berries appear.
Use the lower rates of this product within the recommended range for control of annual herbaceous
weeds and actively growing perennial herbaceous weeds after seedheads, flowers or berries appear.
Apply to the foliage of actively growing annual herbaceous weeds any time after emergence.
TANK MIXTURES: Tank mixtures of this product may be used to increase the spectrum of vegetation
controlled. When tank mixing, read and carefully observe the label claims, cautionary statements
and all information on the labels of all products used. Use according to the restrictive precautionary
statements for each product in the mixture.
NOTE: For forestry site preparation, make sure the tank -mix product is approved for use prior to
planting the desired species. Observe planting interval restrictions.
Any recommended rate of this product may be used in a tank mix with the following products (or
generic equivalents) for forestry site preparation.
Arsenal Applicators Concentrate Garlon 4A
Chopper Landmark XP
Escort or Escort XP Oust or Oust XP
Garlon 3A Westar
For control of herbaceous weeds, use the lower recommended tank mixture rates. For control of
dense stands or tough -to -control woody brush and trees, use the higher recommended rates.
13
PRECAUTIONS,
RESTRICTIONS
Do not apply this product as an
over -the -top broadcast spray
for forestry conifer or hardwood
release unless otherwise
specified on this label, or in
separate supplemental labeling
published by Albaugh, Inc. for
this product.
10.2 — NONCROP AREAS & INDUSTRIAL SITES
LABELLED USES: Non -crop areas including airports, apartment complexes, Christmas tree farms, commercial sites, Conservation Reserve Program (CRP) areas, ditch
banks, dry ditches, dry canals, fencerows, gold courses, greenhouses, industrial sites, landscape areas, lumber yards, manufacturing sites, municipal sites, natural
areas, office complexes, ornamentals, parks, parking areas, pastures, petroleum tank farms and pumping installations, plant nurseries, public areas, railroads, range-
land, recreational areas, residential areas, rights -of -way, roadsides, schools, sod or turf seed farms, sports complexes, storage areas, substations, turfgrass areas,
utility sites, warehouse areas, and wildlife management areas.
TYPES OF USE DIRECTIONS PRECAUTIONS,
APPLICATIONS RESTRICTIONS
This product may This product may be used to trim -and -edge around objects in non -crop sites, for spot treatment of unwanted veg- *This product plus
be applied with any etation and to eliminate unwanted weeds growing in established shrub beds or ornamental plantings. This product dicamba tank mixtures
suitable application may be used prior to planting an areas to ornamentals, flowers, turgrass (sod or seed), or prior to laying asphalt or may not be applied by
equipment described beginning construction projects. air in California.
in Section 8.0 of this MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL WEEDS", AND
label. "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
Repeated applications of this product may be used, as weeds emerge, to maintain bare ground.
TANK MIXTURES: This product may be tank mixed with the following products (or generic equivalents) provided
that the specific product is registered for use on the target site. Refer to these product labels for approved sites
and application rates. Read and carefully observe the cautionary statements and all other information appear-
ing on the labels of all herbicides used. Use according to the most restrictive precautionary statements for each
product in the mixture.
Use is responsible for ensuring that the mixture product's label allows the specific applications.
ArsenalTM
Outrider
atrazine
pendimethalin
BarricadeTM 65WG
PlateauTM
Certainty
Crossbow L
dicamba*
Landmark II MP
diuron
Landmark II
EnduranceTM
RonstarTM 50 WP
EscortTM
Escort XP
simazine
Gallery 75DF
SurflanTM AS
GarlonTM 3A
Surflan WDG
Garlon 4
TelarTM OF
Goal 2XL
Transline
Velpar OF
KrovarTM I OF
Velpar L
Oust
2,4-D
Oust XP
Poast
When applied as a tank mixture for bare ground, this product provides control of the emerged annual weeds and
control of partial control of emerged perennial weeds, woody brush and trees.
For control or partial control of the following perennial weeds, apply 1 to 2 quarts of this product plus 2 to 4
ounces of Oust or Oust XP per acre.
Bahiagrass
Dock, curly
Poorjoe
Bermudagrass
Dogfennel
Quackgrass
Broomsedge
Fescue, tall
Vaseygrass
Dallisgrass
Johnsongrass
Vervain, blue
14
10.3 — INJECTION & FRILL (Woody Brush & Trees)
LABELED SITES: Woody brush
& Trees in non -crop areas
TYPES OF
USE DIRECTIONS
PRECAUTIONS,
APPLICATIONS
RESTRICTIONS
Injection or Frill
Apply this product using suitable equipment which must penetrate into the living tissue. Apply the equiva-
Avoid application techniques
Applications
lent of 1 mL of this product per each 2 to 3 inches of trunk diameter at breast height (DBH). This is best
that allow runoff to occur
achieved by applying a 50 to 100 percent concentration of this product either to a continuous frill around
from frilled or cut areas in
the tree or as cuts evenly spaced around the tree below all branches. As tree diameter increases in size,
species that exude sap freely.
better results are achieved by applying diluted material to a continuous frill or more closely spaced cuttings.
In species such as this, make
For best results, application should be made during periods of active growth and after full leaf expansion.
the frill or cuts at an oblique
This product will control many species, some of which are listed below:
angle to produce a cupping
effect and use a 100 percent
Contr„ol Parti...Cq,.....
concentration of this product.
Oak Black gum
Poplar Dogwood
Sweetgum Hickory
Sycamore Maple, red
10.4 — HOLLOW STEM INJECTION
LABELLED SITES: Hollow -stem plants growing in any non -crop site specified on this label.
TYPES OF USE DIRECTIONS PRECAUTIONS,
APPLICATIONS RESTRICTIONS
Hand -Held Injection
For control of the following hollow -stem plants, use the application rates below:
The combined total for all
Devices That Deliver
Japanese Knotweed, Polygonum cusuiciatum
treatments must not exceed
Recommended Amounts
Inject 5mL per stem of this product between second and third internode.
7 quarts of this product per
Of This Product
acre. At 5 mL per stem, 7
Bohemian Knotweed, Polygonum bohemicum
quarts should treat approxi-
Inject 5mL per stem of this product between the second and third internode.
mately 1300 stems per acre,
Giant Hogweed, Hercleum mantegazxianum
Inject one leaf cane per plant 12 inches above the root brown with 5 mL of a 5% v/v solution of this product.
Poison Hemlock, Conium maculatum
Inject one leaf cane per plant 10 to 12 inches above the root crown with 5 mL of a 5% v/v solution of this
product.
Field horsetail, Equisetum arvense
Inject one segment above the root crown with 0.5 mL per stem of this product. Use a small syringe that
calibrates to this rate.
Canada Thistle, Cirsium arvense
Cut 8 to 9 of the tallest plants at bud stage in a clump with clippers. Use a cavity needle that is pushed into
the stem center and then slowed removed as 0.5 mL per stem of this product is injected into the stem.
15
10.5 — ORNAMENTALS, PLANT NURSERIES & CHRISTMAS TREES
LABELED SITES: Plant Nurseries, Christmas Tree farms & other non-food tree production sites
TYPES OF APPLICATIONS USE DIRECTIONS PRECAUTIONS, RESTRICTIONS
Post -Directed, Trim -and -Edge
This product may be used as a post -directed spray around established woody ornamental species
UNLESS OTHERWISE DIRECTED,
(including arborvitae, azalea, boxwood, crabapple, eucalyptus, euonymus, fir, Douglas fir, jojoba,
THIS PRODUCT IS NOT RECOM-
hollies, lilac, magnolia, maple, oak, poplar, privet, pine, spruce and yew, growing in plant nurser-
MENDED FOR USE AS AN OVER-
ies, on Christmas tree farms, or on other non-food tree production sites), or to trim and edge
THE -TOP BROADCAST SPRAY IN
around trees, buildings, sidewalks, roads, potted plants and other objects in a production setting.
