Laserfiche WebLink
Section 21 -07.03 <br />Sign Regulations <br />(e) On- Premise Signs: MU & CBD Districts <br />(C) Projecting Building Identification Signs. <br />i. Maximum Height of Projecting Building Identification Signs. <br />Projecting building identification signs shall not extend ten (10) feet <br />above the roof line. <br />ii. Sign Surface Area. <br />a. Total Area — The sign surface <br />area of a projecting building <br />identification sign shall not <br />exceed the sign surface area <br />allocated to either: lower <br />level building identification <br />signs; or, upper level building <br />identification signs, whichever <br />is applicable based upon the <br />location on fagade of the <br />building upon which the <br />projecting building <br />identification sign is attached. <br />a <br />Sign Split between Upper and <br />Lower Levels — In the case of <br />a projecting building Projecting Sign <br />identification sign located <br />partially as a lower level sign <br />and partially as an upper level sign, the sign surface area <br />regulations regarding upper level building identification <br />signs shall apply. <br />C. Corner Lots — In the case of a projecting building <br />identification sign located on the comer of a building <br />oriented toward the intersection of two or more streets, <br />such corner projecting building identification sign shall <br />count against the total sign surface area of building <br />identification signs authorized on the smaller front fagade. <br />4 <br />Ord. No.: 9495 -04 <br />