1. 2257 Portage Avenuet_COA 2026-0803 PACKET

Home Browse Search

ASTM D6694 PHYSICAL PROPERTIES ASTM Test Result Requirement Tensile Strength @ 73°F D2370 275 psi 150 min Elongation at Break @ 73°F D2370 196% 100 min Tensile Strength @ 0°F D2370 176 psi 150 min Elongation at Break @ 0°F D2370 113% 100 min Tear Resistance (Die C) D624 24 lbf/inch 20 min Permeance – 20 mils DFT @ 73°F / 50% RH E96 – B 6.4 Perms 2.5 min Wet Adhesion Spray Polyurethane Foam C794 / D903 Pass 2.0 min A4271 Acrylic BleedTrap Base Coat C794 / D903 Pass 2.0min EPDM C794 / D903 Pass 2.0min PVC C794 / D903 Pass 2.0min CRRC Rapid SOLAR PERFORMANCE ASTM Test Initial Rating (Lab-Aged) Solar Reflectance C1549 0.87 0.81 Thermal Emittance C1371 0.89 0.88 CEMENTS AND COATINGS FOR ROOFING SYSTEMS CLASSIFIED BY UNDERWRITERS LABORATORIES INC. AS TO AN EXTERNAL FIRE EXPOSURE ONLY 60PO DESCRIPTION GacoFlex S42 Series coatings are high adhesion, solvent-free, single-component waterproof elastomeric moisture-curing silicone coatings. USAGE GacoFlex S42 Series may be used as a maintenance coating system over pre-existing elastomeric roof coatings, metal roofs, APP*, SBS*, BUR*, and weathered single ply membranes (EPDM, PVC, Hypalon®, and TPO/CPA) on a roofing substrate where the membrane surface is in sound condition, but requires a renewal of the membrane surface due to the normal effect of aging and use. A roof coated with GacoFlex S42 Series is ideal for use as part of a rainwater catchment system (NSF certification in process). GacoFlex S42 Series Coatings are suitable liquid applied silicone coatings used in sprayed-in-place polyurethane foam roofing systems. GacoFlex S42 Series Coatings may also be used over concrete and other coatings. GacoFlex S42 may also be used over some asphaltic substrates, such as modified bitumen, when properly applied over an approved base coat, such as with GacoFlex A4271 BleedTrap™ Base Coat; please contact Firestone Building Products for specific recommendations. When properly applied, the coating system helps provide a seamless weather-tight seal that protects the substrate from degradation caused by ultraviolet light, water and other normal weathering hazards. * Please note that a base coat of BleedTrap is required for SBS substrates and recommended for APP and BUR prior to coating with GacoFlex S42. Not to be used over gravel surfaced BUR’s. COLORS S4200 White, S4222 Gray**, S4248 Tan**; S4229 Dark Gray** (custom colors available as special orders only). **colors not to be used over asphalt systems. APPLIED PRODUCT DATA WEATHERABILITY Excellent durability, color stability and chalk resistance. TOXICITY Not for use in contact with edible substances or for long-term storage of potable water. CHEMICAL RESISTANCE Excellent solvent and chemical resistance. PACKAGED PRODUCT DATA THEORETICAL COVERAGE 1.25 gallons per 100 sq. ft. to yield approximately 18 dry mils. On granulated and other rough surfaces, apply one coat at the rate of 1.75 gallons per 100 square feet. NOTE: Application rate is job specific and losses due to overspray, surface profile, and wind may occur. Additional material may be required to achieve dry film thickness. SOLIDS Weight: 96% (ASTM D1644) / Volume: 95% (ASTMD2697) VOC <50 g/l (<0.417 lb/gal) FLASH POINT ASTM D3278 178°F (81°C) STORAGE STABILITY Two years from date of manufacture when stored in sealed containers between 0°F - 80°F (-17°C - 26°C). APPLICATION MIXING Mix before application to ensure uniform color and consistency. THINNING Thinning is not recommended under normal conditions. ASPHALT ROOFING SEALER To help inhibit bleed-through on asphaltic and bitumen-containing substrates, first apply 1 coat of GacoFlex A4271 BleedTrap Base Coat for Asphalt Roofing at a rate of 100 sq. ft. per gallon to yield 6 dry mils. PRIMER When GacoFlex E5320 2-Part Epoxy Primer/Filler is necessary, such as on some single ply membranes, priming should be done in accordance with label directions. An anti-corrosive metal primer may be used on ferrous metal roofs to help prevent corrosion. APPLICATION Apply by brush or ¾” nap woven roller as received. For spray application, use as received; consult Gaco Western’s Silicone Spray Guide SG-Silicone for more information. For cold weather application, keep material stored above 65°F (18°C). Do not apply if rain is expected within 1 hour. For application in temperatures below freezing or above 120°F (49°C), contact Firestone Building Products. On smooth surfaces, apply one coat at the rate of 1.25 gallons per 100 square feet to achieve approximately 18 dry mils. On granulated and other rough surfaces, apply one coat at the rate of 1.75 gallons per 100 square feet. Coat all surfaces including expansion joint covers and flashings. Extra material is required at all edges and penetrations. NOTE: Application rate is job-specific and losses due to overspray, surface profile and wind may occur. Additional material may be required to achieve 18 dry mils. DRY TIME Final coat should be allowed to cure 24 to 48 hours, depending on temperature and humidity, before suitable for light foot traffic. MKGF0 818 © 2018 Firestone Building Products Company, LLC GacoFlex S42 Series gaco.com | 800 456 4226Gaco is a Firestone Building Products brand. CLEAN UP Clean application tools and equipment with GacoFlex™ Silicone Solvent. Recirculate through lines and gun until residual coating is removed. DO NOT USE WATER OR RECLAIMED SOLVENTS. For specific Safety and Health information please refer to Safety Data Sheet. High Adhesion 100% Silicone Coating Solar Reflectance Index (SRI) E1980 110 101