ORNAMENTALS AND CHRISTMAS
Apply at a concentration recommended by Section 15.0 or Section 16.0 or Section 16.1 or Section
TREES.
17.0 appropriate to the species of weed to be controlled.
Care must be taken to avoid con -
Desirable plants may be protected from the spray solution by using shields or coverings made of
tact of spray, drift of mist with
cardboard or other impermeable material.
foliage or green bark of desirable
ornamental species.
Site Preparation
This product may be used prior to planting any tree, shrub or vine, including Christmas tree spe
cies, in a nursery or production setting.
Wiper Application
This product may be used through wick or other suitable wiper applicators to control or partially
control undesirable vegetation around established trees, shrubs or vines. See the "SELECTIVE
EQUIPMENT' section of this label for further information about the proper use of wiper applicators.
10.6 — PARKS, RECREATIONAL & RESIDENTIAL AREAS
LABELLED SITES: Around Trees, Fences, Paths, Driveways, Around Buildings, Patios, Sidewalks, Flower Beds, Around Shrubs and other Ornamental Plants
TYPES OF APPLICATIONS
USE DIRECTIONS
Trim -and -Edge,
This product may be used to eliminate unwanted weeds growing in areas listed above.
Spot Treatment
Use suitable hand held equipment for directed
spraying according to instructions in Section 7.3 "MIXING FOR HAND-HELD SPRAYERS".
If necessary, use cardboard or plastic to shield desirable plants.
Do not use for spot weed control in lawns since desirable lawn grass will also be killed.
Site Preparation,
This product may be used prior to planting an area to ornamentals, flowers, turfgrass (sod or
Lawn Renovation
seed), lawn renovation or prior to laying asphalt or beginning construction projects.
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
Apply using suitable broadcast or directed spray equipment.
For lawn renovation, thorough coverage is necessary to kill all weeds and old lawn.
For best results, apply when daytime temperatures are at least 60°F. Do not mow for 7 days
before or after treatment.
7 days after application, soil may be tilled, fertilized and seeded.
16
PRECAUTIONS, RESTRICTIONS
Spray only when air is calm.
Care must be taken to avoid con-
tact of spray, drift of mist with
foliage or green bark of desirable
ornamental species.
10.7 — RAILROADS
LABELLED SITES: Railroad Rights -of -Way, Railroad Ballast areas
TYPES OF APPLICATIONS
USE DIRECTIONS
PRECAUTIONS, RESTRICTIONS
Boom Sprayers, Shielded
All of the instructions in the "NONCROP AREAS AND INDUSTRIAL SITES" section apply to railroads.
Observe application precautions in
Boom Sprayers, High-
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
Section 8.0.
Volume Off -Center Nozzles,
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
Avoid application to non -target
Hand -Held Equipment
This product may be used to maintain bare ground on railroad ballast and shoulders. Repeat
plants due to drift, overspray or
applications of this product may be used, as weeds emerge, to maintain bare ground. This prod-
runoff.
uct may be used to control tall -growing weeds to improve line -of -sight at railroad crossings and
reduce the need for mowing along rights -of -way. For crossing applications, up to 80 gallons of
spray solution per acre may be used.
TANK MIXTURES: This product may be tank mixed with the following products (or generic equiva-
lent) for ballast, shoulder, spot, bare ground and crossing treatments provided that the specific
product is registered for use on such sites. Refer to these product labels for approved non -crop
sites and application rates. Read and carefully observe the cautionary statements and all other
information appearing on the labels of all herbicides used. Use according to the most restrictive
precautionary statements for each product in the mixture.
ARSENAL® KROVAR®IDF
Dicamba OUST'
DIURON SAHARA@
ESCORT® SPIKE®
GARLON® 3A TELAR®
GARLON® 4 VELPAR®
HYVAR® X 2,4-D
Brush control
This product may be used to control woody brush and trees on railroad rights -of -way. Apply 4 to
10 quarts of this product per acre as a broadcast spray, using boom -type or boomless nozzles.
Up to 80 gallons of spray solution per acre may be used. Apply a 3/4 to 2 percent solution of this
product when using high -volume spray -to -wet applications. Apply a 5 to 10 percent solution of this
product when using low volume directed sprays for spot treatment. This product may be mixed
with the following products (or generic equivalent) for enhanced control of woody brush and trees:
ARSENAL° TELARK OF
ESCORT® TORDON® K
GARLON® 3A TORDON 22K
GARLON 4 TRANSLINE
KERNITE VANQUISH
VELPAR
17
10.8 — ROADSIDES
LABELLED SITES: Roadside Rights of Way areas (including Shoulders, Guardrails and Signposts)
TYPES OF APPLICATIONS USE DIRECTIONS PRECAUTIONS, RESTRICTIONS
Boom Sprayers, Shielded
All the instructions in the "NONCROP AREAS AND INDUSTRIAL SITES" section apply to roadsides.
Observe application precautions in
Boom Sprayers, High -Volume
MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
Section 8.0.
Off -Center Nozzles, Hand-
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
Avoid application to non -target
Held Equipment, And Similar
Equipment.
This product may be used on road shoulders, under guardrails and around signposts and other
plants due to drift, overspray or
objects along roadsides that may be obstacles to mowing.
runoff.
TANK MIXTURES: This product may be tank -mixed with the following products (or generic
equivalent) for shoulder, guardrail, spot and bare ground treatments:
BANVEL® PRINCEP® LIQUID
DIURON RONSTAR® 50 WP
ENDURANCE® SAHARA®
ESCORT® SIMAZINE
KROVAR®IOF SURFLAN®
OUST® TELAR®
PENDULUM® 3.3 EC VANQUISH®
PENDULUM® WDG 2,4-D
PRINCEP® OF
See the "GENERAL NONCROP AREAS AND INDUSTRIAL SITES" section of this label for general
instructions for tank mixing.
Spot treatment
This product may be used as a spot treatment to control unwanted vegetation growing along
roadsides.
18
10.9 — UTILITY SITES
LABELLED SITES: Electrical Power, Pipeline And Telephone Rights -Of -Way, And In Other Sites Associated With These Rights -Of -Way, Including Substations, Road-
sides, Railroads Or Similar Rights -Of -Way That Run In Conjunction With Utilities.
TYPES OF APPLICATIONS USE DIRECTIONS
Boom Sprayers, Shielded This product may be used in utility sites and substations to control unwanted vegetation and
Boom Sprayers, High -Volume to eliminate unwanted weeds growing in established shrub beds or ornamental plantings. This
Off -Center Nozzles, Hand- product may be used prior to planting a utility site to ornamentals, flowers, turfgrass (sod or
Held Equipment, And Similar seed), or beginning construction projects.
Equipment. MAKE APPLICATIONS ACCORDING TO THE RATES LISTED IN "ANNUAL WEEDS", "PERENNIAL
WEEDS", AND "WOODY BRUSH & TREES" RATE TABLES IN THIS LABEL.
Repeated applications of this product may be used, as weeds emerge, to maintain bare ground.
