9587-05 - Annexation Adams Rd. District 1

Home Browse Search

AREA C — SOUTHEAST QUADRANT SIGNAGE REQUIREMENTS The signs will also contain masonry in the bases. These signs will be internally illuminated and will have landscape around them. Secondary MID Development Signs (SMS): There are places of entry into the development where secondary signs could be placed that would contain the same information as the MHS but much smaller. They would simply compliment the highway signs and serve as reference points for those coming to the development to know where the access and exit points are located. There may be up to four of these signs all internally illuminated with each sign being between 10' to 20' over all height depending on each sign's specific location and environment. Monument Signs (MS): Every building within with development will have a monument sign with either the name of the building occupant if a single user, or the name of the building if a multi- tenant use. These signs would be freestanding and double sided and would be constructed to compliment the SMS using similar materials and colors and design features. Each sign would be 8' to 12' in length and 6' to 8' in height. The signs will be illuminated internally or with spotlights in the landscape area around them. For a lot with no street frontage, a monument sign may be located in a signage easement on an adjacent parcel with no minimum separation requirements from adjacent monument signs. Tenant/Building Signs (TS): Building signs will have a consistent look that is controlled by the developer. Building signs mounted on the front fagade of the building shall not exceed 10% of the total building fagade, and building signs mounted on the rear or side facades of a building shall not exceed 5% of the total building fagade. All signs on each building will be consistent in style of construction, materials and colors to be determined by the developer. All signs will affix the same way on each building and will incorporate the same mounting method to be determined by the AmeriPlex Architectural Committee (AAC) No raceways or box signs or projecting signs allowed and no signs shall extend beyond the roofline. The signs will be illuminated using external sources of light; spotlights, building mounted lights, etc. All building sign designs must be submitted to the developer for approval prior to installation. All signs must have concealed fasteners or exposed used stainless or non - corrosive materials. All penetrations of the building structure shall be neatly sealed and watertight. Page 2 of 4