Laserfiche WebLink
(d) Single Family and Two-Family Residential <br /> All new single family and two-family residential construction shall comply with the following <br /> regulations: <br /> (1) Single Family and Two-Family Residential Building Massing <br /> (A) Angular or curved building massing is prohibited. <br /> • (B) Building heights shall not be less than one (1) story or fifteen feet(15') <br /> and shall not exceed two-and-a-half(2 %) stories or thirty-five feet (35'). <br /> (C) Front entry door(s) shall be located on the Primary Building Frontage and <br /> shall face the Primary Street. <br /> (D) A Front Porch or Portico is required and shall be attached to the Primary <br /> Building Frontage. A Porch shall have a minimum depth of six feet (6') <br /> and cover a minimum of fifty percent (50%)of the Primary House Form. <br /> A Portico shall have a minimum depth of four feet(4') and cover a <br /> minimum of thirty percent (30%) of the Primary House Form, as <br /> referenced in the accompanying graphic. <br /> [fi FE <br /> r <br /> F—R1 �- -1 <br /> r <br /> 4--250% I I I a30% <br /> PORCH PORTICO <br /> (2) Single Family and Two-Family Residential Roof Shapes <br /> (A) Hipped and gabled roofs are acceptable roof types. <br /> (B) Mansard,mock mansard, flat and barrel roofs are prohibited. Flat roof <br /> forms may only be used on the house's Entry Form (e.g. Porch or Portico) <br /> and Secondary Additive Form. <br /> (C) Eaves shall have a maximum overhang of three feet(3'). <br /> (3) Single Family and Two-Family Residential Building Design and Materials <br />