This product can also be used when preparing or establishing wildlife openings within these
sites, maintaining access roads and for side trimming along utility rights -of -way.
For control of herbaceous weeds, use the lower recommended tank mixture rates. For control of
dense stands of tough -to -control woody brush and trees, use the higher recommended rates.
TANK MIXTURES: Tank mixtures of this product may be used to increase the spectrum of control
for herbaceous weeds, woody brush and trees. This product may be tank mixed with the fol-
lowing products or generic equivalent). Refer to these products' labels for approved non -crop
sites and application rates. Read and carefully observe the cautionary statements an all other
information appearing on the labels of all herbicides used. Use according to the most restrictive
precautionary statements for each product in the mixture.
User is responsible for ensuring that the mixture product's label allows the specific application
when tank mixing with a single generic active ingredient listed below.
Arsenal
Krenite
simazine'
atrazine'
Krovar 1 OF
Surflan AS
Barricade 65WG
Oust
Surflan WDG
dicamba'
Oust XP
Telar OF
diuron'
Outrider
Transline
Endurance
pendimethalin'
Vanquish
Escort
Plateau
Velpar DF
Escort XP
Princep
Velpar L
Garlon 3A2
Ronstar 50WP
2,4-D2
Garlon 43
Sahara
' Tank mixtures with product containing this generic active ingredient may be made
provided the specific product is registered for the use.
2 Ensure that Garlon 3A is thoroughly mixed with water according to label directions before add-
ing this product. Have spray mixture agitating at the time this product is added to avoid spray
incompatibility problems.
3 For side trimming treatments, it is recommended that this product be used alone or in a tank
mixture with Garlon 4.
19
PRECAUTIONS, RESTRICTIONS
Observe application precautions in
Section 8.0.
Avoid application to non -target
plants due to drift, overspray or
runoff.
11.0 - ANNUAL WEEDS RATE TABLES ALPHABETICALLY BY SPECIES
WATER CARRIER VOLUMES OF 3 T010 GALLONS PER ACRE FOR GROUND APPLICATIONS AND 3 TO 5 GALLONS PER ACRE FOR AERIAL APPLICATIONS ARE RECOMMENDED.
• Apply to actively growing annual weeds. Annual weeds are generally easiest to control when they are small.
• Older, mature (hardened) annual weed species may require higher rates even if they meet the size requirements.
• Do not tank mix with soil residual herbicides when using these rates unless otherwise specified.
• For weeds that have been mowed, grazed or cut, allow regrowth to occur prior to treatment.
• This product may be used up to 48 fluid ounces per acre where heavy weed densities exist.
ANNUAL WEEDS RATE TABLE
APPLICATION
RATE (fluid ounces/acre)
WEED SPECIES
16 24
32
40
48
Maximum
heighUlength (in inches)
Ammannia, purple
3" 6"
12"
18"
Annoda, spurred
-- 2"
3"
5`"
84
Barley
18" 1811+
_
-
Barnyardgrass
-
3"
6"°
7"
9`°
Bassia, fivehook
-
6"
-
Beggarweed, Florida
51"
8"
-
Bittercress
12"
20"
-
Bluegrass, annual
10"
-
Bluegrass, bulbous
6"
-
-
Brome, downy','
6"
1211
Brome, Japanese
6111211
24"
Browntop panicum
6"
8"'
12"
24'p
Buckwheat, wild3
1""
24"
-
Burcucumber
6"
12"
18"
Buttercup
12"
20"
Carolina geranium
-
-
4"
9""
Carpetweed
6°"
12"
Cheatz
6"°
20„
Chervil
20"
TT
Chickweed
_
12"
18"
_
-
Cocklebur
12"
18"
24"
36"
Copperleaf, hophornbeam
2"
4"
6"
Copperleaf, Virginia
2"
44"
6"
Coreopsis, plains
-
6"
12"
18"
Corn, Volunteer
6"
12"
20"
µ
Corn speedwell
12"
-
-
Crabgrass
3"
6"'
12"
Crowfootgrass
-
-
6"
12"
Cutleaf evening primrose
3'
6"
Devilsclaw (unicorn plant)
-
3""
6"
Dwarfdandelion
12"
-
-
Eastern mannagrass
81'
12"
-
-
Eclipta
-
4"
W,
12"
Fall panicum
4"'
6"
-
12"
Falsedandelion
-
20"
-
-
Falseflax, smallseed
12"
-
-
20 (continued)
ANNUAL WEEDS RATE TABLE (continued)
APPLICATION
RATE (fluid ounces/acre)
16
24
1 32 1
40
48
WEED SPECIES
Maximum
height/length (in inches)
Fiddleneck
6"
12"
-
Field pennycress
6"'
12"
-
-
Filaree
-
6'
12"
Fleabane, annual
V
20"
-
Fleabane, hairy (Conyza bonariensis)
-
6"
10"
Fleabane, rough
3`"
6""
12"
Florida pusley
-
4"
6"
Foxtail, giant, bristly, yellow
6"
12"
20"
Foxtail, Carolina
10"
-
-
-
Foxtain, green
12"
-
-
-
-
Goatgrass, jointed
6"
12"
-
Goosegrass
-
3"
6"
-
12"
Grain sorghum (milo)
6"
12"
20"
-
Groundcherry
-
3"
6"
91H
Groundsel, common
6°"
10"
Hemp sesbania
2"
4'"
6"
8"
Henbit
6."
_
1211
Horseweed/Marestail
-
6
12"
18"
(Conyza canadensis)
Itchgrass
6"
8`"
12"
18"
Jimsonweed
-
12"
18"
Johnsongrass, seedling
6"
12"
18"
-
241"
Junglerice
-
3"
6"
7"
91"
Knotweed
-
6°"
-
12"
Kochia4
3" to 6"
12"
Lambsquarters
-
6"
12 .
20"
Little barley
6"'
12"-
-
-
London rocket
6,
T
24"
Mayweed
2"
6"
12"
181'
Morningglory (1pomoea spp.)
3"
-
6"
Mustard, blue
6"
12"
18"
-
Mustard, tansy
6"
12"
18"
Mustard, tumble
6"
12"
18"
-
Mustard, wild
6"
12"
18"
Nightshade, black
-
4°"
6""
12"
Nightshade, hairy
4"°
6"°
12"
Oats
3'
6'"
181,
Pigweed
-
12"
181'
24"
Prickly lettuce
6"°
12"
-
-
Purslane
-
3"
6"
Ragweed, common
6"
12"
18"
Ragweed, giant
6°"
12"
18"
(continued)
ANNUAL WEEDS RATE TABLE (continued)
APPLICATION
RATE (fluid ounces/acre)
WEED SPECIES
16
24
1, 32
40
48
Maximum
height/length (in inches)
Red rice
4"
_
w
Rye, volunteer/cereal'
6"
18"
18"+
Ryegrass
-
6""
12"
Sandbur, field
6"
12"
-
Sandbur, longspine
6'
12"
-
Shattercane
6"'
12"
20"
-
Shepherdspurse
61"
12"
-
Sicklepod
-
2"
4"
8""
Signalgrass, broadleaf
300
61"
7"
9"
Smartweed, ladysthumb
-
6"0
9'"'
Smartweed, Pennsylvania
-
6'
91'
Sowthistle, annual
6'
12"
Spanishneedles
6""
-
12"
Speedwell, purslane
12"
-
Sprangletop
6"
12"
20"
-
Spurge, prostrate
641
12"
Spurge, spotted
_
61"
12"
-
Spurry, umbrella
6"
-
Stinkgrass
12
Sunflower
12"
18"
-
Swinecress
5"'
12"
Teaweed/Prickly sida
2"
4"
6"
Texas panicum
6"
8"
12"
24"
Thistle, Russians
6"
12"
-
-
Velvetleaf
-
6"
12"
Virginia pepperweed
18"
-
-
-
Waterhemp
-
-
6"
12"
Wheat'
6"
12'
1$1.
