PSA - Abonmarche - Jefferson Re-Striping from Eddy to Logan

Home Browse Search

This is EXHIBIT A, consisting of 9 pages, referred to in and part of the Agreement between Owner and Engineer for Professional Services dated July 26, 2016. Services Article 1 of the Agreement is supplemented to include the following agreement of the parties. Engineer shall provide Basic and Additional Services as set forth below. PART 1— BASIC SERVICES A1.01 Project Scope The proposed project consists of re -striping Jefferson Boulevard to establish one travel lane and a bike lane in each direction along with a center left turn lane from Eddy Street to Logan Street. The layout and design for this area will utilize the "complete streets" philosophies as a guide. Existing left turn lanes at signalized intersections will be maintained. Any signal adjustments required will be performed by the City. The project will be bid in two divisions. Division A will include hydrodemo of existing striping and Division B will including thermoplastic striping. The base bid for each will include the road from Eddy Street to Ironwood Road and an alternate will be provided in each Division from Ironwood Road to Logan Street. New signs will likely be required to identify the bike lane. Quotes will be solicited for the work from companies approved by the City. SCOPE OF SERVICES The scope of services proposed herein includes the survey, design and development of bid documents for the project. When requested, Engineer shall submit detailed scope and fees for defined tasks to a representative of the Board of Public Works for approval. Services for this project are expected to generally include the following items. A1.02 Preliminary Design Phase A. After acceptance by Owner of the Report and any other deliverables, selection by Owner of a recommended solution and indication of any specific modifications or changes in the scope, extent, character, or design requirements of the Project desired by Owner, and upon written authorization from Owner, Engineer shall: 1. Prepare Preliminary Design Phase documents consisting of construction documents (60% - including final design criteria, preliminary drawings, outline specifications, and written descriptions of the Project). Provide necessary field surveys and topographic and utility mapping for design purposes. Utility mapping will be based upon information obtained from utility owners. (Exhibit A— Engineer's Services) EJCDC E-500 Agreement Between Owner and Engineer for Professional Services Copyright © 2008 National Society of Professional Engineers for EJCDC. All rights reserved.