Wheat (overwintered)
-
6""
12"
18"
Wild oats 3" 6" 18"
Wild proso millet 6" 12" 18"
Witchgrass - 12" -
Woolly cupgrass 6"" 12"
Yellow rocket - 12' 20" -
For control of downy brome in no -till systems, use 24 fluid ounces per acre.
' Performance is better if application is made before this weed reaches the boot stage of growth.
3 Use 24 fluid ounces per acre of this product to control wild buckwheat in the cotyledon to 2-leaf stage.
Use 32 fluid ounces per acre to control 2- to 4-leaf wild buckwheat. For improved control of wild buckwheat over 2 inches in size, use sequential treatments of 32 fluid
ounces followed by 32 fluid ounces of this product per acre.
' Do not treat kochia in the button stage.
5 Control of Russian thistle may vary based on environmental conditions and spray coverage.
Whenever possible, a tank mixture with 2,4-1) as described below may improve control.
22
11.1 — ANNUAL WEEDS — Water Carrier Volumes of 10 to 40 Gallons per Acre
Apply 1 to 2 quarts of this product per acre. Use 1 quart per acre if weeds are less than 6 inches tall and 1.5 quarts per acre if weeds are 6 to 12 inches tall and 2 quarts
per acre if weeds are greater than 12 inches tall.
These rates will provide control of weeds listed in the annual weed control tables when water carrier volumes are 10 to 40 gallons per acre for ground applications. Older,
mature (hardened) annual weed species may require higher rates even of they meet the size requirements.
11.2 — ANNUAL WEEDS — Hand -Held or High -Volume Equipment
For control of weeds listed in the "ANNUAL WEEDS RATE TABLE", apply a 0.5 percent solution of this product to weeds less than 6 inches in height or runner length. Apply
prior to seedhead formation in grass or bud formation in broadleaf weeds. For annual weeds over 6 inches tall, or unless otherwise specified, use a 1 percent solution.
For best results, use a 2 percent solution on harder -to -control perennials, such as bermudagrass, dock, field bindweed, hemp dogbane, milkweed and Canada thistle.
When using application methods that result in less than complete coverage, use a 5 percent solution for annual and perennial weeds and a 5 to 10 percent solution for
woody brush and trees.
12.0 — PERENNIAL WEEDS RATE TABLE (ALPHABETICALLY BY SPECIES)
Apply to actively growing perennial weeds.
NOTE: If weeds have been mowed or tilled, do not treat until plants have resumed active growth and have reached the recommended stages.
Repeat treatments may be necessary to control weeds regenerating from underground parts or seed. Repeat treatments must be made prior to crop emergence.
Unless otherwise stated, allow 7 or more days after application before tillage.
Do not treat when weeds are under drought stress as good soil moisture is necessary for active growth.
For hand-held sprayers, prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table:
Spray Solution
Desired Amount of GlyStar® Pro
Volume 1/2% 1% 1-1/2% 2% 5%
10%
1 Gal 2/3 oz 1-1/3 oz 2 oz 2-2/3 oz 6-1/2 oz
13 oz
25 Gal 1 pt 1 qt 1-1/2 qt 2 qt 5 qt
10 qt
100 Gal 2 qt 1 gal 1-1/2 gal 2 gal 5 gal
10 gal
2 tablespoons =1 fluid ounce
WEED SPECIES
Alfalfa
Alligatorweed
RATE
(QT/A)
1-2
4
WATER
VOL. (GPA)
3-10
3-20
HAND-HELD
% SOLUTION
2%
1.5%
COMMENTS
Make applications after the last hay cutting in the fall. Allow alfalfa to regrow to a height
of 6 to 8 inches or more prior to treatment. Applications should be followed with deep
tillage at least 7 days after treatment, but before soil freeze-up.
Partial control. Apply when most of the plants are in bloom. Repeat applications will be
required to maintain control.
Anise (fennel)
r
1-2%
Apply as a spray -to -wet treatment. Optimum results are obtained when plants are treated
at the bud to full -bloom stage of growth.
Bahiagrass
3-5
3-20
2%
Apply when most plants have reached the early head stage.
Bentgrass
1.5
10-20
2%
For suppression in grass seed production areas. For ground applications only. Ensure
entire crown area has resumed growth prior to a fall application. Bentgrass should have at
least 3 inches of growth. Tillage prior to treatment should be avoided. Tillage 7 to 10 days
after application is recommended for best results.
Bermudagrass
3-5
3-20
2%
For control, apply 5 quarts of this product per acre. For partial control, apply 3 quarts per
acre. Treat when bermudagrass is actively growing and seedheads are present. Retreat-
ment may be necessary to maintain control.
Bermudagrass,
1-1.5
5-10
2%
Apply 1.5 quarts of this product in 5 to 10 gallons of water per acre. Apply when water
water (knntgrass)
bermudagrass is 12 to 18 inches in length. Allow 7 or more days before tilling, flushing
or flooding the field.
Fall applications only: Apply 1 quart of this product in 5 to 10 gallons of water per acre.
Fallow fields should be tilled prior to application. Apply prior to frost on water bermuda-
grass that is 12 to 18 inches in length.
This product is not registered in California for use on water bermudagrass.
23 (continued)
WEED SPECIES
RATE
WATER
HAND-HELD
COMMENTS
(QT/A)
VOL. (GPA)
% SOLUTION
Bindweed, field
0.5-5
3-20
2%
Do not treat when weeds are under drought stress as good soil moisture is necessary for
active growth.
For control, apply 4 to 5 quarts of this product per acre west of the Mississippi River and
3 to 4 quarts east of the Mississippi River. Apply when the weeds are at or beyond full
bloom. For best results, apply in late summer or fall. Fall treatments must be applied
before a killing frost.
Also for control, apply 2 quarts of this product plus 0.5 pounds a.i. of Banvel® in 10 to 20
gallons of water per acre. Do not apply by air.
For suppression on irrigated agricultural land, apply 1 to 2 quarts of this product plus 1
pound a.i. of 2,4-D in 10 to 20 gallons of water per acre with ground equipment only.
Applications should be made following harvest or in fall fallow ground when the bindweed
is actively growing and the majority of runners are 12 inches or more in length. The use
of at least one irrigation will promote active bindweed growth.
For suppression, apply 16 fluid ounces of this product plus 0.5 pound a.i. 2,4-D in 3 to 10
gallons of water per acre for ground applications and 3 to 5 gallons of water per acre for
aerial applications. Apply by air in fallow and reduced tillage systems only. Applications
should be delayed until maximum emergence has occurred and when vines are between
6 to 18 inches in length.
In California only, apply 1 to 5 quarts of this product per acre. Actual rate needed for
suppression or control will vary within this range depending on local conditions. For sup-
pression on irrigated land where annual tillage is performed, apply 1 quart of this product
in 3 to 10 gallons of water per acre. Apply to bindweed that has reached a length of 12
inches or greater. Allow maximum weed emergence and runner growth. Allow 3 or more
days after application before tillage.
Bluegrass,
1-2
3-40
2%
Apply 2 quarts of this product in 10 to 40 gallons of water per acre when most plants
Kentucky
have reached boot -to -early seedhead stage of development. For partial control in pasture
or hay crop renovation, apply 1 to 1.5 quarts of this product in 3 to 10 gallons of water
per acre. Apply to actively growing plants when most have reached 4 to 12 inches in
height.
Blueweed, Texas
3-5
3-40
2%
Apply 4 to 5 quarts of this product per acre west of the Mississippi River and 3 to 4 quarts
per acre east of the Mississippi River. Apply when plants are at or beyond full bloom. New
leaf development indicates active growth. For best results, apply in late summer or fall.
Fall treatments must be applied before a killing frost.
Brackenfern
3-4
3-40
1-1.5%
Apply to fully expanded fronds which are at least 18 inches long.
Bromegrass,
1-2
3-40
2%
Apply 2 quarts of this product in 10 to 40 gallons of water per acre when most plants have
smooth
reached boot -to -early seedhead stage of development. For partial control in pasture or hay
crop renovation, apply 1 to 1.5 quarts of this product in 3 to 10 gallons of water per acre.
Apply to actively growing plants when most have reached 4 to 12 inches in height.
Bursage,
3-20
2%
For control, apply 2 quarts of this product plus 1 pint of Banvel® per acre. For partial con -
woolly -leaf
trol, apply 1 quart of this product plus 1 pint of Banvel® per acre. Apply when plants are
producing new active growth which has been initiated by moisture for at least 2 weeks
and when plants are at or beyond flowering.
Canarygrass, reed
2-3
3-40
2%
For best results, apply when most plants have reached the boot -to -head stage of growth..
Cattail
3-5
3-40
2%
Apply when most plants have reached the early head stage.
Clover; red, white
3-5
3-20
2%
Apply when most plants have reached the early bud stage.
Also for control, apply 16 to 32 fluid ounces of this product plus 112 to 1 pound of 2,4-D
in 3 to 10 gallons of water per acre.
Cogongrass
3-5
10-40
2%
Apply when cogongrass is at least 18 inches tall in late summer or fall. Due to uneven
stages of growth and the dense nature of vegetation preventing good spray coverage,
repeat treatments may be necessary to maintain control.
Dallisgrass
3-5
3-20
2%
Apply when most plants have reached the early head stage.
(continued)
24
WEED SPECIES
RATE
WATER
HAND-HELD
COMMENTS
(QT/A)
VOL. (GPA)
% SOLUTION
Dandelion
3-5
3-40
2%
Apply when most plants have reached the early bud stage of growth.
Also for control, apply 16 fluid ounces of this product plus 0.5 pound a.i. 2,4-D in 3 to 10
gallons of water per acre.
Dock, curly
3-5
3-40
2%
Apply when most plants have reached the early bud stage of growth.
Also for control, apply 16 fluid ounces of this product plus 0.5 pound a.i. 2,4-D in 3 to 10
gallons of water per acre.
Dogbane, hemp
4
3-40
2%
Apply when most plants have reached the late bud to flower stage of growth. Following
crop harvest or mowing, allow weeds to regrow to a mature stage prior to treatment. For
best results, apply in late summer or fall.
For suppression, apply 16 fluid ounces of this product plus 0.5 pound a.i. of 2,4-D in 3
to 10 gallons of water per acre for ground applications and 3 to 5 gallons of water per
acre for aerial applications. Delay applications until maximum emergence of dogbane has
occurred.
Fescue
3-5
3-20
2%
Apply when most plants have reached the early head stage.
(except tall)
Fescue, tall
1-3
3-40
2%
Apply 3 quarts of this product per acre when most plants have reached boot -to -early
seedhead stage of development.
Fall applications only: Apply 1 quart of this product in 3 to 10 gallons of water per acre.
Apply to fescue in the fall when plants have 6 to 12 inches of new growth. A sequential
application of 1 pint per acre of this product will improve long-term control and control
seedlings germinating after fall treatments or h following r' g g g t the olio spring.
g 9 .
Guineagrass
2-3
3-40
1 %
Apply when most plants have reached at least the 7-leaf stage of growth. Ensure thor-
ough coverage when using hand-held equipment.
Horsenettle
3-5
3-20
2%
Apply when most plants have reached the early bud stage.
Horseradish
4
3-40
2%
Apply when most plants have reached the late bud to flower stage of growth. For best
results, apply in late summer or fall.
Iceplant
-
1.5-2%
Iceplant should be at or beyond the early bud stage of growth. Thorough coverage is
necessary for best control.
Jerusalem
3-5
3-20
2%
Apply when most plants are in the early bud stage.
artichoke
Johnsongrass
0.5-3
3-40
1 %
In annual cropping systems apply 1 to 2 quarts of this product per acre. Apply 1 quart of
this product in 3 to 10 gallons of water per acre. Use 2 quarts of this product when apply-
ing 10 to 40 gallons of water per acre. In noncrop, or areas where annual tillage (no -till) is
not practiced, apply 2 to 3 quarts of this product in 10 to 40 gallons of water per acre.
For best results, apply when most plants have reached the boot -to -head stage of growth
or in the fall prior to frost. Allow 7 or more days after application before tillage. Do not
tank mix with residual herbicides when using the 1 quart per acre rate.
For burndown of Johnsongrass, apply 1 pint of this product in 3 to 10 gallons of water per
acre before the plants reach a height of 12 inches. For this use, allow at least 3 days after
treatment before tillage.
Spot treatment (partial control or suppression) — Apply a 1 percent solution of this prod-
uct when Johnsongrass is 12 to 18 inches in height. Coverage should be uniform and
complete.
Kikuyugrass
2-3
3-40
2%
Spray when most kikuyugrass is at least 8 inches in height (3- or 4-leaf stage of growth).
Allow 3 or more days after application before tillage.
Knapweed
4
3-40
2%
Apply when most plants have reached the late bud to flower stage of growth. For best
results, apply in late summer or fall.
Lantana
1-1.25%
Apply at or beyond the bloom stage of growth. Use the higher application rate for plants
that have reached the woody stage of growth.
Lespedeza
3 5
3-20
2%
Apply when most plants have reached the early bud stage.
(continued)
25
WEED SPECIES
RATE
WATER
HAND-HELD
.........................
COMMENTS
(OT/A)
VOL. (GPA)
% SOLUTION
Milkweed,
3
3-40
2%
Apply when most plants have reached the late bud to flower stage of growth.
common
Muhly, wirestem
1-2
3-40
2%
Use 1 quart of this product in 3 to 10 gallons of water per acre. Use 2 quarts of this prod-
uct when applying 10 to 40 gallons of water per acre or in pasture, sod, or noncrop areas.
Spray when the wirestem muhly is 8 inches or more in height. Do not till between harvest
and fall applications or in the fall or spring prior to spring applications. Allow 3 or more
days after application before tillage.
Mullein, common
3-5
3-20
2%
Apply when most plants are in the early bud stage.
Napiergrass
3-5
3-20
2%
Apply when most plants are in the early head stage.
Nightshade,
2
3-10
2%
Applications should be made when at least 60 percent of the plants have berries. Fall
silverleaf
treatments must be applied before a killing frost.
Nutsedge; purple,
0.5-3
3-40
1-2%
Apply 3 quarts of this product per acre or apply a 1 to 2 percent solution for control of
yellow
nutsedge plants and immature nutlets attached to treated plants. Treat when plants are
in flower or when new nutlets can be found at rhizome tips. Nutlets which have not ger-
minated will not be controlled and may germinate following treatment. Repeat treatments
will be required for long-term control of ungerminated tubers.
Sequential applications: 1 to 2 quarts of this product in 3 to 10 gallons of water per acre
will also provide control. Make applications when a majority of the plants are in the 3- to
5-leaf stage (less than 6 inches tall). Repeat this application, as necessary, when newly
emerging plants reach the 3- to 5-leaf stage. Subsequent applications will be necessary
for long-term control.
For partial control of existing plants, apply 1 pint to 2 quarts of this product in 3 to 40
gallons of water per acre. Treat when plants have 3 to 5 leaves and most are less than 6
inches tall. Repeat treatments will be required to control subsequent emerging plants or
regrowth of existing plants.
Orchardgrass
1-2
3-40
2%
Apply 2 quarts of this product in 10 to 40 gallons of water per acre when most plants
have reached boot -to -early seedhead stage of development. For partial control in pasture
or hay crop renovation, apply 1 to 1.5 quarts of this product in 3 to 10 gallons of water
per acre. Apply to actively growing plants when most have reached 4 to 12 inches in
height.
Orchardgrass sods going to no -till corn: Apply 1 to 1.5 quarts of this product in 3 to 10
gallons of water per acre. Apply to orchardgrass that is a minimum of 12 inches tall for
spring applications and 6 inches tall for fall applications. Allow at least 3 days following
application before planting. A sequential application of atrazine will be necessary for
optimum results.
Pampasgrass
-
-
1.5-2%
Pampasgrass should be at or beyond the boot stage of growth. Thorough coverage is
necessary for best control.
Paragrass
3-5
3-20
2%
Apply when most plants are in the early head stage.
Phragmites
3-5
10-40
1-2%
For partial control. For best results, treat during late summer or fall months or when
plants are actively growing and in full bloom. Treatment before or after this stage may
lead to reduced control. Due to the dense nature of the vegetation, which may prevent
good spray coverage or uneven stages of growth, repeat treatments may be necessary to
maintain control. Visual control symptoms will be slow to develop.
Poison hemlock
-
-
1-2%
Apply as a spray -to -wet treatment. Optimum results are obtained when plants are treated
at the bud to full -bloom stage of growth.
Pokeweed,
1
3-40
2%
Apply to actively growing plants up to 24 inches tall.
common
(continued)
26
WEED SPECIES
RATE
WATER
HAND-HELD
COMMENTS
(QT/A)
VOL. (GPA)
% SOLUTION
Quackgrass
1-3
3-40
2%
In annual cropping systems, or in pastures and sods followed by deep tillage: Apply 1
quart of this product in 3 to 10 gallons of water per acre. For 10 to 40 gallons of water
per acre, apply 2 quarts of this product. Do not tank mix with residual herbicides when
using the 1 quart rate. Spray when quackgrass is 6 to 8 inches in height. Do not till
between harvest and fall applications or in fall or spring prior to spring application. Allow
3 or more days after application before tillage. In pastures or sods, use a moldboard plow
for best results.
In pastures, sods or noncrop areas where deep tillage does not follow application: Apply
2 to 3 quarts of this product in 10 to 40 gallons of water per acre when the quackgrass is
greater than 8 inches tall.
Redvine
0.75-2
5-10
2%
For suppression, apply 24 fluid ounces of this product per acre at each of two applications
7 to 14 days apart or a single application of 2 quarts per acre. Apply recommended rates
in 5 to 10 gallons of water per acre. Apply in late September or early October to plants
which are at least 18 inches tall and have been growing 45 to 60 days since the last till-
age operation. Make applications at least 1 week before a killing frost.
Reed, giant
--
-
2%
Best results are obtained when applications are made in late summer to fall.
Ryegrass,
1-3
3-40
1 %
In annual cropping systems apply 1 to 2 quarts of this product per acre. Apply 1 quart of
perennial
this product in 3 to 10 gallons of water per acre. Use 2 quarts of this product when apply-
ing 10 to 40 gallons of water per acre. In noncrop, or areas where annual tillage (no -till) is
not practiced, apply 2 to 3 quarts of this product in 10 to 40 gallons water per acre.
For best results, apply when most plants have reached the boot -to -head stage of growth
or in the fall prior to frost. Do not tank -mix with residual herbicides when using the 1
quart per acre rate.
Smartweed„
3-5
3-40
2%
Apply when most plants have reached the early bud stage of growth.
swamp
Also for control, apply 16 fluid ounces of this product plus 0.5 pound a.i. 2,4-D in 3 to 10
gallons of water per acre in the late summer or fall.
Sowthistle,
2-3
3-40
2%
Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing
perennial
or tillage in the late summer or fall, allow at least 4 weeks for initiation of active growth
and rosette development prior to the application of this product. Fall treatments must be
applied before a killing frost. Allow 3 or more days after application before tillage.
Spurge, leafy
µ
3-10
2%
For suppression, apply 16 fluid ounces of this product plus 0.5 pound a.i. 2,4-D in 3 to 10
gallons of water per acre in the late summer or fall. If mowing has occurred prior to treat-
ment, apply when most of the plants are 12 inches tall.
Starthistle, yellow
2
10-40
2%
Best results are obtained when applications are made during the rosette, bolting and early
flower stages.
Sweet potato, wild
-
2%
Partial control. Apply to plants that are at or beyond the bloom stage of growth. Repeat
applications may be required.
Thistle, artichoke
-
-
2%
Partial control. Apply to plants that are at or beyond the bloom stage of growth. Repeat
applications may be required.
Thistle, Canada
2-3
3-40
2%
Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing
or tillage in the late summer or fall, allow at least 4 weeks for initiation of active growth
and rosette development prior to the application of this product. Fall treatments must be
applied before a killing frost. Allow 3 or more days after application before tillage.
For suppression, apply 1 quart of this product, or 1 pint of this product plus 0.5 pound
a.i. 2,4-D, in 3 to 10 gallons of water per acre in the late summer or fall after harvest,
mowing or tillage. Allow rosette regrowth to a minimum of 6 inches in diameter before
treating. Applications can be made as long as leaves are still green and plants are actively
growing at the time of application. Allow 3 or more days after application before tillage.
Timothy 2-3 3-40 2% For best results, apply when most plants have reached the boot -to -head stage of growth.
Torpedograss 4-5 3-40 2% For partial control. Apply when most plants are at or beyond the seedhead stage of
growth. Repeat applications will be required to maintain control. Fall treatments must be
applied before frost.
(continued)
27
WEED SPECIES
RATE
WATER
HAND-HELD
COMMENTS
(QT/A)
VOL. (GPA)
% SOLUTION
Trumpetcreeper
2
5-10
2%
Partial control. Apply in late September or October, to plants which are at least 18 inches
tall and have been growing 45 to 60 days since the last tillage operation. Make applica-
tions at least 1 week before a killing frost.
Vaseygrass
3-5
3-20
1 2%
Apply when most plants are in the early head stage.
Velvetgrass
3-5
3-20
2%
Apply when most plants are in the early head stage.
Wheatgrass,
2-3
3-40
2%
For best results, apply when most plants have reached the boat -to -head stage of growth.
western
12.1 — PERENNIAL WEEDS — Bromus Species and Medusahead
For Use in the States of Colorado, Idaho, Iowa, Kansas, Montana, Nebraska, North Dakota, Oregon, South Dakota, Utah, Washington, and Wyoming Only
Bromus Species: This product may be used to treat downy brome (Bromus tectorum), Japanese brome (Bromus japonicus), soft chess (Bromus mollis) and cheatgrass
(Bromus secalinus) found in industrial, rangeland and pasture sites. Apply 8 to 16 fluid ounces of product per acre on a broadcast basis. For best results, treatment should
coincide with early seedhead emergence of the most mature plants. Delaying the application until this growth stage will maximize the emergence of other weedy grass
flushes. Applications should be made to the same site each year until seed banks are depleted and the desirable perennial grasses are able to become reestablished on
the site.
Medusahead: To treat medusahead, apply 16 fluid ounces of this product per acre as soon as plants are actively growing, and prior to the 4-leaf stage. Applications may
be made in the fall or spring.
Application Equipment and Techniques: Applications may be made using ground or aerial equipment. Aerial applications for these uses may be made using fixed wing or
helicopter equipment. For aerial applications, apply in 2 to 10 gallons of water per acre. For applications using ground equipment, apply in 10 to 20 gallons of water per acre.
When applied as directed there are no grazing restrictions.
13.0 — WOODY BRUSH AND TREES RATE TABLE ALPHABETICALLY BY SPECIES
Apply this product after full leaf expansion, unless otherwise directed. Use the higher rate for larger plants and/or dense areas of growth. On vines, use the higher rate for
plants that have reached the woody stage of growth. Best results are obtained when application is made in late summer or fall after fruit formation.
In and areas, best results are obtained when applications are made in the spring to early summer when brush species are at high moisture content and are flowering.
Unless otherwise directed, apply broadcast treatments in 3 to 40 gallons of water per acre. Ensure thorough coverage when using hand-held equipment. Symptoms may
not appear prior to frost or senescence with fall treatments.
Allow 7 or more days after application before tillage, mowing or removal. Repeat treatments may be necessary to control plants regenerating from underground parts or
seed. Some autumn colors on undesirable deciduous species are acceptable provided no major leaf drop has occurred. Reduced performance may result if fall treatments
are made following a frost.
WEED SPECIES
RATE (QT/A)
HAND-HELD %SOLUTION COMMENTS
Alder
3-4
1-1.5% For control
Ash
2-5
1-2%° Partial control
Aspen, quaking
2-3
1-1.5% For control
Bearmat (Bearclover)
2-5
1-2% Partial control
Beech
2-5
1-2% Partial control
Birch
2
1 % For control
Blackberry
3-4
1-1.5% For control. Make applications after plants have reached full leaf maturity. Best results
are obtained when applications are made in late summer or fall. Applications may also
be made after leaf drop and until a killing frost or as long as stems are green. After
berries have set or dropped in late fall, blackberry can be controlled by applying a 3/
percent solution of this product. For control of blackberries after leaf drop and until a
killing frost or as long as stems are green, apply 3 to 4 quarts of this product in 10 to
40 gallons of water per acre.
Blackgum
2-5
1-2% For control
Bracken
2-5
1-2% For control
Broom; French, Scotch
-
1.5-2% For control
Buckwheat, California
-
1-2% For partial control. Thorough coverage of foliage is necessary for best results.
(continued)
28
WEED SPECIES
RATE (QT/A)
HAND-HELD %
COMMENTS
SOLUTION
Cascara
2-5
1-2%
Partial control
Catsclaw
-
1-1.5%
Partial control
Ceanothus
2-5
1-2%
Partial control
Chamise
-
1 %
For control. Thorough coverage of foliage is necessary for best results.
Cherry; bitter, black, pin
2-3
1-1.5%
For control
Coyote brush
1.5-2%
For control. Apply when at least 50 percent of the new leaves are fully developed.
Dogwood
2-5
1-2%
Partial control
Elderberry
2
1 %
For control
Elm
2-5
1-2%
Partial control
Eucalyptus
2%
For control of eucalyptus resprouts, apply when resprouts are 6 to 12 feet tall. Ensure
complete coverage. Avoid application to drought -stressed plants.
Florida holly
2-5
1-2%
Partial control
(Brazilian Peppertree)
Gorse
2-5
1-2%
Partial control
Hasardia
1-2%
Partial control. Thorough coverage of foliage is necessary for best results.
Hawthorn
2-3
1-1.5%
For control
Hazel
2
1%
For control
Hickory
2-5
1-2%
Partial control
Honeysuckle
3-4
1-1.5%
For control
Hornbeam, American
2-5
1-2%
Partial control
Kudzu
4
2%
For control. Repeat applications may be required to maintain control.
Locust, black
2-4
1-2%
Partial control
Madrone resprouts
2%
Partial control. Apply to resprouts that are 3 to 6 feet tall. Best results are obtained with
spring/early summer treatments.
Manzanita
2-5
1-2%
Partial control
Maple, red
2-4
1-1.5%
For control, apply a 1 to 1.5 percent solution when at least 50 percent of the new leaves
are fully developed. For partial control, apply 2 to 4 quarts of this product per acre.
Maple, sugar
1-1.5%
For control. Apply when at least 50 percent of the new leaves are fully developed.
Monkey flower
1-2%
Partial control. Thorough coverage of foliage is necessary for best results.
Oak; black, white
2-4
1-2%
Partial control
Oak, post
3-4
1-1.5%
For control
Oak; northern, pin
-
1-1.5%
For control. Apply when at least 50 percent of the new leaves are fully developed.
Oak, southern, red
2-3
1-1.5%
For control
Persimmon
2-5
1-2%
Partial control
Pine
2-5
1-2%
For control
Poison ivy/Poison oak
4-5
2%
For control. Repeat applications may be required to maintain control. Fall treatments
must be applied before leaves lose green color.
Poplar, yellow
2-5
1-2%
Partial control
Redbud, eastern
2-5
1-2%
For control
Rose, multiflora
2
1 %
For control. Treatments should be made prior to leaf deterioration by leaf -eating insects.
Russian olive
2-5
1-2%
Partial control
Sage, black
1 %
For control. Thorough coverage of foliage is necessary for best results.
Sage, white
2-5
1-2%
Partial control
Sage brush, California
-
1 %
For control. Thorough coverage of foliage is necessary for best results.
Salmonberry
2
1 %
For control
(continued)
29
WEED SPECIES
RATE (QT/A)
HAND-HELD %
COMMENTS
SOLUTION
Salt -cedar
2-5
1-2%
For control
Sassafras
2-5
1-2%
Partial control
Sourwood
2-5
1-2%
Partial control
Sumac; poison, smooth,
2-4
1-2%
Partial control
winged
Sweetgum
2-3
1-1.5%
For control
Swordfern
2-5
1-2%
Partial control
Tallowtree, Chinese
1 %
For control. Thorough coverage of foliage is necessary for best results.
Tan oak resprouts
-
2%
For partial control. Apply to resprouts that are less than 3 to 6 feet tall. Best results are
obtained with fall applications.
Thimbleberry
2
1 %
For control
Tobacco, tree
-
1-2%
Partial control
Trumpetcreeper
2-3
1-1.5%
For control
Vine maple
2-5
1-2%
Partial control
Virginia creeper
2-5
1-2%
For control
Waxmyrtle, southern
2-5
1-2%
Partial control
Willow
3
1 1 %
For control
14.0 - CONDITIONS OF SALE AND WARRANTY
The DIRECTIONS FOR USE of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and should be followed
carefully. However, it is impossible to eliminate all risks inherently associated with use of this product. Crop injury, ineffectiveness, or other unintended consequences may
result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of ALBAUGH,
INC., its Supplemental Distributors, or the Seller. All such risks shall be assumed by the Buyer.
ALBAUGH, INC., its Supplemental Distributors and the Seller warrant that this product conforms to the chemical description on the label and is reasonably fit for the
purposes referred to in the Directions for Use subject to the inherent risks referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NEITHER
ALBAUGH, INC. NOR ITS SUPPLEMENTAL DISTRIBUTORS MAKE ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE
OR OF MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. THIS WARRANTY DOES NOT EXTEND TO, AND THE BUYER SHALL BE SOLELY
RESPONSIBLE FOR, ANY AND ALL LOSS OR DAMAGE WHICH RESULTS FROM THE USE OF THIS PRODUCT IN ANY MANNER WHICH IS INCONSISTENT WITH
THE LABEL DIRECTIONS.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER'S EXCLUSIVE REMEDY AND THE EXCLUSIVE LIABILITY OF ALBAUGH, INC., ITS SUPPLEMENTAL
DISTRIBUTORS AND THE SELLER FOR ANY AND ALL CLAIMS, LOSSES, DAMAGES, OR INJURIES RESULTING FROM THE USE OR HANDLING OF THIS PROD-
UCT, WHETHER OR NOT BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY IN TORT OR OTHERWISE, SHALL BE LIMITED, AT THE MANUFACTURER'S
OPTION, TO REPLACEMENT OF OR THE REPAYMENT OF THE PURCHASE PRICE FOR THE QUANTITY OF PRODUCT WITH RESPECT TO WHICH DAMAGES ARE
CLAIMED. When Buyer suffers losses or damages resulting from the use or handling of this product (including claims based on contract, negligence, strict liability, or
other legal theories), Buyer must promptly notify Seller in writing of any claims to be eligible to receive either remedy stated above. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, IN NO CASE SHALL ALBAUGH, INC., ITS SUPPLEMENTAL DISTRIBUTORS, OR THE SELLER BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR
INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. ALBAUGH, INC., its Supplemental Distributors, and the Seller offer this
product, and the Buyer accepts it, subject to the foregoing Conditions of Sale and Warranty, which may be varied only by agreement in writing signed by a duly authorized
representative of ALBAUGH, INC.
No employee or agent of ALBAUGH, INC., its Supplemental Distributor, or the Seller is authorized to vary or exceed the terms of this Warranty in any other manner.
Folex® is a registered trademark of Bayer CropScience.
PrepTM is a trademark of Bayer CropScience.
Banvel®, Clarity®, Frontier®, Guardsman®, Marksman®, Prowl®, Pursuit®, Pursuit® Plus, Scepter® and Squadron® are registered trademarks of BASF Corporation.
DEF® and Sencor® are registered trademarks of Bayer Corporation.
Broadstrike®, Goal®, Surflan®, Surpass®, and TopNotch® are registered trademarks of Dow AgroSciences LLC.
Bladex®, Canopy®, Extrazine®, Gemini®, Krovar®, Lexone®, and Preview® are registered trademarks of E.I. duPont de Nemours and Company.
Command® is a registered trademark of FMC Corporation.
Bullet®, Harness®, Lariat®, Lassa®, Micro -Tech®, Partner®, Permit®, and Roundup Ready® are registered trademarks of Monsanto Co.
Sim-TrolTM is a trademark of Oxon Italia Company.
Bicep®, Dual®, Fusion®, Princep®, Solicam®, and Turbo® are registered trademarks of Syngenta Crop Protection, Inc.
Devrinol® is a registered trademark of United Phosphorous Inc.
30
34MOM5
- ,.
IO
� Harrellys
Inventory #: 884076 Batch #: 1810-1632
GUARANTEED ANALYSIS
Total Nitrogen(N)......................................................... 34.0000%
34.0000% Urea Nitrogen
Soluble Potash(K20)........................................................ 5.0000%
Derived From: Muriate of Potash, Urea
Chlorine (CI), Not more than ........................................ 3.8710%
F352 Density - 52 lb./cu. ft.
NOTICE: MAY CAUSE STAINS ON CONCRETE. Sweep or blow, Do Not Wash particles that land on hard surfaces.
Directions for Use
Information regarding the contents and levels of metals in this product is available on the internet at: http://www.aapfco.org/metals.htm]
FOR USE ONLY BY PROFESSIONAL APPLICATORS AND COMMERCIAL GROWERS
NOT INTENDED FOR SALE TO, OR USE BY CONSUMERS (HOMEOWNERS)
Apply fertilizer in accordance with best management practices established by your State University or Extension Service. Observe State or Local regulations
pertaining to fertilizer content, timing of application and rates. In MD, this product is providing nutrients as determined to be necessary in accordance with a
soil test that was conducted by a laboratory identified under 8-803.7 of this article and performed no more than 3 years before the application. In MD, NH, NJ,
VA: Application of a product containing phosphorus to turf is limited to establishing turf in the first growing season, repairing or renovating turf, or may be
applied to established turf where a soil test performed within 3 years indicates a phosphorus deficiency. In MD, NH, NJ, VA: Application rates of soluble
nitrogen are not to exceed 0.7 lb soluble N/1,000 sq.ft./application. (In VA - no more than 1.0 lb.) Do not apply near water, storm drains, or drainage ditches.
Do not apply if heavy rain is expected. Apply this product only to turf/garden areas and sweep any product that lands on hard surfaces back onto the treated
area. For information on the components in this fertilizer, write to Harrell's, LLC at the address below. Include the Inventory # or Batch # printed on the product
label.
Florida Specific Requirements for Fertilizer Use: For applications to Sports Turf, Golf Courses, Parks and Athletic Fields: 1.) DO NOT exceed fertilizer rates
recommended in the document titled SL 191, "Recommendations for N,P,K and Mg for Golf Course and Athletic Field Fertilization Based on Mehlic III
Extractant". 2.) Follow "Best Management Practices for the Enhancement of Environmental Quality on Florida Golf Courses" published by the Florida
Department of Environmental Protection. 3.) For all fertilizer uses other than as a specialty fertilizer on urban turf: DO NOT exceed rates recommended in the
document titled "Florida Friendly Best Management Practices for Protection of Water Resources by the Green Industries", published by the Florida
Department of Environmental Protection.
1810-1632 311810
r N� Warning �1w0�"r111111�� First id
u If in Eves: Flush with water for 15 minutes. Call a doctor for treatment advice if
" „o1 111l irritation persists.
tii ,oit Dust may cause Serious Eye Damage �``"S 1100 If on Skin: Wash thoroughly with soap and water. Launder clothing before reuse.
Shin, Eye and Respiratory Tract Irritant. Harmful if swallowed.0 If Inhaled: Remove affected person from source of exposure. Call 911 if breathing is
difficult.
If Ingested: Do not induce vomiting. Get medical attention
f" tft 1 6 1fy, t f+ M11 nt's;., Wear safety glasses with side shields or goggles Have the product label with you when calling a doctor or going for treatment
when handling product. Avoid breathing dust. Wash face, hands and exposed skin
thoroughly after handling. Do not eat, drink or use tobacco products when using this
product.
MANUFACTURED AND GUARANTEED BY HARRELUS, LLC PO BOX 807 LAKELAND, FL 33802 (863) 687-2774 (800) 282-8007